Sardar Sarovar( Narmada) Project

Sr. No. Item Description Total Quantity Unit Rate Amount

(A) Excavation & Earthwork

Demolition including stacking of serviceable

materilas and disposal of unserviceable materials

with all lead and lift.

(I) R.C.C. Work

Clearing and grubbing road land includding

uprooting rank vegetation, grass, bushes, shrubs,

saplings and trees girth upto 300mm removal of

stumps of tress cut earlier and disposal of

unserviceable materials.

A) By Mechanical means in area of light jungle.

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

3 materials and disposing of the excavated stuff upto 7,462.00 Cum 159.3

(B) Dense or Hard soil

Excavation for foundation upto 1.5 m to 3.0 m

including sorting out stacking of useful material &

disposing of the excavated stuff upto any lead

(B) Dense or Hard soil

Excavation for foundation for depth from 3.0 m to

5.0 m including sorting out and stacking of useful

5 materials and disposing off the excavated stuff upto 484 Cum 185.44

(B) Dense or Hard soil

Filling in plinth with sand under floors including

6 watering, ramming, consolidating and dressing etc. 1,366.00 Cum 484.44

Filling foundation and plinth with murrum or

7 selected soil in layers of 20 cm. thickness including 42,850.00 Cum 301.58

watering, ramming and consolidation etc. complete.

Rolling and consolidation of brick bat including

8 filling in depression which occur during the process, 131 Sqm 22.52

with hand roler 8 tonne to 12 tonne.

Filling in foundation and plinth with brick Bats in

layers of 20cm. thickness including watering,

remming and consolidating etc. complete. (upto

Filling in Red soil as aproved by engineer in charge

For ground top layers in including watering,

ramming and consolidating and achieving required

10 density soil must have property of not eroding ,holds 40 Cum 2799.91

water and soft. The rate includes all labour and

machinary and spreading in layers and transportation

Anti termite treatment of lawn area through

Chloropyriphose 20% E.C., 5 liter diluted in

liters water and applying solution @ 1.00 litre

solution per sqm each application in lawn / bed area

(two application) i/c cost of chemical) and as per

direction of officer-in-charge.

Sr. No. Item Description Total Quantity Unit Rate Amount

Conveyance charges of lime murrum building

rubbish earth, manuar of sludge and excavated

12 rock,fly ash & surplus excavated earth from site as 4,885.00 Cum 81.8

directed by etc. complete as directed by EIC.

A) Upto 5.00 Km.

Providing and laying rubble soling, 230 mm thick, in

a compact manner,foudation, road, footpath etc.

using 200 to 230 mm. cut size stones including

filling the gaps with 40mm metal and packing with

stone chips with murrum covering and levelling the

surface after filling the voids including watering,

ramming well and consolidating each layer, as

directed by EIC.

Hiring and operating Mud Pumps incl. cost of fuel

and operator including the cost of to and fro

transportation, laying of the delivery hoses as

15 required, lowering and lifting the pumps as and 306 Hp/Hour 22

when required etc.complete. Set Do As Directed.

(No payment should be allowed for non working

condition of machinery)

(B) Concrete Work

Providing and laying cement concrete 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone

16 aggregates 20 mm nominal size) and curing 1,074.00 Cum 3,555.66

complete excluding cost of formwork in (A)

Foundation and Plinth

Providing, laying controlled cement concrete M

and curing complete including the cost of form

work but excluding reinforcement for reinforced

17 concrete work in: Up to Plinth Level. (Design Mix 897 Cum 4,377.31

or RMC can be use as directed by EIC/PMC.No

Extra Rate can be paid)

Providing, laying controlled cement concrete M

and curing complete including the cost of form

work but excluding reinforcement for reinforced

18 concrete work in: Up to Plinth Level. (Design Mix 113 Cum 5,248.88

or RMC can be use as directed by EIC/PMC.No

Extra Rate can be paid)

Providing, laying controlled cement concrete M

and curing complete including the cost of form

work but excluding reinforcement for reinforced

19 concrete work in:RCC wall (Design Mix or RMC 86 Cum 7,488.80

can be use as directed by EIC/PMC.No Extra Rate

1) RCC wall up to Ground floor slab

Providing, laying controlled cement concrete M

and curing complete including the cost of form

work but excluding reinforcement for reinforced

20 concrete work in: Column (Design Mix or RMC can 75 Cum 7,547.95

be use as directed by EIC/PMC.No Extra Rate can

Sr. No. Item Description Total Quantity Unit Rate Amount

(1) Column Upto Plinth

Providing, laying controlled cement concrete M

and curing complete including the cost of form

work but excluding reinforcement for reinforced

21 concrete work in: Column (Design Mix or RMC can 86 Cum 7,547.95

be use as directed by EIC/PMC.No Extra Rate can

(2) Column up to Ground Floor slab

Providing, laying controlled cement concrete M

and curing complete including the cost of form

work but excluding reinforcement for reinforced

22 concrete work in: Column (Design Mix or RMC can 32 Cum 7,547.95

be use as directed by EIC/PMC.No Extra Rate can

(3) Column First Floor

Providing, laying controlled cement concrete M

and curing complete including the cost of form

work but excluding reinforcement for reinforced

23 concrete work in: Column (Design Mix or RMC can 15 Cum 7,547.95

be use as directed by EIC/PMC.No Extra Rate can

(3) Column Second Floor

Providing, laying controlled cement concrete M

and curing complete including the cost of form

work but excluding reinforcement for reinforced

24 concrete work in: Up to Plinth Level. (Design Mix 192 Cum 6174.87

or RMC can be use as directed by EIC/PMC.No

Extra Rate can be paid)

(A) (8) Plinth beam

Providing and laying controlled cement concrete M

250 and curing complete including the cost of form

work but excluding reinforcement for reinforced

concrete work in: Beam (Design Mix or RMC can

be use as directed by EIC/PMC.No Extra Rate can

(9) Floor beam Ground Floor

Providing and laying controlled cement concrete M

250 and curing complete including the cost of form

work but excluding reinforcement for reinforced

26 concrete work in: Beam (Design Mix or RMC can 57 Cum 6174.87

be use as directed by EIC/PMC. No Extra Rate can

(10) Floor beam First Floor

Providing and laying controlled cement concrete M

250 and curing complete including the cost of form

work but excluding reinforcement for reinforced

27 concrete work in: Beam (Design Mix or RMC can 47 Cum 6174.87

be use as directed by EIC/PMC. No Extra Rate can

(11) Floor beam Second Floor

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and laying controlled cement concrete M-

250 and curing complete including the cost of form

28 work but excluding reinforcement for reinforced 189 Cum 6,592.48

concrete work in:

(24) Grade Slab

Providing and laying controlled cement concrete M-

250 and curing complete including the cost of form

work but excluding reinforcement for reinforced

29 concrete work in:Slab (Design Mix or RMC can be 102 Cum 6,592.48

use as directed by EIC/PMC.No Extra Rate can be

(25) R.C.C. slab Ground Floor

Providing and laying controlled cement concrete M-

250 and curing complete including the cost of form

work but excluding reinforcement for reinforced

30 concrete work in: Staircase (Design Mix or RMC 109 Cum 5899.65

can be use as directed by EIC/PMC. No Extra Rate

(32) Staircase Ground Floor to First Floor

Providing and laying controlled cement concrete M-

250 and curing complete including the cost of form

work but excluding reinforcement for reinforced

31 concrete work in: Staircase (Design Mix or RMC 106 Cum 5899.65

can be use as directed by EIC/PMC. No Extra Rate

(33) Staircase First Floor to Second Floor

Providing and laying controlled cement concrete M-

250 and curing complete including the cost of form

work but excluding reinforcement for reinforced

32 concrete work in : Lintel (Design Mix or RMC can 70 Cum 6250.93

be use as directed by EIC/PMC. No Extra Rate can

(38) Lintel Ground Floor

Providing and laying controlled cement concrete M-

250 and curing complete including the cost of form

work but excluding reinforcement for reinforced

33 concrete work in : Lintel (Design Mix or RMC can 22 Cum 6250.93

be use as directed by EIC/PMC. No Extra Rate can

(39) Lintel First Floor

Providing and laying controlled cement concrete M-

250 and curing complete including the cost of form

work but excluding reinforcement for reinforced

34 concrete work: Chhajja (Design Mix or RMC can 40 Cum

be use as directed by EIC/PMC.No Extra Rate can

(45) Chhajja Ground Floor

Providing and laying controlled cement concrete M-

250 and curing complete including the cost of form

work but excluding reinforcement for reinforced

35 concrete work: Chhajja (Design Mix or RMC can be 16 Cum

use as directed by EIC/PMC.No Extra Rate can be

(46) Chhajja First Floor

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and laying in position Ready Mixed M-

250 grade concrete for reinforced cement concrete

work, using cement content as per approved Design

Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for a

lead up to 10 Kms. having continuous agitated

mixer, manufactured as per mix design of specified

grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of

laying in levels and pattern of bays as detail of

architect and finished with screed board vibrator

vacuum dewatering process and finally finished by

floating, brooming with wire brush etc., finishing

and reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to

accelerate/ retard setting of concrete, improve

workability without impairing strength and

durability as per direction of the Engineer in -

charge. Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained)

The rate shall include cost of side shuttering with

channels, rails, to form panels and groove cutting

etc. including filling the joint with glass

strip/polysulphite complete to use. The rate shall

also include the cost of reinforcement approximate

calculated at 5.14 kg/Smt. Rate for all lead & lift &

as per directed by Engineer in - charge. (Note: -

Cement content considered in this item is @450

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and laying TMT Bar FE 500/500D r

reinforcement for R.C.C. work and bending, binding

37 & placing in position completed upto any floor any 2,47,025.00 Kg

level Thermo Mechanical Treated Bars as per I.S.

(C) Masonry Work

Providing and laying Brick work using common

burnt clay building bricks having crushing strength

not less than 35 kg/Sq. cm. In foundation and plinth

in cement mortar 1:6 (1 cement : 6 fine sand) (B)

Conventional. Up to

1) Plinth level.

39 2) Ground Floor. 544 Cum 4523.17

40 3) First Floor. 161 Cum 4565.52

Providing and laying Half brick masonry in common

burnt clay building bricks having crushing strength

note less than 35 Kg/Sq. Cm. in cement mortar 1:4

(1 cement : 4 coarse sand) in super structure above

plinth level at any floor level.(B) Conventional.

(D) Finishing Work

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing 20 mm thick water proof cement plaster

using water proofing powder 1Kg/1bag of cement

for all floors on brick / concrete wall work using

water proofing materials in C M 1: 4 ( 1 cement

coasrse sand) including finishing with a flooting

coat of neat cement slurry etc complete for all floor.

and shall be guaranteed for minimum period of

years after handing over the completed building by

the main contractor to be finished as directed. Stamp

paper guarantee 10 years to be furnished before

receiving any payment from the client. etc. complete

as directed by EIC.

Inside of Basement wall, Toilet Vertical wall &

Providing 15mm thick cement plaster in single coat

on Rough (Similar)side of single or half brick walls

for interior plastering upto floor two level and

finished even and smooth in (ii) Cement mortar 1:4

(1-cement :4sand)

Providing 15mm thick cement plaster in single coat

on Rough (Similar)side of single or half brick walls

for interior plastering upto floor two level and

finished even and smooth in (ii) Cement mortar 1:4

(1-cement :4sand)

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing 20 mm thick double coat mala cement

plaster on interior brick / concrete work for

plastering comprising of base coat of 12 mm thick

cement plaster in cement mortar (1 Cement :

coarse sand) in rough finishing and 8 mm thick top

coat of cement mortar 1:2 (1 Cement : 2 Coarse

sand) finished with trovel including scaffolding

curing etc. complete.

Providing & laying10 mm. thick cement plaster in

single coat on fair side of brick concrete walls &

ceilings for interior plastering upto floor two level

and finishing with smooth mala plaster.(i) Cement

mortar 1:3 (1 cement : 3 sand)

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and applying 2mm thick Texture Plaster

of Earthen Textures, Travertino Texture, Coral

texture or equivalent make incorporating fine

filaments made of polymer and aggregating natural

stone powder with making grooves (4 x 15 mm) or

47 as per drawings on existing base coat of 20 mm 1,406.00 Sqm

thick smooth mala plaster etc. Complete with two

coat Exterior weather proof paint and one coat of

primer in any shade As per drawings and design

supplied by architect and instruction given by

authority and E.I.C. for all floor all height.

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing 8 mm Luxture decorcem expose concerte

or brick concerte coating and wall textured paint

using base coat, tapping, durabond expose RCC

48 materials and finishing with decorsil two coat etc. 120 Sqm

complete. As per drawings and design supplied by

architect and instruction given by authority and

E.I.C. for all floor all height.

Providing cement vata (10cm. x 10 cm. size) quarter

49 round in cement mortar 1:1 including neat cement 589 Rmt 24.04

finishing, watering etc. complete.

Providing throating of plaster drip and moulding to

R.C.C. Chhajja.

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and fixing Chicken wire mesh jali 16 x

24 or approved size of 22 gauge at junction of

concrete and brick work / AAC Block work or

between different materials after making "V" grove

between two different material surface and filled

with rich cement mortar, nailing etc complete for all

floor, any height, all shape etc complete as

directed by engineer in charge.

Applying two coats of Birla or Asian acrylic lappy

(putty) and two coats of primer of approved brand

and manufacture on new wall surface to give an

even shade including thoroughly brushing the

surface free from mortar dropping and other foreign

matter and sand prepared smooth. (Putty shall have

low-VOC (Volatile Organic Compound) and Wall

painting (two coats) with plastic emulsion paint of

approved brand and manufacture on wall surfaces to

give an even shade including thoroughly brushing

the surface free from mortar droppings and other

foreign matter and sand papered smooth.

Applying two coats of putty & two coats of primer

of approved brand and manufacture on new wall

53 surface to give an even shade including thoroughly 5,061.00 Sqm 40.19

brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth.

Wall painting ( two coats ) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even shad

eincluding throughly brushing the surface free from

mortar droppings and other foreign matter and sand

papered smooth.

