Combined Package for, Work A Creating 33kV ref. by providing 1x20MVA, 110/33 11kV Transformer at 110/11kV Yadwad SS Gokak tq, Belagavi Dt. Work B Creating 33kV ref. at 220kV Esale SS by prov 1x20MVA, 110/33 11kV Transformer in Sirsi Tq, Uttara Kannada Dt. Work C Providing addl. 1x20MVA, 110/33 11kV Transformer at 110kV Kiruvatti SS in Yallapura Tq, Uttara Kannada Dt. Work D Creating 33kV ref. by providing 1x20MVA, 110/33 11kV Transformer at 110kV Bidi SS in Khanapur Tq, Belagavi Dt, on TTK Basis

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

TECHNO - COMMERCIAL SHEETS

NOTE* For detailed scope of the work please refer Bid Documents.

BIDDERS TO READ CAREFULLY

THE FOLLOWING DOCUMENTS [DULY SIGNED BY AUTHORISED PERSON, WHEREVER NECESSARY] ARE TO BE UPLOADED AND BANK GUARANTEE/INSURANCE SURETY BOND TOWARDS EMD OVER AND ABOVE RS.1.00LAKH AS PER ANNEXURE-II OF THE BID DOCUMENT SHALL BE SENT IN ORIGINAL TO CHIEF ENGINEER ELECTY., CGM(Tech), KPTCL, BENGALURU SO AS TO REACH THIS OFFICE AFTER THE LAST DATE OF SUBMISSION OF BID AND ON OR BEFORE THE DATE & TIME NOTIFIED FOR OPENING OF TECHNO COMMERCIAL BIDS, FAILING WHICH THE BID WILL NOT BE OPENED. 1) NO DEVIATION CERTIFICATE (SCHEDULE-16). 2) EMD/BID SECURITY AS DETAILED IN CLAUSE NO. 13 of ITT. 3) BANK GUARANTEE issued either by a Nationalized/Scheduled Bank OR INSURANCE SURETY BOND issued by Insurance Company authorized by Insurance Regulatory and Development Authority of India (IRDA) TOWARDS BALANCE EMD/BID SECURITY. (For the balance EMD above Rs. 1Lakh) (SCHEDULE-17) - as detailed in Clause No. 13 of ITT-The Bidder shall scan the Bank Guarantee/INSURANCE SURETY BOND towards EMD and upload the same in the prescribed format in the slot specified for “EMD and Tender Fee Payments” in the KPP portal to enable the owner for verification of EMD BG/ISB at the time of opening of Techno Commercial Bid, failing which the offer will be rejected. 4) LETTER OF UNDERTAKING (SCHEDULE-18). 5) CONSORTIUM AGREEMENT (IF APPLICABLE-SCHEDULE-19) 6) POWER OF ATTORNEY (SCHEDULE- 20). 7) ANY OTHER AGREEMENTS /UNDERTAKINGS/SELF DECLARATIONS SPECIFIED IN THE TENDER.

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

BID PROPOSAL SHEET

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bidder's Name & Address alongwith GSTIN no. :

Bid Proposal Reference :

Person to be contacted :

E-Mail Address:

The Chief General Manager(Tech)

Corporate Office, KPTCL,

Indhana Bhavan, Bangalore - 560 009.

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

a) * We have submitted bid as individual Bidder. (Indicate Name of the Individual Bidder)

b) * We have submitted bid in Consortium with the following Bidders. (Key in Consortium)

Name of the Consortium Partner Scope / Participation of each Consortium Partner

(* Fill-up whichever is applicable)

1 We, the undersigned Bidder, having read and examined in detail the specifications and all the Bidding documents of the said work and hereby propose to design, manufacture/fabricate, shop test, supply on FOR site basis, and carry out the erection, testing and commissioning including civil, structural and architectural works for

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

2 PRICES AND VALIDITY :

2.1 We declare that the Prices stated in our Proposal are in accordance with subject Bid Documents (including Clause No.40 of "Conditions of Contract (CC)" & Clause No.12 of Instruction to Tenderers (ITT) of Bid Documents. We further declare that all Ex-works price/CIF components of Spares, Maintenance and Testing Equipments and other charges viz., Freight and Insurance, Type Test charges and other charges stated in our proposal shall be as per the Tender conditions. All the Price and other terms and conditions of this Proposal are valid during the Performance of the Contract.

2.2 All Duties, such as Custom Duties on imports, Levies, Surcharge/Cess etc., if any applicable on the transaction excluding GST are included in the Bid Price and shall be to Our account and the Owner is not having any liability whatsoever on this account, whatever may be the contrary elsewhere in the Bid documents. However the component of Duties included in the Bid Price are separately indicated in Schedule - 2 for TDS purpose. We further confirm that our Bid Prices as quoted in Schedule-I, include all import Duties and levies including Licence fees lawfully payable by us on imported items and all other Duties and Levies applicable on Bought-out Components, Materials, Equipment and other items and confirm that any such Duties and Levies additionally payable shall be to our account. We further confirm that, no Sales Tax in any form shall be payable by Owner either for Bought-out items which are despatched by our Sub-Suppliers directly to the Project Site or for items Supplied directly by us. We confirm that, the Prices quoted by us are excluding GST.

2.3 We declare that we have noted and considered Clause No.39 of Conditions of Contract (CC ), Clause No. 11.11 of Instruction to Tenderers(ITT) of Bid Documents regarding Taxes and Duties and quoted our Prices accordingly. We further agree for TDS as per Statutory stipulations.

2.4 The Bid Prices, the Price components of the various items in our Scope of Supply, Erection including Testing & Commisisoning, Civil and Mandatory spares is quoted in Itemwise Financial Bid in KPP Portal for this proposal..

3 CONSTRUCTION OF THE CONTRACT : We, declare that we are making the Offer on the basis of Single Contract for the entire Scope of the Package in accordance with Clause No.26.2 of Instruction to Tenderers (ITT) of Bid Document.

4 We having studied Clause No.39 of Conditions of Contract (CC ), Clause No. 11.11 of Instruction to Tenderers(ITT) of Bid Documents , relating to Tax and we hereby, declare that if any income-tax, surcharge on income tax or any other corporate tax is attracted under the law, we agree to pay the same.

5 Bid Security/ EMD : We have enclosed a Bid Security through e-Payment mode for a sum of Rs.1.00Lakh and remaining amount of Rs24.30Lakhs ( above Rs.1 Lakh) in the form of Insurance Surety Bond (ISB) issued by Insurance Company authorized by Insurance Regulatory and Development Authority of India (IRDA) OR in the form of Bank Guarantee in original valid for a period of 225 days from last date of bid submission and liable to be forfeited in accordance with Bid Documents. (Mode of Payment towards EMD is as detailed in CLAUSE NO. 13 of ITT & Clause No. 5 of NIT)

We have also ensured that the above Bid Guarantee furnished by us is in line with the Bid Documents and complete in respect of following :

1. Value of Non judicial Stamp Paper purchased in the name of executing Bank is as per Stamp Act.

2. Power of Attorney Number and Date as well as Signature and Full Name and Designation of Executant along with Bank's Stamp are there.

3. Signature, Full Name, Designation and address of Witness are there.

4. Completed Mailing address of the Head Office of the Bank is indicated.

6.1 We declare that the Works shall be performed strictly in accordance with the Specifications and Documents except for the variations and Deviations, all of which have been detailed out exhaustively in the following Schedules, irrespective of whatever has been stated to the contrary anywhere else in our Proposal.

a Commercial Deviations Schedule Schedule - 5

b Technical Deviations Schedule Schedule - 6

6.2 We further confirm that Specified Stipulation of following Clauses are acceptable to us and No Deviation / Exceptions are taken on any account whatsoever in the following Clauses.

a. Terms of payment Clause No. 37 of Section-5,Conditions of Contract (CC) and Clause No.8 of Special Conditions of Contrac (SCC)

b. EMD/Bid Security Clause No. 6, Section :1, Invitation for Tenders (IFT) and Clause No. 13, Section :2, Instruction to Tenderer (ITT)

c. Contract Performance Guarantee Clause No. 29 of Section:2, Instruction to Tenderers (ITT).

d. Penalty for delay Clause No. 41 of Section-5 : Conditions of Contract (CC).

e. Price Basis/ Price adjustment Clause No. 40 of Section-5 :Conditions of Contract (CC).

f. Defects Liability Period/Guarantee Clause No. 10 of Section-5 Special Conditions of Contract (SCC)

g. Work Schedule Clause No.17 of Section:5 Conditions of Contract (CC)

h. Taxes and Duties Clause No. 11.11 of Section-2: Instruction to Tenderers (ITT).

Further, we agree that additional conditions, if any, found in the Proposal Documents other than those stated in Deviation Schedules, save that pertaining to any rebates offered, shall not be given effect to.

7 PERFORMANCE GUARANTEE ; We declare that the ratings and performance figures of the equipment to be supplied and erected by us are guaranteed. The Guaranteed particulas of different equiment in our Scope are enclosed in Data Requirement Sheets.

8 BID PRICING : We further, declare that the Prices stated in our Proposal are in accordance with your ITT & SCC & all other relevant clauses of Bid Documents.

9 PRICE ADJUSTMENT : We declare that the Prices quoted by us are in accordance Clause No. 40 of Section-5 :Conditions of Contract (CC)

10 SPECIAL TOOLS AND TACKLES : We have given a list of Special Tools and Tackles in Schedule - 7 and Prices thereof are included in our lumpsum Bid Price. We further agree that any items of Special Tools and Tackles, though not included in the aforesaid list, but required for effective Erection, Testing, Commissioning & Operation of the Equipments of Substations & Transmission lines shall also be furnished by us, at no extra cost to you.

11 ADDITIONAL INFORMATION : In addition to the information called for in these Proposal Sheets, we have included with this Proposal, additional information as listed in Schedule - 8. We further confirm that such additional information does not imply any additional deviation beyond those covered in Schedule - 5 & 6 and in case of any contraction between these additional information and other provisions of Bid, the later will prevail.

12 QUALIFICATION DATA : We confirm having submitted the Qualification Data, as required by you in your Bid Documents in e-Procurement Portal along with this Proposal. Further we have filled in the information for Qualification Requirements in Schedule 9. In case you require any further information in this regard, We agree to furnish the same in time.

13 WORK SCHEDULE : If this Proposal is accepted by you, we agree to submit Engineering Data, Provide Services and complete the entire Work from time to time, in accordance with Schedules indicated in the Proposal. We fully understand that the Time Schedule stipulated in this Proposal is the essence of the Contract, if awarded. The completion schedule of the various Major Key Phases of the Work is indicated in Schedule - 11.

14 CONTRACT PERFORMANCE GUARANTEE ; We further agree that if our Proposal is accepted, we shall provide an irrecoverable Contract Performance Guarantee, of value equivalent to Five percent (5%) of the Amount Put to Tender (Excluding GST) plus additional security for unbalanced tenders in accordance with Clause 29 of Instructions To Tenderers (ITT) of the tender valid up to the end of ninety (90) days after the end of the Contract Guarantee Period mandatorily in the form of Insurance Surety Bonds (ISBs) issued by Insurance Company authorized by Insurance Regulatory and Development Authority of India (IRDA) (OR) in the form of electronic Bank Guarantee (e-BG) from the Banks which are integrated with NeSL in the form attached as Annexure-III (Section 4: Formats of Annexures) in your favour in accordance with Clause 25.5 of ITT and Clause 43 of the CC (Conditions of Contract), as per the format given in Section 4 and enter into a formal agreement with you within Thirty (30) days from the date of issue of Letter of Intent to Award the Contract.

15 We, the partners of the Consortium whose Signatures are appended below, shall be liable jointly and severally for the execution of the Contract(s), in the event of Award, in accordance with the terms of Contract(s). The Lead Partner for this Bid - M/s .................................................................................... on behalf of the Consortium, is submitting the Bid. The Power of Attorney in favour of M/s .......................................................................................is enclosed.

16 BID PRICE : We declare that our lumpsum Price for the entire scope of work specified in the specifications and documents, shall be as indicated in Schedule - 1.

17 CHECK LIST : We have included a Checklist duly filled in Schedule 22

18 We, hereby, declare that only the Persons or Firms interested in this Proposal are named herein as Principals and that no other Persons are interested in the Proposal or in the Contract to be entered into, if we are awarded the Contract, and that this proposal is made without any connection with any other Person, Firm or Party likewise submitting a Proposal and that this Proposal is in all respect for and in good faith, without collusion or fraud.

19 We declare, in case our bid is accepted, that until a formal Contract is prepared & executed, this bid together with your written letter of acceptance thereof and your notification of award /Letter of Intent to Award the Contract shall constitute a binding contract between us. We further understand that you are not bound to accept the lowest or any bid you may receive.

Thanking you, we remain,

Yours faithfully,

Place Printed Name

Business Address Country of Incorporation (State or Province to be indicated)

Name and Address Principal Officer

Karnataka Power Transmission Corporation Limited

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

We declare that in terms of Clause No. 11 of ITT, Bid documents, the following are our lumpsum price in Rupees for the entire scope of work as specified in the Specifications and Documents.( Inclusive of all Taxes (Excluding GST) & Duties).

Total Lumpsum Price : ( In Figures) Note: Fill as "YES" against this column in case Prices are indicated in the Item-Wise Bid Financial Offer in figures

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 2 (1 of 2)-SUMMARY OF PRICE COMPONENTS

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Summary of Price Components

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

Summary price components for identified in accompanying specifications

( Name of the Work) as per the scope identified in accompanying specifications.

Sl no Description Amount in Rs. (Fill as "YES" against the above Price columns in case Prices are indicated in the Price templates)

A Material / Equipment Price (including Packing & Forwarding charges) in the Scope of the Contractor

i) Ex-works including all taxes & duties [As per schedules -

ii) Freight and Insurance Charges (Not Applicable) [As per schedules - 3A(i) for Station & 3B(i) for Line]

iii) Total FOR site price (i+ii)

B Mandatory spares price (including packing & forwarding charges)

i) Ex-works including all taxes & duties

ii) Freight and Insurance Charges(Not Applicable) (As per schedule -4)

iii)Total FOR site price (i + ii)

C Supply portion total FORD price [A+B]

D Erection portion:

i) Total charges for Erection, Testing & Commissioning of all Supply items [as per schedules-

ii) Total charges for entire civil works [ as per Schedules-

iii) Total civil works, erection, Testing and commisioning charges (i)+(ii)

E Total Bid Price = C+D(iii) In figures : Rs.

Total Bid Price in Figures : Rs.

Total Bid Price in words : Rupees

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 2 ( 2 of 2 ) - TAXES(Excluding GST), DUTIES & OTHER LEVIES

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Fill IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

Estimates of Indian Taxes (Excluding GST), Duties and Levies included in the Total Bid Price are as follows:

SL. No. Description of Applicable Tax (Excluding GST) / Duty / Levy

Rate of Tax (Excluding GST)/ Duty / Levy Amount of Taxes (Excluding GST) / Duties in Rupees Rate of Tax (Excluding GST) / Duty / Levy Amount of Taxes (Excluding GST)/ Duties in Rupees

1 SGST/UTGST Applicable taxes (Excluding GST), duties & levies prevailing as on the last date of bid submission shall be quoted

i. Supply Portion

ii. Erection Portion

iii. Civil Portion

i. Supply Portion

ii. Erection Portion

iii. Civil Portion

i. Supply Portion

ii. Erection Portion

iii. Civil Portion

6 Building and other construction workers welfare Cess for Supply, Erection and Civil Portion works

8 a. Applicable Customs Duty (*) (Bidders shall also clearly indicate the breakup of Customs duty such as BCD, Cess,etc.,)

b. If there is any existing Treaty between India and the country from where the goods required for this project are proposed to be imported, then copy of the treaty shall be uploaded.

9 Other Taxes & duties if any (Specify) **

10 Other Taxes & duties if any (Specify) **

11 Total (Sum of 1 to 10)

(*) In case of CIF portion of Supply.

** Please Specify the nature of the other Taxes (Excluding GST) along with the details in the "Rate" Column.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 2A : SCHEDULE OF DISCOUNT

SHEET FOR TECHNOCOMMERCIAL OPENING (UN - PRICED)

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

We hereby offer an unconditional discount on our quoted price in Schedule 2 (1 of2) as under. Any discounts offered anywere else in Bid shall not be considered.

Sl.No Nature of Discount

Percentage of discount Amount (in Rs.) (Fill in as 'YES' in case Prices are indicated in the Item-Wise Bid Financial Offer) Remarks

I Supply Schedules a) Ex-works prices

b) Freight & Insurance (Not Applicable)

II Erection Schedules

III Civil Works Schedules

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE- 2 B - STATEMENT OF COMMERCIAL TERMS AND CONDITIONS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

Details of payments made in the form of Credit card/Debit card/NEFT/RTGS/OTC (over the counter) as per the tender conditions should be keyed in against column no. 3 (a) . BG Amount, BG No. and date, Name and address of the bank issuing the BG, validity of the BG should be keyed in against column no. 3 (b) .

