Construction of Source work, CWR and S/Laying of Supply main and all other appurtenant works etc Complete under Augmentation and Retrofitting (FHTC) work Bhakuna drinking water Scheme in Takula Block Distt Almora

Amount

Providing of all materials, carting from Rail head Kathgodam to site of work, laying & jointing of G.I. Medium screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc.) in trenches with its cutting, threading and testing of pipe line etc complete.

Medium Duty (class 'B') 15 mm (For house connection)

Medium Duty (class 'B') 20 mm

Medium Duty (class 'B') 25 mm

Medium Duty (class 'B') 32 mm

Medium Duty (class 'B') 40 mm

Medium Duty (class 'B') 50 mm

Medium Duty (class 'B') 65 mm

Excavation in soil mixed with single boulders etc. requiring the use of special T&P, if any, for pipe line trenches including lift up to 1.5m and lead up to 30m with back filling, watering, ramming of excavated earth in the trenches.

Dismantling of following dia screwed and socketed G.I. Pipes, specials and fittings including taking out of dismantled G.I. pipes and specials from trenches and stacking them properly within 50 m but excluding the cost of earth work.

Medium Duty (class 'B') 20 mm

Medium Duty (class 'B') 25 mm

Medium Duty (class 'B') 32 mm

Relaying of dismantled G.I.Pipe in true alignment in trenches including supply of all materials,labour,T&P etc. complete.

Medium Duty (class 'B') 20 mm

Medium Duty (class 'B') 25 mm

Medium Duty (class 'B') 32 mm

Supply and fixing of the following fittings including cartage of materials, labour, T & P etc complete but excluding the cost of excavation and chamber.G.M. Wheel valves (Class I) as per IS 778/1971

20 mm dia.

25 mm dia.

32 mm dia.

50 mm dia.

Construction stone masonry chamber 60x60x60 cm, inside in 1:4 cement & sand mortar with MS MH cover on top the chamber with proper locking arrangement. Wheel Valve chamber /bulk water meter chamber

Providing and fixing brass ferrule 15mm dia. nominal bore for domestic connections.

Providing and fixing of PTMT bib cock 15 mm dia. nominal bore for domestic connections.

Making ferrule connection in the existing main of G.I, A.C, PVC or any type of pressure mains with saddle piece, service connections, fittings and fixing of ferrule including

Testing of all materials used in water supply as per specific IS standards from an ISO 9001-2015&ISO/IEC 17025:2017 accredited laboratory and also having accreditation by National Accreditation Board for Testing and Calibration Laboratories as below. G.I. Pipe for Physical & Chemical properties as per IS:1239 complete per pipe sample required 1mtr.x3pcs.

Supply and fixing of information amd sign with logo of jal jeevan mission Board of work at site

Supply of all materials, labour and T & P etc. and construction of R.C.C. Clear Water Reservoir of following Capacity in K.L. as per type design and drawing including fixing of pipes and fittings.

12.50 KL Capacity

15.00 kl capacity

17.5 kl capacity

Earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 mtr in width or 10 sqm on plan) including dressing of sides and ramming of bottom, lift up to 1.5 mtr including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m in all kind of soil.

All Kinds Of Soil

Ordinary Rock

Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall bestrutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (sed. minimum), between the two posts fitted and fixed with G.I.staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire u With G.I. barbed wireFencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines

Reinforcement for R.C.C. work including straightening, cutting, banding, placing in position and binding all complete reinforcement for RCC work using thermo mechanically treated bars.

Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.Angle Section (40x40x6)

Finishing with Deluxe Multi surface paint system for interiors andexteriors using Primer as per manufacturers specifications :Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

PLASTERING with cement mortar 1:4

Centering & shuttering including strutting, roping etc. and removal of form work for walls (any thickness) including attached pilasters, buttresses, plinth and string coarse etc.

Random rubble masonry laid dry in breast walls, retaining walls etc. including supply of all material, labour, T&P and royalties etc. complete .

R.R. stone masonry in 1:6 cement and local sand mortar in foundation and plinth including supply of all materials, labour, T&P etc. required fro the proper completion of work.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level in 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)

LAXMAN SINGH