Installation of new MSSR at Rajkot International Airport, Rajkot (SH Electrical Works Cable laying and other associated works)

Amount

Supply of LED type 33-36 watt recess/suspended slim LED 2'x2' panel integral light luminaries with powder coated rim complete including LED driver as required suitable for the operation on 230V, 50 Hz AC supply with all accessories complete as required & as per technical specification.

Supply of LED type 10-12 watt recess/suspended slim LED integral light luminaries with powder coated rim complete including LED driver as required suitable for the operation on 230V, 50 Hz AC supply with all accessories complete as required & as per technical specification.

Supply of LED type 45-50 watt integral street light luminaries (IP-66) with pressure die cast aluminium housing and heat resistant toughened glass complete including LED driver suitable for the operation on 230V, 50 Hz AC supply with all accessories complete as required & as specified.

Supply of Emergency Light (LED) portable including handle to move.

Supply of 1200mm sweep five star ceiling fan with regulator and all standard accessories etc., complete as required.

Supply of 400mm sweep five star wall fan suitable for the operation on 230V, 50 Hz AC supply with all accessories complete as required & as specified.

Supply of 300mm sweep, 900RPM heavy duty exhaust fan with all standard accessories etc., complete as required.

Supply of LED type obstruction light luminaries with die - cast aluminium housing with Red polycarbonate dome powder coated and IP 65 protection level complete including integral/ seperate LED driver as required suitable for the operation on 230V, 50 Hz AC supply with all accessories complete as required & as per technical specification.

Supply of 0.5 hp water pump for pumping water suitable to opearte in 230V, 50Hz AC Supply.

Supplying and fixing of 32mm dia G.I. pipe (medium class) for installation of street light fiting including bending the pipe to the required shape and clamp arrangement complete as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation of wall fans / ceiling fan; including wiring the down rods of ceiling fans with length upto 90 cm as per site requirement; and making connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation of 300 mm sweep exhaust fan in the existing opening, including supply and installation of suitable size (according to existing wall opening) metal louver shutter and making good the damage, connection, testing, commissioning etc. as required.

SITC of 40KVA online UPS (microprocessor based) having single phase AC input of voltage range 340 volt to 480 volt at 50Hz ± 1% and Three phase AC output of voltage range 415 volt ± 10% at 50Hz ± 1% , along with battery bank composed of Sealed Maintenance Free (SMF) batteries with battery backup of 30 minutes.

Supply of XLPE insulated and PVC sheathed aluminium conductor armoured cable of 1.1 KV grade conforming to IS : 7098 (Part : - I)/1988 with upto date amendments etc.,as required.of following sizes : a) 3.5 X 300 Sq.mm

Supply of PVC / XLPE insulated and PVC sheathed Copper conductor armoured cable of 1.1 KV grade conforming to IS : 7098 (Part :- I)/1988 with upto date amendments etc.,as required.of following sizes : a) 4 x 16 sqmm

Supply and laying of following size DWC HDPE ISI marked along with all accessories like socket, bend, couplers etc. confirming to IS 14930, Part - II complete with fittings and cutting, jointing etc. direct in ground/ Hard rock (75 cm below ground level ) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. a) 120 mm dia (OD -120 mm & ID -103 mm nominal )

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL/ HDPE pipe as required. a) Above 185 sq. mm and upto 400 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL/ HDPE pipe as required. a) upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in masonary open duct etc as required. a) Above 185 sq. mm and upto 400 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in masonary open duct etc as required. a) upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface etc. as required. a) Above 185 sq. mm and upto 400 sq. mm (Clamped with 40x 3 mm MS flat clamp)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface etc. as required. a) upto 35 sq. mm (Clamped with 1.0 mm thick saddle)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on Cable tray etc. as required. a) upto 35 sq. mm (Clamped with 1.0 mm thick saddle)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 3.5 x 300 sqmm

Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 4 x 16 sqmm

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 3½ X 300 sq. mm.

Providing, laying and fixing following dia G.I. pipe (medium class) in ground/ road/ hard soil complete with G.I. fittings including trenching (75 cm deep)and re-filling and making the same surface etc as required 100 mm dia

Supplying and making cable route marker with suitable cement concrete foundation and MS plate of size 60 cm X 60 cm x 3mm mounted on FRP/GRP pole of 4 feet height protruding out of ground, with cable diection indicators and nomenclature painted on MS plate as per the instrcution of EIC

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm Copper strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50 mm)

Providing and fixing 25 mm X 5 mm Copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm Copper strip on surface or in recess for connections etc. as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Providing and fixing Copper tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)

Providing and fixing Copper tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)

Jointing copper / G.I. tape (with another copper / G.I. tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc. as required.

Providing and fixing lightining strike counter, Type I+II with discharge current 100kA (10/350us), Threshold current 1kA (8/20us), degree of protection IP-65. Make - DEHN DLSC 100 IP65 or equivalent.

SITC of Dust & vermin proof Indoor type Single door Floor Mounted panel of suitable size on angel iron frame/ flate iron frame work and to withstand rough usage. The panel shall be fabricated with 14 SWG MS sheet complete with all accessories suitable angle/ channels frame, gland plates, painting etc. including supplying and fixing of following accessories and making inter connection, earth connection, neutral link, etc.as per the drawing and site requirement. [PTTA Panel ] Incomer: 160A, MCCB, 4P, 35-37 KA (Icu= 100% Ics) with extended rotary handle and spreaders - 02 Nos. Multi function meter (Shows Voltage, Current & Frequency) with 3 line LCD Display of size 96 x 96 mm. - 02 Nos. Indication Lamp R, Y & B (LED Type) -02 set Datalogger to keep record and monitoring power supply system Changeover: Autochangeover switch with controller, 160A - 01 No. Outgoing: 63A, MCCB, 4P, 25 KA (Icu= 100% Ics) with extended rotary handle - 06 Nos. Indication Lamp R & G (LED type) - 06 Set Other: 200A Copper busbar, 3 Phase & Neutral Mechanical key lock (3 Lock +2 Key) Necessary CT & Control wiring arrangement Power terminal and other accessories Three Phase Surge Protection Device (SPD), width: 4 mod, Type 1 + type 2 SPD according to EN 61643-11, Spark gap technology with follow current limitation i) Fault indication ii) Max. continuous operating voltage: 255 V a.c. iii) Voltage protection level: <= 1.5 kV iv) Lightning impulse current (10/350): 37.5 kA - 02 Nos.

DOSHI ELECTRIC ENGG. CO. (BID ID -809269)

Techno Electricals (BID ID -809943)

Krishsons International Engineers And Consultants (I) Pvt. Ltd (BID ID -809500)

Yash Energy Pvt. Ltd (BID ID -809856)

Industrial Traders (BID ID -809653)