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

STATEMENT OF COMMERCIAL TERMS AND CONDITIONS

Sl. No. Particulars Details

1 Bid proposal form Uploaded.

2 No deviation certificate Uploaded.

3. a). EMD / Bid Security Bids shall be accompanied by bid security (EMD); 1) Up to Rs.1Lakh The following modes of payment will be provided as a part of e-Payment services. • Credit Card/Debit Card • Net Banking • NEFT/RTGS • Over-the-Counter (OTC) • IMPS For further detail regarding mode of e-payment of EMD in e-procurement platform, contact e-procurement cell, Government of Karnataka.

b). EMD amount above Rs.1Lakh by Bank Guarantee/Insurance Surety Bond (ISB)

4 Validity of the Bid.

5 Qualifying Requirements.

6 Financial capability

8 Taxes & Duties.

9 Completion Schedule

10 Defects Liability Period/Guarantee

11 Payment Terms

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 3A(i) - Price Breakup for - Supply portion

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bidder's Name & Address alongwith GSTIN no. :

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

BIDDERS SHALL FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

SUPPLY PORTION: Unit Work-A 110/11kV Yadwad Work-B 220/110kV Esale Work-C 110/11kV Kiruvatti Work-D 110/11kV Bidi TOTAL Indicate whether "Own manufactured Iem" or "Bought Out Item" Indicate country of Origin

Sl No. Name of the Equipment/Materials

SS1 20 MVA, 110/33-11kV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, Numerical RTCC panel, first filling of Oil and 10% spare oil in non-returnable drums etc., complete with Terminal connectors suitable for Single Drake ACSR on primary side of transformer and and copper flat on 11kV and neutral side as per technical specification. Note: Copper Flats required for Power Transformers shall be supplied along with the Transformers as per Technical Specifications No 1.00 1.00 1.00 1.00 4.00

SS2 FIRE FIGHTING EQUIPMENTS: Supply,Erection, Testing & Commissioning of Nitrogen Injection fire extinguishing system as per the recommendation of the supplier of the fire fighting system for Power Transformer below 100MVA as per technical specifications. Set 1.00 1.00 1.00 1.00 4.00

SS3 CIRCUIT BREAKER : SF6 Gas circuit breaker with Semi-Pneumatic/Pneumatic operated/Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal connectors complete suitable for Drake ACSR Conductor and mounting structures complete as per technical specifications. I) 145kV, 3150A, 40 kA Class (for 110/33-11kV Power Transformer) Nos 1.00 1.00 1.00 1.00 4.00

II) 33kV, 800A, 25kA Class a) 33kV line Nos 2.00 2.00 2.00 6.00

b) 33kV side of 110/33-11kV Transformer Nos 1.00 1.00 1.00 1.00 4.00

SS4 ISOLATORS : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators complete set. A) 110kV, 1250A, 40kA Class Double Break Manually operated isolator with terminal connectors suitable for Drake ACSR., complete as per technical specification 1) Upright mounting type with out earth Switch (live point height 4600mm) Set 1.00 1.00 1.00 3.00

B) 110kV, 1250A, 40kA Class Double Break Motor operated isolator with terminal connectors suitable for Drake ACSR., complete as per technical specification 1) Upright mounting type with out earth Switch (live point height 4600mm) Set 1.00 1.00

C) 33 kV, 800A, 25kA Class Double Break Manually operated isolator With terminal connectors suitable for DRAKE ACSR complete as per technical specification a)Upright mounting type with Earth switch (Live point height 4000mm) Set 2.00 2.00 0.00 2.00 6.00

b)Upright mounting type without Earth switch (Live point height 4000mm) Set 5.00 5.00 4.00 5.00 19.00

SS5 CURRENT TRANSFORMER : Current transformer Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR conductor, as per Technical Specicification. i) 110 kV class, 40 kA, CT of ratio 200-100/ 1-1-1A for Transformers Core - 1 : Vk-400 V at 200A, Rct 2 ohm at 200/1A, Accuracy class PS-Dist/Dif Core- 2 : 10 VA, Accuracy class 0.2s- Metering Core - 3 : 30 VA, Accuracy class 5P20-Back up Nos 3.00 3.00 3.00 3.00 12.00

ii) 33 kV class, 31.5kA, CT of ratio 400-200/ 1-1-1A for Line Core - 1 : Vk-240 V, Rct 5 ohm at 400/1A, Accuracy class PS-Dist/Dif Core- 2 : 10 VA, Accuracy class 0.2s- Metering Core - 3 : 30 VA, Accuracy class 5P20-Back up No 6.00 6.00 0.00 6.00 18.00

iii) 33 kV class, 31.5kA, CT of ratio 400-200/ 1-1-1A for Tranformers Core - 1 : Vk-240 V, Rct 5 ohm at 400/1A, Accuracy class PS-Dist/Dif Core- 2 : 10 VA, Accuracy class 0.2s- Metering Core - 3 : 30 VA, Accuracy class 5P20-Back up No 3.00 3.00 3.00 3.00 12.00

iv) 33 kV Class, 31.5kA, NCT of ratio 400-200/1-1-1A for REFR Protection (of similar rating and ratio as that of Incomer of 33 kV CT at 33 kV side of transformer) with terminal connector suitable for 2 Nos. of 50mmx8mm Copper flats./For Work B- with terminal connector suitable for 2 Nos. of 75mmx8mm Copper flats NOTE: 1) For details refer APPENDIX-3 : Technical Parameters of current Transformers for type and rating in Section -Instrument Transformer Technical Specfication. 2) All the current transformer in each kV Class shall be of One and the same make for interchangeability and relability of performance. 3) The make & characteristic of 11kV NCT should be the same as that of the Incomer CT of 11kV switchgear No 1.00 1.00 1.00 1.00 4.00

SS6 VOLTAGE TRANSFORMER : Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR with marshalling box KIOSK as per technical specifications. 33 kV Class, 33 kV/ √3/110 V/√3-110 V/√3-110 V/√3 Core - 1 : 300 VA, Accuracy class 0.2 - Protection Core - 2 : 200 VA, Accuracy class 3P - Metering Core - 3 : 50 VA, Accuracy class 3P - Open delta No 3.00 3.00 3.00 3.00 12.00

SS7 SURGE ARRESTOR : (Procelain/Polymer) metal oxide, gapless type with rigid bimetallic terminal connectors suitable for Drake ACSR as per technical specifications. 1) 96 kV, 10 kA, Class-III(SM), Metal Oxide type - For Transformer No 3.00 3.00 3.00 3.00 12.00

2) 30 kV, 10 kA, Metal Oxide with surge counter, Class -III(Station Medium Duty SM) - For Transformer No 9.00 3.00 3.00 3.00 18.00

3) 30 kV, 10 kA, with surge counter, Class -II(Station Low Duty SL) - For Overhead Line No 0.00 6.00 0.00 6.00 12.00

SS8 Control and Relay Panel Complete as per Technical specifications: 1) Simplex type SCADA Compatible Control and Relay Panels complete as per Technical Specifications, for Power Transformer 110/33-11kV No. 1.00 0.00 1.00 1.00 3.00

2) Simplex type SCADA Compatible Control and Relay Panels complete as per Technical Specifications, for 33kV line No. 2.00 0.00 0.00 2.00 4.00

3) SAS Compatible Control and Relay Panels complete as per Technical Specifications, for 110/33-11 kV Transformer (As per Annexure RPP5-SAS) for Work B No. 0.00 1.00 0.00 0.00 1.00

4) SAS Compatible Control and Relay Panels complete as per Technical Specifications for 33kV Line (As per Annexure RPP7-SAS) for Work B Note: 1. As there is no SAS at 220/110/11kV Esale SubStation, the C&R Panels shall be provided with annunciator, Isolator & Breaker Control switches. 2. The accuracy class of metering core of CTs and VTs and ETV meter of C&R Panels shall be 0.2s accuracy class irrespective of what has been indicated else where in the bid document. 3. The Electronic Trivector meter of 0.2S accuracy Class with ABT & TOD features, DLMS protocol energy meter has to be provided. No. 0.00 2.00 0.00 0.00 2.00

SS9 Station structure and GI Mounting Structure Note: Station Structure fabricated out of galvanized mild steel including Bolts and Nuts: Station Structure: i) 110kV Station Structure Tower - 1T1 with peak (1.054t per tower) (0.986t per tower for structure+ 0.068 t per tower for Bolt &Nuts) No/t 04/4.2160 06/6.3240 01/1.0540 04/4.2160 15/15.8100

ii) 110kV Station Beams Beam type 1B1 with peak.(10.4 mtr bay width)(0.553t per tower) (0.521t per tower for structure+ 0.032 t per tower for Bolt &Nuts) No/t 02/1.1060 03/1.6590 01/0.5530 02/1.1060 08/4.4240

iii) 33kV Station Structure Tower - 3T1 with out peak (0.599t per tower) (0.57t per tower for structure+ 0.0285t per tower for Bolt &Nuts) No/t 09/5.3865 09/5.3865 02/1.1970 09/5.3865 29/17.3565

iv) 33kV Station Beams - 3B1 suitable for 6m Bay Width (0.242t per tower) (0.23t per tower for structure+ 0.0115t per tower for Bolt &Nuts) No/t 05/1.2075 05/1.2075 01/0.2415 05/1.2075 16/3.8640

v) Street Lighting lattice type Structure along with GI Pipe for fixing LED Lamp (0.182t per tower for structure +0.0091t per structure for Bolts & Nuts) No/t 01/0.1911 0.00 02/0.3822 02/0.3822 05/0.9555

vi) Lightning Mast structure (approx wt. 2.678 MT with 5% towards B&N =2.812 MT) No/t 0.00 01/2.8119 0.00 00/0.0000 01/2.8119

GI Mounting Structure i) 110kV Isolator Live point height 4600 mm (0.752 t per Structure)(0.726 t per tower for structure+ 0.026 t per tower including Bolt &Nuts) No/t 01/0.7520 01/0.7520 01/0.7520 01/0.7520 04/3.0080

ii) 110kV Current transformer (0.158t per Structure) (0.146 t per tower for structure+ 0.012 t per tower for Bolt & Nuts) No/t 04/0.6320 03/0.4740 03/0.4740 03/0.4740 13/2.0540

iii) 110kV Lightening Arrestors. (0.116t per Structure) (0.105 t per tower for structure+ 0.011 t per tower for Bolt & Nuts) No/t 03/0.3480 03/0.3480 03/0.3480 03/0.3480 12/1.3920

iv) 110kV Pedestal Insulators for Bus(0.14t per Structure) (0.127 t per tower for structure+ 0.013 t per tower for Bolt &Nuts) No/t 03/0.4200 09/1.2600 03/0.4200 03/0.4200 18/2.5200

v) For High pedestal insulators for 110 kV side (0.150 t per tower) (0.134 t per tower for structure+ 0.016 t per tower for Bolt &Nuts) No/t 03/0.4500 03/0.4500 03/0.4500 03/0.4500 12/1.8000

vi) 33kV Isolator (0.257 t per Structure) (0.25 t per tower for structure+ 0.007t per tower for Bolt & Nuts) No/t 07/1.7990 07/1.7990 04/1.0280 07/1.7990 25/6.4250

vii) 33kV Current Transformer and 33kV NCT (0.093 t per Structure) (0.08885t per tower for structure+ 0.004t per tower for Bolt & Nuts) No/t 09/0.8357 10/0.9285 04/0.3714 10/0.9285 33/3.0641

viii) 33kV Potential Transformer (0.093 t per Structure) (0.08885t per tower for structure+ 0.004t per tower for Bolt & Nuts) No/t 03/0.2786 03/0.2786 03/0.2786 03/0.2786 12/1.1142

ix) 30kV Lightening Arrestors (0.087 t per Structure) (0.082t per tower for structure+ 0.005t per tower for Bolt & Nuts) No/t 09/0.7830 09/0.7830 03/0.2610 09/0.7830 30/2.6100

x) 33kV PI for Bus (0.087 t per Structure) (0.082t per tower for structure+ 0.005t per tower for Bolt & Nuts) No/t 06/0.5220 06/0.5220 04/0.3480 06/0.5220 22/1.9140

SS10 Total Weight of Station Structures and Mounting Structures fabricated out of galvanized mild steel (excluding Bolts & nuts) as per Technical Specification t 17.902 23.596 7.699 18.027 67.22

SS11 Total Weight of supply of Bolts & nuts of Station Structures and Mounting Structures as per Technical Specification. t 1.025 1.388 0.460 1.026 3.90

SS12 BUS BAR FORMATION : i) Drake ACSR Mtr 450.00 500.00 150.00 500.00 1600.00

SS13 INSULATORS: a) Post Insulators Cylindrical Solid core as per IS5350, Part II & III i)110kV 1unit/stack Nos 6.00 12 6.00 6.00 30.00

ii) 33kV 1unit/stack Nos 6.00 6.00 4.00 6.00 22.00

SS14 DISC INSULATORS WITH HARDWARES : 1) 90KN Disc Insulators 110kV Side- Single Tension String 9 units in each string-18 strings=9*18=162Nos. 110kV Side - Single Suspension String 9 units in each string-9 strings=9*9=81Nos. 33kV Side - Single Tension String 3 units in each string - 42 strings=3*42=126Nos. 33kV Side - Single Suspension String 3 units in each string-3 strings=3*3=9Nos. Nos 117.00 117.00 18.00 126.00 378.00

2) Single Tension Clamps with Hardware suitable for Drake ACSR and sinlge tension string of 9Nos.x90KN Disc Insulators(110kV Side)-18Nos. Single Tension Clamps with Hardware suitable for Drake ACSR and sinlge tension string of 3Nos.x90KN Disc Insulators(33kV Side)-42Nos. Nos. 18.00 18.00 6.00 18.00 60.00

3) Single Suspension Clamps with Hardware suitable for Drake ACSR and single suspension string of 9Nos.x90KN Disc Insulators(110kV Side)-9Nos. Single Suspension Clamps with Hardware suitable for Drake ACSR and single suspension string of 3Nos.x90KN Disc Insulators(33kV Side)-3Nos. Nos. 3.00 3.00 0.00 6.00 12.00

SS15 INSULATOR HARDWARE & CLAMPS as per technical specification: a) Post insulator clamp suitable for Single Drake ACSR and 110kV Solid core insulator Nos. 6.00 12.00 10.00 12.00 40.00

b) Post insulator clamp suitable for Single Drake ACSR and 33kV Solid core insulator Nos. 6.00 6.00 0.00 0.00 12.00

c) C Type wedge connector suitable for Drake -Drake Nos 36.00 24.00 15.00 27.00 102.00

d) C Type wedge connector suitable for Drake -Coyote (33 kV Side ) Nos 0.00 12.00 0.00 12.00 24.00

SS16 AC Distribution Box (outdoor): AC Distribution Box Single front (Outdoor type), 6 Terminal one I/C of 100A MCCB 20kA + 6 O/G MCB 16A + 1 O/G of 100A, HRC fuse, complete as per technical specification No 1.00 2.00 0.00 1.00 4.00

SS17 LTAC Distribution panel ( Indoor) comprising of Volt meter, Ammeter & 1 no of ETV meter, 1 I/C MCCB 200A + 2 nos 3 phase, 63A OG HRC fuse + 2 nos 3 phase 32A OG HRC fuse + 6 nos 3 phase 16A HRC fuse etec complete with all necessary protection as per technical specification 415 V. No 1.00 0.00 0.00 0.00 1.00

SS18 LT DC Distribution panel ( Indoor) as per Technical specification comprising of Earth fault indicator, Indication circuit for AC main failure, 1 No 100A SFU for IC + 12 nos., 32A SFU for OG etc,. complete. No 1.00 0.00 0.00 0.00 1.00

SS19 LT Power armoured UG cable as per specification: a) 1.1kV grade PVC Insulated Copper cables 4C x 25 Sq.mm Mtr 25.00 0.00 25.00 0.00 50.00

b) 1.1kV grade PVC Insulated Aluminium cables 4C x 25 Sq.mm Mtr 70.00 0.00 0.00 0.00 70.00

c) 1.1kV grade PVC Insulated Aluminium cables 4C x 70 Sq.mm (including Yard Lighting Quantity-100Mtrs, for Work-B ) Mtr 0.00 200.00 0.00 0.00 200.00

SS20 STATION BATTERY & BATTERY CHARGER : for work C a) 110V, 200 Ah, Battery set consisting of 55 No. cells each as per Technical Specification. Set 0.00 0.00 1.00 0.00 1.00

b) Battery charger- suitable for '1 X 110 V, 200 Ah, Battery set consisting of 55 No. cells- 15 A float and 30 A boost (with float and boost battery charger as per technical specification). Set 0.00 0.00 1.00 0.00 1.00

SS21 1.1kV class PVC insulated armoured copper control cables of following sizes with Lugs/Ferrules/Gland as per technical specifications: i) 19 Core 2.5 Sq.mm. Mtr 465.00 1000.00 700.00 1120.00 3285.00

iii) 4 Core 2.5 Sq.mm. (including Yard Lighting Quantity- for Work-B ) Mtr 1495.00 1420.00 1100.00 3200.00 7215.00

iv) 2 Core 6.0 Sq.mm (including Yard Lighting Quantity-500Mtrs, for Work-C and work D) Mtr 435.00 0.00 1000.00 500.00 1935.00

SS22 Miscellaneous Items a) Rubber Mats 2000mmx1000mmsx12mm size No 4.00 4 2 5 15.00

b) Equipment and earthing name plate including fixing at outdoor yard. Nos 40.00 40 31 20 131.00

SS23 Equipment's required for establishing SCADA Communication as per KPTCL Specification a) Multi Functional Transducer(MFT), 0.2S class including labour charges No. 4.00 4.00 2.00 4.00 14.00

b) Opto Coupler (220 or 110V DC) including labour charges. No. 4.00 4.00 2.00 4.00 14.00

CABLES c) Current Cables - copper core with c/s 4.0sqmm multistrand 4 core Mtr 40.00 40.00 20.00 40.00 140.00

d) Voltage Cables- copper core with c/s 2.5sqmm multistrand 4 core Mtr 20.00 20.00 10.00 20.00 70.00

e) Signal Cables- armoured copper core with c/s 0.5sqmm multistrand 10 core Mtr 40.00 40.00 20.00 40.00 140.00

f) Control Cables -copper core with c/s 1.5sqmm multistrand 10 core Note : 1) Satellite Communication required will be arranged by SLDC. 2) The detailed BOM & specification of SCADA equipment shall be obtained from SEE-SCADA Mtr 20.00 20.00 10.00 20.00 70.00

SS24 STATION & YARD LIGHTING (OUTDOOR) a) Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes forcable/ conduit entry as required with one coat of primer of approved make etc. (200mm x 200mm x 65mm) Nos 1.00 0.00 2.00 2.00 5.00

b) Supplying and fixing of 6-32 A Single pole MCB Nos 1.00 0.00 2.00 2.00 5.00

c) Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material LED streetlight 200W Nos 1.00 0.00 2.00 2.00 5.00

d) Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000hr @Lumen Maintenance of 70%, CCT>5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire>IK08. PowerFactor>0.9 with mains, Surge Protection-Min 5KV along with Overvoltage/Overload, shortcircuit /miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS10322/ IEC60598, LM79 & LM80 Adherence with RoHS. UL approved MCPCB. Top access streetlight with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with 120W System Power consumption. LED Efficiency>1301m/w, nominalCRI>75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark/ name shall be Engraved /Embossing on the die cast housing/ Body part Warranty of 2 Years against any manufacturing defect working understandard electrical conditions as mentioned above should be given by LED manufacturer & Cree/ Nichia/ Lumileds/ Osram make LED Source. Nos 12.00 12.00

e) Supplying and fixing regular MCB distribution boards on wall/woodboard/flushmounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3phase/single door with powder coated painting Made out of 14 SWG MS enclosure. Single Door 12 Way SP & N Nos 1.00 1.00

f) Supplying and fixing of Modular MCB Devices (Tripper) With Breaking capacity of 6kA. 16-32A SP Nos 12.00 12.00

g)Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve,indicator ON/OFF, energycross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC60898. 50-63A TPN Nos 1.00 1.00

NOTE 1. Any clarifications / hard copy of drawings can be obtained from the office of the Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

2. Spacers shall be provided wherever necessary and no extra charges is payable on account of the same.

3. Supply of equipment/materials and the Erection charges shall include loading and unloading.

4. Copper Flat and GI Flat required for Power Transformers (if supply is in Bidder's scope) shall be supplied alongwith the Transformers and no extra cost is payable on this account.