Providing and applying Texture Paint at approved

quality, colour scheme, including preparation of

55 surface, primer 2 coats + 2 coats of putty and texture 3,412.00 Sqm 525.55

paint, as per manufacturer’s specification,

scaffolding etc. complete as directed by EIC

Finishing wall with weather proof exterior emulsion

paint on wall surface (two coats) to give an required

56 shape even shade after thoroughly brushing the 3,898.00 Sqm 120.93

surface to remove all dirt, and remains of loose

powdered materials.etc complete

(E) Door & Window Work

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and fixing FRP FRAME size 100x 50 mm

& 28 mm thick FRP depress pannel shutter having

extra reinfocement on sides and edges in Gel coat

finish. The core of the shutter & frame is to be filled

up with injected fire retardant grade plyurethane

foam done in situ along with embedded wooden

pices for stiffening & also for taking hinges and

57 fixtures. The whole FRP frame and shutter is to be 97 Sqm 2354.22

water proof, weather proof, termite proof and

resistance to mild acid/alkalis Rates are to be

inclusive of S.S. hinges with necessary screws and

stainless steel fixtures and fastening with fastener &

sleeve. Product should have 3 years perfomance

guarantee & company have 9001-2000 certificate.

(For Toilet Purpose)

Providing and fixing flush door both sides laminated

and I.T.W. beading all around by using I.T.W.

frame 120 m.m. x 80m.m.. shutter fabricated from

35 mm thick solid core malemine faced three layered

pre laminated flat pressed wood based exterior grade

bonded BWP/BWR synthetic resin having stamped

58 IS 12823 grade I type II including three coats of 49 Sqm 5518

lacquer polishing to exposed wooden surfaces and

Stainless steel decorative type designs fixtures /

fastening 2Nos. Handles, 2Nos. Aldropes, towerbolt

etc.including I.T.W. triangular batten patti of size

30m.m.x30m.m.etc. as per architectural detailed

drawing and as directed by engineer in charge..

Providing and fixing 12 mm thick frameless

toughened glass door shutter of approved brand and

manufacture, including providing and fixing top &

bottom pivot & double acting hydraulic floor spring

type fixing arrangement and making necessary holes

etc. for fixing required door fittings, all complete as

per direction of Engineer-in-charge (Including

Necessary fittings).

Providing and fixing in position collapsible steel

shutters with vertical channels 20 x 10 x 2 mm

braced with flat iron diagonals 20 x 5 mm size with

60 top and bottom rails of T_rin 40x 40 x 6 mm with 15 Sqm 5729.85

38mm dia, steel pulleys complete with bolts, nuts,

locking arrangements, stoppers handles including

applying a priming coat of red lead paint.

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and fixing window having extruded

aluminum colour anodized section frame main outer

size 63.50 x 38.10x 1.95mm (of Jindal section no.

4605@ Wt. 1.094 Kg/Rmt), horizontal two track

member size 61.85mm x 31.75mm x 1.20mm (of

Jindal section no. 8687, @ Wt. 0.695 Kg/mt),

vertical member of size 61.85mm x31.75mm x

1.30mm (of Jindal section no. 8758 @ Wt.

61 Kg/mt) with sliding shutters of horizontal member 32 Sqm 1696.73

size 40mm x 18mm x 1.29mm (of Jindal Section No.

8949 @ Wt. of 0.456 Kg/mt), vertical member of

size 40mm x 18mm x 1.29 mm (of Jindal section no:

8947 @ Wt. of 0.456 kg / mt / section 8948, @ Wt.

0.457 kg/mt) with 5 mm thk tinted float glass with

powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as

per details etc completed for window.

Providing and fixing window having extruded

aluminum colour anodized section frame main outer

size 95mm x 24mm x 1.17mm (of Jindal section no.

2459@ Wt. 0.738 Kg/mt), horizontal three track

member size 92mm x 31.75mm x 1.30mm (of Jindal

section no. 8688, @ Wt. 1.07 Kg/mt), vertical

member of size 92mm 31.75mm x 1.50mm (of

Jindal section no. 8933 @ Wt. 1.06 Kg/mt) with

sliding shutters of horizontal member size 40mm x

18mm x 1.29mm (of Jindal Section No. 8947 @ Wt.

of 0.456 Kg/mt), vertical member of size 40mm x

18mm x 1.29 mm (of Jindal section no: 8949 @ Wt.

of 0.456 kg / mt) with 5 mm thick tinted float glass

with powder coated aluminum fittings and fixtures

and transparent silicon sealant glass fixing to frame

as per details including Stainless steel mosqito net

jali ,wire of I.S gauge designation 85-G with wire of

0.56 mm fix in aluminium door, window, ventilator

shutters of any size, any shape with etc all

Providing & fixing in position standard extruded

Aluminum section of size 63 x 38.10 x 1.2 mm (of

jindal section No.2434, @wt.0643 kg per mt or

equivalent) with colour anodized alluminium frame

for ventilation with 5mm thick rosted glass as details

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and fixing All door partly glazed & partly

pannelled door of approved colour Andised and

standard extruded alluminium frame 101.60 x

x 1.60mm @ 1.301 kg. with provided single door

shutters having bottom rail 114.30 x 44.45 x 1.35 @

1.19 Kg/ Rmt. Lock, Top & style 83.50 x 44.45 x

1.80 @ 1.50 kg ,Vartical rail 85.00 x 44.45 x

64 @ 1.301 Kg/Rmt and glazing clips 19.00 x 17.30 x 49 Sqm

0.90 @ 0.124 Kg/Rmt with 5mm thick float

glass,silicon gasket and 6mm Pre-lamineted board at

bottom as per drawings 1-nos of pivot/ Hinges 4 nos

125mm, D type 200, Alluminium handle 2 nos, lock

of Apprvoed Quality 1 nos, Towarbolt 150mm

Nos, Floor door stopper 1 Nos, including fixtures &

Fastening etc. Complete.

Sr. No. Item Description Total Quantity Unit Rate Amount

(F) Structural Steel Work

Providing and fixing M.S. grill of required pattern

for windows etc. with M.S.. flats at required spacing

and frame alround square or round headed bolts and

nuts or by screws.including applying a priming coat

of red lead paint and two coats of oil painting etc

complete (A)Plain grill

Chain Linked Fencing

2" Dia Vertical MS Pipes in 14 gz

1.5" Dia horizontal MS pipes in 14 gz

3 mm Thick 2"x2" GI Fence Net

Height of the Fence 10' with 2' grouting of the pipes,

Placement of vertical pipes with a distance of 10'

width, central support in horizontal pipes

Standard Green Colour

1 Nos Gates each having size 7'x 3' for Tennis court

Providing, supplying, fabricating and erecting in

position the structural steel for colums, grill, gates,

bars, truss, purlins, runners, cleats, insert plate, base

plate etc for all structural elements as per detail,

made up from closed structural steel hollow sections

(RHS/SHS including rolled section ) or angle or

chanel with weather resistant of Tata Structural /

sections or an approved equivalent as per details /

67 drawings/instructions including cutting, bending, 40,933.00 Kg 59.83

jointing, connecting, welding and / bolting and /

riveting and fabricating and erecting in position etc

complete for all levels as directed. The rate to

include all necessary fixtures, fastening including

welding rods of standard approvded quality etc for

complete the job. The rate shall also include the two

coats of synthetic enamel paint with priming coat &

necessary scaffolding etc. complete as directed

(G) Flooring Work

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing & fixing Granite for Door Jamb, Sill and

the like similar location of 18mm thick, from

to 2105mm in length and width 150mm /250mm in

cement mortar 1:2 [1 white cement : 2 marble dust]

with an admixture of pigment to match the marble

shade including fixing with copper pin 7.5cm long

of 6mm diameters in cement mortar 1:2 (1 cement :

2 fine sand) including making rebate for door shutter

in Granite, edege polishing and moulding etc.

completed as directed by EIC / Consultant.(Clear

measurement will be taken on sqmt basis for both

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and laying 18 mm thick Granite stone in

single piece (min. size 1500 mm) for staircase

flooring landing, risers & treads, skirting over

mm. (average thick base of cement mortar 1:3 (1

69 cement : 3 coarse sand ) and laid over and jointed 83 Sqm

with grey cement slurry including rubbing and

polishing etc. complete. including making edge

rounded including making rough finish at edge &

groove etc. complete.

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing & laying Kota stone slab flooring over

mm (average) base of cement mortar 1:6 (1 cement :

70 6 coarse sand) or L.M. 1:1.5 laid over and jointed 549 Sqm 1009.3

with gray cement slurry including rubbing &

polishing . complete. (A) 25 mm thick

Providing. & laying kota stone slab 25 mm th. in

risers of steps, treads dado and pillars edge laid on

71 10 mm th. Cement mortar 1:3 (1 cement : 3 coarse 19 Sqm 1193.66

sand)and jointed with rubbing & polishing etc.

P&L 24"x24" vitrified 8mm thick tile flooring over

20mm (average) base of cement mortar1:6 (1cement

:6 coarse sand) on new surface or fixing on existing

72 flooring by adhesive material including dismentaling 128 Sqm 1458.33

of existing flooring and jointed with color cement

slurry including finised with flush pointing &

cleaning the surface etc. complete for antiskit

Providing and laying Bare Foot flooring tiles over

mm. average thick base of cement mortar 1:6 (1

73 cement : 6 coarse sand) and laid over and jointed 330 Sqm 2616.77

with grey cement slurry including rubbing and

polishing complete. 18 mm Thick Bare Foot Tiles

Providing and laying white glazed tiles 6mm thick in

flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-cement : 3-coarse

sand) finishing with flush pointing in white cement.

Providing and laying white glazed tiles 6mm thick in

skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1-cement : 3-coarse sand) and

jointed with white cement slurry.

P & L 24" x 24" vitrified 8 mm thick tile flooring

over 20 mm (average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with

color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for

P & L 24" x 24" vitrified 8 mm thick tile flooring

over 20 mm (average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with

color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for

Providing and laying Vitrified tiles 8 to 10 mm thick

, 24'' x 24'' in skrting risers of steps and dedo on

78 10mm thick cement plaster 1:3 (1-cement : 3-coarse 21 Sqm 1183.19

sand) and jointed with white cement slurry light

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and fixing 18 mm.thick of approved

quality of Granite urinal partition in single piece of

size 0.62 x 1.20 mt. in cement mortar 1:1 (1 cement :

1 coarse sand) and finishing with white cement

including polishing on bothsides,finishing edges

with round shape of marble etc. complete.

Providing and laying broken chine mosaic flooring

for terrace using 12 mm to 20 mm broken pieces of

glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar

creme out upto surface using white cement including

rounding off junctions and extending them upto

cm along the wall,clearing with water and oxalic

acid etc. as directed by EIC and as per

Architect/Engineer-in- charge (Only plan area

should be measured )

Providing and fixing Granite sandwhich type

platform including supplying and fixing granite

stone 18 mm thick mirror polished 1st quality

Granite stones in top and side position and vertical

strip at front over 25 mm thick polished kotah stone

platform fixing in top and sides and itermediates

supports fixing with cement mortar and adhesivee

and finishing at required position etc complete.

Providing and fixing machine cut, mirror/ eggshell

polished , Marble stone work for wall lining (veneer

work) including dado, skirting, risers of steps etc., in

required design and pattern wherever required,

stones of different finished surface texture, on

mm (average) thick cement mortar 1:3 (1 cement :

coarse sand) laid and jointed with white cement

slurry @ 3.3 kg/sqm including pointing with white

cement slurry admixed with pigment of matching

shade, including rubbing, curing, polishing etc. all

complete as per Architectural drawings, and as

directed by the Engineer-in-Charge.

18 mm thick Italian Marble stone slab, Perlato,

Rosso verona, Fire Red or Dark Emperadore etc.

Providing and laying cement concrete flooring 1:2:4

(1-cement : 2-coarse sand : 4-graded stone aggregate

20mm nominal size) laid in one layer and finished

with a floating coat of neat cement. (B) 50mm thick.

Providing and laying chemical coating masterseal

550 El (BASF or equivalent) in existing swimming

84 pool area with clening surface with brush or other 390 Sqm 631.01

material as instruction, approved by architect

engineer in charge.

244 x 119 x 9 mm FINA approved vitrified tile in

85 white or sky blue colour and lane marking as per 375 Sqm 1,950.00

FINA in dark blue or black_For Swimming Pool

Sr. No. Item Description Total Quantity Unit Rate Amount

Fixing Specialized Tiles: Tile size 244 x 119mm x

9mm thickness (6mm spacer between tiles) of Orient

Blue / New Blue / Dark Blue Shade complete as per

suggested by Architect. Following is the Laying

procedure of tile in Olympic Size Swimming Pool :

1) Laying of tiles by keeping spacers between two

tiles with L111 Crete Filler Powder + L73 Crete

Admix. Company suggest L111 + L73 for vitrified

body tile. 2) After laying of tiles, will do pre-

grouting with white cement and then epoxy grouting

with SP100 latapoxy. 3) After epoxy grouting, will

clean swimming pool with mild acid. So total

thickness after plaster with tile will be 13mm.

For Swimming Pool

244 x 119 FINA approved Hand Grip tile on the top

87 wall between pool & overflow channel - For 200 Nos. 750

244 x 119 FINA approved anti skid tile on the top

88 wall between pool & overflow channel - For 200 Nos. 750

Fixing hand grip and anti skid tiles : Tile size 244 x

119mm (6mm spacer between tiles) Following is the

Laying procedure of tile : 1) Laying of tiles by

keeping spacers between two tiles with L111 Crete

Filler Powder + L73 Crete Admix. Company suggest

L111+L73 for vitrified body tile. 2) After laying of

tiles, will do pre-grouting with white cement and

then epoxy grouting with SP100 latapoxy. 3) After

epoxy grouting, will clean swimming pool with mild

acid. - For Swimming Pool

Sr. No. Item Description Total Quantity Unit Rate Amount

Supply and Installation of

European/Australian/American Origin

Heterogeneous Sports Vinyl Flooring thickness of

8m or 9 mm The Product shall be Floor Score,

FIBA, BWF & FIVB Certified, its BWF

Certification shall be of Grade-1 (BWF International

Elite). The Technical Standards of Product shabe as

per following and product should have been Solvent

and heavy metal free. Surface Finish : resistant

surface, Backing: Combined closed cell foam,

Weight: 4.25 kg/m2 asper EN ISO 23997 Standards,

Roll Size: 1.5 - 2 Meter Width x15 Meter Length ±

1%, Product Specification should fall under EN

14904 (category P2), Impact sound insulation:

dB as per EN ISO 717-2 Standards, Thermal

resistance: 0.08m2-K/W, Reaction to fire: C-fls1,

Formaldehyde emission: Nformaldehyde,

Pentachlorophenol: No pentachlorophenol,Friction:

80-110 as per EN 13036-4 Standards, Shock

absorption: 40% EN-14808 (P2 category product),

Vertical deformation: 1.90mm EN 14809, Ball

rebound: 98% as per E12235, Specular gloss: <

as per EN 2813, Dimensional stability: ± 0.2% EN

Sr. No. Item Description Total Quantity Unit Rate Amount

(H) Miscellaneous Work

Providing & Fixing AUTOGLOW Signages in

91 Block / Small Letters of Specified Sizes Fire lift 53 Each 298.93

Providing and fixing beveled edge mirror of superior

glass (of approved quality) complete with 6 mm

thick hard board ground fixed to wooden cleats with

C.P. brass screws and washers complete.

