REPAIR AND CLEANING OF SEWAGE LINE, REPAIR REPLACEMENT OF FLOORING,TILING,OVER HEAD TANK AT MES INSTALLATION AND REPAIR TO AREA DRAINAGE ,DRAIN COVER ETC AT PRC, MES, ASC, DAD, SRC, MH, STN HQ, MDC,TEMPLE LANE AND MES AREA AT RAMGARH CANTT

Amount

Demolition of reinforced cement concrete as in chullah hoods, shelves, cover slab and platform, etc,and removal of rubbish off from site complete all as directed by Engineer-in-Charge.

M&L for precast reinforced cement concrete 1:2:4 ,type B-1 (using 20 mm graded crushed stone aggregate) as in kitchen platform, shelves ,man hole cover slab/ drain cover slab etc. including necessary formwork complete all as specified and directed. Note : Reinforcement will be measured & paid seperately under respective item of BOQ.

M&L for mild steel TMT bars 10 mm dia and over grade Fe -500 , as in reinforcement ,cut to length, bent to shape required, including cranking bending spirally for hooping for column,, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete etc all as specified and directed.

Demolition of brick work of any description and in any position built in cement or cement lime mortar including all quoins, arches, pillars including segregation of serviceable bricks for reuse & removal of rubbish out off from site etc complete all as specified and directed.

M&L for Brick work using Sub class "B" bricks old size , straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 etc complete all as specified & directed.

M&L for Brick work using Sub class "B" bricks old size , straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 etc complete all as specified & directed.

M&L for half Brick thick brick work using Sub class "B" bricks old size , straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 etc complete all as specified & directed.

M&L for Brick work but except bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 etc complete all as specified & directed. Note: old serviceable brick as retrieved from item No. 04 of BOQ here-in before.

Demolition of plain cement concrete(un -reinforced) of any description and in any position not otherwise specifically provided for and removal of rubbish off from site complete all as directed by Engineer-in-Charge.

M&L for plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in levelling course,kerb/ benching/ coping /window cill etc including weathering, slightly rounded or chamfered angle and throating including use & waste of necessary form work etc complete all as specified and directed.

M&L for plain cement concrete 1:2:4 ,type B-1 (using 20 mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and directed

Taking down cement plaster on brick wall or concrete surface etc including raking out joints hacking for key scrubbing down with water etc & removing the debris from the premises upto 500 m from the MOD land complete all as specified and directed

M&L for rendering 15 mm thick on other than fair face of brick masonry/concrete surface etc., in cement mortar 1:4, surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plaster surface of wall and applying two coats of cement base paint over a coat of alkali primer including necessary scaffolding complete all as specified & as directed.

M&L for preparation of newely plastered surfaces of wall and applying three coats of white wash on wall surface complete all as specified & directed.

M&L for 3 mm thick setting coat of cement mortar 1:1 ,trowelled to even and smooth finish over rendering 15 mm thick on fair face brick masonry/concrete surface etc in CM (1:4) surface finished even & smooth using extra cement mixed with using water proffing compound @ 3% by weight of cement complete all as specified and directed.Note:Water proofing compound will be measured and paid seprerately under respective item of "BoQ".

Supply only water proofing compound complete all as specified and directed.

M&L Extra for forming fair finished drain or channel to any inner girth in cement concrete, using extra cement including forms, moulds, etc (inner girth only to be measured) complete all as specified and directed.

Demolition of plain cement concrete(un-reinforced ) in ground floors, terrazo tiles floor & paving not exceeding 15cm thickness (below or above ground level) and removal of rubbish off from site complete all as directed by Engr-in-Charge.

M & L for 75 mm thick plain cement concrete (1:3:6) mix, type C-2 (using 40mm graded crushed stone aggregate ) as in plinth protection, finishing the surfaces even and fair without using extra cement, including 10 mm wide, 75mm deep joints made at 3.00 m in length and filled with bitumen 85/25 grade and sand in the ratio 1:3 including necessary form work , complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base of flooring & mass concrete etc complete all as specified and directed.

M & L for machine pressed coloured chequered cement concrete tiles 25cmX25cm X 22mm thick/ 30 cm x 30 cm x 22 mm thick, set, jointed and pointed in neat cement slurry with grey cement and no pigment ,laid over and including 15mm thick cement screed bed in cement mortar (1:6) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the all rubbish off from the premises complete all as specified and directed.

M & L glazed ceramic coloured tiles of size 300 mm x 450 mm x7mm thick/350 mm x 250 mm x7mm thick ,as in vertical surface such as dado/skirting etc ,set and jointed in neat cement slurry and pointed in colour cement to match the tiles, over & including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M & L non skid coloured ceramic tiles 7 mm to 8 mm thick (sqaure/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc.,laid over and including 15mm thick screed bed in cement mortar (1:6) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.