5. The Bidder shall take necessary action to ensure that all the materials supplied shall be properly housed to ensure satisfactory commissioning.

6. The bidder shall quote same rates for common materials in all the Item-Wise Financial Bid Offer.

7. Released materials shall be transported to the nearest Major Works Store of KPTCL without any additional cost as per the directions of the Engineer in charge of the work.

8. The Bidder shall clearly indicate whether the materials/equipments are “Own manufactured” or “Bought out item”.

Place Designation

Name of Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 3A(ii) - Price Breakup for - ERECTION PORTION INCLUDING TESTING & COMMISSIONING and DISMANTLING PORTION.

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bidder's Name & Address alongwith GSTIN no. :

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009.

BIDDERS SHALL FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

ERECTION PORTION INCLUDING TESTING & COMMISSIONING and DISMANTLING PORTION: Unit Work-A 110/11kV Yadwad Work-B 220/110kV Esale Work-C 110/11kV Kiruvatti Work-D 110/11kV Bidi TOTAL

Sl No. Name of the Equipment/Materials

SE1 20 MVA, 110/33-11kV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, Numerical RTCC panel, first filling of Oil and 10% spare oil in non-returnable drums etc., complete with Terminal connectors suitable for Single Drake ACSR on primary side of transformer and and copper flat on 11kV and neutral side as per technical specification. Note: The Bidder has to quote for complete scope of erection of transformer including moving the transformer from the point of unloading to the point of erection, assemblying the complete transformer, filtration of oil using filter set of the bidder to achieve the required insulation vlaue as per I.E. Specifications, erection of the complete transformer(replacement of gaskets and miscellaneous itmes if any), wiring of transformer, testing & commissioning etc., complete. No 1.00 1.00 1.00 1.00 4.00

SE2 CIRCUIT BREAKER : SF6 Gas circuit breaker with Semi-Pneumatic/Pneumatic operated/Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal connectors complete suitable for Drake ACSR Conductor and mounting structures complete as per technical specifications. I) 145kV, 3150A, 40 kA Class Nos 1.00 1.00 1.00 1.00 4.00

II) 33kV, 800A, 25kA Class a) 33kV line b) 33kV side of 110/33kV Transformer Nos 3.00 3.00 1.00 3.00 10.00

SE3 ISOLATORS : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators complete set. A) 110kV, 1250A, 40kA Class Double Break Manually operated isolator with terminal connectors suitable for Drake ACSR., complete as per technical specification 1) Upright mounting type with out earth Switch (live point height 4600mm) Set 1.00 1.00 1.00 1.00 4.00

B) 33kV, 800A, 25kA Class Double Break Manually operated isolator With terminal connectors suitable for DRAKE ACSR complete as per technical specification a)Upright mounting type with Earth switch (Live point height 4000mm) b)Upright mounting type without Earth switch (Live point height 4000mm) Set 7.00 7.00 4.00 7.00 25.00

SE4 CURRENT TRANSFORMER : Current transformer Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR conductor, as per Technical Specicification. i) 110 kV class, 40 kA, CT of ratio 200-100/ 1-1-1A for Transformers Core - 1 : Vk-400 V at 200A, Rct 2 ohm at 200/1A, Accuracy class PS-Dist/Dif Core- 2 : 10 VA, Accuracy class 0.2s- Metering Core - 3 : 30 VA, Accuracy class 5P20-Back up Nos 3.00 3.00 3.00 3.00 12.00

ii) & iii) 33 kV class, 31.5kA, CT of ratio 400-200/ 1-1-1A for Line & fro Transformer Core - 1 : Vk-240 V, Rct 5 ohm at 400/1A, Accuracy class PS-Dist/Dif Core- 2 : 10 VA, Accuracy class 0.2s- Metering Core - 3 : 30 VA, Accuracy class 5P20-Back up No 9.00 9.00 3.00 9.00 30.00

iv) 33 kV Class, 31.5 kA, NCT of ratio 400-200/1-1-1A for REFR Protection (of similar rating and ratio as that of Incomer of 33 kV CT at 33 kV side of trfr) with terminal connector suitable for 2 Nos. of 50mmx8mm Copper flats. No 1.00 1.00 1.00 1.00 4.00

SE5 VOLTAGE TRANSFORMER : Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR with marshalling box KIOSK as per technical specifications. 33 kV Class, 33 kV/ √3/110 V/√3-110 V/√3-110 V/√3 Core - 1 : 300 VA, Accuracy class 0.2 - Protection Core - 2 : 200 VA, Accuracy class 3P - Metering Core - 3 : 50 VA, Accuracy class 3P - Open delta No 3.00 3.00 3.00 3.00 12.00

SE6 SURGE ARRESTOR : (Procelain/Polymer) metal oxide, gapless type with rigid bimetallic terminal connectors suitable for Drake ACSR as per technical specifications. 1) 96 kV, 10 kA, Class-III(SM), Metal Oxide type - For Transformer No 3.00 3.00 3.00 3.00 12.00

2) 30 kV, 10 kA, Metal Oxide with surge counter, Class -III(Station Medium Duty SM) - For Transformer 3) 30 kV, 10 kA, with surge counter, Class -II(Station Low Duty SL) - For Overhead Line No 9.00 9.00 3.00 9.00 30.00

SE7 Control and Relay Panel Complete as per Technical specifications: 1) & 3) Simplex type SCADA Compatible Control and Relay Panels complete as per Technical Specifications, for Power Transformer 110/33-11kV No. 1.00 1.00 1.00 1.00 4.00

2) & 4) Simplex type SCADA/SAS Compatible Control and Relay Panels complete as per Technical Specifications, for 33 kV line Note: 1. As there is no SAS at 220/110/11kV Esale SubStation, the C&R Panels shall be provided with annunciator, Isolator & Breaker Control switches. 2. The accuracy class of metering core of CTs and VTs and ETV meter of C&R Panels shall be 0.2s accuracy class irrespective of what has been indicated else where in the bid document. 3. The Electronic Trivector meter of 0.2S accuracy Class with ABT & TOD features, DLMS protocol energy meter has to be provided No. 2.00 2.00 0.00 2.00 6.00

Station structure and GI Mounting Structure Note: Station Structure fabricated out of galvanized mild steel including Bolts and Nuts: Station Structure: i) 110kV Station Structure Tower - 1T1 with peak (1.054t per tower) (0.986t per tower for structure+ 0.068 t per tower for Bolt &Nuts) No/t 04/4.2160 06/6.3240 01/1.0540 04/4.2160 15/15.8100

ii) 110kV Station Beams Beam type 1B1 with peak.(10.4 mtr bay width)(0.553t per tower) (0.521t per tower for structure+ 0.032 t per tower for Bolt &Nuts) No/t 02/1.1060 03/1.6590 01/0.5530 02/1.1060 08/4.4240

iii) 33kV Station Structure Tower - 3T1 with peak (0.599t per tower) (0.57t per tower for structure+ 0.0285t per tower for Bolt &Nuts) No/t 09/5.3865 09/5.3865 02/1.1970 09/5.3865 29/17.3565

iv) 33kV Station Beams - 3B1 suitable for 6m Bay Width (0.242t per tower) (0.23t per tower for structure+ 0.0115t per tower for Bolt &Nuts) No/t 05/1.2075 05/1.2075 01/0.2415 05/1.2075 16/3.8640

v) Street Lighting lattice type Structure along with GI Pipe for fixing LED Lamp (0.182t per tower for structure +0.0091t per structure for Bolts & Nuts) No/t 01/0.1911 00/0.0000 02/0.3822 02/0.3822 05/0.9555

vi)Lightning Mast structure (approx wt. 2.678 MT with 5% towards B&N =2.812 MT) No/t 0.00 01/2.8119 00/0.0000 00/0.0000 01/2.8119

GI Mounting Structure i) 110kV Isolator Live point height 4600 mm (0.752 t per Structure)(0.726 t per tower for structure+ 0.026 t per tower including Bolt &Nuts) No/t 01/0.7520 01/0.7520 01/0.7520 01/0.7520 04/3.0080

ii) 110kV Current transformer (0.158t per Structure) (0.146 t per tower for structure+ 0.012 t per tower for Bolt & Nuts) No/t 04/0.6320 03/0.4740 03/0.4740 03/0.4740 13/2.0540

iii) 110kV Lightening Arrestors. (0.116t per Structure) (0.105 t per tower for structure+ 0.011 t per tower for Bolt & Nuts) No/t 03/0.3480 03/0.3480 03/0.3480 03/0.3480 12/1.3920

iv) 110kV Pedestal Insulators for Bus(0.14t per Structure) (0.127 t per tower for structure+ 0.013 t per tower for Bolt &Nuts) No/t 03/0.4200 09/1.2600 03/0.4200 03/0.4200 18/2.5200

v) For High pedestal insulators for 110 kV side (0.150 t per tower) (0.134 t per tower for structure+ 0.016 t per tower for Bolt &Nuts) No/t 03/0.4500 03/0.4500 03/0.4500 03/0.4500 12/1.8000

vi) 33kV Isolator (0.257 t per Structure) (0.25 t per tower for structure+ 0.007t per tower for Bolt & Nuts) No/t 07/1.7990 07/1.7990 04/1.0280 07/1.7990 25/6.4250

vii) 33kV Current Transformer and 33kV NCT (0.093 t per Structure) (0.08885t per tower for structure+ 0.004t per tower for Bolt & Nuts) No/t 09/0.8357 10/0.9285 04/0.3714 10/0.9285 33/3.0641

viii) 33kV Potential Transformer (0.093 t per Structure) (0.08885t per tower for structure+ 0.004t per tower for Bolt & Nuts) No/t 03/0.2786 03/0.2786 03/0.2786 03/0.2786 12/1.1142

ix) 30kV Lightening Arrestors (0.087 t per Structure) (0.082t per tower for structure+ 0.005t per tower for Bolt & Nuts) No/t 09/0.7830 09/0.7830 03/0.2610 09/0.7830 30/2.6100

x) 33kV PI for Bus (0.087 t per Structure) (0.082t per tower for structure+ 0.005t per tower for Bolt & Nuts) No/t 06/0.5220 06/0.5220 04/0.3480 06/0.5220 22/1.9140

SE8 Total Weight of Station Structures and Mounting Structures abricated out of galvanized mild steel (including Bolts & nuts) as per Technical Specification t 18.927 24.984 8.159 19.053 71.12

SE9 Formation of Main/Cross Bus with Single Drake Conductor Bay 5.00 5.00 2.00 5.00 17.00

SE10 INSULATORS: a) Post Insulators Cylindrical Solid core as per IS5350, Part II & III i)110kV 1unit/stack Nos 6.00 12 6.00 6.00 30.00

ii) 33kV 1unit/stack Nos 6.00 6.00 4.00 6.00 22.00

SE11 AC Distribution Box (outdoor): AC Distribution box (outdoor) Single front type with 6 terminals 1200 x 1350 x 300 mm one I/C of 100 A MCCB 20KA+ 6 O/G 16 A MCB +1 O/G of 100 A HRC Fuse panel 415 V outdoor type No 1.00 2.00 0.00 1.00 4.00

SE12 LTAC Distribution panel ( Indoor) comprising of Volt meter, Ammeter & 1 no of ETV meter, 1 I/C MCCB 200A + 2 nos 3 phase, 63A OG HRC fuse + 2 nos 3 phase 32A OG HRC fuse + 6 nos 3 phase 16A HRC fuse etec complete with all necessary protection as per technical specification 415 V. No 1.00 0.00 0.00 1.00

SE13 LT DC Distribution panel ( Indoor) as per Technical specification comprising of Earth fault indicator, Indication circuit for AC main failure, 1 No 100A SFU for IC + 12 nos., 32A SFU for OG etc,. complete. No 1.00 0.00 0.00 1.00

SE14 STATION BATTERY & BATTERY CHARGER : for work C a) 110 V, 200 AH, Battery set consisting of 55 No. cells each as per Technical Specification. Set 0.00 0.00 1.00 0.00 1.00

b) Battery charger- suitable for '1 X 110 V, 200 AH, Battery set consisting of 55 No. cells- 15 A float and 30 A boost (with float and boost battery charger as per technical specification). Set 0.00 0.00 1.00 0.00 1.00

SE15 LT Power armoured UG cable as per specification: a) 1.1kV grade PVC Insulated Copper cables 4C x 25 Sq.mm b) 1.1kV grade PVC Insulated Alluminium cables 4C x 25 Sq.mm c)1.1kV grade PVC Insulated Alluminium cables 4C x 70 Sq.mm Mtr 95.00 100.00 25.00 220.00

SE16 1.1kV class PVC insulated armoured copper control cables of following sizes with Lugs/Ferrules/Gland as per technical specifications: i) 19 Core 2.5 Sq.mm. ii) 4 Core 6.0 Sq.mm. iii) 4 Core 2.5 Sq.mm. iv) 2 Core 6.0 Sq.mm v) 2 Core 2.5 Sq.mm. vi) 10 core 2.5Sq.mm vii) 4 Core 25 Sq.mm. Mtr 4010.00 7420.00 4200.00 8460.00 24090.00

SE17 Equipment's required for establishing SCADA Communication as per KPTCL Specification a) Multi Functional Transducer(MFT) No. 4.00 4.00 2.00 4.00 14.00

b) Opto Coupler (220 or 110V DC) No. 4.00 4.00 2.00 4.00 14.00

CABLES c) Current Cables - copper core with c/s 4.0sqmm mutlistrand 4 core d) Voltage Cables- copper core with c/s 2.5sqmm mutlistrand 4 core e) Signal Cables- armoured copper core with c/s 0.5sqmm mutlistrand 10 core f) Control Cables -copper core with c/s 1.5sqmm mutlistrand 10 core Note : 1) Satellite Communication required will be arranged by SLDC. 2) The detailed BOM & specification of SCADA equipment shall be obtained from SEE-SCADA Mtr 120.00 120.00 60.00 120.00 420.00

SE18 Fixing LED floodlight fitting over existing pole /wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. No. 12.00 12.00

SE19 Earth Mat formation : a) Supplying and laying MS.Flat 50 x 6 mm flat welding and applying ACB paint to welded portion as per drawing/standard if required (all other materials to be supplied by contractor) Rmtr. 407 0.00 0.00 0.00 407.00

b) Grounding of equipments with 50 x 6 mm G I flat and connecting equipments to the earth mat/ground pit including all connected works with all materials supplied by the contractor. Rmtr. 643 925.00 300.00 982.00 2850.00

c) Providing 25mm dia, 1.05mtr. long Earthmat Spike of MS Rod including bending top 50 mm etc No. 15 45.00 0.00 0.00 60.00

d) Providing C.I. Pipe of 100mm ID 13mm thick 2.75 mtr. long with 2 part GI Flat 50x6mm clamp welded allround the pipe etc., including cost of excavation (all materials supplied by contractor) No. 12 24.00 11.00 17.00 64.00

e) Supplying and fixing 450mm dia x 450mm height 1.5" to 2" Hume pipe collars for earth pits. No. 12 24.00 11.00 17.00 64.00

f) Supplying and laying M Round 40mm dia welding and applying ACB paint to welded portion as per drawing/standard if required (all other materials to be supplied by contractor) for Work B Rmtr. 0.00 2318.00 0.00 0.00 2318.00

SE20 1) Releasing of Equipments: (for work C) a) Releasing of 110 V, 100 AH, Battery set consisting of 55 No. cells each Set 0.00 0.00 1.00 0.00 1.00

b) Releasing of Battery charger- suitable for '1 X 110 V, 100 AH, Battery set Nos 0.00 0.00 1.00 0.00 1.00

1. Any clarifications / hard copy of drawings can be obtained from the office of theThe Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009.

2. The Erection charges shall include transportaion to site, loading and unloading.

3. Released materials shall be transported to the nearest Major Works Store of KPTCL without any additional cost as per the directions of the Engineer in charge of the work.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 3C(i) - Price Breakup for - Station Civil Portion.