Providing, laying and fixing 200 mm wide PVC

water stop of approved make and grade thickness in

concrete work for water tight structures like

retaining walls of pound water body and

underground water tank including cleaning and

placing in line level etc. complete, as directed.

Supply & INSTALLATION OF COMMERCIAL

GRADE, SELF-LEVELLING COMPOUND (CL

11) with the thickness of

5mm. CL 11 shall confirm to: Bulk density of

powder: Approx. 1.3k+C1g / litre; Weight of fresh

mortar: Approx.

2.0kg / litre; Working time: Approx. 25 minutes; Pot

life:Approx. 15 minutes; Initial Set (Vicat): Approx.

40 minutes; Final Set (Vicat): Approx. 1 hour; Ball

Impact Hardness: After 1day 6.5 mm; Scratch

Hardness: After 1 day 1.6 mm; Compressive

Strength: After 28 days min: 20 N/Sqmm; Flexural

Strength after 7days: 3.5 N/Sqmm; VOC Content:

7.1 g/L. Primer: For porous / absorbent surfaces:

Apply first coat of primer using P 51 (single

component, water based emulsion primer) by

diluting in water at ratio of 1:3 and allowed to dry

completely. Apply the primer uniformly on the

substrate using brush / roller / broom. In order to

compensate the porosity of the substrate, apply a

second coat of P 51 by diluting in water at ratio of

1:1 and allow it to dry completely. P 51 shall

confirm to: Recoat time: 4 hours; Full Cure:

hours; Bond strength:>1.5 N/mm; OC: Content:

g/L. For dense / non‐absorbent surfaces: Two

components of P 82 (2 parts, water based epoxy

primer and bonding agent) shall be poured in

suitable sized mixing essel and mixed thoroughly to

obtain homogeneous mix by using heavy duty slow

speed drilling machine attached with mixing paddle.

The mix shall be applied in thin even coat at

coverage of 5 to 10 Sqm per litre on the substrate

using a foam or short pile paint roller, paint brush,

out where temperature is less than 10 Deg C or

ambient relative humidity is greater than 85%.

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing smooth surface on R.C.C. slab / P.C.C.

slab with (Trimix flooring machine), for the purpose

of providing smooth level surface for Synthetic

flooring Layer above, including all power supply,

necessary equipment, as per directed by Engineer

incharge, etc. comp.

Carring out plinth treatment to post construction /

existing structure by spraying chemical solution for

termite control treatment including labour and

material consistment with I.S.I specification. Using

Chlordene and Chiorpurfiles 20 EC. As Per

96 6131_paret-II Consentration Weight one percent is 1,500.00 Sqm 36.57

recommended i.e one litre 20 EC chemical emulsion

with 19 liter give 1 % concrentration inclusive of

one litre chemical emulsion appication at the rate of

5 Litre chemical / Sqm of surface is recommended

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and laying plinth protection to existing

building including excavation in oridnary soil and

laying Brick Masoanry on edge with cement

concrete (0.10 mt thk)1 : 5: 10 using Stone

aggregates of 20 mm nominal size in foundation

Layer and above on PCC providing Cement Cocrete

1:2:4 (0.10 mt thk)(1 Cement : 2 Coarse Sand :

Stone Aggregrate 20 mm nominal size) coping on

top including ramming finishing (wiht Square

line(0.20 X 0.20) marking on Top and Side )and

curing etc complete as per drawing and as directed

by architect engineer incharge.

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and laying integral cement based

treatment for water proofing on horizontal surface at

all depth below ground level for under ground

structures as directed by Engineer-in-Charge and

consisting of :

(i) Ist layer of 22 mm to 25 mm thick approved and

specified rough stone slab over a 25 mm thick base

of cement mortar 1:3 (1 cement : 3 coarse sand)

mixed with water proofing compound conforming to

IS:2645 in the recommended proportion over the

leveling course (leveling course to be paid

separately). Joints sealed and grouted with cement

slurry mixed with water proofing compound.

(ii) 2nd layer of 25 mm thick cement mortar 1:3 (1

cement: 3 coarse sand) mixed with water proofing

compound in recommended proportions.

(iii) Finishing top with stone aggregate of 10 mm to

12 mm nominal size spreading @ 8 cudm/sqm

thoroughly embedded in the 2nd layer.

Using rough kota stone. (Horizontal)

Providing and laying integral cement based

treatment for water proofing on the vertical surface

by fixing specified stone slab 22 mm to 25 mm thick

with cement slurry mixed with water proofing

compound conforming to IS:2645 in recommended

proportions with a gap of 20 mm (minimum)

between stone slabs and the receiving surfaces and

99 filling the gaps with neat cement slurry mixed with 142 Sqm

water proofing compound and finishing the exterior

of stone slab with cement mortar 1:3 (1 cement :

coarse sand) 20 mm thick with neat cement punning

mixed with water proofing compound in

recommended proportion complete at all levels and

as directed by Engineer-in-charge :

Using rough Kota stone. (Vertical)

Terrace Waterproofing / Wet Area

Sr. No. Item Description Total Quantity Unit Rate Amount

Supply and application of Mapelastic Smart two-

component, high flexible, elastic cementitious

mortar made from cementitious binders, fine-grained

selected aggregates, special admixtures and synthetic

polymers in water dispersion with an elongation of

120% (DIN 53504), Static crack bridging ability of

>2.8 mm (EN 1062-7), Permeability to water vapour

Impermeability to water < 0.05kg/m²·h0.5 (EN

1062-3), Permeability to CO₂ sDCO2 >50m (EN

1062-6), Reaction to fire (Euroclass): E (EN 13501-

1), adhesion to concrete after 28 days: 1.3N/mm²

(EN 1542) when applied @ 2mm thickness (in

coats) min consuption should be 3.2 kg/sqm on the

surface prepared for waterproofing to be carried out

to ensure the mechanical properties of the product.

The application of the product shall be carried out

after the thorough preparation of the surface which

includes cleaning, crack treatment, corner joint

treatment, grouting. Addionally apply fiber net for

reinforcing the waterproofing membrane and with

Mapenet 150 tensile strength should be complied

minimum 3.2 MPa after curing.

1. Tensile Strength : 3.2 Mpa

2. Crack Bridging: 2.8 mmPrimer 3296/Mapelastic

Terrace Waterproofing / Wet Area

Corner Tape: Supply and application of Mapei's

Mapeband on the corner with applying mapelastic

smart on the sides of the tape

Tensile strength (according to EN 12311-2, Method

B): > 2 N/mm² Ultimate elongation (according to

EN 12311-2, Method B): ≥ 300% Tear resistance

(according to EN 12310-2): ≥ 100 N Temperature

when in use: from -20°C to +60°C Alkali resistance

(according to EN 1847 and EN ISO 527-3):

variation ≤ ± 20% Vapour diffusion strength

coefcient: appox. 30,000 µ (± 30%) Thickness (EN

Gutter Waterproofing

Sr. No. Item Description Total Quantity Unit Rate Amount

Supply and application of Mapelastic Smart two-

component, high flexible, elastic cementitious

mortar made from cementitious binders, fine-grained

selected aggregates, special admixtures and synthetic

polymers in water dispersion with an elongation of

120% (DIN 53504), Static crack bridging ability of

>2.8 mm (EN 1062-7), Permeability to water vapour

Impermeability to water < 0.05kg/m²·h0.5 (EN

102 1062-3), Permeability to CO₂ sDCO2 >50m (EN 56 Sqm

1062-6), Reaction to fire (Euroclass): E (EN 13501-

1), adhesion to concrete after 28 days: 1.3N/mm²

(EN 1542) when applied @ 2mm thickness (in

coats) min consuption should be 3.2 kg/sqm on the

surface prepared for waterproofing to be carried out

to ensure the mechanical properties of the product.

The application of the product shall be carried out

after the thorough preparation of the surface which

includes cleaning, crack treatment, corner joint

treatment, grouting. Primer 3296/Mapelastic Smart

Gutter Waterproofing

Corner Tape: Supply and application of Mapei's

Mapeband H120 on the corner with applying

mapelastic smart on the sides of the tape

Tensile strength (according to EN 12311-2, Method

B): > 2 N/mm² Ultimate elongation (according to

103 EN 12311-2, Method B): ≥ 300% Tear resistance 313 Rmt

(according to EN 12310-2): ≥ 100 N Temperature

when in use: from -20°C to +60°C Alkali resistance

(according to EN 1847 and EN ISO 527-3):

variation ≤ ± 20% Vapour diffusion strength

coefcient: appox. 30,000 µ (± 30%) Thickness (EN

1849-2): 0.58 mm; Mapelastic Smart

UG Tank Waterproofing

Supply and application of Mapei's two-component

epoxy paint made from epoxy resins and special

pigments with high covering capacity (such as

Mapecoat DW 25 produced by MAPEI S.p.A.) for

anti-acid and non-toxic coatings on concrete

surfaces. After application of Primer SN/ Tiblock P

with sandwiched Mapenet 150 apply two coats of

the Mapecoat DW25 on a solid, clean substrate

treated with primer (not included) with a brush,

roller or by airless spray. Wait between 6 and

104 hours between each coat, according to surrounding 143 Sqm 1,204.00

conditions. The product must comply with the

principles defined in EN 1504-2/-9 and have the

following characteristics like, Abrasion

resistance:(EN ISO 5470-1) <600 mg, Permeability

to CO₂: (EN 1062-6) > 900 m, Permeability to water

vapour: (EN ISO 7783-1-

Sr. No. Item Description Total Quantity Unit Rate Amount

2) Class III, Resistance to thermal shock (1x): (EN

13687-5) 3.5 MPa, Taber abrasion resistance (g):

0.1; viscosity - rotor 5. Consumption - 0.6 -

1kg/sqm. Primer SN or Triblock P/ Mapenet 150/

Supply of HDP (High Density PVC) Locker made

105 out of 12mm & 18mm thick board, size 6 Sqm 32,482.90

300wX450htX400 dt mm with 18mm thick door.

Providing and fixing cast iron steps of size 500 mm

106 x 150 mm x 22.5 mm and painting with two coat, 24 Each 205.6

coats of anticorrosive paint etc. complete.

Providing and Fixing C.I. Cover with Frame:

Supplying and fixing, water level controller for the

108 over head tanks of approved make complete, as 10 Each 5011.61

Providing and fixing pre-cast concrete kerb stone of

gray cement based concrete block 30cm length,30cm

height and 15cm thick of M250 grade concret as per

approved design and including excavation for fixing

in proper line and level, filling the joint with C:M

1:3 (1cement:3fine sand) etc complete.

Providing and fixing pre-cast Rubber Dye / steel

Dye inter locking concrete block 60mm thick with

grade of concrete M300 pnumatic compressed /

vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm

Sand layer for levelling and filling the joint with

sand in proper line and level as per guidlines of IRC

: SP 63-2018 etc. Complete.

Making holes upto any RCC members by diamond

Core Cutting machine of HILTI or equivalent

including disposing the debries.

Making holes upto any RCC members by diamond

Core Cutting machine of HILTI or equivalent

including disposing the debries.

Making holes upto any RCC members by diamond

Core Cutting machine of HILTI or equivalent

including disposing the debries.

Drilling hole of required diameter and depth as

directed for fixing of rebars,using hammer drill,

cleaning the hole using mechanical air flower, water

etc,providing and fixing rebar in the drilled hole

using Fischer - FIS 360 or Equivalent approved

make Cementetious chemical grout and sealant with

necessary scaffolding, staging, labour, tools and

equipment etc. complete as directed by Engineer-in-

Sr. No. Item Description Total Quantity Unit Rate Amount

(A) 8 mm. dia.bar -Holes 12mm dia Depth 100mm

115 (B) 10 mm. dia.bar -Holes 14mm dia Depth 100mm 184 Each 158

116 (C) 12 mm. dia.bar -Holes 16mm dia Depth 120mm 214 Each 196

117 (D) 16 mm. dia.bar -Holes 20mm dia Depth 175mm 184 Each 446

118 (E) 20 mm. dia.bar -Holes 24mm dia Depth 200mm 184 Each 805

119 (F) 25 mm. dia.bar -Holes 30mm dia Depth 250mm 184 Each 1150

Providing and laying machine cut free edges

machine double polished Kota stone for shelves in

cupboard and walls in single piece (Miximum

mt.) 25 mm including cutting grooves in walls and

fixing the stone with neat cement slurry in true line

and level as directed etc. complete. for Shelves

Fabricating, supplying and fixing in position SS

railing for staircase and balcony with brush finish

and 304 grade as per Indian Standrd and detailed

121 drawing including grinding, cleaning and filling the 79 Rmt 2,425.00

welded spots with SS finish (Only Length will be

paid for payment heigth max.1.0 mt.). The Work to

be executed as per consultant drawing.

Fabricating, supplying and fixing in position SS

daso for staircase and balcony with brush finish and

304 grade as per Indian Standrd and detailed

122 drawing including grinding, cleaning and filling the 56 Rmt 1,365.00

welded spots with SS finish (Only Length will be

paid for payment ). The Work to be executed as per

consultant drawing.