M & L non skid coloured ceramic tiles 7 mm to 8 mm thick (sqaure/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc.,laid over and including 15mm thick screed bed in cement mortar (1:6) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.

S&F in repair vitreous China urinals, bowl flat back, size of 465 x 355 x 265 mm white (minimum),with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)(back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe etc.complete all as specified and as directed

S&F in repair squatting pan " Orissa Pattern" of size 580 mm X 440 mm white with integral foot rest including cast iron "P" or "S" trap, front or back inlet and making connection to trap & to flushing cistern complete including taking down existing pan & making good disturbed surface complete all as specified & directed.

S&F in repair vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), fixing seat cover including connection to drain (or outgoing pipe, and to flushing pipe & antisyphonage pipe etc with plastic water closet seat closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S & F in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float and handle, PVC flush pipe 32 mm bore & PVC connection 15 mm bore 450 mm long with PTMT nuts and brackets complete set & making good disturbed surface with CM 1:3 complete all as specified and directed.

S&F repair CP jet spray of standard size for EWC along with CP connection pipe and all fittings complete all as specified and directed.

Excavation in trenches in soft & loose soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope/gradient for laying cables/pipes,foundations,laying of cable, shafts, well, cesspits, manholes etc. complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers of not exceeding 25 cm thick after the cables & pipes etc. are laid, jointed & tested and foundations complete all as specified and directed by Engineer-in-Charge.

Removal of surplus excavated soil not exceeding 50 Mtr distance and depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 m above the starting point complete all as specified.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing bweinching for and forming branch channel (1/2 round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required in 150mm internal dia of pipe complete all as specified and as directed.

Demolition and breaking up drain pipes of 150mm dia (SGSW/AC/RCC/PVC) set in cement mortar including bed concrete and removal of debris to low lying area of distance not exceeeding 100 mtr complete all as directed by Engr-in-Charge.

Demolition and breaking up drain pipes of 200 mm dia (SGSW/AC/RCC) set in cement mortar including bed concrete and removal of debris to low lying area of distance not exceeeding 100 mtr complete all as directed by Engr-in-Charge.

M & L for Concrete bed to 150 mm bore drain pipe including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) including necessary shuttering and tested of pipes complete all as specified & as directed

M & L for Concrete bed to 200 mm bore drain pipe including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) including necessary shuttering and tested of pipes complete all as specified & as directed

S & F 150 mm bore Reinforced concrete drain pipes of class NP-2 laid and jointed with collars in trenches and jointed complete all as specified and as directed.

S & F 200 mm bore Reinforced concrete drain pipes of class NP-2 laid and jointed with collars in trenches and jointed complete all as specified and as directed.

Removing blockage of or from water closet(Indian or European type)/WHB /Siink /Floor trap/Gully trap upto first manhole ( Indian or European type ) by removing solid/liquid or mud deposited in the trap or CI pipe line by rodding manually and removing the sludge duly covered in a hygenic manner and making the WC (Indian or European type)/WHB/Siink/Floor trap/Gully trap fully functional complete all as specified and as directed by Engr-in-Charge.

Cleaning of under ground sewage pipe line(cleaning length not exceeding 30 m from man hole or from manhole to septic tank) 100mm dia/bore of pipe by roding and well flushing by using sufficient water and making it clear for easy flow of sewage up to the septic tank including cleaning of manhole sludge, silt etc removing the sludge in low lying area and burying it in pits and replacing manhole cover in position after clwaning complete as directed by Engineer-in-Charge.

Cleaning of under ground sewage pipe line(cleaning length not exceeding 30 m from man hole or from manhole to septic tank) 150mm dia/bore of pipe by roding and well flushing by using sufficient water and making it clear for easy flow of sewage up to the septic tank including cleaning of manhole sludge, silt etc removing the sludge in low lying area and burying it in pits and replacing manhole cover in position after clwaning complete as directed by Engineer-in-Charge.

Cleaning of under ground sewage pipe line(cleaning length not exceeding 30 m from man hole or from manhole to septic tank) 200 mm dia/bore of pipe by roding and well flushing by using sufficient water and making it clear for easy flow of sewage up to the septic tank including cleaning of manhole sludge, silt etc removing the sludge in low lying area and burying it in pits and replacing manhole cover in position after clwaning complete as directed by Engineer-in-Charge.