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bidder's Name & Address alongwith GSTIN no. :

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009.

BIDDERS SHALL FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

Sl. No. Specifications Unit Work-A 110/11kV Yadwad Work-B 220/110kV Esale Work-C 110/11kV Kiruvatti Work-D 110/11kV Bidi TOTAL

B1 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth cum 171.74 4000.00 0.00 43.75 4215.49

B2 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m cum 725.27 2254.53 432.56 208.00 3620.36

B3 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. cum 250.20 1690.39 0.00 317.92 2258.51

B4 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates cum 92.99 90.95 37.85 71.29 293.08

B5 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - (3% cosidered for Form work) cum 168.01 164.76 87.00 127.69 547.46

B6 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates- (70% considered for Form work) cum 159.41 109.58 60.43 1.52 330.94

B7 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates- (60% considered for Form work) cum 0.00 3.79 0.00 0.00 3.79

B8 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (70% considered for Form work) Ground Floor cum 0.00 7.31 3.31 5.38 16.00

B9 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (60% considered for Form work) First Floor cum 0.00 4.50 0.00 0.00 4.50

B10 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (50% considered for Form work) Ground Floor cum 6.19 13.09 2.09 13.70 35.07

B11 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates (3% cosidered for Form work) cum 0.00 30.70 0.00 0.00 30.70

B12 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings kg 0.00 2600.00 0.00 2575.00 5175.00

B13 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification All other type of structures kg 34742.00 14938.87 7594.03 10055.77 67330.67

B14 Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. kg 4827.07 7793.09 4839.84 1143.20 18603.20

B15 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. For Road cum 77.70 28.88 0.00 0.00 106.58

B16 Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm,aggregate cement ratio not to exceed 14:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 140 kg/ m3, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 t vibratory roller, finishing and curing. For Road cum 58.28 17.50 0.00 0.00 75.78

B17 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M40 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (5% considered for Form work) cum 62.30 31.15 0.00 18.75 112.20

B18 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kgs 0.00 1500.00 0.00 0.00 1500.00

B19 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc excluding the cost of CI frame and cover. each 0.00 15.00 5.00 5.00 25.00

B20 Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. each 7.00 10.00 2.00 5.00 24.00

B21 Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixing the cover in C.C. 1:2:4 and C.M. 1:3 plastering 20 mm thick to all exposed faces, curing for 10 days with all lead and lift with ppurtenances. complete. Medium Duty Set 7.00 25.00 0.00 10.00 42.00

B22 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) cum 0.00 196.87 25.52 0.00 222.39

B23 Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. sqm 110.56 428.17 123.52 207.81 870.06

B24 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. sqm 0.00 95.80 0.00 0.00 95.80

B25 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. sqm 211.44 100.00 0.00 0.00 311.44

B26 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 m 0.00 25.00 25.00 100.00 150.00

B27 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 75mm dia., 6 kg/sqcm & class 3 m 50.00 12.50 0.00 0.00 62.50

B28 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 160mm dia., 6 kg/sqcm & class 3 m 75.00 120.00 120.00 0.00 315.00

B29 Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey. RCC NP3 Class pipe of 900 mm dia. m 0.00 12.50 12.50 0.00 25.00

B30 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. cum 15.82 11.51 1.79 27.22 56.34

B31 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. sqm 0.00 41.72 0.00 0.00 41.72

B32 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge sqm 0.00 135.00 0.00 0.00 135.00

B33 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. sqm 41.25 23.80 0.00 32.00 97.05

B34 Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 500x500 mm sqm 0.00 45.00 0.00 0.00 45.00

B35 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. sqm 0.00 85.00 0.00 90.00 175.00

B36 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge+ with primer coat. sqm 421.50 85.00 0.00 130.00 636.50

B37 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. sqm 56.00 745.50 84.00 207.81 1093.31

B38 Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete. Work shall be carried out as per the instructions of Engineerin-charge of works as per the standard procedure(Vol-6,P.no.158,I.no.1) cum 120.00 32.50 325.00 0.00 477.50

B39 Dismantling chain link fencing including removing the posts, cement concrete pedestals, foundation and stacking the useful materials safely at a distance to the appropriate disposal area as per direction of Engineer-in- charge. Kg 0.00 400.00 0.00 0.00 400.00

B40 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.In Cement Mortar cum 0.00 7.92 0.00 0.00 7.92

B41 Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking to the appropriate disposal area as per direction of Engineer-in-charge. Kg 0.00 30.00 0.00 0.00 30.00

B42 Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm.Maximum possible size – 1219mm x 1219mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) sqm 0.00 11.50 0.00 0.00 11.50

B43 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. (Made of G.I. wire of dia 4 mm) sqm 126.45 387.00 0.00 0.00 513.45

B44 Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire m 698.94 1127.00 0.00 0.00 1825.94

B45 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications sqm 210.75 125.00 0.00 0.00 335.75

B46 Concealed Conduit System Supplying heavy gauge PVC conduitpipe......mmdia..........mm thick confirming to IS2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC endenclosures, run with 18 SWGGI fish wire wherever necessary. 19/20 mm dia 2 mm thick m 0.00 20.00 0.00 25.00 45.00

B47 Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25mm dia 2mm thick m 24.00 50.00 0.00 40.00 114.00

B48 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 19/20mm dia 2mm thick m 0.00 20.00 0.00 25.00 45.00

B49 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 25mm dia 2mm thick m 0.00 25.00 0.00 50.00 75.00

B50 Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 100 x 75 x 65 mm each 0.00 2.00 0.00 0.00 2.00

B51 Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 135 x 75 x 65 mm each 0.00 2.00 0.00 0.00 2.00

B52 Supplying PVC flexible conduit pipe ....mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated complete. 25 mm m 0.00 50.00 0.00 0.00 50.00

B53 Supplying And Fixing Metal Fan Box with Round Hook. no 0.00 4.00 0.00 0.00 4.00

B54 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. a) Short point up to 3Mtr from tapping point to out let via switch box point 26.00 6.00 0.00 8.00 40.00

B55 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. b) Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch box point 20.00 6.00 0.00 8.00 34.00

B56 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.( 4/9) - II. Point wiring using class B Materialsc) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box point 18.00 6.00 0.00 3.00 27.00

B57 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201 1.5 sqmm m 50.00 300.00 0.00 13.00 363.00

B58 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201 2.5 sqmm m 60.00 200.00 0.00 50.00 310.00

B59 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201 4 sqmm m 0.00 250.00 0.00 50.00 300.00

B60 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201 6 sqmm m 0.00 200.00 0.00 50.00 250.00

B61 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-2Way each 0.00 5.00 0.00 2.00 7.00

B62 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way each 0.00 5.00 0.00 1.00 6.00

B63 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8Way each 0.00 2.00 0.00 1.00 3.00

B64 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way each 0.00 2.00 0.00 1.00 3.00

B65 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 16Way each 0.00 2.00 0.00 1.00 3.00

B66 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 1 to 2 Module each 0.00 5.00 0.00 3.00 8.00

B67 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 6 Module each 0.00 5.00 0.00 3.00 8.00

B68 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 8 Module each 0.00 5.00 0.00 3.00 8.00

B69 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 10-12 Module each 0.00 2.00 0.00 3.00 5.00

B70 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 16 Module. each 0.00 2.00 0.00 0.00 2.00

B71 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch Each 0.00 10.00 0.00 4.00 14.00

B72 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch Each 0.00 2.00 0.00 0.00 2.00

B73 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket Each 0.00 2.00 0.00 5.00 7.00

B74 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module Each 0.00 4.00 0.00 0.00 4.00

B75 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch Each 0.00 2.00 0.00 10.00 12.00

B76 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Bell Push Each 0.00 2.00 0.00 0.00 2.00

B77 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch Each 0.00 2.00 0.00 3.00 5.00

B78 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket Each 0.00 2.00 0.00 6.00 8.00

B79 Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws. sq cm 0.00 500.00 0.00 0.00 500.00

B80 Extra for supplying 4 mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using necessary machine screws. 80/90 mm. Nos 0.00 5.00 0.00 0.00 5.00

B81 Extra for supplying 4 mm thick white plastic plate andcovering for junction boxes of size ...... mm conduit using necessary machine screws. 110 mm. Nos 0.00 5.00 0.00 0.00 5.00

B82 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32A SP Each 0.00 1.00 0.00 1.00 2.00

B83 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50-63 A SP Each 0.00 1.00 0.00 1.00 2.00

B84 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 A TPN. Each 0.00 1.00 0.00 0.00 1.00

B85 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50-63 A TPN Each 0.00 1.00 0.00 0.00 1.00

B86 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.II - Double Door.12 Way SP & N Each 0.00 1.00 0.00 1.00 2.00

B87 Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB)240/450V upto 300mA sensitivity on existing wood/ panel board.16-25 A 2 pole Each 0.00 1.00 0.00 0.00 1.00

B88 Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB)240/450V upto 300mA sensitivity on existing wood/ panel board.63 A 4 pole Each 0.00 1.00 0.00 0.00 1.00

B89 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 15" Sweep (450mm) each 0.00 1.00 0.00 0.00 1.00

B90 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system 48" Sweep (1200mm) Regular model each 0.00 4.00 0.00 2.00 6.00

B91 Supplying wall mounting fan suitable to operate at single-phase 230v AC supply. 400 mm Sweep each 0.00 2.00 0.00 0.00 2.00

B92 Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4ft - 36/40 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition each 0.00 6.00 0.00 0.00 6.00

B93 Fixing all types and all capacities of fluorescent /falseceiling/ spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twintwisted PVC insulated wires, required Nos of round blocks and clamps. On wall/ ceiling / Rafter / Girders. each 0.00 6.00 0.00 5.00 11.00

B94 Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. each 0.00 4.00 0.00 2.00 6.00

B95 Extra length of GI pipe of class B 19mm dia for down rod. m 0.00 4.00 0.00 0.00 4.00

B96 Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame each 0.00 1.00 0.00 0.00 1.00

B97 Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia. Job 1.00 1.00 0.00 2.00 4.00

B98 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications cum 224.85 0.00 171.44 62.50 458.79

B99 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates- (50% considered for Form work) cum 0.00 0.00 1.79 2.28 4.07

B100 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In ordinary/soft rock Depth exceeding 1.5 m, but not exceeding 3 m cum 0.00 0.00 0.00 384.01 384.01

B101 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - (10% cosidered for Form work) cum 0.00 0.00 0.00 10.42 10.42

B102 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (60% considered for Form work) Ground Floor cum 5.92 0.00 0.00 4.63 10.55

B103 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (45% considered for Form work) cum 0.00 0.00 0.00 3.00 3.00

B104 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (5% considered for Form work) cum 0.00 0.00 0.00 0.20 0.20

B105 Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner as per direction of incharge V2/Pg29/7.46) sqm 0.00 0.00 0.00 39.00 39.00

B106 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. sqm 0.00 0.00 0.00 40.00 40.00

B107 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. kg 0.00 0.00 0.00 95.00 95.00

B108 Providing and fixing double action hydraulic floor spring of approved brand manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge: With brass cover plate minimum 1.25 mm thickness including cost of materials, labour, usage charges of machinery complete as per specifications. each 0.00 0.00 0.00 1.00 1.00

B109 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of ngineer-in charge: Pre-laminated particle board with decorative lamination on both side and balancing lamination on other side including cost of materials, labour, usage charges of machinery complete as per specifications. sqm 0.00 0.00 0.00 1.00 1.00

B110 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/m²) including cost of materials, labour, usage charges of machinery complete as per specifications. sqm 0.00 0.00 0.00 10.00 10.00

B111 Providing and fixing aluminium tubular handle bar 32 mm outer dia,3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.: Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar including cost of materials, labour, usage charges of machinery complete as per specifications. No 0.00 0.00 0.00 3.00 3.00

B112 Providing and fixing bright finished brass butt hinges with necessary screws etc. Complete-125x85x5.5 mm (heavy type). No 0.00 0.00 0.00 6.00 6.00

B113 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10mm each 0.00 0.00 0.00 4.00 4.00

B114 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of ngineer-in charge: Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side including cost of materials, labour, usage charges of machinery complete as per specifications. sqm 0.00 0.00 0.00 4.00 4.00

B115 Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540- F & ISO 11600 Upto 20 mm depth and 20 mm width including cost of materials, labour, usage charges of machinery complete as per specifications. m 0.00 0.00 0.00 40.00 40.00

B116 Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete including cost of materials, labour, usage charges of machinery complete as per specifications (V2/Pg93/11.47) No 0.00 0.00 0.00 4.00 4.00

B117 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. No 0.00 0.00 0.00 6.00 6.00

B118 Providing and fixing sliding window lock, ISI marked, transparent or dyed to required colour or shade, with necessary screws etc. Complete (Market rate) No 0.00 0.00 0.00 6.00 6.00

B119 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. with both side prelam. sqm 0.00 0.00 0.00 4.00 4.00

B120 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications.) cum 0.00 0.00 0.00 0.10 0.10

B121 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.--do- 30 mm thick both side commercial composite polymer laminated sal wood shutter. sqm 0.00 0.00 0.00 3.50 3.50

B122 Supplying, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work site, caulking with hemp dipped in tar and jointing with CM 1:1.5 using OPC, perfect linking and curing for 10 days and testing with water etc. with all lead, lifts and as per Technical Specifications. The cost to include the cost of all jointing materials, necessary survey works for laying of sewer lines etc. complete. The contractor will make own arrangements for procuring water for testing 150 mm dia. pipes. m 0.00 0.00 0.00 50.00 50.00

B123 Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For Heavy Duty GI pipe of 20mm dia. m 0.00 0.00 0.00 50.00 50.00

B124 Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For Heavy Duty GI pipe of 25mm dia for CRB m 0.00 0.00 0.00 50.00 50.00

B125 Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For Heavy Duty GI pipe of 50mm dia for CRB m 0.00 0.00 0.00 50.00 50.00

B126 Providing and fixing PTMT stop cock of approved quality and colour 20 mm nominal bore, 89 mm long, weighing not less than 88 g (V.2 I.No. 13.18.2, P.No. 118) No 0.00 0.00 0.00 4.00 4.00

B127 Providing and fixing PTMT stop cock of approved quality and colour 15 mm nominal bore, 86 mm long, weighing not less than 88 g (V2/Pg120/13.18.1) No 0.00 0.00 0.00 4.00 4.00

B128 Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. (V5/Pg90/9.1.3) HDPE Grade PE80-PN6.0 - 90mm dia m 0.00 0.00 0.00 10.00 10.00

B129 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 50mm dia., 6 kg/sqcm & class 3 m 0.00 0.00 0.00 15.00 15.00

B130 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 63mm dia., 6 kg/sqcm & class 3 m 0.00 0.00 0.00 15.00 15.00

B131 Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete. Work shall be carried out as per the instructions of Engineerin-charge of works as per the standard procedure. sqm 0.00 0.00 0.00 1000.00 1000.00

B132 Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey. RCC NP3 Class pipe of 300 mm dia. m 0.00 0.00 0.00 60.00 60.00

B133 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switches box. point 0.00 0.00 0.00 4.00 4.00

B134 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Three outlet in a row, above 6Mts up to 10Mtr from tapping point to out let via switches box. point 0.00 0.00 0.00 4.00 4.00

B135 Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3854. 6A 2 Way. each 0.00 0.00 0.00 2.00 2.00

B136 Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3854. 6A 3/5 Way. each 0.00 0.00 0.00 2.00 2.00

B137 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/ Telephone Socket. each 0.00 0.00 0.00 3.00 3.00

B138 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way. each 0.00 0.00 0.00 4.00 4.00

B139 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 4 Module each 0.00 0.00 0.00 3.00 3.00

B140 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting etc., Made out of 14 SWG MS enclosur - Double Door 6 Way SP &N. each 0.00 0.00 0.00 1.00 1.00

B141 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40 Amps 4 pole. each 0.00 0.00 0.00 1.00 1.00

B142 Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable 2Pair. m 0.00 0.00 0.00 1.00 1.00

B143 Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990. 3 core 10sqmm. m 0.00 0.00 0.00 5.00 5.00

B144 Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 4 core 6 sqmm. m 0.00 0.00 0.00 5.00 5.00

B145 Supply and laying double walled corrugated (DWC) HDPE Pipe including all necessary connecting Sockets/Couplings/Tees/ Bends/ End-caps of same materials in exisiting trench as per IS 14930 part -II suitable for drawing under ground cables.(73/19) - m) 90mm OD / 76mm ID. m 0.00 0.00 0.00 7.50 7.50

B146 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 95 sqmm Long Barrel. each 0.00 0.00 0.00 2.00 2.00

B147 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes - 150 sqmm Long Barrel. each 0.00 0.00 0.00 2.00 2.00

B148 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm alround with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. No 0.00 0.00 0.00 1.00 1.00

B149 GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm copper plate. Each 0.00 0.00 0.00 10.00 10.00

B150 Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. Copper wire. c) 8 SWG m 0.00 0.00 0.00 10.00 10.00

B151 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50x50x6mm. m 0.00 0.00 0.00 10.00 10.00

B152 Supplying, fixing and wiring 0 to 600Volts 96x96mm AC Voltmeter on existing panel/wood board. Each 0.00 0.00 0.00 2.00 2.00

B153 Supplying, fixing and wiring 0 to 1500amps CT operated AC analog type Ammeter With out CT. Each 0.00 0.00 0.00 2.00 2.00

B154 Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired. Each 0.00 0.00 0.00 4.00 4.00

B155 Supplying, fixing and wiring rotary selector switch suitable for Ammeter. Each 0.00 0.00 0.00 4.00 4.00

B156 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer class 0.5 accurecy with Tape Wound. Each 0.00 0.00 0.00 4.00 4.00

B157 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440v A.C. 50 Hz 12/24v D.C Each 0.00 0.00 0.00 2.00 2.00