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and Fixing HDPE moulded seating

constructed from round ERW tubes of 25 mm and

19 mm diameter with 1.2 mm thickness, square

ERW tubes of 50 x 50 x 2 mm, 1.5 mm thick

perforated sheets, and plastic chairs. The structure is

finished with a semi-gloss powder coating and is

123 supplied in a knock-down condition. All parts are 98 Nos.

free from burrs and sharp edges, with overall

dimensions of 5900 mm in length, 2450 mm in

depth, and 2150 mm in height with required

necessary accessories etc, complete as per drawings

and design supplied by architect and instruction

given by authority and E.I.C.

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and fixing Sports Murals OF SIZE 2 MT

X 2 MT OR as per drawing, made of 4mm ACP

mounted on Galvanium Sheet, Aluminium

Composite Panel (ACP) shall be 4mm thick in

required colors for exteriors consisting of two layers

of aluminium skins of 0.50mm thick sandwiching a

thermo plastic core in continuous lamination process

with PVDF coating for exterior grades ensuring long

colour and no fungal attacks. Base frame work with

124 aluminium sections of 65mm X 25mm shall be fixed 225 Sqm 7789.8

over the brick work and the above aluminium panels

shall be fixed to the frame work as cladding with

material:- silicone dow corring 789 weather silicone

in 995 dow corring. It includes cost of labour,all

CNC CUT WORK, materials, all accessories,

adhesives, scaffolding, wastages, transport, taxes,

fixing into a neat finish in aesthetic point of view,

without any undulations in facias all complete as per

drawing and Instruction of Engineer in-charge.

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and fixing Signages made from S S

in 1 mm thick SS plate with eateching as per

design and filling the black or any color as per

125 requirnmnet of architects with any size with fitting 13,230.00 Sq.inch

and Including all accessories, material & labor

complete as directed by Architect / Engineer – in –

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and fixing LED BACKLIT SINAGE

BOARD on Main Entry of Name Text (SPORTS

AUTHORITY OF GUJARAT) in 125 mm ht

LETTERS and Size with SAG Logo on BOTH

SIDES or as per drawing provided by the architect

and Name Text in 600 mm ht letters

(MULTIPURPOSE HALL - NAVSARI) or as per

drawings with 10 mm clear Acrylic cut work and

fixing 3mm acrylic on top of brand Ptglass,astari

etc,with all laser and cnc work,including all

material, LED MODULES of brand osram or

equivalent,labour,100 mm ss studs for mounting and

other hardwares, scaffoldings,all ms fabrification

work,waste of materials etc and complete the work

satisfactorily as per instruction of architect or

Engineer-in charge.

Sr. No. Item Description Total Quantity Unit Rate Amount

Supply of double skin PUF insulated sandwich Roof

Panel having 100 mm core with 0.50 & 0.50 mm

TCT PPGI trapezoidal in Top & micro ribbed liner

panel in bottom skin. The PUR panel shall be CFC

free and Zero Ozone depleting panel using N

Pentane blowing agent & made out of continuous

line running on uninterrupted power supply. Panel

shall have pre coated GI sheet on both side of

Polyurethane Foam confirming to IS 12436:1988.

The pre coated sheet shall be of minimum 240 MPa

steel grade confirming to IS 14246:1995 and shall

have zinc coating of minimum 80 GSM in top sheet

and 80 gsm in bottom as per IS: 277: 1992. The

PPGI sheet shall have plastic protective guard film

of minimum 25 microns to avoid scratches during

transportation. The panels shall be vertically joined

together by Tounge and Groove joints. The PUR

Foam shall be self-extinguishing, fire retardant type

having minimum density of 38 to 42Kg/Cu.mt (+, -2

Profile Width - 1060mm

Gypsum False Ceiling

Providing and fixing single layer water proof

gypsum board 12.5 mm thick sections using water

proof board of size 1220 mm x 1830 mm x 8.0 mm

suspended by GI suspender channel of size 25 mm x

3 mm with intermediate channel og size 18 mm x

mm x 0.8 mm at 1220 mm center to center ceiling

128 section of size 40 mm x 35 mm x 0.55 mm at 457 30 Sqm 600.94

mm c/c and perimeter channel A of size 20 mm x

mm x 30 mm x 0.5 mm at edges & drops incl.paper

tap sand sofit cleat, anchor fastener, scoch bolt

connecting cleat,joining compound top coat on

ceiling incl.making necy.opening for light

fitting,diffuser etc. comp. as per detail drawing as

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and fixing eco-friendly light weight

calcium silicate false ceiling tiles having Tegular

edge & 15 mm Thick Densified edges on the Tile

Periphery for Extra Strength The Light weight

calcium silicate ceiling tiles shall have , light

reflection 85% non combustible as per B.S. 476 part

IV, 100% humidity resistance and also having

thermal conductivity0.043° w/m KC.for the best

thermal Insulation . The Light weight calcium

Silicate tile shall be of approved texture Fine

fissured / Spintone/Cosmos having NRC value of

0.5 & Globe having NRC value of 0.75 NRC or

equivalent of size 595 X 595 mm to be laid on true

129 horizontal level suspended inter locking metal grid 119 Sqm 1,657.57

of hot dipped galvanized steel sections (galvanizing

@120 grams per sqm including both side) consisting

of main ‘T’ runner suitably spaced at joints to get

required length and size of 24X38mm made from

0.30 mm thick (minimum) sheet, 1200mm centre to

centre, and cross ‘T’ of size 24X28mm made out of

0.33mm (Minimum) sheet spaced 1200mm along

spaced between main ‘T’ at 600mm centre to centre

to form agrid of 1200X600mm and secondary cross

’T’ of length 600mm and size 24x28mm made of

0.30 mm thick (Minimum) sheet to be interlocked at

middle of the 1200X600mm panel to form grid of

Providing restingtiled

and fixing on periphery

false ceiling of size

(600x600)mm in true horizontal level suspended on

inter locking Gyproc Matrix metal grid of hot dipped

galvanized steel sections. It consists of main "T"

runner of size 24x32x0.3x3600mm, cross "T" of size

24x25x0.3x1200mm, secondary cross "T" of size

24x25x0.3x600mm and PPGI wall angle of size

24x24x0.4x3000mm. Bottom exposed capping of

width 24 mm of all Tsections shall be of 0.25mm

thick PPGI. PPGI wall angle 24x24x0.4x3000mm

materialGI(IS513),YS-280Mpa,Finish-Galvanised

90GSM(IS277)} is fixed along the perimeter of the

ceiling to Walls, partitions or columns etc., with

wooden screws at 300mm centers or Hilti HPS

x40mm placed at 600 mm c/c. Gyproc soffit cleat

27x37x25x1.6mm {GI(IS513)YS-260Mpa,Finish-

Galvanised 120GSM(IS277) } is fixed with Gyproc

Rawl Plug- 8x45mm {Material-IS 513 CR2 grade,

Zinc coating (7 to 8 microns) pull out load- 6.8kN

for M30 concrete grade} creating 1200mm x

1200mm grid. Main-T runners 24x32x0.3x3600mm

{GI(IS513)YS-280Mpa,Finish- alvanised

120GSM(IS277) are then suspended at 1200mm c/c.

from ceiling using 4mm zinc electroplated butterfly

level clips of size 85x30x0.8mm spaced at maximum

1200mm center to center along main T and not more

than 150mm from spliced joints. The last hanger at

is placed in the grid.

Sr. No. Item Description Total Quantity Unit Rate Amount

Aluminium Composite panelling to drop-fin and

front column, etc: Supply & fixing of FR GRADE

Aluminium Composite Panel (ACP), 4 mm thick in

required colours for interiors/exteriors consisting of

two layers of aluminium skins of 0.5 mm thick

sandwiching a thermo plastic core in continuous

lamination process with PVDF coating for

interior/exterior grades ensuring long colour and no

fungal attacks. Base frame work with aluminium

131 sections of 65mm X 25mm shall be fixed over the 248 Sqm

brick work and the above aluminium panels shall be

fixed to the frame work as cladding with material:-

silicone dowcorring 789weather silicone in 995 dow

corring.It includes cost of labour,M.S

FABRICATIONS, materials, accessories, adhesives,

scaffolding, wastages, transport, taxes, fixing into a

neat finish in aesthetic point of view, without any

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and applying GP2 grouting non-shrink

grout for grouting of base plates of columns by

132 adding GP2 grouting powder 6.06Kg/ liter of clean 35 Kg 29.45

water for achieve pourable consistency etc.,

complete as directed by Engineer in-charge.

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and fixing Semi unitized vision panel with

glazed units of size as per design and consisting of

6 mm thick (toughened)glass approved by the

architect. with mullion (101mmx57mmx1.8mm,

kg/12 rft), transum (63mmx57mmx1.8mm,

kg/12 rft), sub frame (54mmx22mmx1.25mm,

2.4kg/12 rft), with anodizing,with m.s. hot deep

galvanized bracket,with s.s. hardware The glazed

panel to be formed by means of imported special

structural quality silicon adhesive sealant layer

manufactured by M/s. Dow Corning 995 USA with

material:- silicone dowcorring 789weather silicone

in 995 dow corring.It includes cost of labour,

materials, accessories, adhesives,all required M.S

FABRICATIONS, scaffolding, wastages, transport,

taxes, fixing into a neat finish in aesthetic point of

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and laying compacted W.B.M. 150,mm

compacted thick of machine crushed B.T.,Metal of

size 45 MM to 63 MM with using 20%, stone

screenings (Grit ) and stone dust as ,filler including

spreading , watering and ,consolidation by vibratory

roller etc. complete.

Providing ,laying, spreading, and compacting

,graded stone aggregates to wet mix Macadam,150

mm compacted thick as per MORT & H

,Specification including premixing the ,material with

water at OMC in mechanical ,mix plant, carriage of

mixed material by ,tippers to site, laying in uniform

layers with,paver in sub base/base course on well

,vibratory roller to achieve the desired, density.

Providing and applying primer coat with bitumen

80/100 on prepared surface of granular base

136 including clearing of road surface and spraying 1,218.00 Sqm 40

primer at the rate of 0.75 kg /sqm using mechanical

Providing and laying 50 mm thick compacted B.M.

with B.T. aggregate as per MORT&H gradation and

specification with asphalt 80/100 for tack coat at

the rate of 2.50 kg per 10.0 sqm. With mechanical

sprayer and bitumen grade 80/100 for mixing at the

rate of 40 kg/MT by weight of total mix i.e.(4% by

weight of total mix) including heating the asphalt

137 and aggregates by continous batching drum mix 137 Rmt 3442

plant and spreading the same by paver finisher

including rolling and consolidation with vibretory

roller and power roller and providing all materials,

equipments, tools and plants, fire wood, oil:,

kerosene, labour charges etc. and using contractor's

own machineries drum mix plant and paver finisher

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and supplying evenly priming / tack coat

with bitumen @ rate of 10 Kg/ Sq.M. (including

heating the bitumen but excluding the cost of

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and laying 40 mm thick bitunenous

concrete (BC) using B.T. stone chipping and

aggregate as per Morth&H gradation and asphalt for

tack coat @ 2.5 kg kg/10 smt on B.T. surfaces and

butumine grade 80/100 for mixing @ 60 kg / M.T.

by weight of total mix i.e. (6.0 % by weight of total

mix) including heating and asphalt and aggregates

by continuous batching batch mix plant and

spreading the same by paver finisher including

rolling and consolidation with 10-12 tonnes

vibretory and power roller including flushing sand

@ of 0.03 cumt/10smt and providing all materials,

equipment, tolls and plants, fire wood, oil:,

kerosene, labour charges etc. and using contractor's

own machineries drum mix plant and paver finisher

Sr. No. Item Description Total Quantity Unit Rate Amount

P&L Synthetic Surface ITF Approved -8 layer full

cushion Synthetic surface which consists of 1 layer

of level master 2 layers of thick rubber cushion

layers of dense rubber cushion and 2 layers of color

with line marking according to the international

Providing Tennis post net - HD Canvas/Tetron tape

machine knitted 3mm

142 Providing Tennis net wire 2 Nos. 745.49

143 Providing Tennis referee chair foldable 2 Nos. 11948.16

Providing Tennis Score board Manual score board

portable and movable, all construction steel

Providing and fixing Wood plastic composites

(WPC) fluted wall cladding of required size

including approved shade in approved pattern as

145 directed by the architect. Rates shall be inclusive of 100 Sqm 3277.5

all hardware fittings and fixtures as required to fix

the same on the wall and ceilings including corner

beading and fastners.

Sr. No. Item Description Total Quantity Unit Rate Amount

Supply and installation exteranal cladding using

Shera fibre cement plank of cassia / straight grain

/teak coloured texture (exterior grade)with 8mm

thickness and dimension of 150mm x 3000 mm.fibre

cement board should be of minimum

density1300kg/m3 (+/- 50) and comply to ASTM c

1185 and iso 8336 part (E)for confirming durability

propertiesand BS 476 prt 5,6,7.thermal conductivity

146 should be mini 0.15 w/m” k and PH value of 7-8, 351 Sqm

depending on height of structureboard to be fixed

using M.S. structural steel section of suitabe with

mini spacing 450mm to 600 mm or as per direction

of engi incharge.plank to be fixe dusing screws of

tensile strength 34N and shear strength 68N on

framing maintaining distance of minimum 25mm

between two planks.all plank to plank joints to be

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and laying of Hot applied thermoplastic

compound 2.5 mm thick including reflectorizing

glass beads and 250 gms per Sq.m. area thickness of

2.5 mm is exclusive of surface applied glass beads

as per IRC-35 2015. The finished surface to be

level/uniform and free from streaks and holes or

chipping of Thermoplastic if any and including

primer coat for C.C. surface and A.C.C. surface, in

white and/or yellow colour. Rate includes brushing,

147 blooming and cleaning and application of paint. 124 Sqm

Zebra patta/Bump patta/Lane line/Center line/Cut

patta, Directional Arrow, Lettering MoRT&H

Clauses 803 &Volume II Part III and IRC 35-

2015.Rate shall include brushing, brooming,

painting and repainting of worn out paint after a

period of 2.5 years.

Note:-As per drawings and design supplied by

architect and instruction given by authority and

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and Fixing ABS Plastic SPEED BUMP of

Size :- 750 MM x 250MM x75 MM, Per Mtr #

Nos (2 black, 2 yellow),TOP DESIGN – LINE

148 DESIGN ANTI SKID PATTERN FOR GRIP 114 Rmt

fililing CEMENT INSIDE etc. complete As per

drawings and design supplied by architect and

instruction given by authority and E.I.C.

