MAINTENANCE AND RENOVATION OF AUDITORIUM AT VEER MADHO SINGH BHANDARI TECHNICAL UNIVERSITY, DEHRADUN, UTTARAKHAND

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead :

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

supply and filling of soil including Transported the soil by construction Embankment of floor filling

P:C:C 1 :4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :M25 grade concrete

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.fe 500 d or more

Application: Wall Acoustic on Stage wall :Supply and Installation of Acoustic Panneling with 20mm Wood Wool board ( size : 1200mmx600mm), Density: 400 Kg/M3, as per IS 3308, Edge : Square, NRC: 0.89 Excellent Noise Absorption.(As per India Radio AIR), A government Test house. Thermal Conductivity: 0.045 w/m 2K. 40 mm GI Section for Base frame. 50mm Glass wool , Top Layer of Non Woven Felt ( Black) , for Finishing.

Providing and fixing of 95x20 mm second class Teak wood klin seasoned planks with tongue & groove joints. Teak wood planks to be of minimum length 450mm. The Teak wood planks to be fixed over a layer of 12 mm commercial ply of approved make fixed to Sal wood frame work of 50 x50 mm and 50x50 mm at 600 mm centre to centre (HxV). The Sal wood shall be kiln seasoned and chemically treated.The framework to be jointed with mathani cut method. The framework to be filled with 50 mm thick thermal bonded fiberglass of density 24kg/cum. The stage floor to be PU polished with use of orbital sanders to make floor even before polishing.

Replacement of Fabric on wall & Ceiling in Multiple Color with Repair of Acoustic.

LED Wall Covering for below Side

waterproofing treatment work on roof etc. with 5 layers PU coating Treatment including 50 GSM giofebric cloth including cleaning the surface etc all complete

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with acrlylic distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Providing and fixing PTMT stop cock of approved quality and colour

Providing and fixing PTMT bib cock of approved quality and colour.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Modular Wooden Table for Stage ( Size : 5 Ft x 30 Inch)

Executive Chair for Stage

SITC of Wireless Dual Handheld Microphone : Includes SVX88 Dual Diversity Receiver, and (2) PG58 Handheld Microphone Transmitters.Shure / SVX 288/PG 58

SITC of Wireless Headworn Microphone : Includes SVX4 Diversity Receiver, and SVX1 Bodypack Transmitter with PGA31 Headset Microphone. Shure /SVX 14IN/PGA 31

Servicing of Audio Mixer ( Soundcraft /FX16II)

Servicing of BLU 100 + fresh Programming

Repair and Serviving of Line Array Speakers ( RCF / HDL 20 ) Including Painting of Jali.

SITC of Digital Player : Built-in MP3 recorder player with LCD display supplied with remote control and with built-in facility of USB, SD, MMC card & Bluetooth. Ahuja / ADP 30 R

Supply of Wooden Podium with University Logo.

SITC of Gooseneck Microphone Shure / CVG 18RS/ CVD-B

SITC of Corded Microphone with 10 Mtr Cable.Behringer / XM 1800

SITC of Subwoofer : Active High Power Subwoofer, 2500 Watt Peak, 18" Woofer, 4.0" voice coil vented woofer, 30 Hz - 120 Hz frequency response, 136 dB max SPL. RCF /SUB 8004-AS

Supply of Microphone Connector Box

Servicing of Amplifier for Left, Right, Centre & Surround Speaker.

SITC of 54X3W LED par light complete with 8-channel DMX 512, high brightness mixing color evenly, stable performance with sound active auto, DMX, and power and DMX loop in and out option, undergone through 7 Tank chemical treatement to keep them rust free and, duly powder coated in black matt texture finish and technical specifications as below.TDH • Lamp - 54 X 3W RGB LED (18R+18G+18B) • Power consumpsion - 162W • Power supply - 230/240V AC • Power cable - 3 core 1.5 sq. mm. copper PVC insulated • Channels - 8 Channel DMX-512 • Beam angle - 25° (15°, 45° optional) • Control mode - DMX, and Manual.