B158 Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary botls,nuts and washers etc., complete. 600Amps 4x75x10mm Alluminium Strips. m 0.00 0.00 0.00 5.00 5.00

B159 Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. All kinds of soils. Depth upto 1.50 m cum 0.00 0.00 0.00 50.00 50.00

B160 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/manual reset facility suitable to mount on DIN rail/ flush mounting on panel board. Each 0.00 0.00 0.00 1.00 1.00

B161 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism THREE POLE 200Amps 36kA. Each 0.00 0.00 0.00 1.00 1.00

B162 Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS-13947 - 125Amps. Each 0.00 0.00 0.00 1.00 1.00

B163 SSupply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT > 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency>1301m/w, nominal CRI >75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Source.40Watts. Each 0.00 0.00 0.00 2.00 2.00

B164 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete - 16SWG. sqcm 0.00 0.00 0.00 300.00 300.00

B165 Supplying of recess mounting non integrated type LED down light 18W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT 6500 degree K, CRI> 70%. efficacy >100 lumen per W, 120degree beam spread, life> 25000 burning hours and Compliance to IS10322/ IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LED's are driven by HF electronic driver integrated in a separate control gear assembly., with PF > 0.95, power loss should< 5% of lamp Wage, short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. Each 0.00 0.00 0.00 4.00 4.00

B166 Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4ft - 36/40 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition Each 0.00 0.00 0.00 6.00 6.00

B167 Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 2ft - 9/10 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition Each 0.00 0.00 0.00 3.00 3.00

B168 Supply of round/square recess/surface mounted rolling type LED Down light withLED square or round down light 5-6W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V @50/60Hz & Power factor >0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition. Each 0.00 0.00 0.00 3.00 3.00

B169 Supplying and Fixing of ---- mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wall using suitable clamps, bolts, and nuts and wiring using suitable capacity wires. Using 32mm dia G.I.Pipe. Each 0.00 0.00 0.00 1.00 1.00

B170 Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/s for .......m Pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom ..... mm , top.... mm with 3 mm thick, suitable base plate and 4Nos of ..... long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended. 3 m - Top 70 mm and Bottom 130 mm dia. Each 0.00 0.00 0.00 1.00 1.00

B171 Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires. Each 0.00 0.00 0.00 5.00 5.00

B172 Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. sqm 0.00 0.00 0.00 28.00 28.00

B173 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling, water,all materials,usage& all other appurtenaces required to complete the work. cum 921.13 0.00 0.00 0.00 921.13

B174 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20mm nominal size graded crushed coarse aggregate (35% considered for Form work) cum 131.32 0.00 0.00 0.00 131.32

B175 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - cum 13.72 0.00 0.00 0.00 13.72

B176 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates cum 6.32 0.00 0.00 0.00 6.32

B177 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates. sqm 514.64 0.00 0.00 0.00 514.64

B178 Providing and Laying RCC Hume pipe sub ducts using NP 2 class 300mm dia Hume pipe including cost of Excavation, laying charges and back filling wherever required as per technical specification and enclosed drawings including cost of all materials, labour, etc., complete. m 25.00 0.00 0.00 0.00 25.00

B179 Filling approved earth (excluding rock) in trenches, plinth, sides of foundationsand other similar works etc. in layers not exceeding 20cm in depth, consolidatingeach deposited layer by ramming and watering, lead up to 50 m and lift upto1.5 m. cum 21.40 0.00 0.00 0.00 21.40

B180 Earth work excavation by manual means for drains, canals, waste weir draft, approach channels, key trench, foundation of Buildings & Bridges and such similar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. cum 48.47 0.00 0.00 0.00 48.47

B181 Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry complete. sqm 41.25 0.00 0.00 0.00 41.25

B182 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. sqm 2.70 0.00 0.00 0.00 2.70

B183 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. cum 0.12 0.00 0.00 0.00 0.12

B184 Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications sqm 2.52 0.00 0.00 0.00 2.52

B185 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201 1.0 sqmm m 70.00 0.00 0.00 0.00 70.00

B186 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Bricks/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete 3 Way each 8.00 0.00 0.00 0.00 8.00

B187 Supplying 6 A flush type socket and 6 Amps flush type SP switch either surface / flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 6 Amps 3/5 Way. each 26.00 0.00 0.00 0.00 26.00

B188 Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm as required -20mm. m 50.00 0.00 0.00 0.00 50.00

B189 Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm as required -25mm. m 40.00 0.00 0.00 0.00 40.00

B190 Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm as required -30mm. m 35.00 0.00 0.00 0.00 35.00

B191 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A SP Switch No 16.00 0.00 0.00 0.00 16.00

B192 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A Three Way 5 Pin Socket. No 4.00 0.00 0.00 0.00 4.00

B193 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Three pin socket. No 4.00 0.00 0.00 0.00 4.00

B194 Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. ( The cost of PCC shall be paid extra) 300X250X100 mm size. m 50.00 0.00 0.00 0.00 50.00

B195 Providing and fixing MS gate using structural steel pipes, angles, flats, rods of different sizes for structural work including straightening, cutting, bending, welding the joints, etc., including grinding, for smooth finishing, transportation, etc., complete to the work spot including two coats of approved quality of enamel painting over one coat of shop painting, etc., complete as per the directions of the Engineer-in-charge of the work kg 500.00 0.00 0.00 0.00 500.00

B196 Supplying and spraying antiweed chemical to jelly spreading area including labour charges, jungle cutting, material, transportation,crushing of existing jelly HOM of machineries etc complete No 1.00 0.00 0.00 0.00 1.00

B197 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth. cum 284.21 0.00 0.00 0.00 284.21

B198 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock Depth exceeding 1.5 m, but not exceeding 3 m. cum 40.63 0.00 0.00 0.00 40.63

B199 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In hard Rock ( requiring blasting) Depth upto 1.50m. cum 40.63 0.00 0.00 0.00 40.63

B200 Yard leveling: Compacting Original Ground Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density asgiven in Table 300-2 for embankment construction. cum 1000.00 0.00 0.00 0.00 1000.00

1) The land will be handed over " As is where is condition".

Place Designation

Name of the company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-5 COMMERCIAL DEVIATION

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

Please fill Only in the Light Blue Couloured Cell.

Please key in the SlNo.,Section , Clause , Description as given in bid sheets and finally your Statement of Deviation/Variations.

This Sheet would be opened at the Techno-Commercial Opening. Please refer Vendor Manual attached for further details.

For any further assistance for submitting your bids please call up KPTCL Office.

We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)

We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)

We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)

If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.

Bidder's Name & Address alongwith GSTIN no. :

TO, The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

I/we have read each of the Clauses mentioned in INVITATION FOR TENDERS , INSTRUCTION TO TENDERERS , CONDITIONS OF CONTRACT, SPECIAL CONDITIONS OF CONTRACT and COMMERCIAL TERMS AND CONDITIONS and all the sections of Bid documents.

The following are the commercial Deviations and Variations from and exceptions to the Specifications and documents for

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

These deviations and variations are exhaustive. Except these deviations, the entire work shall be performed as per your specifications and documents.

Sl. NO. SECTION CLAUSE NO. DESC. AS PER SPECIFICATION STATEMENT OF DEVIATIONS/VARIATIONS

Note : Deviations specified elsewhere in the specification will not be considered.

Place Designation

Name of the company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-6 : TECHNICAL DEVIATION

SHEET FOR TECHNO-COMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

Please key in the SlNo., Section , Clause , Description as given in Bid sheets and finally your Statement of Deviation/Variations.

This Sheet would be opened at the Techno-Commercial Opening.

For any further assistance for submitting your bids please call up KPTCL office. Please fill only in the blue coloured cells.

We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)

We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)

We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)

If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.

Bidder's Name & Address alongwith GSTIN no. : TO,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

The following are the Technical Deviations and Variations from and exceptions to the Specifications and documents for

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

These deviations and variations are exhaustive.Except these deiviations and variations, the entire work shall be performed as per your specification and documents.

Sl. NO. SECTION CLAUSE NO. DESC. AS PER SPECIFICATION STATEMENT OF DEVIATIONS/VARIATIONS

Note : Deviations specified elsewhere in the specification will not be considered.

Place Designation

Name of the company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE 7(List of special tools and tackles )

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bidder's Name & Address alongwith GSTIN no. : TO,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

List of special tools and tackles the price of which is included in bid price.

Sl. No. For equipment Description of item Unit Quantity

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

NOTE: 1 ) SHALL BE UPLOADED WITHOUT PRICES

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

We have uploaded with our proposal the following additional information.

Sl. No. Brief Description of information Ref. and Page No.

Place Designation

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (1 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

BIDDER'S NAME AND ADDRESS:

a) * We have submitted bid as individual Bidder. (Key in Individual Bidder ) The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

b) * We have submitted bid in Consortium with the following Bidders. (Key in Consortium )

Name of Consortium Partner Scope / Participation of each Consortium / Joint Venture Partner

(* Fill-up whichever is applicable)

1.0 GENERAL INFORMATION

The Bidder, bidding for this package are requested to complete the information in the following form.

Sl. No. Particulars Bidder Details

1 Name of the Firm

2 Address of Head Office / Registered Office GST no.

5 Name of Contact person with Designation

6 Place of Incorporation/Registration

7 Year of Incorporation/Registration

8 Constitution or legal status of Tenderer [Upload copy]

9 Place of Registration [Upload copy]

10 Principal place of business

2.0 We are furnishing the following details/documents in support of Qualifying requirement for above mentioned project

Sl.No. Bidder Details Indicate Yes/No For individual Bidder In case of Consortium :

Lead Bidder Consortium partner

(a) Written power of attorney of the signatory on the bid to commit the bidder.

1 Uploaded / Not

(b) Certificate of Registration of the Company. Please mention the date of incorporation of the company

1 Uploaded / Not

(c ) Valid Super Grade Electrical Contractor’s License issued by the Government of Karnataka as on the date of techno commercial Bid opening. Please mention the date of expiry of the License certificate issued by GOK/ Undertaking to this effect

1 Uploaded / Not

(d) Self declaration regarding Litigation w.r.t KPTCL contracts over the last five years (refer IFT)

1 Uploaded / Not

(e) Self declaration for ‘not being disqualified regarding non-performance in any of the Government utilities in the past five years’. (refer IFT)

1 Uploaded / Not

(f) An undertaking to source the supply of equipment/ material from KPTCL approved vendors only as per QR for Vendor registration, available in the KPTCL website ie., kptcl.karnataka.gov.in, Link Tender and Procurement-Application for Vendor.

1 Uploaded / Not

(g) Self declaration regarding no action against the bidder have been taken by KPTCL in respect of Risk & Cost clause

1 Uploaded / Not

(h) Self declaration regarding 'Eligibility clauses in respect of restrictions on procurement from a bidder of a country which shares a land border with India as per Annexure-XVI

1 Uploaded / Not

(i) Self declaration regarding RESTRICTIONS ON SOURCING OF EQUIPMENTS/MATERIALS BY THE BIDDER FROM A VENDOR OF A COUNTRY WHICH SHARES A LAND BORDER WITH INDIA as per Annexure -XVII

1 Uploaded / Not

Section 3 : 1.3 Work performed of similar nature in the last Ten years of Bidder as per Clause No: 3.2 (b) (i) of ITT of Bidder/Lead Bidder and 2.2(I) of ITT of Consortium Partner.

Project Name Name & Address of the Employer Description of Work Voltage class Number of Sub-Stations/TBs/Augmentation/Replacement works Contract Number Value of contract Rs. Lakh Date of issue of work order Specified period of completion Actual date of commissioning Remarks explaining reasons for delay in commisioning of work

Name of Consortium Partner

Note : 1 . The documentary proof of fulfilling the qualifying requirements shall be uploaded along with the bid. The bidder shall upload the P.O,LOI/LOA, DWA, Work done, Performance Certificates issued by the end users not below the rank of Executive/ Divisional Engineer along with the bid.

2. The qualifying experience of the Bidder who is having qualifying experience shall be furnished in the above performa and Documentary Proof in support of above shall be uploaded in the form of certificates issued by authorized officers of concerned organisations.

3. IF this sheet is insufficient for furnishing the qualifying experience of the Bidder then similar sheets shall be seperately uploaded.

4. In case of work executed under a contract that had been awarded on a joint venture, the experience of individual joint venture partner shall be considered limited to the scope of that partner under the said contract. The copy of the agreement executed with awarding agency shall be uploaded as proof of the same

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (2 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

BIDDER'S NAME AND ADDRESS: TO,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

Section 3 : 1.5 Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender of a Bidder

(A) Existing commitments and on-going works:

Description of work Place & State Contract No & Date Name and Address of Employer Value of contract (Rs. Lakh) Stipulated period of cof Completion Value of works remaining to be completed ( Rs.Lakhs) (Attach Certificates from Engineers –in- Charge) Anticipated date of commissioning

Ex-Works GST Total(Ex-works+GST)

Name of the Consortium Partner

Note:Attach Certificates from Engineers –in- Charge

B)Works for which Tenders already submitted

Description of work Place & State Name and Address of Employer Estimated value of works (Rs. Lakh) Stipulated period of Completion Date when decision is expected Remarks if any

Ex-works GST Total(Ex-works+GST)

Name of the Consortium Partner

i) The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. OR The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be verified and certified by Chartered Accountant/ Cost Auditor. However, the Bidder has to upload the PO/Work Award copies for existing commitments and on-going works

ii) A self-declaration is to be uploaded by the bidder of both Lead Bidder & Consortium Partner (in case of Consortium) stating that "the information with regard to assessed available tender capacity (Works on Hand) furnished are correct”.

iii. Bidders shall furnish Certificate from Chartered Accountants for split details of Ex-works values and GST of Contract values of the works in the prescribed format as at Clause No. 1.5 of Section-3: Qualification Information of both Lead Bidder & Consortium Partner (in case of Consortium).

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (3 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

BIDDER'S NAME AND ADDRESS: TO,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

Following is the list of major supplied subsation equipments/accessories which are type tested and designed, manufactured by us in accordance with internationally recognised standards.

Sl. No. Item rating, type and Designation Qty Customer Date of Order Date of Supply Date of Commissioning Ref. of Cusomer's certificate of successful operation enclosed Ref. of layout & Customer's certificae for successful commission

Note: Documentary Proof in support of above shall be uploaded in the form of certificates issued by authorized officers of concerned organisations. .

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (4 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bidder's Name & Address alongwith GSTIN no. : To

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

Section 3 : 1.7 Reports on the financial standing of the tenderer, such as Profit and Loss Statements and Auditor’s reports in the preceeding last five years, Audited Financial statements i.e Balance sheets, P&L statements, Turnover certificates duly certified by chartered Accountant as documentary evidence shall be uploaded.

SLNo. Particulars Year Bidder Consortium Member

Mention Year Turnover excluding GST (in Rs.) GST Amount (in case GST is included in Turnover) (in Rs.) Turnover including GST (in Rs.) Mention Year Turnover excluding GST (in Rs.) GST Amount (in case GST is included in Turnover) (in Rs.) Turnover including GST (in Rs.)

Names of the constituent Firm

1 Annual turn over for the last Five years Year(1) 2020-21 2020-21

2 Liquid Assets / Credit availability or access to evidence of assets

3 Whether Audited Balance sheets and Profit & Loss statement are enclosed for the last Five Years ? (yes/No)

4 Whether Bankers certificate enclosed for credit facilities? (Yes/No)

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (5 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

BIDDER'S NAME AND ADDRESS: TO,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

The information to be filled in by the Tenderer hereunder will be used for purposes of computing Tender capacity as provided for in Clause 3 of the Instructions to Tenderers. This information will not be incorporated in the Contract.

Lead Bidder Consortium partner

1.1 Constitution or legal status of Tenderer [Upload copy] Attach Copy

Place of Registration [Upload copy]

Principal place of business

Section - 3: 1.2 Total value of works executed (KPTCL & NON KPTCL works) and payments received in the last Five years (in Rs. Lakhs)

1.2 Total value of works executed (KPTCL & NON KPTCL works) and payments received in the last five years (in Rs. Lakhs) of both Lead Bidder & Consortium partner (in case of Consortium) Financial Year KPTCL works Non KPTCL works

Individual Bidder In case of Consortium Individual Bidder In case of Consortium

Total value of works in Rs. Lakh Lead Bidder Consortium Partner Total value of works in Rs. Lakh Lead Bidder Consortium Partner

Total value of works in Rs. Lakh Total value of works in Rs. Lakh Total value of works in Rs. Lakh Total value of works in Rs. Lakh

Note: Attach relevant Certificate/s from Chartered Accountant.

Section 3: 1.9 Name, address, telephone number & e-mail id of the Tenderers' bankers who may provide references if contacted by the Employer:

1.9 Sl.No Name, address, telephone number & e-mail id of the Tenderers' bankers

Section 3: 1.12 Information on litigations in which the Tenderer(Lead and Consortium Partner(in case of Consortium) is involved:

Other Party(ies) Employer Details of Dispute Amount involved Remarks showing Present Status

Consortium Partner

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-10 (1 of 3) Details of Tools and Plants available

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

BIDDER'S NAME AND ADDRESS: To

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

Following are the details of the Tools and Plants available with us.

Sl. No. Description Quantity Make Present Location / Project Remarks (if any)

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE 10 (2 of 3) Details of Technical staff employed

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

BIDDER'S NAME AND ADDRESS: To

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

Section 3: 1.8 Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Sl. No. Name of the employee Designation Branch (Degree/Diploma) Year of Passing Since when employed in erection division Past Experience

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE 10 (3 of 3 )

SHEET FOR TECHNOCOMMERCIAL OPENING

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

BIDDER'S NAME AND ADDRESS:

We propose the following deployment of manpower for the substation and Line package.