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing erecting and fixing double coated ISI

water tank of required capacity each with all

necessary fittings and connection etc. complete on

Sr. No. Item Description Total Quantity Unit Rate Amount

Constructing RCC Overhead water tank with

Providing and laying controlled cement concrete

M250 mix for R.C.C. work including reinforcement,

boxing, centering, vibrating, , PVC water stopper,

curing and mixed with approved water proofing

cement compound or "CEMWET" or "PIDICRETE

LW" integral water proofing admixture as water

proofing agent to be mixed with 50 kgs. bags shall

be as recommended by the manufacture of the water

proofing material, concrete work for top, bottom

150 slab & side pardi for Overhead water tank item incl. 40,000.00 Litre

20 mm thk. water proofing cement plaster in C.M.

1:3 with smooth finishing & Glazes tile Dedo, vata,

watering etc. Comp. to all face of tank . including

locking arrangement outlet, inlet, overflow and

washout outlet pipe arrangement as necessary & C.I.

Cover 0.60 x 0.45 weight not less then 35 kg with

locking arrangement. etc. comp as per structural

Sr. No. Item Description Total Quantity Unit Rate Amount

Sr. No. Item Description Total Quantity Unit Rate Amount

Constructing RCC Under Ground water tank with

Providing and laying controlled cement concrete

M250 mix for R.C.C. work including reinforcement,

boxing, centering, vibrating, , PVC water stopper,

curing and mixed with approved water proofing

cement compound or "CEMWET" or "PIDICRETE

LW" integral water proofing admixture as water

proofing agent to be mixed with 50 kgs. bags shall

be as recommended by the manufacture of the water

proofing material, concrete work for top, bottom

slab & side pardi for underground water tank item

151 incl. Necessary excavation & refilling the available 3,00,000.00 Litre

earth, 15 cm thk 1:2:4 for bedding of concrete,

mm thk. water proofing cement plaster in C.M. 1:3

with smooth finishing & Glazes tile Dedo, vata,

watering etc. Comp. to all face of tank . including

locking arrangement outlet, inlet, overflow and

washout outlet pipe arrangement as necessary & C.I.

Cover 0.60 x 0.45 weight not less then 35 kg with

Sr. No. Item Description Total Quantity Unit Rate Amount

(I) Landscaping Work

Grassing with selection No.1 grass In rows 5 cm

apart in both directions including watering and

maintenance of the lawn for 3 months or more till

the grass forms a thick lawn, free from weeds and fit

for mowing including supplying farm clay up

mm thick, sludge, manure, pesticides, extra earth,

disposal of rubbish, trench excavation and all labour

with lead and lift etc. complete as directed by EIC.

Providing & Planting of Deep rooted Tree plants

required Digging of pits 0.6mt. x 0.6mt x 0.6mt,

filling with goodearth with mixing of cow dong and

pesticide.planting the following plant of 4' to 6'

height stack it well, maintain it for 3 month name

of plants as below etc completed as dircted by

Champa Tree (6')

154 Garmalo Tree (6') 17 Nos. 275

155 Bottel Plam (6') 17 Nos. 600

Providing & Planting of Deep rooted exoitic palm

trees Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling

with good earth with mixing of cow dong and

156 pesticide.planting the following plant of 8' to 10' 10 Nos. 350

height stack it well, maintain it for 3 month as below

etc completed as dircted by E.I.C/PMC.

Ashoka Tree (8')

157 Gulmohar Tree (8') 10 Nos. 300

158 Kadam Tree (8') 10 Nos. 300

159 Neem Tree (8') 10 Nos. 270

160 Saptapani Tree (8') 10 Nos. 275

161 Golden Bamboo Plam (8') 10 Nos. 150

Providing & Planting of Ornamental shurbs Digging

of pits 0.6mt. x 0.6mt x 0.6mt, filling with good

earth with mixing of cow dong and

162 pesticide.planting the following plant of 4' to 6' 8 Nos. 375

height stack it well, maintain it for 3 month as below

etc completed as dircted by E.I.C/PMC.

Rafic Plant (4')

163 Red Ixora Plant (4') 8 Nos. 125

164 White Ixora (4') 8 Nos. 125

165 Karan Plant (4') 8 Nos. 60

166 Canna Plant (4') 8 Nos. 12

167 Panama Rose Plant (4') 8 Nos. 75

168 Lily Plant (4') 8 Nos. 12

169 Song of India Plant (4') 8 Nos. 150

Providing and supplying fine river silt (Kamp) as

directed by EIC

(J) Cricket Ground - Civil Work

Sr. No. Item Description Total Quantity Unit Rate Amount

Cutting for Ground - 200 MM :The work

comprises of excavating the ground to the required

depth as per the survey layout plan and requirements

, reconstructing the same within the specified time

with the treatment as per the specifications and

levels given in the enclosed drawing and dressing

the excavated earth as per the directions and levels. -

AREA -11027 SQM

Sandy loom soil 8” thick : first 4” layer than 2” x

2 layers each 4” & 2” layer 4” by vibro roller and

next layers by plate vibrator first 4” layer req.

compaction by vibro roller in dry and wet form and

next layer req.in 2” only statics rolling in form of

layer by plate vibrator.

Anti termite treatment of lawn area through

Chloropyriphose 20% E.C., 5 liter diluted in

liters water and applying solution @ 1.00 litre

solution per sqm each application in lawn / bed area

(two application) i/c cost of chemical) and as per

direction of officer-in-charge.

Grassing with selection No. 1 Doob grass including

watering and maintenance of the lawn for 30 days or

more till the grass forms a thick lawn, free from

174 weeds and fit for mowing including supplying good 11,027.00 Sqm 20.3

earth, if needed (the grass and good earth shall be

paid for separately).

With grass Turf

Providing and making Cricket Pitch having size of

22.65mt x 3.66mt. - 2 Nos. of Turf Wicket as below.

1st Layer - Supply and Laying Core sand 2"

Layering (as per approved sample) supply of all

labour,also includes dressing leveling of trench .

2nd Layer - Laying 4" BRICK LAYER with 1"

coarse sand filling.

3rd Layer - Supply & laying Core Sand 2"

Laying(as per approved sample)suplly fo all labour

also includes dressing leveliing of tranch 82ftx100ft

4th Layer - For making pitch supply & laying 4"

dry and wet compaction equally from bottom of top

level but in the form of Sandylome @ 90:10 OR 4”

175 layer of fine loomy sand (silt +sand in equal ratio) 2 Job 4,90,152.00

(as per approved sample) including supply of labour

with dressing & levelling of trench etc and also

includes dressing leveling of trench as desired

compaction and quantity is compacted @35 to 40 %.

Sr. No. Item Description Total Quantity Unit Rate Amount

5th Layer - Supply & laying compacted layer by

using palte vibrator of 8” good quality and

approved Clay soil / Black cotton soil with

compacted in 2” layers along with the using

scratching by panja and using plate vibrator x

times (as per approved sample) with water spreay

labour with proper grinding & shorting , dressing &

levelling of pitch as per desired level and

compaction, quality of clay soil shall be-as per BCCl

Norms supply of all labour, T & P etc and also

includes dressing leveling of trench

1. Have high clay contants 50-70%, Silt 5-20%, Fine

sand -10-20%, Medium sand -0-10%, Course sand –

2. Have good hydraulic conductivity.

3. Swell and shrink well, cracks to allow water and

air to penetrate deep and regenerate.

4. Retain moisture.

5. Encourage grass recovery.

6. PH Value shall be 7-8.

7. Crushing strength -0.8-1.6 MPA.

8. Cracking pattern –breaking in to 2-5 pcs.

9. Linear shrinkage- 8-15 preferably

10. Dispersion – between 0 &

11. Sodium content-,<3%

12. Organic matter-<5%.

Drain Pipe - Supply & laying lsl 110 MM PVC Pipe

(underneath) around the Pitch Square with a

gradient of 1:100 Feet and connected to the main

outward Drainage system through PVC / 4” dai Pvc

perforated pipe (perforation at half of the pipe at top

level), wrapped with geo-fabric cloth, covered by

stone granules, sand etc and at any one direction

along with the desired slope ratio. connected with

boundary storm water drain line.

Supply & layinglsl 150 MM PVC Pipe plain connect

to main strom water line with pitch block rain water

(K) Cricket Ground - Drainage Work

Earth work in excavation by mechanical means

(Hydraulic excavator )/ manual means over areas

(exceeding 30cm in depth. 1.5m in width as well as

10 sqm on plan) including dressing of sides and

176 ramming of bottom disposal of excavated earth, lead 238.05 Cum 272.6

upto 50m and lift upto 1.5m, disposed earth to be

levelled and neatly dressed. (No extra lift is payable

if work is done by mechanical means) All kinds of

Providing and laying in position cement concrete of

specified grade excluding the cost of centering and

shuttering - All work up to plinth level : Nominal

Mix -1 Cement : 3 sand : 6 graded stone aggregate

With 40mm nominal size graded stone aggregate.

Sr. No. Item Description Total Quantity Unit Rate Amount

Nominal Mix -1 Cement : 3 sand : 6 graded stone

aggregate (M 10)

Brick work with fly ash lime bricks (FALG Bricks)

conforming to IS:12894-2002, in super structure

above plinth level up to floor II level in :

Cement mortar 1:6 (1 cement : 6 sand)

15 mm cement plaster on the rough side of single or

179 half brick wall of mix : 690 Sqm 155.27

1:6 (1 cement : 6 sand)

Providing & Fixing of Precast RCC drain cover of

size 900x45x90mm (thickness) with

holes,manufactured by using M-30 grade of concrete

reinforced with two layers of 8mm dia Tor Steel

@100mm c/c both ways, manufactured by vibro

compaction process using joint less FRP moulds, so

at to achieve shuttering finish on five faces @top

face will have broom finish etc complete.

160 mm O.D./ 144 mm I.D. Corrugated Perforated

100 mm O.D./ 88 mm I.D. Corrugated Perforated

80 mm O.D / 72 mm I.D corrugated perforated PVC

184 Snap Fit Reducing Tee 160mmx100 mm 8 Nos. 1615

185 Snap Fit End Cap 100 mm 14 Nos. 180

186 Snap Fit End Cap 80 mm 145 Nos. 170

187 Snap Fit Couppler 100 mm 16 Nos. 170

188 Snap Fit Couppler 80 mm 28 Nos. 101

189 Snap Fit tee 100 mm 145 Nos. 1015

190 Snap Fit reducer 100 x 80 mm 145 Nos. 463

(L) Cricket Ground - Irrigation Work

Providing, laying & jointing in position PVC/ HDPE

pipe conforming to ISI standard and suitable for the

respective working pressures with all fittings and

191 accessories e.g. couplings, tees, bends, reducers, 78 Rmt 621

screwed adapters, flanged tail pieces etc. jointing as

per manufacturers' instruction,

PVC pipe 90mm-10 kg/cm2

Providing, laying & jointing in position PVC/ HDPE

pipe conforming to ISI standard and suitable for the

respective working pressures with all fittings and

192 accessories e.g. couplings, tees, bends, reducers, 480 Rmt 438

screwed adapters, flanged tail pieces etc. jointing as

per manufacturers' instruction,

PVC pipe 75mm-10 kg/cm2

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing, laying & jointing in position PVC/ HDPE

pipe conforming to ISI standard and suitable for the

respective working pressures with all fittings and

193 accessories e.g. couplings, tees, bends, reducers, 330 Rmt 307

screwed adapters, flanged tail pieces etc. jointing as

per manufacturers' instruction,

PVC pipe 63mm-10 kg/cm2

Providing, laying & jointing in position PVC/ HDPE

pipe conforming to ISI standard and suitable for the

respective working pressures with all fittings and

194 accessories e.g. couplings, tees, bends, reducers, 540 Rmt 199

screwed adapters, flanged tail pieces etc. jointing as

per manufacturers' instruction,

PVC pipe 50mm-10 kg/cm2

Providing, laying & jointing in position PVC/ HDPE

pipe conforming to ISI standard and suitable for the

respective working pressures with all fittings and

195 accessories e.g. couplings, tees, bends, reducers, 450 Rmt 123

screwed adapters, flanged tail pieces etc. jointing as

per manufacturers' instruction,

PVC pipe 40mm-10 kg/cm2

Providing, laying & jointing in position PVC/ HDPE

pipe conforming to ISI standard and suitable for the

respective working pressures with all fittings and

196 accessories e.g. couplings, tees, bends, reducers, 24 Rmt 585

screwed adapters, flanged tail pieces etc. jointing as

per manufacturers' instruction,

UPVC PIPE 2.5"SCH

Providing, laying & jointing in position PVC/ HDPE

pipe conforming to ISI standard and suitable for the

respective working pressures with all fittings and

197 accessories e.g. couplings, tees, bends, reducers, 24 Rmt 270

screwed adapters, flanged tail pieces etc. jointing as

per manufacturers' instruction,

UPVC PIPE 1..5"SCH

198 Earth work excavation and refilling 300x450mm 2,032.00 Rmt 60

Providing & fixing of I-25, Pop-up ROTOR

sprinkler 11.9-21.6 mtr radius rotor with automatic

arc return and non strippable drive part and full

circle in one model stainless steel riser,flow 13.6 to

120.7lpm - with CV (I-25 )- Hunter (USA). It

should have vandalism proof features like

automatic arc return, full and part in one and

non strippable gear drive

Providing & Fixing of Pop up Connecting Four

Elbow Swing joint Assembly. The fittings shall be

made of UV resistant thermo plastic. Swing

Connecting Assembly, 1”- Hunter (USA)

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and fixing of PP service saddle of

varying size.1"

Providing and fixing of PVC Ball Valve,security

pivot to maintain lever in space,double water tight

202 joint,direct injection stem non mechanical ,with a 13 Nos. 790

base which permits maximum penetration into the

valve of size 63mm.

Providing & fixing of Isolation Valve in mainline

for bypass and flow diversion of approved quality

Providing & fixing of a double acting 2" Air release

valve, The Air release valve shall be capable of both

204 releasing and admitting air from and into the line. 1 Nos. 2,413.37

The working pressure shall be 5 bar. Including

service saddle and riser assembly.