SITC of COB PAR 100W is an extremely powerful, technically very sophisticated headlamp with a warm white 100 watt COB LED. With its broad dispersion and extremely high luminosity, it ensures outstanding photographs. More than 3 DMX channels let you create strobe effects or set the dimmer from 0 - 100%. In particular, the seamless fine adjustment make the COB PAR 100W interesting. Directly on the on-board menu, the luminosity can be adjusted seamlessly. So you can adjust the brightness color yourself. With only 100 watts of power and only 2.7kg in weight, the COB PAR 100W is economical, compact and powerful. At the high LED output of 100 watts, it generates very bright light in pleasant warm white.TDH

SITC of High quality 300W LED Profile Spot Light used as a Spot Light and high-contrast gobo projection Light, Other Technical specifications as below:TDH • Lamp Power : 200W COB LED,• Power Supply : AC 110-230V, 50Hz.• Colour Temperature : 3200K •CRI :>90 • Focus : Manual Focus•Beam Angle: 19° • Control : DMX, Autorun and Master/Slave • Shutter arrangements : Beam shapping shutter or plastic gobo projection assembly.• Lux Level - 20,378 lux @ 2 Mtr with 19°,3200K• Dimming : 0 - 100% dimming• Protection Rating : IP20 • Dimentions : W 300 x L 700 x H 310mm.

SITC of LED 2x2 blinder matrix Light used in Entertainment applications, Night club, Fashion shows, Film, Band performances, Discotheque, Stage performance , TV studio and large-scale show etc fixture with advanced COB LED technology with below specifications:-TDH • Power Consumption: 400W • Power Supply: 240 AC, 50- 60Hz • Light Color: Single color warm white / Cool Light • Channel: 4/8 channel • Lifetime: Over 50,000 hours • Beam Angle: 30° • Control mode: DMX512,Master/Slave,Auto Run,Sound active. • Dimmer: 0 -100% linearly adjustable • LUX: 8200 LUX @ 2m • IP Grade: IP20

SITC of MCB Box 24way MCB box made out from 16SWG MS sheet dully powder coated paint with 25 amp single phase MCB & 3 ø 4 pole 100Amp IsolatorTDH

SITC of Digital Lighting Console with 512 DMX channelsTDH • 512 DMX Channels. • 1000 scenes memories. • 12 hot keys for scene recall. • 2 cross fade for scene change • save 512 group of chasers and each chaser contains 256 steps • Audio control. • DMX connection: XLR 5-pin • Weight: 2.3kg • Dimension: 482(W)x55(H)x176(D)mm

SITC of 6 Channel Splitter TDH

Supply & laying of PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 3cx1.5 sq mm including terminations etc complete as required.

Repair of front & rear Curtain : Curtain machine with pulley, , Gear box,1 HP(Godrej/Crompton) Flange type motor, 2 Nos. Air Breaker (Deihl) and powder coated box for air breaker . 2 Nos.15 amps. Micro switches (Deihl) for auto stop 3 no’s push buttons with 2 mm thick CRC Sheet ,3 mm rope wire etc.TDH

Stage light bar machinsum machine 3 phase 2 hp motor and gare box Necessary pulley, guide pulleys* GI wire rope with winding drum* Specially designed compact gear box 2hp motor* Upper and lower limit controlle TDH

WINGS :-Providing and fixing cloth wings made out of black glazed cotton cloth fixed on overhead pivote track with single sided 6mm ply. TDH including "C" clamp with safety locking chain, duly powder coated in black matt texture finish and technical specifications as below. • Finish - Pretreated and black epoxy polyester powder • Safe working load – 150Kg .Safety bond with lock clip (Safe Working Load 100Kgs ) to be fixed around the grid to avoid fall of the material in case if the "C" clamp is not locked properly including all accessories etc complete as required.

Supply of Remote Control Option for Front & Rear Curtain .

Supply, Installation, Testing and Commissioning of Blue Star Ductable AC New Compressor, Capacity 8.5 TR

SITC ofContactor 3 Phase 40 Amp, Capacity 8.5 TR

Gas Refilling In 8.5 TR

Gas Refilling IN 5.5 TR

Nitrogen Pressure Testing and Commissioning of filling etc complete

Labour and Servicing of Indoor and Outdoor Units.

SITC of Outdoor Unit 8.5 TR Condensor