Sl. No. Category MONTHS AFTER PLACEMENT OF AWARD LETTER

1 Project manager

2 Sr. Project Manager

5 Skilled labour

6 No skilled labour

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-11 (A) : COMPLETION SCHEDULE FOR STATION/TERMINAL BAYS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bidders Name and Address: To,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

We hereby declare that following schedules shall be followed by us for the above work. The period of various activities from the date of placement of award letter shall be as follows

SL.NO Activity STATION PORTION

Commencement Completion

1 Detailed engineering

2 Procurement of bought out items / raw materials

3 Manufacturing & Testing

5 Setting up of site office, Sheds & stores etc.

7 Concreting for

a)Structure Foundations

b)Equipment and mounting structure foundadions

c)Cable trenches

2. Installation

8 Receipt(at site) of

a)Main equipment / spares

c)Insulators & Hardwares

d)Clamps & Connectors

e)Marshalling kiosks

f)Cables & Cabling Materials

a)Main structures

b)Equipment support structures

10 Equipment Erection

12 Bus bar erection

15 Completion of testing and ready for commissioning

16 Commissioning

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-11B : COMPLETION SCHEDULE FOR TRANSMISSION LINES

SHEET FOR TECHNOCOMMERCIAL OPENING

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Bidders Name and Address: To,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

We hereby declare that following shedules shall be followed by us for the above work. The period of various activities from the date of placement of award letter shall be as follows.

SL.NO Activity Construction of Transmission Line

Commencement Completion

1 Submission of Drawings

2 Completion of detailed engineering

3 Commencement of Manufacturing

4 Completion of Manufacturing VOID

5 Readiness for testing

6 Readiness for Shipment

7 Receipt at Site

8 Completion of Shipment

1 Detailed Survey

2 Setting up of site office, sheds and stores etc.

3 Exacavation for foundations.

4 Foundations and other Civil Works

5 Erection of Tower alongwith accessories

6 Stringing of conductor/ groundwire alongwith accessories

7 Testing , Commissioning and Handing over.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 12 TYPE TESTS & TEST CHARGES OF EQUIPMENT/MATERIALS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

BIDDERS SHALL INDICATE VARIOUS TYPE TESTS IN LIGHT BLUE COLOURED CELLS

ALL THE TYPE TESTS APPLICABLE FOR EACH OF THE EQUIPMENTS SHALL BE INCLUDED.

Bidders Name and Address To,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhan Bhavan, BANGALORE - 560009

SL.No Details of Equipments Type Test Test Charges ( in Rs )

1 Power Transformers:

2 SF6 Circuit Breakers:

a)145kV Class b) 33kV Class

3 Surge Arrestors

5 Control & Relay Panels / Relay & Protection Panels

6 L.T. A.C Panel

7 Station Battery

8 Station Battery Charger

9 1.1KV Power Cables

10 1.1kV Copper Control cables

11 11kV U.G Cable

12 Insulators a) 90KN Disc Insulator Strings

13 Equipment / Station Structures

14 Aluminium pipe and Clamps

15 Hardware Materials

16 Yard lighting equipments

17 Fire Fighting equipments

18 AC DISTRIBUTION BOX

19 DC DISTRIBUTION BOX

21 Auxiliary Transformer

NOTE: The Type Test / Special Tests, if repeated at the insistance of owner, the applicable testing charges shall be paid by the successful Bidder upfront to the laboratory and the same shall be reimbursable by KPTCL as per actuals on submission of Bills along with proof of payment and on successful completion of all the Type Tests, specified and on approval of the same by the owner. In case equipment/material fails in the type tests during testing then the testing charges paid by the Bidder to the laboratory will not be reimbursed by KPTCL. The above Clause is applicable for all the equipments/materials, in case, the Type Test / Special Tests, are repeated at the insistance of owner(KPTCL).

Place Printed Name

Karnataka Power Transmission Corporation Limited

Schedule -13-List of Optional Spares

SHEET FOR TECHNOCOMMERCIAL OPENING

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

BIDDERS SHALL NOTE THAT QUANTITIES INDICATED IN THE ITEM_WISE FINANCIAL BID OFFER SHALL BE INDICATED HERE ALSO.

Bidders Name and Address

To, The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

List of optional spares required to meet the specified performance for a period of three years

Sl. No. For Equipments Details of item Unit Quantity

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 14-Guaranteed Losses :

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bidders Name and Address along with GSTIN No.: To,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

Dear Sir, i) We Declare that the ratings and performance figures of the transformer furnished by us under the Turnkey Package are Guaranteed. We further declare that in the event of any deficiencies in meeting the guarantees in repect of the characteristics mentioned below as established after conducting the factory test, you may at your discretion,reject or accept the equipment after assessing the liquidated damages as specified in relevant clause of Bid Document.

Equipment Guaranteed Losses at rated output(KW)

Max No Load loss at rated voltage and rated frequency Max Load loss at rated current and frequency and at 75 deg C at principal tap Max I2 R loss at rated current and frequency and at 75 deg C at principal tap Max Auxiliary loss at rated voltage and frequency for Power Transformer

20MVA, 110/33-11kV Power Transformer

Note:(i) Refer Technical Specifications (ii)The loss quoted shall be consistent in Schedule 14 and GTPs(DRS)of Power Transformer

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

LIST OF VENDORS

SHEET FOR TECHNOCOMMERCIAL OPENING

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

BIDDERS NAME AND ADDRESS To, The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

Sl. No. EQUIPMENT/ MATERIAL NAME OF THE VENDOR

VENDOR 1 VENDOR 2 VENDOR 3 VENDOR 4

1 Power Transformer 20MVA, 110/33-11kV Transformer

2 SF6 Circuit Breakers: 145kV

3 SURGE ARRESTERS

4 Control & Relay Panels / Relay & Protection PANELS

5 Station / Equipment Support structures

6 Aluminium pipe and Clamps

7 ACSR CONDUCTOR

9 Solid Core Insulator

10 Disc Insulator Strings

11 Insulator Hardware Clamps & Power connectors

12 Auxiliary Transformer

14 1.1kV POWER CABLES

15 AC DISTRIBUTION BOX

16 DC DISTRIBUTION BOX

18 BATTERY CHARGER

19 CONTROL CABLES

20 11KV Switchgear

21 11kV UG CABLE

22 FIRE FIGHTING EQUIPMENTS

23 Illumination Equipments / Fixtures

25 Tower Accessories

26 Insulator Hard Wares

27 Conductor Accessories

28 Earth Wire Accessories

Note : Any Other Materials name & its vendors are to be entered.

Place Designation

Name of the Company

SCHEDULE-16 : NO DEVIATION CERTIFICATE (ANNEXURE-I)

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED

With reference to our Bid Proposal No dated

We hereby confirm that we have read the provisions of the contract, the stipulation of these clause are acceptable to us,

and we have not taken any deviation whatsoever to these clauses:

a) Terms of payment Clause No. 37 of Section-5,Conditions of Contract (CC) and Clause No.8 of Special Conditions of Contrac (SCC)

b) EMD/Bid Security Clause No. 6, Section :1, Invitation for Tenders (IFT) and Clause No. 13, Section :2, Instruction to Tenderer (ITT)

c) Contract Performance Guarantee Clause No. 29 of Section:2, Instruction to Tenderers (ITT).

d) Penalty for delay Clause No. 41 of Section-5 : Conditions of Contract (CC).

e) Price Basis/ Price adjustment Clause No. 40 of Section-5 :Conditions of Contract (CC).

f) Defects Liability Period/Guarantee Clause No. 10 of Section-5 Special Conditions of Contract (SCC)

g) Work Schedule Clause No.17 of Section:5 Conditions of Contract (CC)

h) Taxes and Duties Clause No. 11.11 of Section-2: Instruction to Tenderers (ITT).

We further confirm that any deviation to the above clauses at SI.No. (a) to (h) found anywhere in our bid proposal, implicit or explicit, shall stand unconditionally withdrawn, without any cost implication whatsoever to KPTCL.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE-17a FORM FOR BID SECURITY/EMD (ANNEXURE-II) (To be stamped on Rs.300/- Non-Judicial stamp paper in accordance with KPTCL Circular No. KPTCL/GMT/CIVIL (B7)/35/2024-MANAGER ESTATE (E-106992) dated 02.03.2024)

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED AND SENT ALONG WITH ORIGINAL BANK GUARANTEE AND ORIGINAL DD (TOWARDS BID GUARANTEE ) TO CHIEF GENERAL MANAGER (TECH),KPTCL BANGALORE SO AS TO REACH AFTER THE LAST SUBMISSION DATE & ON OR BEFORE THE DATE & TIME OF OPENING TECHNO COMMERCIAL BIDS.

Ref No. Bank Guarantee No.

In accordance with Invitation to Bid under your specification

No. M/s having its Registered /

Head Office at (hereinafter called the 'Bidder') wish

to participate in the said Bid or and you, as a special favour have agreed

to accept an irrevocable and unconditional bank guarantee for an amount of

valid up to on behalf of Bidder in lieu of the Bid deposit required to be made

by the Bidder as a condition predecent for participation in the said Bid,in addition to the Demand draft No.

we the Bank at having our Head office at

(local address) guarantee and undertake to pay immediately on demand by Karnataka Power Transmission Corporation

the amount of (in figures and words)

without any reservation, protest, demur and recourse. Any such demand made by said `Owner' shall be conclusive and binding on us irrespective of any dispute or difference raised by the Bidder.

This Guarantee shall be irrevocable and shall remain valid up to and including

If any further extension of this guarantee is required, the same shall be extended to such required period (not exceeding one year) on receiving instructions

from M/s on whose behalf this guarantee is issued.

This Guarantee has been issued using SFMS Platform and the requisite communication in this regard has been forwarded to the Beneficiary Bank.

In witness whereof the Bank, through its authorised officer, has set its hand and stamp on this

Signature Signature

Official Addressess Designation with Bank Stamp.

Attorney as per Power of Attorney No.

Note : 1) Both the Bank Guarantee and Demand Draft shall be scanned and uploaded along with Electronic sheets. 2) This date shall be Forty Five (45) days after the last date for which the bid is valid.

Karnataka Power Transmission Corporation Limited

SCHEDULE-17b FORM FOR BID SECURITY/EMD (ANNEXURE-II) (To be stamped on Rs.300/- Non-Judicial stamp paper in accordance with KPTCL Circular No. KPTCL/GMT/CIVIL (B7)/35/2024-MANAGER ESTATE (E-106992) dated 02.03.2024)

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

Ref No. Insurance Surety Bond No.

In accordance with Invitation for Bids under your Bid Document No

M/s having its Registered /

Head Office at (hereinafter called the 'Contractor') wish

to participate in the said Bid for

As an irrevocable Insurance Surety Bond against Bid Security for an amount of * valid for days from **

required to be submitted by the Contractor as a condition precedent for participation in the said bid which amount is liable to be forfeited on the happening of any contingencies as mentioned under the Bidding Documents.

we, the having our Head office at

guarantee and undertake to pay immediately on demand by Karnataka Power Transmission Corporation Limited, (hereinafter called the 'Owner') the amount of

without any reservation, protest, demand and recourse. Any such demand made by the 'Owner' shall be conclusive and binding on us irrespective

of any dispute or difference raised by the Contractor and/or any right/remedy available to the Contractor in terms thereof.

This Insurance Surety Bond shall be unconditional as well as irrevocable and shall remain valid upto

If any further extension of this Insurance Surety Bond is required, the same shall be extended to such required period (not exceeding one year) on receiving instructions from

M/s on whose behalf this Insurance Surety Bond is issued.

In witness where of the Insurer, through its authorised officer, has set its hand and stamp on this

Signature Signature

Official Addressess Designation with Insurer Stamp

Attorney as per Power of Attorney No.

NOTE: 1. (*) The amount shall be as specified in the SPC. (**) This shall be the last date of bid submission deadline. (@) This date shall be Forty Five (45) days after the last date for which the bid is valid 2. The Insurance Surety Bond shall be from an Insurer as per guidelines issued by Insurance Regulatory and Development Authority of India (IRDAI) as amended from time to time. 3. The Owner shall be the Creditor, the Contractor shall be the Principal debtor and the Insurance company/Insurer shall be the Surety in respect of the Insurance Surety Bond to be issued by the Insurer. 4. The Insurance Surety Bond should be on Non-Judicial stamp paper/e-stamp paper of appropriate value as per Stamp Act prevailing in the state(s) where the Insurance Surety Bond is submitted or is to be acted upon or the rate prevailing in State where the Insurance Surety Bond is executed, whichever is higher. The Stamp Paper/e- stamp paper shall be purchased in the name of Contractor /Insurer issuing the Insurance Surety Bond. 5. While getting the Insurance Surety Bond issued, Contractors are required to ensure compliance to the points mentioned in Form of Bank Guarantee/Insurance Surety Bond Verification Check List enclosed in this Section of Bidding Documents. Further, Contractors are required to fill up this Form and enclose the same with the Insurance Surety Bond.

Karnataka Power Transmission Corporation Limited

SCHEDULE-18 PROFORMA OF LETTER OF UNDERTAKINGS (ANNEXURE-V)

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED

(To be executed on Non-Judicial paper of RequisiteValue)

1. I*/We* have read and examined the following bid documents relating to the

(full Scope of Work)

a) Notice Inviitng Tender

b) Conditions of Contract containing section 'Invitation for Tenders’, 'Instructions to Tenderers’, ‘Conditions of Contract’ and Contract Data.

c) Special Conditions of Contract along with Annexure to

d) Drawings No.

e) Technical Specifications

2 . I / We hereby submit our Bid and undertake to keep our Bid Valid for a period of One Hundred and Eighty days (180 days) from the Last date of bid submission as notified (either original or extended). I*/We* hereby further undertake that during said period I/We shall not vary/alter or revoke my/our Bid.

This undertaking is in consideration of KPTCL agreeing to open my/ our Bid and consider and evaluate the same for the purpose of award of Work in terms of provisions of clause entitled "Award of Construct" 'cl.no. 26 of Section ITT and cl.no. 18 of SCC of the Bid Documents.

Should this bid be accepted, I*/We* also agree to abide by and fulfil all the terms, conditions of provision of the above mentioned bid.

Signature along with Seal of Co.

(Duly Authorised to sign the Tender on Behalf of the Contractor.)

NAME OF THE COMPANY (in Block Letters)

SIGNATURE Date and Postal Address

DATE Telegraphic Address

NAME AND ADDRESS Telephone No.

Karnataka Power Transmission Corporation Limited

SCHEDULE-19 CONSORTIUM AGREEMENT (To be stamped on Rs.500/- Non Judicial stamp paper in accordance with KPTCL Circular No. KPTCL/GMT/CIVIL(B7)/35/2024-MANAGER ESTATE (E-106992) dated 02.03.2024) (ANNEXURE -XIII)

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED IN E-PROCUREMENT PORTAL.

CONSORTIUM AGREEMENT AMONGST M/s M/s

For Bid Specification No. OF KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

This consortium agreement executed on this day Month of Two thousand Twenty Five

amongst M/s a company incorporated under the laws of (Country) and having its registered office at

(hereinafter called the "Lead Company" which expression shall include its successors ,executors and permitted assigns),

M/s a company incorporated under the laws of (Country) and having its registered office at

(hereinafter called the "Constituent Company" which expressions shall include its successors,executors and permitted assigns)

for the purpose of making a bid and entering into a contract (In case of award) against the specification no.

For NAME OF THE WORK

for Karnataka Power Transmission Corporation Ltd. having its registered office at Indhana Bhavan , Bangalore 560 009 , Karnataka (hereinafter called the "Owner"). The leader of the consortium shall abide by the general terms and conditions specified by the Purchaser. WHEREAS the Owner invited bids as per the above mentioned specifications for the design, manufacture, supply and erection, testing and commissioning of Equipments/Materials stipulated in the bidding documents under subject package

NAME OF THE WORK

AND WHEREAS Section-I ( Volume-1: Clause No. 11:- Qualifying Requirement), forming part of the bidding documents, stipulates that a consortium meeting the requirements of Section-I, ( Invitation of Bid) applicable may bid, provided the Consortium fulfills all other requirements of specification and in such a case, the Bid shall be signed by the members so as to legally bind the members and who will be jointly and severally liable to perform the Contract and all obligations hereunder.

The above clause further states that the consortium agreement shall be attached to the bid and the contract performance guarantee will be as per the format enclosed with the bidding document without any restriction or liability for either party.

AND WHEREAS the bid has been submitted to the Owner vide proposal No dated

by Lead Company based on the Constituent agreement between all the consortium under these presents and the bid in accordance with the requirements of Specifications (Qualification Requirements).

NOW THEREFORE THIS UNDERTAKING WITNESSETH AS UNDER:

In consideration of the above premises and agreements all the partners to this consortium members do hereby now agree as follows:

1 In Consideration of the award of the Contract by the Owner to the Consortium members, we , the members to the consortium agreement do hereby agree that M/s

shall act as Lead Company and further declare and confirm that we shall jointly and severally be bound up to the Owner for the successful performance of the contract and shall be fully responsible for the design, manufacture, supply and successful performance of the equipments in accordance with the Contract.

2 In case of any breach of the said contract by the Lead company or other constituent of the Consortium agreement, the Lead company do hereby agree to be fully responsible for the successful performance of the contract and to carryout all the obligations and responsibilities under the contract in accordance with the requirements of the Contract

3 Further, if the Owner suffers any loss or damage on account of any breach in the contract or any shortfall in the performance of the equipment in meeting the performance guaranteed as per the specification in terms of the contract, the Lead company of these presents undertake to promptly make good such loss or damages caused to the Owner, on its demand without any demur. It shall not be necessary or obligatory for the Owner to proceed against Lead Partner to these presents before proceeding against or dealing with the other Partner (s).

4 The Financial liability of the members of the consortium agreement to the Owner, with respect to any of the claims arising out of performance or non-performance of the obligations set forth in the said agreement, read in conjunction with the relevant conditions of the contract shall, however not be limited in any way so as to restrict or limit the liabilities of any of the members of the agreement.