Providing & fixing of a double acting 1" Air release

valve, The Air release valve shall be capable of both

205 releasing and admitting air from and into the line. 2 Nos. 1,390.62

The working pressure shall be 5 bar. Including

service saddle and riser assembly.

Providing & fixing of 12" Rectangular Valve Box

206 with greenlid and corrugated structure with unique 12 Nos. 1,580.00

shovel access slot and bolt hole knockout

Providing & fixing of 6"Round box with greenlid

207 and corrugated structure with unique shovel access 15 Nos. 450

slot and bolt hole knockout

Providing & fixing of Brass Quick coupling valve

made up of solid brass with locking cover

corrosion resistant and stainless steel spring.

Including service saddle and riser assembly.

Providing & fixing of Brass Key threads into top of

209 QCV to provide water access And Brass Swivel 3 Nos.

Providing & Fixing of DISC FILTER- with

capacity matching pump design flow having an

suitable inlet connections , to create a helical effect

in the incoming water ,spinning particulate in

suspension away from the filtering element and so

minimizing cleanings frequency ,3/4" outlet for

flushing at bottom of filter & maximum working

presure of 10 Bars. with pressure gauge.

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing & Fixing of (Monoblock/Openwell

submersible) pumpset of having discharge 5 lps@56

mtr head . suitable for pumpset having panel box

211 and fixed alongwith following accessories starter 1 Nos. 56,700.00

,start / stop push buttons , Ammeter, Voltmeter

Indicating lamps, MCB , with 24VAC

OPERATIONcable, etc.

Providing and fixing of control panel suitable for

pumpset having panel box and fixed alongwith

212 following accessories starter ,start / stop push 1 Nos. 26,700.00

buttons , Ammeter, Voltmeter , Indicating lamps,

MCB , with cable, etc.

Providing & Fixing of ,Suction ,Delivery & Header

Providing & fixing of control Valve /Butterfly

214 Valve in mainline for bypass and flow diversion of 1 Nos. 4,590.00

approved quality 3"

Providing & fixing of Non Return Valve to

prevent back flow 3"

216 Providing and fixing of Pressure Release Valve 3" 1 Nos. 14,800.00

Installation,Commissioning , Supervision of 212 to

Supply and fixing of 1.5SQMM x 1C cable for

218 one way communication between controller and 4,200.00 Meter 28

219 PVC conduit Pipe complete 32 mm 580 Meter 43.31

Supply and fixing of PRO-C:

RESIDENTIAL/LIGHT COMMERCIAL

CONTROLLERS , cycle +soak, Raindelay,

220 SOLARSYNC Mini weather station, controlling 1 Nos. 45,800.00

upto 1 master valve with diagnostic feature in wire

shorttest ,voltage test at stations, standard

accessories complete

Supply and fixing of 2" Solenoid globe Valves with

fabric reinforced diaphram and rugged PVC

construction ,compatible with and slow closing to

prevent water hammer,pressure rating upto 10 bar

with 24AC solenoid, with provision to attach

Pressure Regulator

Supply and fixing of direct bury -on wire

222 connector with strain relief , with waterproof silicon 60 Nos. 230

223 voltage stabilizer 1 Nos. 7,500.00

Installation,Commissioning , Supervision of 240 to

(M) Filtration Work

Sr. No. Item Description Total Quantity Unit Rate Amount

Self Priming Pumpset with Prefilter body, pump

body, spiral, counterspiral and pump body lid made

of polypropylene, resistant to chemical products and

reinforced with fiber glass. Prefilter basket made of

zinc. Prefilter lid made of transparent polycarbonate

with four knobs locking system, carbon-ceramic

mechanical seal, stainless steel shaft 316L, rated

speed 1450 RPM 440V, 50Hz. Rated flow 60m3/hr

@ 11 meter head. 4.0kW / 5.5Hp. Suction/delivery :

Supply, installation, testing and commissioning of

Vertical Bobbin Wound FRP filters, 1600mm

diameter, 110mm x 5 butterfly valves, the inner

distribution system and under bed draw off system

shall be of hub and lateral type. The filter shall be

equipped with man-hole, manometer, air drain,

225 water/sand draining hole, inlet/outlet with flanges 1 Nos. 4,75,000.00

and minimum working pressure of 2.5 Kg/ cm2

with frontal piping, valves, manometer, pipe

supports and media complete in accordance to the

manufacturers specifications. Max permissible

velocity 30M/HR. Flow 60m3/hr. Minimum bed

depth of filter - 1200mm.

Supply, installation, testing and commissioning of

direct cylinder mounted type gaseous chlorinator,

with vacuum regulator, integrated safety valve, filter

226 and pressure gauge, flow meter, ejector, non-return 1 Nos. 3,50,000.00

valve, PE tubing, ammonia bottle and spanner.

Capacity 0-4 kg/hr with Booster pump, piping,

control valves and pressure gauge.

Supply of 100 kg filled chlorine gas cylinder in

accordance to the specifications

Supply of Safety test kit for chlorine gas cylinder in

accordance to the specifications

Supply of Double state self contained open circuit

229 compressed air breathing apparatus in Accordance 1 Nos. 45,000.00

to the specifications

230 Regulable floor inlets. 12 Nos. 1,000.00

231 Vaccum / Suction inlets 2 Nos. 1,000.00

232 Stainless Steel Main drain grills 500 x 500mm. 1 Nos. 45,000.00

Self Priming Pumpset with built-in pre filter with

transparent lid, carbon-ceramic mechanical seal,

stainless steel shaft, rated speed 3000 RPM 440V,

50Hz. Rated flow 21m3/hr

60cm Stainless Steel vacuum head with hooks for

attaching towing ropes and 30 mtrs towing rope

235 Self floating hose 30 mtrs, 50mm dia 1 Nos. 15,000.00

236 Telescopic pole 9 mtrs 1 Nos. 11,000.00

237 Aluminum reinforced Deep Net, clip type 1 Nos. 3,500.00

90cm aluminum reinforced curved brush with

plastic bristles, clip type

Sr. No. Item Description Total Quantity Unit Rate Amount

45mm Aluminum reinforced curved brush with SS

bristles, clip type

240 Providing hand held electronic ORP tester. 1 Nos. 15,000.00

241 Providing hand held electronic pH tester. 1 Nos. 5,000.00

Providing reagent based Residual/Free Chlorine &

Supply, installation, testing and commissioning of

Stainless Steel 3 treads ladder with anti skid step

Supply, installation, testing and commissioning of

Stainless Steel 5 treads ladder with anti skid step

Providing & fixing pool overflow modular grating

240 x 23mm as per specifications

Supply, installation, joining and testing PVC pipe

confirming to IS : 4985 class IV 10Kg/cm2

including all fittings such as such as bends, elbows,

reducers, tees, union, coupler, tail piece flange etc.

Cost shall be inclusive for providing supports as per

specifications and making good. Pipes shall be

connected to pumps, equipments, valves etc through

tail piece flange.

246.01 63mm dia 6 Rmt 510

246.02 75mm dia 12 Rmt 680

246.03 90mm dia 60 Rmt 850

Providing & Fixing sluice Valve of 4" with extended

spindle accordance with technical specifications.

Providing & Fixing 75mm dia PVC double union

ball valve to the suction sweeper line in plant room

249 Butterfly valve 110mm 4 Nos. 5,900.00

250 Ball type NRV 110mm 2 Nos. 15,900.00

Design, manufacture, supply, installation, testing

and commissioning of integrated, cubical type dead

front, extensional, 16 SWG CRCA sheet steel

control panel to the foundation. The control panel

should be suitable for 440 volts, 50 Hz, 4 wire

Providing & fixing S.S. anchors for Anti-wave

racing lanes in pool etc.complete.

Providing & handing over of 25 mtrs. anti-wave

253 racing lanes in red, white and blue coloured floats 3 Nos. 50,000.00

with Stainless Steel cable, fasteners and hooks.

Providing SS reels/ roller for lane storage. Each

254 roller should be capable to accommodate 3 (three) 1 Nos. 1,10,000.00

25 meters racing lanes

Providing and handing over of 450mm starting

platform with a slip resistant top surface, a slip-

resistant step and anchors. Platform assembly can be

removed by unscrewing fasteners as and when

required. The same will be in accordance to the

specifications.

Sr. No. Item Description Total Quantity Unit Rate Amount

(N) Plumbing & Drainage Work

Providing and fixing to wall, ceiling and floor

galvanised Mild steel tubes (Medium grade) of the

256 following ominal bore, tube fitting and clamps 115 Rmt 249.99

including making good the wall ceiling and floor.(A)

Providing and fixing to wall, ceiling and floor

galvanised Mild steel tubes (Medium grade) of the

257 following nominal bore, tube fitting and clamps 115 Rmt 300.99

including making good the wall ceiling and floor.(B)

Providing and fixing to wall, ceiling and floor

galvanised Mild steel tubes (Medium grade) of the

258 following nominal bore, tube fitting and clamps 140 Rmt 397.97

including making good the wall ceiling and floor.(C)

Providing and fixing to wall, ceiling and floor

galvanised Mild steel tubes (Medium grade) of the

259 following nominal bore, tube fitting and clamps 115 Rmt 496.01

including making good the wall ceiling and floor.(D)

Providing and fixing to wall, ceiling and floor

galvanised Mild steel tubes (Medium grade) of the

260 following nominal bore, tube fitting and clamps 115 Rmt 602.33

including making good the wall ceiling and floor.(E)

Providing and fixing to wall, ceiling and floor

galvanised Mild steel tubes (Medium grade) of the

261 following nominal bore, tube fitting and clamps 115 Rmt 786.32

including making good the wall ceiling and floor.(F)

Providing and laying in trenches galvanised mild

steel tubes (Medium grade) of the following nominal

bore, and tube fitting (Earthwork in trenches to be

measured and paid for separately)(A) 15mm

Providing and laying in trenches galvanised mild

steel tubes (Medium grade) of the following nominal

bore, and tube fitting (Earthwork in trenches to be

measured and paid for separately)(B) 20mm

Providing and laying in trenches galvanised mild

steel tubes (Medium grade) of the following nominal

bore, and tube fitting (Earthwork in trenches to be

measured and paid for separately)(C) 25mm

Providing and laying in trenches galvanised mild

steel tubes (Medium grade) of the following nominal

bore, and tube fitting (Earthwork in trenches to be

measured and paid for separately)(D) 40mm

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and laying in trenches galvanised mild

steel tubes (Medium grade) of the following nominal

bore, and tube fitting (Earthwork in trenches to be

measured and paid for separately)(E) 65mm

Providing and laying in trenches galvanised mild

steel tubes (Medium grade) of the following nominal

bore, and tube fitting (Earthwork in trenches to be

measured and paid for separately)(F) 80mm

Making connection of galvanised Mild steel

distribution branch with galvanised mild steel main

268 50mm to 80mm nominal bore by providing and 16 Each 939.69

fixing tee including cutting and threading the pipes

Providing and fixing to wall ceiling and floor

Kg. F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall

clipsetc. including making good the wall ceiling and

Providing and fixing to wall ceiling and floor

Kg. F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall

clipsetc. including making good the wall ceiling and

Providing and fixing to wall ceiling and floor

Kg. F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall

clipsetc. including making good the wall ceiling and

Providing and fixing to wall ceiling and floor

Kg. F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall

clipsetc. including making good the wall ceiling and

floor.(D) 40mm Wash Out Pipe

Providing and fixing to wall ceiling and floor

Kg. F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall

clipsetc. including making good the wall ceiling and

floor.(E) 50mm Wash Out Pipe

Providing and fixing to wall ceiling and floor

Kg. F/Cm2 working pressure polythene pipes of the

following outside Dia. Low densidy, complete with

274 special falnge compression type fittings, wall 175 Rmt 277.46

clipsetc. including making good the wall ceiling and

floor.(F) 75mm ( Waste Pipe & Rain & Balcony

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and fixing to wall ceiling and floor

Kg. F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall

clipsetc. including making good the wall ceiling and

floor.(G)110 mm ( Rain & Balcony Drain)

Providing and fixing water closet squatting Pan

(Indian type W.C. Pan) size 580mm (Earthwork, bed

276 concrete, foot reste and trap to be measured and paid 3 Each 1,009.10

for separately) (A) Vitreous China.(I) Long pattern =

Providing and fixing wsh down water closet

(European type, W.C. Pan) with integral P or S trap

including jointing the trap with soil pipe in Cement

Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover

to be measured and paid for separately)(A) vitreous

China Pattern :(i) in white colour

Providing and fixing 100mm size P or S trap for

water closet squatting pan including jointing the trap

with the pan and soil pipe in cement Mortar 1:1 (1-

Cement : 1-Fine sand)(A) Vitreous China.

Providing and fixing in Cement Mortar 1:3 (1-

Cement : 3-coarse sand)a, pair of white vitreous

China 250mm x 130mm x 30mm footrest to long

pattern squatting pan water closet.

Providing and fixing 12.5 Litres low level flushing

cistern with a pair, of C.I. or Mild brackets,

complete with fittings such as lead valve less

syphon, 15mm nom.nal size brass ball valve with

polythene float, C.P brass handle unions and

couplings for connections, with inlet, outlet and

overflow pipes, 40mm dia. porcelain enamelled

flush bend including cutting holes in walls and

making good the same connecting the flush bend

with cistern and closet (overflow pipe to be

measured and paid for separately)(A) Vitreous

China (I) In white colour

Providing and fixing 12.5 Litres high level C..I.

flushing cistern with A pair of C.I. or Mild steel

brackets, womplete with fittings such as syplionic

arrangement, 15mm nominal size brass ball valve

281 with polythene float, lever G.I. China (60 cm. ) and 3 Each 1,564.63

pull union and couplings for connections with inlet,

outlet and overflow pipes etc. including cutting

holes in walls and making good the same (overflow

pipe to be measured and paid fo separately )

Providing and fixing in position with clamps etc.

32mm nominal internal diameter galvanised steel

282 tube flush pipe for high level flushing cistern 3 Rmt 344.07

including connecting the flush pipe with cistern and

closet and making good the walls and floors.

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and fixing G.I. inlet connection for flush

pipe with W.C. Pan

Providing and fixing plastic seat and cover for wash

284 down water closer with C.P. brass hinges and rubber 3 Each 288.45

buffers. (B) Black plastic seal and cover.