Cleaning of septic tank of any capacity and any type of material like solid/fluid, mud sludge etc by mechanical motorised suction machine and deposited /removing the sludge etc outside the MoD land shall be conveyed in closed container and also disposed off in the place properly using bleaching powder etc complete all as directed by Engr - in -Charge. Note: Date of cleaning of Septic Tank with location shall be recorded in MB for record purpose.

Taking down eaves gutter, soil west and vent , rain water pipes (any size or pattern) , including all fittings complete all as specified and directed by EIC.

S & F 110 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall including PVC clamp properly with PCC 1:2:4 complete all as specified and directed

S&F in repair for 110 mm bore PVC(SWR) bends any radius complete all as specified and directed.

S&F in repair for 110 mm bore PVC(SWR) bends any radius with access door jointed with rubber ring joints complete all as specified and directed.

S&F for 110 mm bore PVC (SWR) branch piece pipe single, (Single -Y) equal or unequal with access door complete all as specified and directed.

S&F for 110 mm bore PVC (SWR) branch piece pipe single, (Double -Y) equal or unequal complete all as specified and directed.

S&F in repair 110mm bore PVC(SWR) vent Cowl complete all as specified and directd.

S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall/laid in trenches complete all as specified and as directed .

S&F in repair for 75 mm bore PVC(SWR) bends any radius complete all as specified and directed.

S&F in repair 75 mm bore PVC(SWR) vent Cowl complete all as specified and directd.

M&L for cleaning of PVC water storage tank of capacity 1000 ltr on existing bldgs with disconnecting of inlet and outlet pipe ,cleaning with brush/cotton cloth,removing of silt,dirt ,vegetation etc by applying bleaching powder ,lime and washing of water tank and fixed in same position complete all as per specified and directed by Engr-in-charge.

M&L for cleaning of PVC water storage tank of capacity 500 ltr on existing bldgs with disconnecting of inlet and outlet pipe ,cleaning with brush/cotton cloth,removing of silt,dirt ,vegetation etc by applying bleaching powder ,lime and washing of water tank and fixed in same position complete all as per specified and directed by Engr-in-charge.

Dismantling stone slabs of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar, and removal of debries from site complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20mm -25 mm thick of size not less than 575 mm X 575 mm, over laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing & polishing over & including 20 mm thick screed bed in CM (1:6) complete all as specifed & directed.

M&L for machine cut kota stone slab in skirtings,riser of steps ,dado & pillar 10 to 12 mm thick laid and jointed with grey cement slurry pointed with cloured cement to match the shade of the slab including grinding rubbing & polishing over 10 mm thick backing coat in CM (1:4) etc complete all as specifed & directed.

Grinding & Polishing of existing kota stone/ Terrazo flooring, etc including treating the surface with beeswax polish complete all as directed by Engr-in-charge

M&L for 10mm thick vitrified ceramic tiles( Dark shade) polished area of each tiles not exceeding 0.36 sqm as in floors,set & jointed in neat cement slurry and pointed in coloured cement to match, over & including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

Material & Laying/fixing/erection vertically for Granite slab (of any type) work (table rubbed and polished) of any shade 18 to 20mm thick in cooking platform, steps, window cills, etc over and including 15mm thick cement screed base in CM 1:4 laid and jointed with white cement slurry mixed with admixture of pigment to match the shade of the slab including rounding of slab including demolition of old slab complete all as specified and directed.

M&L for rendering 15 mm thick on fair face brick masonry/concrete surface etc in CM (1:6) surface finished even & smooth using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying 2.0 mm thick wall care putty in two layers to make entire surface free from undulations complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

M & L for 40 mm thick PCC (1:2:4), type B - 1 (using 20 mm graded crushed stone aggregate) as in floor finishing,even & smooth using extra cement including fixing of glass strip complete all as specified and directed. Note: Glass Strip shall be measured and paid separately.

Supply only 38mm wide glass dividing strips, 3mm thick complete all as specified and directed.

M&L for plain cement concrete 1:4:8 ,type D-2 (using 40 mm graded crushed stone aggregate) as in sub base of flooring, foundations,filling & mass concrete for fencing posts, foundation of pole ,struts & stay assembly etc complete all as specified and directed.

M&L for 60 mm thick factory made machine pressed pre-cast concrete coloured interlocking paver block of approved shade (Red & yellow min in two colour), laid in design & pattern as in footpath, light traffic parking etc, made by table vibratory method using PU mould of any shape and size conforming to IS-15658-2006 of M-35 grade laid over & including 50mm thick compacted bed over fine sand, compacting and proper embedding/ laying by vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for 100 mm thick plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in sub base of flooring & mass concrete etc complete all as specified and directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frames) of any description not exceeding 1.5 Sqm each,including builders hardware etc & making good disturbed surface of wall with CM 1:3 complete all as specified and directed

Taking down chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frames) including builders hardware etc & making good disturbed surface of wall with CM 1:3 complete all as specified and directed

Taking down shutters of any description not exceeding 1.0 Sq m each and refixing in the same opening /other opening as directed by Engineer-in-Charge after necessary easing, adjustment etc., complete all as specified and directed by Engineer-in-Charge .

Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.0 Sq m each and refixing in the same opening /other opening as directed by Engineer-in-Charge after necessary easing, adjustment etc., complete all as specified and directed by Engineer-in-Charge .

S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tubes suppyling & fixing in opening as per specification & drawing complete all as spcefied and directed by Engineer-in-Charge.

S & F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. mild steel framed shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail &bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS framed welded/sealed to stiles & rails with suitable PVC sheet beading & joined together with solvent cement complete all as fixing in the frame at site as per specification and drawing complete all as specified and as directed.

S & F for steel windows or ventilators,top hung type with glazing/glazed bars complete including prepartion of new or previously untreated steel surface of any description , not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified & directed.

M & L for 3mm thick plain sheet glass ordinary quality and glazing with oil putty not exceeding 0.50 Sqm in each pane,complete all as specified and as directed by Engineer-in-Charge .

M&L for framed work such as grills,gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railing; framework of water tanks and similar work conforming to Fe 290- Gde E -165 & for portions framed and hung as gates, including pintle hinges, stops,hand-made sliding bolts, etc.complete all as specified and as directed

M&L for prepartion of new or previously untreated steel surface of any description , not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

M&L for prepartion of old painted of steel surface of any description , not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint (ordinary tint) any colour on old steel painted surface complete all as specified & directed.

M&L for prepartion of new or previously untreated wooden surface of any description , not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

M&L for preparation of old painted of wooden surface of any description , not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint (ordinary tint) any colour on old wooden painted surface complete all as specified & directed.

S & F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed complete all as specified & directed.

S & F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long complete all as specified & directed.

S&F 300 mm long aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified & directed.

S&F mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

S & F in repair for aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete etc all as specified & directed.

S & F 150 mm (overall length of cover plate) floor door stopper with rubber shoes aluminium alloy body and tongue, anodised ,with hard drawn steel spring,fixed in floor complete all as specified and directed.

S & F Aluminium anodised handles of extruded section and fixed 150 mm long complete all as specified & directed.

M & L for 10mm thick rendering in cement mortar 1:4 on brick or concrete surface complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregates) as in kerb/benching/copings including weathering, slightly rounded or chamfered angle and throating including use & waste of necessary form work etc complete all as specified and directed

S & F in repair vitreous China wash basin, any colour, flat back size 580 mm X 450 mm including 32mm brass chromium plated waste coupling , 32 mm bore PVC waste pipe, chromium plated Grating including cutting for & pinning in ends of bracket or errecting bracket & PCC 1:2:4 ,type B-1(using 20 mm graded crushed stone aggregate) for embedding brackets & making good disturbed surface with CM 1:3 complete all as specified and directed.

M&L for cleaning of PVC water storage tank of capacity 1000 ltr on existing bldgs with disconnecting of inlet and outlet pipe ,cleaning with brush/cotton cloth,removing of silt,dirt ,vegetation etc by applying bleaching powder ,lime and washing of water tank and re-connecting /re-fixing in same position complete all as per specified and directed by Engr-in-charge.

M&L for cleaning of PVC water storage tank of capacity 500 ltr on existing bldgs with disconnecting of inlet and outlet pipe ,cleaning with brush/cotton cloth,removing of silt,dirt ,vegetation etc by applying bleaching powder ,lime and washing of water tank and re-connecting /re-fixing in same position complete all as per specified and directed by Engr-in-charge.

S&F rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed type), triple layer construction, ISI marked, hoisted and fixed in position including 20 mm bore GI nipple and 25 mm bore ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) including taking down of existing tank complete all as specified and directed.

S&F rotational moulded polythene water storage tank of capacity 1000 ltrs (Cylindrical/vertical with closed type), triple layer construction, ISI marked, hoisted and fixed in position including 20 mm bore GI nipple and 25 mm bore ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) including taking down of existing tank complete all as specified and directed.

Taking up or down steel tubing and connections of 15 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed.

Taking up or down steel tubing and connections of 20 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed.

Taking up or down steel tubing and connections of 25 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 15 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors including cutting chases for brick walls and making good the surface in cement mortar 1:3 complete all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 20 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors including cutting chases for brick walls and making good the surface in cement mortar 1:3 complete all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 25 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors including cutting chases for brick walls and making good the surface in cement mortar 1:3 complete all as specified & directed.