5 It is expressly understood and agreed between the members to this consortium agreement that the responsibilities and obligations of each of the partners shall be as delineated hereunder (To be incorporated suitably by the member to this agreement). However, each member of the consortium will be severally and jointly responsible for the faithful performance of the contract. It is further agreed by the member that the above sharing of responsibilities and obligations shall not in any way be a limitation of joint and several responsibilities of the members under this contract.

Sl.No. Name of the Lead Bidder/Consortium Partner. Scope of the work/Participation

We further declare ourselves bound to execute our scope of work/participation as stated above;

6 This Consortium agreement shall be constructed and interpreted in accordance with the laws of India and the courts of Bangalore shall have the exclusive jurisdiction in all matters arising there under.

7 7) In case of an award of a Contract, we the Consortium members do hereby agree that we shall be jointly & severally responsible for the works respectively executed and Lead company shall furnishing a contract performance security from a bank/Insurer in favor of the PURCHASER in the forms acceptable to purchaser for value of Five percent (5%) of the Amount put to tender (Excluding GST) plus additional security for unbalanced tenders in accordance with Clause 29 of Instructions To Tenderers (ITT).

8 It is further agreed that the Consortium agreement shall be irrevocable and shall form an integral part of the contract, and shall continue to be enforceable till the owner discharges the same. It shall be effective from the date first mentioned above for all purposes and intents.

IN WITNESS WHEREOF the partners to the Consortium have through their authorized representatives executed these presents and affixed Common seals of their companies, on the day, month and year first mentioned above.

WITNESS for Lead Company

(Signature) (Signature of the authorized representative)

(Name in Block Letters) (Name)

Designation (Designation)

Common Seal of the Company

2 ( For Constituent 1)

(Signature of the authorized representative)

(Name in Block Letters) (Name)

Designation Common Seal of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE-20a POWER OF ATTORNEY (ANNEXURE-XI)

(For Individual Bidder or Lead Parnter of Consortium)

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED.

POWER OF ATTORNEY

(To be stamped on Rs.500/- Non Judicial stamp paper in accordance with KPTCL Circular No. KPTCL/GMT/CIVIL (B7)/35/2024-MANAGER ESTATE (E-106992) dated 02.03.2024)

KNOW ALL MEN BY THESE PRESENTS that we

a Company incorporated

under the laws of

and having its Registered Office / Head Office at

"Manufacturer / Bidder" which expression shall unless repugnant to the

Context or meanig thereof, include its successors, administrators and assigns)

acting through Mr its constitute, nominate and appoint

M/s a Company incorporated under the laws of

and having its Registered / Head Office at

as its duly constituted lawful Attorney (hereinafter called "Attorney"

or "Authorized Representative") to exercise all or any of the powers for and on

behalf of the "Manufacturer / Bidder" in regard to Specification No.

the bids for which have been invited by

(Address "Owner") to undertake the following acts:

i. To submit proposal and participate in the aforesaid Bid Specification of the Owner on behalf of the "Manufacturer / Bidder".

ii. To negotiate with the "Owner" the terms and conditions including price for award of the contract pursuant to the aforesaid Bid and to sign the contract with the "Owner" for and on behalf of the Manufacturer / Bidder.

iii. To receive accept and execute the contract for and on behalf of the "Manufacturer / Bidder".

iv. To do any other act or submit any document related to the above.

It is expressly understood that the Power of Attorney shall remain valid, binding and irrecoverable till submission of the Contract performance guarantee in terms of the Contract. The "Manufacturer / Bidder" hereby agrees and undertakes to ratify and confirm all the whatsoever the said "Attorney" / "Authorised Representative" quotes in the Bid, negotiates and signs the contract with the "Owner" and / or purports to act on behalf of the "Manufacturer / Bidder" by virtue of this Power of Attorney and the same shall bind the "Manufacturer / Bidder" as if done by itself.

IN WITNESS WHEREOF THE "Manufacturer / Bidder" has executed these presents at

on this day of under

the Common Seal of the Manufacturer company / Bidder.

Specimen Signature of Attorney Holder

(Name & Designation)

For and on behalf of

Common Seal of the above Manufacturer/Bidder

Has been affixed thereto in the presence of :

Karnataka Power Transmission Corporation Limited

SCHEDULE-20(b) POWER OF ATTORNEY (ANNEXURE-XV)

(FOR CONSORTIUM MEMBER)

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED

POWER OF ATTORNEY

(To be stamped on Rs.500/- Non Judicial stamp paper in accordance with KPTCL Circular No. KPTCL/GMT/CIVIL (B7)/35/2024-MANAGER ESTATE (E-106992) dated 02.03.2024)

KNOW ALL MEN BY THESE PRESENTS that we

a Company incorporated

under the laws of

and having its Registered Office / Head Office at

"Manufacturer / Bidder" which expression shall unless repugnant to the

Context or meanig thereof, include its successors, administrators and assigns)

acting through Mr its constitute, nominate and appoint

M/s a Company incorporated under the laws of

and having its Registered / Head Office at

as its duly constituted lawful Attorney (hereinafter called "Attorney"

or "Authorized Representative") to exercise all or any of the powers for and on

behalf of the "Manufacturer / Bidder" in regard to Specification No.

the bids for which have been invited by

(Address "Owner") to undertake the following acts:

i. To submit proposal and participate in the aforesaid Bid Specification of the Owner on behalf of the "Manufacturer / Bidder".

ii. To negotiate with the "Owner" the terms and conditions including price for award of the contract pursuant to the aforesaid Bid and to sign the contract with the "Owner" for and on behalf of the Manufacturer / Bidder.

iii. To receive accept and execute the contract for and on behalf of the "Manufacturer / Bidder".

iv. To do any other act or submit any document related to the above.

It is expressly understood that the Power of Attorney shall remain valid, binding and irrecoverable till submission of the Contract performance guarantee in terms of the Contract. The "Manufacturer / Bidder" hereby agrees and undertakes to ratify and confirm all the whatsoever the said "Attorney" / "Authorised Representative" quotes in the Bid, negotiates and signs the contract with the "Owner" and / or purports to act on behalf of the "Manufacturer / Bidder" by virtue of this Power of Attorney and the same shall bind the "Manufacturer / Bidder" as if done by itself.

IN WITNESS WHEREOF THE "Manufacturer / Bidder" has executed these presents at

on this day of under

the Common Seal of the Manufacturer company / Bidder.

Specimen Signature of Attorney Holder

(Name & Designation)

For and on behalf of

Common Seal of the above Manufacturer/Bidder

Has been affixed thereto in the presence of :

Karnataka Power Transmission Corporation Limited

SHEET FOR TECHNOCOMMERCIAL OPENING (UN - PRICED)

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bidders Name and Address

To, The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

We Declare that the ratings and performance figures of the equipment furnished by us under the Turnkey Package are Guaranteed. We further declare that in the event of any deficiencies in meeting the guarantees in repect of the characteristics as established after conducting the performance test, you may at your discretion, reject the equipment, in which case we shall replace the same with equipment as per specification and meeting the guarantee, free of charge and within a resonable time, to be mutually agreed.

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE -22 - Check List

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

BIDDERS NAME AND ADDRESS To,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

CHECK LIST FOR SUBMISSION OF SCHEDULES

REFERENCE OF FORM & SCHEDULE DETAILS OF FORM & SCHEDULE WHETHER INCLUDED IN TECHNO-COMMERCIAL SHEETS (ELECTRONIC) YES/NO WHETHER INCLUDED IN Item-Wise Bid Financial Offer (ELECTRONIC) YES/NO WHETHER INCLUDED IN COMMERCIAL

PROPOSAL BID PROPOSAL

Schedule - 1 PRICE COMPONENTS

Schedule 2 (1 of 2 & 2 of 2) Summary of Price Components

Schedule 2A Schedule of Discounts

Schedule 2B Statement of Commercial Terms & Conditions

Schedule 3A & 3B Price break up for supply & erection

Schedule 3C Price break up for civil works

Schedule 4 Price break up for mandatory spares and maintenance & Testing Equipments.

Schedule 5 Commercial deviations

Schedule 6 Technical deviations

Schedule 7 List of special Tools & Tackles

Schedule 8 Additional information.

Schedule 9 Qualification Information [Technical & Financial]

Schedule 10 Details of Tools and plants and man power deployment

Schedule 11 A & 11B Schedule for activities & Commissioning.

Schedule 12 Type Test Charges

Schedule 13 List of optional spares and cost.

Schedule 14 Guaranteed loss of transformer.

Schedule 15 List of vendors.

Schedule 16 Annexure 'A' No deviation certificate

Schedule 17a & b Proforma for Bid guarantee

Schedule 18 Proforma for letter of undertaking

Schedule 19 Consortium Agreement

Schedule 20a & 20b Power of attorney for Individual Bidder / Lead Partner of Consortium and Consortium Member

Schedule 21 Guaranteed Declaration

Schedule 22 Check List

DRS 1-20 Relevant Technical details for Materials / Equipments

To be Uploaded Contract Quality Assurance Programme

To be Uploaded Type Test Certificates

To be Uploaded & furnished Bid Security/EMD

To be Uploaded Written Power of Attorney

To be Uploaded Letter of Undertaking

To be Uploaded No Deviation Certificate

To be Uploaded Any Other (Please Specify)

To be Uploaded Any Other (Please Specify)

To be Uploaded Any Other (Please Specify)

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

A1 : GUARANTEED TECHNICAL PARTICULARS FOR POWER TRANSFORMERS

(Bidder should indicate the guaranteed technical data of all equipments/materials for each type of rating separately)

Class of Power Transformer 20MVA, 110/33-11kV Power Transformer

1 Name of the Manufacturer and country of origin

2 Reference standard

3 Service [Indoor/outdoor]

4 Continuous rating under service conditions specified in IS-2026 Part-I, 2011 Clause No.1.1 : HV

a. 1. With ONAN cooling - MVA

2. With ONAF cooling - MVA

b. Rated no load voltage

6 a. Rated Frequency : (Hz)

b. Number of phases

7 Current at rated voltage and on principal tap-Amp :HV

8 Maximum hot spot temperature rise calculated by formula 0C over the maximum yearly weighted average ambient temperature

9 Flux density at rated voltage and rated frequency in tesla

10 Temperature rise of top oil, oC by the thermometer (above Max. Ambient Temperature).

11 Temperature rise of winding measured by resistance (above Max. Ambient Temperature).

i. With ONAN cooling oC

ii. With ONAF cooling oC

iii. Period of operation of transformer at full load without calculated winding hot spot temperature exceeding 140oC and when

50% coolers fail

100% coolers fail [Refer Cl. No. 1.2.0.1]

12 No. of windings

13 Connections HV

14 Connection Symbol and vector group

i. Type of tap changer

ii. Tap step (percent)

iii. Total tap range (+) percent to (-) percent

iv. Tappings provided at

v. Type of regulation :

Constant flux regulation

Variable flux regulation

Combined regulation

vi)Insulation level of tap changer

16(A) Magnetization data at no load, at rated frequency

i. Current in Amps

ii. Power factor

iii. Loss in KW (core loss + dielectric loss)

iv. Max. flux density in lines/sq.cm.

a At 90% rated no load voltage

b At 100% rated no load voltage

c At 110% rated no load voltage

d At maximum rated primary voltage (i.e. 105% rated no load voltage)

16(B) i) Max. No-load loss at rated frequency at Principal Tap (KW)

ii) Max. No-Load loss at voltage corresponding to the Highest Tap (KW)

17 Max.load loss in KW at rated current and at 750C At Lowest Tap At Principal Tap At Highest Tap

a. For ONAN rating KW

b. For ONAF rating in KW

c. For OFAF rating in KW

Max. I2 R loss in KW at rated current and at 75◦C

a. For ONAN rating in KW

b. For ONAF rating in KW

c. For OFAF rating in KW

Max. Auxiliary Loss at rated Voltage & frequency

Note for Sl. No. 16 & 17: Guaranteed values of the losses shall be indicated which shall be firm & without indicating the tolerance limit

18 Impedance at rated current and frequency at 75oC winding temperature on rated MVA base. HV to LV

i. At normal tap in %

ii. At max. voltage tap in %

iii. At min. voltage tap in %

19 Reactance at rated current and frequency and normal tap on rated MVA base:

HV to LV - in %

20 Zero sequence impedance at reference temperature of 75oC at principal tap ………in %

21 Resistance at 75 oC

HV winding in Ohms in %

LV winding in Ohms in %

22 Efficiency at 75oC winding temperature as derived from guaranteed. loss figures At Unity p.f At 0.8 p.f

a. At 125% full load

b. At 100% full load

c. At 75% full load

d. At 50% full load

23 a. Maximum efficiency ………in %

b. Load at which maximum efficiency occurs (% of full load)

24 Regulation at full load and at 75oC

a. At unity p.f. in %

b. At 0.8 p.f. (lag) in %

25 a. Short time thermal rating of LV winding in KA & duration in seconds.

b. Short time thermal rating of HV winding in KA & duration in seconds.

26 Permissible overloading - HV

27 Test voltages HV LV

i. Lighting impulse withstand kV (peak)

ii. Power frequency voltage withstand kV (ms)

iii. Switching impulse withstand kV (peak)

28 Partial discharge level at 1.5Um / √3 kVrms (pC)

29 RIV at 1.1 times minimum phase to ground voltage

31 Noise level when energized at normal voltage and normal frequency at no load (db)

32 External short circuit withstand capacity (MVA) & duration (seconds)

33 Over flux withstand capability of the transformer :

34 Insulating and cooling medium

35 Approximate weights

a. Core with clamping (Kg)

b. Winding with insulation (Kg)

c. Core & Winding (Kg)

d. Tank & Fittings with accessories (Kg)

e. Oil required for first filling (Kg)

f. Untanking weight (Kg)

g. Total weight with oil weight & fitting (Kg)

h. Weight of total insulation (Kg)

36 Required quantity of oil in litres

37 Terminal arrangement

ADDITIONAL TECHNICAL PARTICULARS:

1 Details of Core (along with Tolerance if any):

a. Type of core configuration

b. Type of core joints

c. Flux density at 90% of rated voltage and frequency at Principal Tap Tesla :

d. Flux density at 110% of rated voltage and frequency at Principal Tap Tesla :

e. (i) Material of core lamination

(ii) Thickness of core lamination (mm)

f. Approximate core weight (please indicate core weight only)

g. Type of Joints used between core limb and yoke

2 Details of Windings:

a. Conductor area in sq.cm and current density in Amps/Sq.cm (at rated current). Current density A/sq. cm Conductor area sq.cm

b. Material of winding conductor

c. Approximate weight of winding (along with tolerance if any)in kgs

d. Type of windings

e. Winding insulation Type and class Graded or ungraded

f. i. Insulating material used for :

1. Regulating winding

3. HV TAP WINDING

ii. Between HV and TAP WDG and LV as applicable

iii. Between core & LV side.

iv. For core bolts, washers and end plates

v. Regulating winding & earth.

g. i. Type of axial coil support

ii. Type of Radial coil support :

h. Core bolt insulation voltage

i. Details of special arrangement provided to improve surge voltage distribution in the windings

j. Approximate weight of winding (Kgs) (Tolerance if any on the above)

k. Minimum clearance (mm) In oil In Air

Between Phases Phase to ground Between Phases Phase to ground

3 Details of Tank :

a. Material for Transformer Tank

b. Type of the tank

c. Minimum thickness of sheet

ii. Bottom (mm)

iii. Cover (mm)

iv. Cooling tubes/Radiators (mm)

d. Vacuum recommended for hot oil circulation (torr)

e. Vacuum to be maintained during oil filling in transformer tank (torr)

f. Vacuum to which the tank can be subjected without distortion (torr)

Transverse Axis Longitudinal Axis

g. No. & size of bi-directional wheels provided.

h. (i) Track gauge required for the wheels-longitudinal axis & transverse axis

(ii) Size of rail recommended for the track

4 Details of painting at works and site

5 (a) Minimum clear height for lifting tank cover and for lifting core & windings from tank (mm) (untanking height).