Providing and fixing washbasin with single hole for

pillar tap with C.I. or M.S. brackets painted white

including sutting holes and making good the same

but excluding fittings.(A) Vitreous China:(ii) Flat

Back washbasin 550 mm x v 400mm size. (i) In

Providing and fixing Kitchen sink with C.I. or M.S.

brackets, painted white including cutting holes in

286 walls and making good the same but excluding 3 Each 2,303.62

fittings. (C) Vitreous China Sink.(i) 600mm x

450mm x 150mm size

Providing and fixing C.P. brass waste for washbasin

or sink. (A) 32mmdia.

Providing and fixing C.P. brass waste for washbasin

or sink. (B) 40mm dia.

Providing and fixing M.I. fisher union for washbasin

or sink. (A) 32mm dia.

Providing and fixing M.I. fisher union for washbasin

or sink. (B) 40mm dia.

Providing and fixing 100mm sand cast iron grating

for gully, floor or Nahni trap.

Providing and fixing C.P. brass shower rose with

15mm or 20mm inlet.(A) 100mm dia. Each

Providing and fixing 600mm x 450mm bevelled

edge mirrror of superior glass mounted on 6mm

thick A.C. sheet or plywood sheet and fixing to

wooden pluge with C.P. brass screws and washers.

Providing and fixing C.P. brass towel rail comlete

294 with C.P. brass brackets fixed to wooden plugs with 11 Each 610.32

C.P. brass scews.(B) 600mm x 20mm size.

Providing and fixing 600mm x 120mm glass shelf

295 with C.P. brass bracket and guard rail complete 11 Each 553.66

mixed to wooden plug with C.P. brass screws.

Providing and fixing screw down bib taps of

296 following size.(A) Brass screw down bib tap 11 Each 184.98

polished bright. (i) 15mm dia.

Providing and fixing screw down bib taps of

297 following size.(A) Brass screw down bib tap 11 Each 212.68

polished bright. (ii) 20mm dia.

Providing and fixing screw down bib taps of

298 following size.(B) Brass chromium plated screws 11 Each 184.98

down Bib Tap. (i) 15mm dia.

Providing and fixing screw down bib taps of

299 following size.(B) Brass chromium plated screws 11 Each 212.68

down Bib Tap. (ii) 20mm dia.

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and fixing screw down bib taps of

300 following size.(C) Gun metal screw down bib tap. 25 Each 157.29

Providing and fixing screw down bib taps of

301 following size.(C) Gun metal screw down bib tap. 16 Each 176.09

Providing and fixing pillar tap, capstan head, screw

302 down high pressure with screws, shanks and back 16 Each 305.67

nuts. (i) 15mm dia.

Providing and fixing pillar tap, capstan head, screw

303 down high pressure with screws, shanks and back 13 Each 351.18

nuts. (ii) 20mm dia.

Providing and fixing brass screw down stop tap.(A)

Providing and fixing brass screw down stop tap.(B)

Providing and fixing brass screw down stop tap.(C)

Providing and fixing Gun metal check or non-return

fullway wheel valve.(A) 15mm dia.

Providing and fixing Gun metal check or non-return

fullway wheel valve.(B) 20mm dia.

Providing and fixing Gun metal check or non-return

fullway wheel valve.(C) 25mm dia.

Providing and fixing Gun metal check or non-return

fullway wheel valve.(D) 32mm dia.

Providing and fixing Gun metal check or non-return

fullway wheel valve.(E) 40/50 mm dia.

Providing and fixing chromium plated brass half

312 trun flush cock of approved quality including fixing 16 Each 252.26

in pipe line etc. complete.(i) 20mm dia.

Providing and fixing chromium plated brass half

313 trun flush cock of approved quality including fixing 13 Each 261.16

in pipe line etc. complete.(ii) 25mm dia.

Providing and fixing chromium plated brass half

314 trun flush cock of approved quality including fixing 12 Each 273.03

in pipe line etc. complete.(iii) 32mm dia.

Providing and fixing Urinal or approved quality

including conecting the Urinal with waste pipe , tap

etc. complete.(A) White earthenware flat back or

corner type size 430mm x 260mm x 350mm.

Providing and fixing Urinal of approved quality

including connection with trap and with integral

longitudinal flush pipe.(A) Squating plate pattern

white earthenware 550mm x 300mm.

Providing and fixing Rubber plug for sink or wash

Providing and fixing chromium plated, bottle trap

318 with necessary couplings of approved quality for 27 Each 292.87

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and fixing ball cock of approved. quality

as directed.(A) Copper Metal (i) 25mm dia.

Providing and fixing ball cock of approved. quality

as directed.(A) Copper Metal (ii) 50mm dia.

Providing and fixing ball cock of approved. quality

as directed.(B) Abonite (i) 25mm dia.

Providing and fixing ball cock of approved. quality

as directed.(B) Abonite (ii) 50mm dia.

Providing and fixing C.I. Manhole cover 0.60 M. x

0.45M. size having weight not less than 35Kg.

Providing and fixing G.I. Rain water spout of 50mm

dia. and 30cm. length.

Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube

fittings and clamps including making good the wall,

ceiling and floor etc. complete.[A] 15 mm.

Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube

fittings and clamps including making good the wall,

ceiling and floor etc. complete. [B] 20 mm.

Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube

fittings and clamps including making good the wall,

ceiling and floor etc. complete. [C] 25 mm.

Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube

fittings and clamps including making good the wall,

ceiling and floor etc. complete. [D] 32mm.

Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube

fittings and clamps including making good the wall,

ceiling and floor etc. complete. [E] 40mm.

Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube

fittings and clamps including making good the wall,

ceiling and floor etc. complete. [F] 50mm.

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes, having thermal stability for hot &

cold water supply including all CPVC plain & brass

threaded fittings This includes jointing of pipes &

fittings with one step CPVC solvent cement,

trenching, refilling & testing of joints complete.

External -Underground - piping Works :- 65mm

Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes, having thermal stability for hot &

cold water supply including all CPVC plain & brass

threaded fittings This includes jointing of pipes &

fittings with one step CPVC solvent cement,

trenching, refilling & testing of joints complete.

External -Underground - piping Works :- 80mm

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes, having thermal stability for hot &

cold water supply including all CPVC plain & brass

threaded fittings This includes jointing of pipes &

fittings with one step CPVC solvent cement,

trenching, refilling & testing of joints complete.

External -Underground - piping Works :-100mm

Providing laying and jointing in true line and level

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including

cost of all materials.

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing laying and jointing in true line and level

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including

cost of all materials.

Providing laying and jointing in true line and level

32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including

cost of all materials.

Providing laying and jointing in true line and level

40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including

cost of all materials.

Providing laying and jointing in true line and level

50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including

cost of all materials.

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing, laying and jointing in true line and level

160 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 160 mm

diametre x 210 mm length x 196 mm heigh at every

2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement

including cost of all materials.

Providing, laying and jointing in true line and level

110 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm heigh at every

2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement

including cost of all materials.

Providing and fixing PVC SWR Nahni trap IS

14735 for drain - 100 mm diameter with jali of the

341 following nominal diameter of self cleansing design 65 each 594.29

with C.I scread down or hinged grating including the

cost of cutting and making good the walls.

Providing and fixing PVC SWR Nahni trap IS

14735 for drain - 75 mm diameter with jali of the

342 following nominal diameter of self cleansing design 45 each 582.44

with C.I scread down or hinged grating including the

cost of cutting and making good the walls.

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and fixing white vitreous china extended

wall mounted water closet (European type) of

size 370 x 535 x 405 mm of approved shape

including providing and fixing white vitreous china

cistern with dual flush fitting of flushing capacity

litter/ 6 litter, including seat and lid, fittings &

C.I.brackets, 40 mm flush bend, overflow

arrangement with specials of standard make and

mosquito proof coupling of approved design

complete, including chair brackets, nuts, rag

bolts, painting of fittings and brackets, cutting

and making good the walls and floors wherever

required. Wall mounted water closet of Jaquar :

CNS-WHT-959NN Concealed Cistern: JCS-WHT-

2400 & Dual Flush Plate Cat. No.: JCP-CHR-

152415, Health Faucet ALD-CHR-573 or

Equivalent approved Make . ( Cera/

Jauar/Hindware/Parryware or Eq. Make)

Providing & fixing of first quality white

vitreous china Oval type Wash basin as per

product detail, including specially fabricated C.I.

brackets with studs painted with two or three

coats of enamel paint of approved shade over a coat

of primer complete including filling gap between

counter and wash basin with approved sanitary

grade material, cutting & making good the walls

where required to the complete satisfaction of

the Engineer in Charge. Oval Wash Basin of

Jaquar - FLS-WHT-5701; Rag Bolts for Wash

Basins, Bottle Trap: Jaquar ALD-769L300x190,

Waste Coupling: Jaquar: Cat. No.: ALD-705,

Prismatic Pillar Cock: Jaquar PRS-031 or

Equivalent approved Make . ( Cera/

Jauar/Hindware/Parryware or Eq. Make)

Providing & fixing of first quality white

vitreous china Wash basin as per product

detail, including specially fabricated C.I.

brackets with studs painted with two or three

coats of enamel paint of approved shade over a coat

of primer complete including filling gap between

counter and wash basin with approved sanitary

grade material, cutting & making good the walls

where required to the complete satisfaction of the

Engineer in Charge. Wash Basin CNS-WHT-

811; Rag Bolts for Wash Basins, Bottle Trap:

Jaquar ALD- 769L300x190, Waste Coupling:

Jaquar: Cat. No.: ALD-705, Prismatic Pillar

Cock: Jaquar PRS-031 or Equivalent approved

Make . ( Cera/ Jauar/Hindware/Parryware or Eq.

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and fixing white vitreous china flat back

urinal of approx. size 375 x 315 x 620mm having

water inlet & outlet from back side, including

fixing to wall with suitable brackets all as per

346 manufacturers specification and direction of 12 Nos. 7,500.00

Engineer-in-charge. Urinal: Jaquar Make URS-

WHT-13253O, Urinal Flush

PRS-073 or Equivalent approved Make . ( Cera/

Jauar/Hindware/Parryware or Eq. Make)

Providing and fixing of Jaquar Urinal Partition

(Model no.- 1810-UC /1810-US) made of 8mm

colour chrome Toughened Glass & Frosted in

Curved Shaped height 900 mm width 450mm or

equivalent make including all necessary fitting to be

fixed by drilling holes with Brass bracket in

Chrome finish all

Complete as per drawing and directed by engineer-

In-Charge. ( Cera/ Jauar/Hindware/Parryware or Eq.

Providing & fixing Single Lever concealed Diver

348 with Over head wall Shower and Spout Assembly, ( 12 Nos. 9,500.00

Cera/ Jauar/Hindware/Parryware or Eq. Make)

Providing & fixing of Health faucet with Angular

349 Cock Assembly( Cera/ Jauar/Hindware/Parryware 23 Nos. 2,500.00

Handicaped Toilet

Providing and Fixing Handicap Toilet set including

EWC, Cistern, Seat Cover, Fittings, Washbasin,,

Hinged Rail, Grab Bar and Faucet with Spatula

Lever including Cast Iron chair backed and

necessary bolts and nuts complete, including

painting of fittings and brackets, cutting and

350 making good the walls and floors wherever 3 Nos. 41,059.00

required to the satisfaction of Engineer-In-Charge.

Special Needs Toilet Set: Jaquar - CNS-WHT-

755SN + Cistern Set CNS-WHT-207, Wash Basin

CNS-WHT-811 & Grab Bar 2 No. - WAC-

WHT-BG0800 & WAC-WHC-BR0600 - 2 nos.+ or

Equivalent approved Make ( Cera/

Jauar/Hindware/Parryware or Eq. Make)

Providing and fixing 2 Nos. support arms and

backrest to mount at fixed height (Commander or

351 equivalent) for handicap toilet complete as 3 Nos. 26,550.00

recommended by the E-I-C. ( Cera/

Jauar/Hindware/Parryware or Eq. Make)

Providing and fixing raised toilet seat with cover for

handicap toilet (Commander or equivalent) as

recommended by the E-I-C ( Cera/

Jauar/Hindware/Parryware or Eq. Make)

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and fixing brackets, tracks with flexible

feed & waste pipes for adjustable type wash basin

353 complete as recommended, for handicap toilet 3 Nos. 25,000.00

(Commander or equivalent) ( Cera/

Jauar/Hindware/Parryware or Eq. Make)

Providing and fixing white vitreous china extended

wall mounted bidet pan (European type Wall

Hung Bidet ) of size 550 x 370 x 340 mm of

approved shape including providing and fixing hot

and cold water mixer inbuilt assembly , including

seat and lid, fittings & C.I.brackets, washout,drain

arrangement with specials of standard make and

mosquito proof coupling of approved design

complete, including chair brackets, nuts, rag

bolts, painting of fittings and brackets, cutting

and making good the walls and floors wherever

required. Wall mounted Bidet closet of Cera :

Cat. No. S5020101 Bidet white or Equivalent

approved Make . ( Cera/

Jauar/Hindware/Parryware or Eq. Make)

Supplying Installing & fixing white vitreous china

flat back urinal of size 590x375x390mm as per IS-

2556 (Part-2 ) with C.I. hangers and 15mm dia. C.P.

spreader,15MM cCP angular Stop Cock ,Flexible

pipe Connecion, 32mm dia CP bottle trap and pipe

to wall with C.P. flange complete including cutting

and making good the walls and floors wherever

required. Jaquar-URS-WHT-13255 Urinal Without

Sensor With Fixing Accessories, Size: 480x300x740

mm ( Jaquar, Kohler, Cera or Eq. )

Supplying Installing & fixing of concealed type

urinal sensor with concealed body, divertor, cock

with wall flange and complete., for the following

356 sizes. SNR-STL-51087 Sensor Concealed Type 4 Nos. 12,500.00

Flushing Valve for Urinal Complete Set with

Installation Box with Control Cock (Battery

Operated) ( Jaquar, Kohler, Cera or Eq. )

Supplying Installing & fixing of Flush Valve Auto

operation cock with wall Flange 32mm with lever

knob complete in all respects including cutting and

making good the walls etc. FLV-1085N

Metropole Flush Valve Dual Flow 32mm Size

(Concealed Body) with Exposed Shut Off Provision

& Round Flange (3.0/6.0 Lts. Per Flushing) (

Jaquar, Kohler, Cera or Eq. )

Supplying Installing & fixing of Pressmatic open

type anguler cock concealed flush Valve Auto

operation cock with wall Flange 15mm with lever

knob complete in all respects including cutting and

358 making good the walls etc. for Urinal area Flsuh :- 14 Nos. 2,850.00

Sr. No. Item Description Total Quantity Unit Rate Amount

Urinal Valve Auto Closing System with Built-in

Control Cock & Wall Flange ( Jaquar, Kohler, Cera

Supplying Installing & fixing of Pressmatic open

type Bib Tap wall Monted type Auto operation cock

with wall Flange 15mm with lever knob complete in

all respects including cutting and making good the

walls etc. for Press Matic Bib cock- Wall Mounted :-

PRS-043 Bib Cock Auto Closing System with

Built-in Control Cock With Wall Flange ( Jaquar,

Kohler, Cera or Eq. )

Supplying Installing & fixing stainless steel sink,

R.S. or C.I. Painted brackets painted, 40mm dia.