Refixing for 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)including all fitting as socket, elbow, nipple,union etc complete all as specified and directed .Note :G I Pipe obtained from item No.103 here-in -before.

Refixing for 20 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)including all fitting as socket, elbow, nipple,union etc complete all as specified and directed .Note :G I Pipe obtained from item No.104 here-in -before.

Refixing for 25 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)including all fitting as socket, elbow, nipple,union etc complete all as specified and directed .Note :G I Pipe obtained from item No.105 here-in -before.

S & F in repair 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F in repair 15 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair stop valve/cock 15mm bore chromium plated fancy type with long shank fancy type cast copper alloy, screwed down high pressure with crutch or butterfly handlt, screwed both ends for iron pipe or for brass ferrule fixed in wall etc complete all as specified and directed (Make- Shakti Cat Part No API-6106 or equivalent Cat Part No. of any make as per appendix 'A' to P.S as approved by GE).

S & F in repair pillar taps long body chromium plated, cast copper alloy with capstan head, chromium plated, screwed down with or without lettered 'Hot' or 'Cold' with long screw shanks and fly nuts, screwed for iron pipe and fixed for 15 mm bore complete all as specified & directed (Make- Shakti Cat Part No API-6108 or equivalent Cat Part No. of any make as per appendix 'A' to P.S as approved by GE).

S&F in repair stop valve/cock 15mm bore chromium plated fancy type with long shank fancy type cast copper alloy, screwed down high pressure, screwed both ends for iron pipe or for brass ferrule fixed concealed in wall etc complete all as specified and directed. (Make- Shakti Cat Part No API-6109 or equivalent Cat Part No. of any make as per appendix 'A' to P.S as approved by GE).

S & F 15mm bore bib taps ( weight not less than 400 gm) cast copper alloy, chromium plated fancy type(half/ quarter turn, with mini capstain headhandle screwed down, screwed for iron pipe and fixed to 15mm bore ipe after taking down of lod bib tap complete all as specified and directed (Make- Shakti Cat Part No API-6103 or equivalent Cat Part No. of any make as per appendix 'A' to P.S as approved by GE).

S & F in repair stainless steel kitchen sinks with drainage board for kitchen made of stainless steel 1.00 mm thick sheet with plugs, washers & waste coupling and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 1325 mm X 460 mm bowl size 410 mm X 330 mm X 160 mm including 40 mm bore PVC flexible waste/flush pipe 800mm long with socket fixed with sink brass waste coupling complete all as specified and directed.

S & F in repair waste fittings, brass, chromium plated for glazed ware sinks, basins etc. with long screwed shanks and flynuts, flange end bedded in red lead cement and other end fixed waste coupling 40mm and waste pipe 40mm dia for sink etc complete all as specified and directed.

S & F in repair 15mm did Sink tap cast copper ally chromium plated, fancy type (Half/Quarter turn with Swan neck) with mini capstan heads chromium plated screwed down high pressure with or without letered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed. ( Make -Shakti Cat Part No API-6107 or Equivalent Cat Part No of any approved Make-as per Appendix 'A' to PS)

S&F in repair for PVC connection 15 mm dia size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair towel rail brass chromium plated towel rail , 20 mm dia ,D-type 600 mm long between flanges fixed with and including chromium plated brass screw & wooden /plastic cleats complete set all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf, 15cm wide with chromium plated bracket guard and railing 60cm long complete set complete all as specified and directed.

S&F in repair chromium plated (CP) soap tray /dish of size 160 mm x 160 mm x 90mm fixed with brass screws complete all as specified and directed.

S&F in repairs mild steel Peg set fancy type of six,hat and coat hooks, solid body, not less than 300 mm long complete all as specified and directed.

S&F in repair for 110 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor etc.,complete all as specified and directed.

S&F in repair for 75 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor etc., complete all as specified and directed.

S&F in repair PVC (SWR) junction single (single-T) equal or unequal 110mm bore provided with access door complete all as specified & directed.

S&F in repair PVC (SWR) junction single (single-T) equal or unequal 75 mm bore provided with access door complete all as specified & directed.

S & F in repair for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement with chromium plated grating with or without hole complete all as specified and directed.

S & F in repair Grating doom 100mm dia of PTMT (minimum weight 25gms) complete all as specified and directed by Engineer-in- Charge.

M/S BIJAY KUMAR SINGH (BID ID -3338412)

Modernage Constructions Pvt. Ltd. (BID ID -3336011)

M/S Balaji Construction & Company (BID ID -3339067)

upadhyay engineers and consultant (BID ID -3337178)