Kerala

Active

Works

Civil Works - Buildings

DEPOSIT-Providing amenities for newly recruited firewomen staff at Kadappakkada Fire station office-Work-General Civil Work-1

Public Works Department

Kollam, Kerala

Amount: ₹1.4 LCloses: 19 Oct 202612 Oct 20265d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published3 Oct 2026
Closes19 Oct 202612 Oct 2026
Bid Opening22 Oct 202615 Oct 2026

Corrigenda

Corrigendum

1 updatesLatest on 13 Oct 2026Submission Ends:12 Oct 202619 Oct 2026

Date changes

Download Ends12 Oct 202619 Oct 2026Submission Ends12 Oct 202619 Oct 2026Bid Opening15 Oct 202622 Oct 2026

Tender Value

₹1.4 L

EMD Value

₹3,598

Closing Date

19 Oct 2026, 5:00 pm5d left

Tender Inviting Organisation

Name

Assistant Executive Engineer

Address

Pwd Buildings subdivision Kollam

Work Description

DEPOSIT-Providing amenities for newly recruited firewomen staff at Kadappakkada Fire station office-Work-General Civil Work-1

Tender Information

Tender ID

2026_PWD_876012_1

Reference Number

ET-42/AEE/KLM/2026-2027

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Period of Work

180 days

Location

Kollam

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

9 documents required · 9 mandatory

Fee/PreQual/Technical/Finance

RequiredBid document (.pdf)

RequiredAffidavit (.pdf)

RequiredPreliminary Agreement (.pdf)

RequiredEpayment (.pdf)

RequiredForm of Tender (.pdf)

RequiredIntegrity (.pdf)

RequiredLicense (.pdf)

RequiredGST (.pdf)

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹555

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹3,598

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

19 Oct 2026

Published

3 Oct 2026

Bid Opening

22 Oct 2026

Download Starts

3 Oct 2026

Download Ends

19 Oct 2026

Submission Starts

3 Oct 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (32 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Detailed Estimate
1.001	15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below	2	each	-	-
1.002	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	1.04	cum	-	-
1.003	26.32.3:Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).50 mm average thickness in 3 layers.	1.86	sqm	-	-
1.004	50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete	1.34	cum	-	-
1.005	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	8.36	sqm	-	-
1.006	11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.	8.25	sqm	-	-
1.007	OD57925/2026-2027:Providing and laying vitrified floor tiles(Matt finish) in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand) etc., complete.Size of Tile 600 x 600 mm. Details of cost for 1 sqm.	2.16	sqm	-	-
1.008	OD57924/2026-2027:Providing and laying Vitrified Wall tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm etc complete.(extra payment to be given for pointing)	11.91	sqm	-	-
1.009	17.2.1:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid	1	each	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.05 MB

Work Item Documents

bidm.pdf

Tender Documents • 1.67 MB

affidavit.pdf

Corrigendum Documents

date.pdf

PDF • 0.62 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Detailed Estimate
1.001	15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below	2	each	-	-
1.002	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	1.04	cum	-	-
1.003	26.32.3:Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).50 mm average thickness in 3 layers.	1.86	sqm	-	-
1.004	50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete	1.34	cum	-	-
1.005	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	8.36	sqm	-	-
1.006	11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.	8.25	sqm	-	-
1.007	OD57925/2026-2027:Providing and laying vitrified floor tiles(Matt finish) in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand) etc., complete.Size of Tile 600 x 600 mm. Details of cost for 1 sqm.	2.16	sqm	-	-
1.008	OD57924/2026-2027:Providing and laying Vitrified Wall tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm etc complete.(extra payment to be given for pointing)	11.91	sqm	-	-
1.009	17.2.1:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid	1	each	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Detailed Estimate

1.001

15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

each

1.002

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

1.04

cum

1.003

26.32.3:Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).50 mm average thickness in 3 layers.

1.86

sqm

1.004

50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

1.34

cum

1.005

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

8.36

sqm

1.006

11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

8.25

sqm

1.007

OD57925/2026-2027:Providing and laying vitrified floor tiles(Matt finish) in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand) etc., complete.Size of Tile 600 x 600 mm. Details of cost for 1 sqm.

2.16

sqm

1.008

OD57924/2026-2027:Providing and laying Vitrified Wall tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm etc complete.(extra payment to be given for pointing)

11.91

sqm

1.009

17.2.1:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid

each