C.P. waste, C.P. brass chain and rubber plug,

strainer with necessary C.P. brass unions complete

including painting the fittings and cutting and

360 making good the walls wherever required, with CP 6 Nos. 12,500.00

sink cock with raised "J" shaped swinging spout.

NIRALI - GRACE - PLAIN - 510 X 432 MM

(ONLY BOWL) SINK COCK WALL MOUNTED

WITH J-SHAP SWIING OPERATION - ( Nirali-

Jaquar, Kohler, Cera or Eq. )

Providing and fixing 9 mm thick nitrial electrometic

insulation tube over pipes in wall chase and filling

the wall chase as per manufature's specifications for

361 hot water insulation with over aluminium tape 160 Rmt 75

covering over the insulation. Open Line work :

covered installation/) (Tharmaflex, Accoflex,

Superloan Makes)15mm pipe Size

Providing and fixing 9 mm thick nitrial electrometic

insulation tube over pipes in wall chase and filling

the wall chase as per manufature's specifications for

362 hot water insulation with over aluminium tape 135 Rmt 100

covering over the insulation. Open Line work :

covered installation/) (Tharmaflex, Accoflex,

Superloan Makes)20mm pipe Size

Providing and fixing 9 mm thick nitrial electrometic

insulation tube over pipes in wall chase and filling

the wall chase as per manufature's specifications for

363 hot water insulation with over aluminium tape 175 Rmt 125

covering over the insulation. Open Line work :

covered installation/) (Tharmaflex, Accoflex,

Superloan Makes)25mm pipe Size

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and fixing 9 mm thick nitrial electrometic

insulation tube over pipes in wall chase and filling

the wall chase as per manufature's specifications for

364 hot water insulation with over aluminium tape 150 Rmt 150

covering over the insulation. Open Line work :

covered installation/) (Tharmaflex, Accoflex,

Superloan Makes)32mm pipe Size

Providing and fixing 9 mm thick nitrial electrometic

insulation tube over pipes in wall chase and filling

the wall chase as per manufature's specifications for

365 hot water insulation with over aluminium tape 150 Rmt 175

covering over the insulation. Open Line work :

covered installation/) (Tharmaflex, Accoflex,

Superloan Makes)40mm pipe Size

Providing and fixing gun metal gate valve with C.I.

366 wheel of approved quality (screwed end) : 25 mm 28 Each 508.13

Providing and fixing gun metal gate valve with C.I.

367 wheel of approved quality (screwed end) : 20 mm 28 Each 440.84

Providing and fixing gun metal gate valve with C.I.

368 wheel of approved quality (screwed end) :32 mm 28 Each 557.45

Providing and fixing gun metal gate valve with C.I.

369 wheel of approved quality (screwed end) :40 mm 28 Each 667.79

Providing and fixing gun metal gate valve with C.I.

370 wheel of approved quality (screwed end) :50 mm 28 Each 838.18

Providing and fixing gun metal gate valve with C.I.

371 wheel of approved quality (screwed end) :65 mm 23 Each 1408.27

Providing and fixing gun metal gate valve with C.I.

372 wheel of approved quality (screwed end) :80 mm 20 Each 2105.4

Providing and fixing C.I. sluice valves (with cap)

complete with bolts, nuts 100mm dia. Class.II

Providing and fixing ball valve (brass) of approved

374 quality, High or low pressure, with plastic floats 19 Each 332.17

complete : 15 mm nominal bore

Providing and fixing ball valve (brass) of approved

375 quality, High or low pressure, with plastic floats 19 Each 373.85

complete : 20 mm nominal bore

Providing and fixing ball valve (brass) of approved

376 quality, High or low pressure, with plastic floats 19 Each 375.1

complete : 25 mm nominal bore

Providing and fixing gun metal non- return valve of

377 approved quality (screwed end) : Vertical : 25 mm 17 Each 504.49

Sr. No. Item Description Total Quantity Unit Rate Amount

Providing and fixing gun metal non- return valve of

378 approved quality (screwed end) : Vertical : 32 mm 17 Each 694.16

Providing and fixing gun metal non- return valve of

379 approved quality (screwed end) : Vertical : 40 mm 17 Each 926.4

Providing and fixing gun metal non- return valve of

380 approved quality (screwed end) : Vertical : 50 mm 17 Each 1168.21

Providing and fixing gun metal non- return valve of

381 approved quality (screwed end) : Vertical : 65 mm 16 Each 1852.4

Providing and fixing gun metal non- return valve of

382 approved quality (screwed end) : Vertical : 80 mm 15 Each 3116.54

Providing and placing on terrace (at all floor levels)

polyethylene water storage tank, IS :

marked, with cover and suitable locking

arrangement and making necessary holes for inlet,

outlet and overflow pipes but without fittings and

the base support for tank.

Providing and fixing C.I. double acting air valve of

approved quality with bolts, nuts, rubber insertions

etc. complete (The tail pieces, tapers etc if required

will be paid separately) : 50 mm dia

Providing and fixing C.I. double acting air valve of

approved quality with bolts, nuts, rubber insertions

etc. complete (The tail pieces, tapers etc if required

will be paid separately) : 80 mm dia

Providing and fixing enclosed type water meter

(bulk type) conforming to IS : 2373 and tested by

386 Municipal Board complete with bolts, nuts, rubber 4 Each 3105.26

insertions etc. (The tail pieces if required will be

paid separately) : 80 mm dia nominal bore

Providing and fixing enclosed type water meter

(bulk type) conforming to IS : 2373 and tested by

387 Municipal Board complete with bolts, nuts, rubber 4 Each 4686.05

insertions etc. (The tail pieces if required will be

paid separately) : 100 mm dia nominal bore

Making holes upto 50mm dia. 300mm long in any

RCC members by diamond Core Cutting machine

of HILTI or equivalent including disposing the

debries,all works refinishing of the GP-2 pipe grout

complete with water proof testing etc completed as

directed by E.T.C/PMC .

Sr. No. Item Description Total Quantity Unit Rate Amount

Making holes upto 100mm dia. 300mm long in any

RCC members by diamond Core Cutting machine of

HILTI or equivalent including disposing the

debries,all works refinishing of the GP-2 pipe grout

complete with water proof testing etc completed as

directed by E.T.C/PMC ..

Making holes upto 150mm dia. 300mm long in any

RCC members by diamond Core Cutting machine of

HILTI or equivalent including disposing the debries

all works refinishing of the GP-2 pipe grout

complete with water proof testing etc completed as

directed by E.T.C/PMC .

PVC PIPE SLEEVE WORK DURING

CONSTRUCTION PHASE:-

Providing and fixting of the PVC -6kg. pipe sleeves

of 75mm,100mm&150mm dia pipe during civil

391 work casting works, the lenght of pipe should be 90 Nos. 100

450mm and 300mm as per the requirments, the

sleeve works must be coordinated with the civil

agency, beam, sleeves, slab and RCC reating walls

etc. complete as directed by EIC/Architect

SITC of Heavy duty PVC flexible pipe of 25mm dia

with 15 meter length , the pipe shouble be included

Gunmetal hose nozzel at the termination point. For

392 gaden manual irrigation purpose. As per the site eng. 49 Nos. 2,000.00

incharge and as per the guide line o be execute.

(Pipe:- Ashirvad, Kissan, Supreme, valve RB,

Zoloto, Audco or Eq. Make)

CENTRIFUGAL PUMPS ,Suppying, installing,

testing and commissioing of centrifugal monoset

submersible pumps with c.i. casing, Bronze

impeller, SS Shaft and driven by 415 V AC,

phase, 50HZ., motor running at 2900 rpm speed and

shall be supplied with all accessories viz., base plate,

393 coupling, motor, starter panel, cabling up to panel, 3 SET 1,45,000.00

dry ru protection, auto level sensor float switch

operation,earthing,delivery & header pipes & valves

etc., complete.. (UG tank to OHT feede and Softener

Inlet Set ) ( Make Grundfos / ITT Lowara or

Eq.)Capacity : 10.0 mtr3/hr. x 45mtr. head

working 1 stand by set.

Providing and fixing elecatrical ot water geyser of

having capacity of 10 ltr. Storage with including

necessary inlet, outlet connection, safety valve,

394 elecatical necessary cabel requirments, including 3 SET 5,000.00

fastning and fixing in the clamp and other protection

all complete works. ( AO Smith, Jaquar, Spearhot or

Sr. No. Item Description Total Quantity Unit Rate Amount

WATER COOLER AND R.O PLANT ; Supply,

installation, testing & commissioning of S.S. storage

type water cooler with inbuilt R.O. plant

50LTR/HR. CAP.of primary & seconadary tratent

with on line U.V. fultration along with built in

booster pumps all intercnnectio piping, supports and

valve and other electrical requirment ,along with

inbuilt storage tank with nessesarry accessories,

safety valve, air valve, drain arrangement, all

insturumentation, base frame, necessary

electrification, etc. complete for Drinking Water

supply. ( Voltas, Blu star, Power H2o Make)

Capacity : 180 storage capacity. Complete as

directed by EIC/Architect

WTP/ SOFTENER PLANT SYSTEM:-

CENTRALIZED SYSTEM ( LOCATION AT

PUMP ROOM/BASEMENT LVL.) -Supply

installation, testing and commissioning of dometic

water treatment plant comprising of pressure sand

filter, multi media, activated carbon filter,

chlorination, etc. accrording to input water

quality/analysis. The scope shall include

interconnection piping, valves, instruments, back

wash arrangement, etc. complete ( Paintair

Ionexchange, Tharmax, PowerH2o Make) Input

Flow Rate : 10. mtr3/hr.Output water : As per IS

requirment < 10 PPM Supply installation, testing

and commissioning of online softner plant consisting

of fiber glass reinforced plastic (FRP) tank, filter

media, resins, piping, isolation valves, instruments

supports, etc. complete. Input Water Hardness :-

PPM to 1000 PPM ( As per Water Test can be

verify )Output Water Hardness : < 50 PPM (

Hydro Pneumatic Pressure Pump ( Domestic Water )

Suppying, installing, testing and commissioing of

Vertical Multistage Booster Pump with c.i. casing,

Bronze impeller, SS Shaft and driven by 415 V AC,

3 phase, 50HZ., motor running at 2900 rpm speed

and shall be supplied with all accessories viz., base

plate, coupling, motor, starter panel, cabling up to

panel, earthing,delivery & header pipes & valves

etc., complete. (Domestic Pressure Pump at Terrace

lvl.)( Grundfos, ITT Lowara, or Eq.Make)Capacity :

15mtr3/hr.2 Nos. pumps ( 1 Working + 1 Stand by

Set)Head : 40 mtr. Booster Tank 100 ltr.

Sr. No. Item Description Total Quantity Unit Rate Amount

Hydro Pneumatic Pressure Pump ( Flushing Water )

Suppying, installing, testing and commissioing of

Vertical Multistage Booster Pump with c.i. casing,

Bronze impeller, SS Shaft and driven by 415 V AC,

3 phase, 50HZ., motor running at 2900 rpm speed

and shall be supplied with all accessories viz., base

plate, coupling, motor, starter panel, cabling up to

panel, earthing,delivery & header pipes & valves

etc., complete. (Domestic Pressure Pump at Terrace

lvl.)( Grundfos, ITT Lowara, or Eq.Make)Capacity :

15mtr3/hr.2 Nos. pumps ( 2 Working + 1 Stand by

Set)Head : 45 mtr. Booster Tank 100 ltr.

Providing and fixing of electrical instantaneous and

Storage type water Geyser of approved make 6 LTR

CAP. JAQUAR A-O SMITH JAQUAR/ ELENA

Providing and fixing of electrical instantaneous and

Storage type water Geyser of approved make

LTR CAP. JAQUAR A-O SMITH JAQUAR/

BORE WELL:-Supply installation, testing,

commissioning of Bore well submersible pump to be

installed in the tube well of required indicated

capacity and head as per relevant IS for Bore water

lifting with suitable submersible vet type, water

cooled, squirrel case motor conforming to IS

working of 3-phase, 50Hz +/- 3% 415 VAT +/-

10%, AC supply 2900 RPM synchronous speed with

10mtr. copper conductor flat cable from pump to

starter panel with cables and termination ( all

supports clamps pipe fittings mechanical seal,

bearing, bush, strainer, etc. comp., Casing C.I., S.S.

401 CF8M impeller, bronze casing, wearing and bearing 1 SET 8,75,000.00

bush, TC mechanical seal, S.S. bearing, S.S. shaft

with sleeve, S.S. strainer, and M.S. morter along

with water guard, single phase preventor with all

cables of appropriate size control and

instrumentations, switches, testing, and installation

along with testing. The scope shall also include

delivery isolation valve & NRV with PVC piping

(400 dia Drill well @200mm dia MS. heavy class

pipe : BORE WELL) Assume 100 TO 125mtr

depth) ( 20 TO 25 MTR CU. PER HR. OUT PUT

FLOW RATE with potable water quality ) (15 TO

Sr. No. Item Description Total Quantity Unit Rate Amount

HEAT PUMP SYSTEM:-Supply, installation,

testing & commissioning of centralized Hot water

Generation Air to Water Heat Pump , with each unit

500 ltr. Storage tank , ( System Storage Cap. Re.