(b) Minimum clear height for lifting (mm)

II. Bushings - HV

6 Shipping details :

i. Parts detached for transport

ii. Weight of heaviest package in Kgs

iii. Weight of other heavy packages in Kgs

iv. Dimensions of largest package

a. Length in mm

b. Breadth in mm

c. Height in mm

v. Dimensions of other heavy packages:

a. Length in mm

b. Breadth in mm

c. Height in mm

vi. Transformer will be transported with oil / gas

7 Details of Bushings HV LV

b. Rated voltage class - KV

c. Rated current - Amps

d. One minute dry withstand power frequency voltage - kV (ms)

e. One minute wet withstand power frequency voltage - kV (ms)

f. (i) 1.2 / 50 micro sec. Lighting impulse withstand voltage - kV (Peak)

(ii) Switching surge withstand test voltage kV (peak)

g. (a) Creepage Distance in air

(b) Creepage Distance (protected)

h. Quantity of oil in bushing and specification of oil used (Kgs)

i. Whether test tap is provided

j. Weight of assembled bushing

k. Phase to earth clearance in air of live parts at the top of bushing.

l. Minimum clearance (mm) In Air

Between phases Phase to ground

m. Partial discharge level

8 Cooling system

a. Grade of oil

b. Total weight of oil in radiator in Kgs/litres

c. Total weight of radiator without oil in Kgs.

d. Total radiating surface in square meters

e. Method of drying out transformer at site

f. Type and make of material used for the radiators with size.

g. Type of radiator

h. Total number of Radiators/Banks for transformer and over all dimensions (LxBxH)

i. Rating of Transformer with one radiator bank out of service.

j. Total weight of radiators in Kgs

k. Type of mounting

l. Vacuum withstand capability

9 Cooling equipment Fan Motor Pump Motor

a. Make and Type (Details)

b. Number of connected units (nos.)

c. Number of standby units (nos.)

d. Rated Power (KW)

e. BHP of driven equipment

f. Capacity (cu m/min) or (Litres/Minute)

g. Rated voltage (Volts)

h. Locked rotor current (Amps)

i. Temperature range for which control is adjustable

j. Efficiency of motor at full load (percent)

k. Temp. rise of motor at full load (oC)

l. Whether the fan and/or pumps suitable for continuous operation at 85% of their rated voltage

m. Estimated time constant in hours for

i. Natural cooling

ii. Forced air cooling

10 On Load Tap Changing gear (should be SCADA Compatible)

c. Power flow (uni-directional or bi-directional or restricted bi-directional)

d. Rated voltage to Earth kV

e. Rated maximum current Amps

f. Step voltage V.

g. Number of steps

h. Control : Manual / Auto / Local/Remote/Independent / Parallel.

i. Auxiliary supply details

j. Voltage control (whether automatic or manual)

k. Line drop compensation Provided / Not provided.

l. Protective devices

m. Time for complete tap change (one step) sec.

n. Divertor selector switch Transient time - Cycles.

o. Value of maximum short circuit current Amps.

p. Maximum impulse withstand test voltage with 1.2/50 micro seconds full wave between switch assembly and earth (kV peak)

q. Maximum power frequency test voltage between switch assembly and earth - kV rms.

r. Maximum impulse withstand test voltage with 1.2/50 micro seconds across the tapping range (kV peak).

s. Approximate over all dimensions of Tap changer mm

t. Approximate over all weight Kgs.

u. Approximate over all quantity of oil-ltrs/Kgs.

v. Particulars of the OLTC control panel for installation in the control room.

w. OLTC Routine test shall be conducted on each Transformers.

i) Mechanical Endurance Test (Min. 1000 operations)

ii) Sequence Test

iii) Pressure Test

iv) Vacuum (Helium) Test

v) Auxiliary Circuit Insulation test

x. OLTC Drive Mechanism Box: Make & Type

11 Over all dimensions of transformer including cooling gear, tap changing gear etc.

d. Reference drawing No.

12 Whether oil temperature indicator provided (Yes/No).

13 (a) Type of oil level indicator

(b) whether supervisory alarm contact for low oil level provided (Yes/No)

14 Type and size of Gas operated relay and whether supervisory alarm and trip contacts provided and their size and Nos.

15 Temperature indicators Oil Temp. indicator Winding temp. indicator

a. Make and Type

b. Permissible setting ranges for alarm & trip.

c. No. of contact

d. Current rating of each contact

e. Whether remote indicator provided, if, so, whether equipment required at purchaser's control room is included.

f. Size and No.

16 Ratio and Type of CT used for winding temperature

17 Type and size of Thermostat used

For Tr. Tank OLTC

18 No. of Breathers provided (No.)

19 Type of dehydrating agent used for breathers

20 a. Capacity of conservator vessel litres

b. Volume between the highest and lowest visible oil level (litres)

21 Valve sizes and number required/ fitted

i. Drain valves - mm - No.

ii. Filter valves - mm - No.

iii. Sampling valves - mm - No.

22 a. Type and make of pressure relief device

b. No. of each type of devices per transformer unit (Nos.)

c. Minimum pressure at which the device operates (Kpa)

23 Lifting jacks

a. Governing standard

b. No. of jacks in one set

d. Capacity (tonnes)

g.Height in closed position (mm)

h.Mean diameter of thread (mm)

24 Characteristics of Insulating oil to be used

Viscosity at 40 ºC in mm²/s

Viscosity at -30 ºC in mm²/s

Pour point in ºC

Water content in mg/kg

Breakdown voltage in kV

Density at 20 ºC in g/ml

Particle content

2 – Refining/stability

Acidity in mg KOH/g

Interfacial tension in mN/m

Total sulphur content

Corrosive sulphur

Potentially corrosive sulphur

Inhibitors of IEC 60666 in %

Metal passivator additives of IEC 60666 in mg/kg

Other additives

2- Furfural and related compounds content in mg/kg

3 - Performance

Oxidation stability for uninhibited oil – 164 hrs

Total acidity in mg KOH/g

Gassing tendency

4 – Health, safety and environment (HSE)

Flash point in ºC

PCA content in %

PCB content in mg/kg

5 – N-dm Analysis

6. Details of oil preserving equipment offered.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

GUARANTEEED TECHNICAL PARTICULARS FOR LATTICE TYPE MOUNTING STRUCTURES

(Bidder should indicate the guaranteed technical data of all equipments / materials for each type of rating separately)

Mounting Structures

1 Standars adopted

i. Properties of section

ii. Bolts & Nuts

iii. Galvanising

2 Minimum Sheared edge distance (mm)

3 Minimum Rolled edge distance (mm)

4 Quality of Zinc used for galvanising

5 Maximum percentage increase in structure weight due for galvanisation

6 Quantity of Zinc required for galvanisation per MT of structurals

7 Size of bolts and nuts (including foundation bolts & nuts for support structure)

iii. Foundation Bolts

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

ISOLATORS AND TERMINAL CONNECTORS

(Bidder to indicate technical data for each type of rating separately)

Isolators and Terminal connectors ratings

a. Name of the Manufacturer

b. Country of Manufacture

c. Manufacturer's type designation

d. Standard applicable for isolators and earthing switches

e. Rated Voltage Ur (kV)

f. Rated Current Under site conditions (A) at 50oC ambient

g. Rated frequency (Hz)

h. Number of poles

i. Whether all 3 poles are ganged mechanically

j. Pole to pole spacing

k. Type of installation

2 Guaranteed Ratings

a. Rated short time current of isolator for Is (kA) and dynamic current (kAp)

b. Opening time of isolator and earth switch (s)

c. Closing time of isolator and earth switch (s)

d. Temperature rise over 50oC ambient temperature corresponding to maximum continuous current (oC)

3 Dielectric withstand capacity of completely assembled isolator/isolator and earth switch

a. One minute dry power freq. Withstand test voltage (kV ms)

i. Against ground (kV rms)

ii. Across isolating distance (kV rms)

b. 1.2/50 micros a impulse withstand test voltage

i. Against ground (kVp)

ii. Across isolating distance (k Vp)

c. 250/2500 micros switching surge withstand test voltage (dry & wet)

i. Against ground (kVp)

ii. Across isolating distance (kVp)

d. Corona extinction voltage (k V rms)

e. Radio interference level at 1.1 Ur/ /3 (in micro volts) at 1.0 MHz

f. Total creepage distance to ground (mm)

4 Operating Mechanism

A. For Main Blades

a. Type of motor operating / manually driven mechanism

b. Manufacturer's Type / designation

c. Rated torque of the mechanism

d. Type and rating of motor

B. For Earth Switches

a. Type of motor operating / manually driven mechanism

b. Manufacturer's type designation

c. Rate troque of the mechanism

d. Type and rating of motor

4.1 Interlocks:

a. Whether mechanical/constructional interlock between isolator and earth switch provided.

b. Details of electrical interlock enclosed for

ii. Earth Switch

c. Arrangement provided to prevent electrical or manual operation unless interlock conditions are satisfied whether interlock coil is continuously rated

d. Rated DC control voltage and variation allowed

e. Power consumption (W)

a. Rated DC control voltage (V)

b. Limits of voltage

c. Power consumption of control coils (W)

5 Constructional Features

a. Minimum clearance in air

i. Between phases (mm)

ii. Between live parts to earth (mm)

iii. Distance between terminals of same phase (mm)

b. Whether position of earth switch can be interchanged at site to either side of pole

c. Minimum clearance between live part and earth switch blade throughout the entire operational are of earth switch (mm)

d. Terminal pad details

i. Diameter & length

ii. Material of pad

e. Insulator data

iii. No. of insulator stacks / phase

iv. No. of insulators/stack

f. Main Contracts

i. Type of contacts

ii. Contract area (cm2)

iii. Material of contacts

iv. Contact pressure (kg / cm2)

v. Maximum current density under normal current carrying capacity (A/cm2)

vi. Thickness of silver plating

g. Number of auxiliary contacts on isolator/pole for owner's use

h. Number of auxiliary contacts on earth switch pole for Owner's use

i. Auxiliary contacts

i. Rated voltage (V)

ii. Rated Continuous current (A)

iii. Rated Dc breaking current with 20 ms time constant (A)

j. Mounting dimenstions of isolators

i. Distance between supports

ii. Top dimensions of support

k. Height from mounting plane to top of terminal stud

l. Whether cable glands required included in the scope for inter pole cabling to be done by the Owner.

Whether the following are enclosed :

a. Type test reports as per IEC 129

b. OGA drawings for isolator with & without earth switches

c. Operation manual for isolators

d. Details of motor operating / manually driven mechanism

e. Recommended drawing for mounting details for isolator and drives.

f. Leaflets & literature bringing out salient features of equipment offered.

g. Details of constructional interlock

CONTROL CABINETS

1 Manufacturer's Name

2 Indoor / Outdoor application

3 Design ambient air temperature (oC)

4 Standards applicable

5 Thickness of sheet steel (mm) and whether cold rolled or hot rolled

6 Degree of protection provided

7 Bill of material for all the equipment mounted on control cabinet giving the following details :

a. Make and Type

b. Applicable Standard

c. Voltage rating

d. Current rating

e. Duty class, if applicable

f. Manufacturer's catalogue No.

g. Total heat load of cabinet (for purpose of ventilation requirement)

8 Colour of finish paint IS : 5

9 Control Wiring

a. Size of conductor

i. For CT circuits

ii. For other circuits

b. Conductor Solid / Stranded

c. Number of Stranded/conductor

10 Terminal Blocks

b. Current rating

i. Power terminals (A)

ii. Other terminals (A)

11 Space Heater Rating at 240 V DC

12 Control cabinet drawing showing the following

a. Outline dimensions, floor opening, floor/wall/pedestal fixing arrangements weights etc.,

c. Front view, inside view showing the mounting arrangement of various equipment

13 Schematic / wiring diagram of control cabinet enclosed

14 Interconnection drawing showing Owner's external cable, connections to the control cabinet enclosed Isolators & Terminal Connectors

15 Type test report to verify degree of protection enclosed.

16 Details of terminal rows

i. Whether arranged vertical or horizontal

ii. Clearance from adjacent components

iii. Distance between rows

iv. Whether transparent protection cover provided.

16 TERMINAL CLAMPS AND CONNECTORS

1. Manufacturer's Name

2. Applicable Standards

4. Material of connector

b. Bolts & Nuts

c. Spring washers

5. Rated Current

6. a. Rated terminal load (kg)

b. Factor of safety

7. Minimum thickness of any part (mm)

8. Weight of clamp complete with hardware (kg)

9. Type test reports as per IS enclosed.

10. OGA drawing enclosed

BUSHING / SUPPORT INSULATOR

1 Manufacturer's Name

2 Type test report to verify degree of protection enclosed.

3 Applicable Standards

i. Diameter (Top)

ii. Diameter (Bottom)

5 Total Creepage distance (mm)

6 Rated voltage (kV)

7 Power frequency withstand voltage for 1 min. (k V rms) dry and wet

8 1.2/50 micro sec. Impulse withstand voltage (kVp)

9 250/2500 micro sec. Switching impulse withstand voltage (kVp) dry and wet

10 Corona Extinction voltage (k V)

12 Max. allowable span (mm)

13 Cantilever Strengthh (kg)

14 OGA drawing enclosed

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

GUARANTEED TECHNICAL PARTICULARS FOR CURRENT TRANSFORMERS

(Bidder should indicate the guaranteed technical data of all equipments/materials for each type of rating separately)

Voltage Class and ratio of CT

Sl.No. PARTICULARS

1 Name of the manufacturer

2 Country of origin

3 Standard Governing specification

5 Manufacturer's type designation

6 a. Nominal system voltage KV

b. Highest system voltage KV

7 a, Rated primary current

b. Rated secondary current Amp

c. Rated transformation ratio Amp

8 Rated Secondary terminal Voltage at

i. Rated Current

ii. 10 Times the rated current

iii. 20 Times the rated current

9 Ratio of current Transformer

10 Number of Cores

11 Details of Core

i. Rated Burden

ii. Accuracy Class

iii. Accuracy limit factor

iv. Instrument Security factor

v. Knee point voltage at

vi. Secondary winding

resistance (Ret. In Ohms)

vii. Magnetising current at Vk/4

i. Rated Burden

ii. Accuracy Class

iii. Accuracy limit factor

iv. Instrument Security factor

v. Knee point voltage at

vi. Secondary winding

resistance (Ret. In Ohms)

vii. Magnetising current at Vk/4

i. Rated Burden

ii. Accuracy Class

iii. Accuracy limit factor

iv. Instrument Security factor

v. Knee point voltage at

vi. Secondary winding

resistance (Ret. In Ohms)

vii. Magnetising current at Vk/4

i. Rated Burden

ii. Accuracy Class

iii. Accuracy limit factor

iv. Instrument Security factor

v. Knee point voltage at

vi. Secondary winding

resistance (Ret. In Ohms)

vii. Magnetising current at Vk/4

i. Rated Burden

ii. Accuracy Class

iii. Accuracy limit factor

iv. Instrument Security factor

v. Knee point voltage at

vi. Secondary winding

resistance (Ret. In Ohms)

vii. Magnetising current at Vk/4

12 Current error at rated primary current

13 Phase displacement at rated primary current

14 Composite error at rated accuracy limit primary current in %

15 Rated short time current and duration

a. Thermal ( I th) KA (rms) for 1 sec KA

b. Dynamic (I dyn) (peak)

16 Temperature rise of the windings (by resistance method) over an ambient temperature of 45oC

a)At rated current Deg C

b)At 100% overload for 5 minutes Deg C

17 Partial discharge level

18 Particulars of windings

a. Primary winding :

ii. No.of turns

iii.Current density at rated current Amp / Sq.mm

iv. Size of conductor

v. class of insulation

b. Secondary winding

ii. No. of turns

iii.Current density at rated current Amp / Sq.mm

iv. Size of conductor

v. Class of insulation

vi. Resistance computed to 75 deg C Ohm

vii. Insulating material used

c. Rated insulation levels :

i. One minute power withstand voltage KV (rms)

ii. Intersection withstand voltage of primary windings KV (rms)

iii. Impulse withstand voltage KV (rms)

19 Particulars of core :

ii. Flux density :

a. At rated primary current Tesla

b. At 15 times rated primary current Tesla

iii. Thickness of steel lamination mm

iv. Whether CRGO steel stampings are used?

v. Watt loss/Kg. of steel

vi. Knee point e.m.f

20 Particulars of porcelain housing / bushing

i. Specification to which it confirms

ii. Name of manufacturer

iii. Power frequency withstand voltage for one minute

a. Dry KV (rms)

b. Wet KV (rms)

iv. Dry lightning impulse withstand voltage 1.2/50 micro sec. Wave shape KV (rms)

v. Visible power frequency discharge voltage KV (rms)

vi. Creepage distance in air

a. Protected mm

vii. Weight of porcelain housing / bushing kgs

21 Overall dimensions :

i. Total weight of copper used

a. Primary winding kg

b. Secondary winding kg

ii. Weight of core kg

iii. a. Quantity of insulating oil liters

b. Weight of insulating oil kgs

iv. Total weight kgs

23 Particulars of terminal connector

i. Name of the manufacturer

ii. Rated current Amps

iii. Temperature rise above an ambient of 45 deg.c

a. At rated current Deg C

b. At 150% of rated current for 15 min Deg C

CONTROL CABINET :

1 Manufacturer's Name

3 Design ambient air temperature (oC)

4 Standards applicable

5 Thickness of sheet steel (mm) and whether cold rolled or hot rolled

6 Degree of protection provided

7 Bill of material for all the equipment mounted on control cabinet giving the following details

b. Applicable Standard

c. Voltage rating

d. Current rating

e. Duty class, if catalogue No.

f. Manufacturer's catalogue No.

g. Total heat load of cabinet (For purpose of ventilation requirement)

8 Colour of finish paint IS : 5

9 Control Wiring

a. Size Conductor

i. For CT circuits

ii. For other circuits

b. Conductor Solid Stranded

c. Number of Strands / conductor

10 Terminal Blocks

b. Current terminals (A)

i. Power terminals (A)

ii. Other terminals (A)

11 Space Heater Rating at 240 VAC

12 Control cabinet drawing showing the following

a. Outline dimensions, floor openings, Floor/wall/pedestal fixing arrangements, Weights etc.

b. Front view, inside view showing the Mounting arrangement of various Equipment.

13 Schematic / wring diagram of control Cabinet enclosed

14 Interconnection drawing showing cable, Connections to the control cabinet enclosed.

15 Type test report to verify degree of Protection enclosed

16 Details of terminal rows

i. Whether arranged vertical or horizontal

ii. Clearance from adjacent components

iii. Distance between rows

iv. Whether transparent protection cover provided

SUPPORT INSULATOR

1 Manufacturer's Name

3 Applicable Standards

ii. Diameter (Top)

iii. Diameter (Bottom)

5 Total creepage distance (mm)

6 Rated voltage (KV)

7 Power frequency withstand voltage for 1 min (KV rms) dry and wet

8 1.2/50 micro sec. Impulse withstand voltage (KVP)

9 250/2500 micro sec. Switching impulse

10 Corona Extinction voltage (KV)

12 Max. allowable span (mm)

13 Cantilever Strength (Kg)

14 OGA drawing enclosed

TERMINAL CLAMPS AND CONNECTORS

1 Manufacturer's Name

2 Applicable Standards

4 Material of connector

b. Bolts & Nuts

c. Spring washers

5 Rated Current

6 a. Rated terminal load (Kg)

b. Factor of safety

7 Minimum thickness of any part (mm)

8 Weight clamp complete with hardware (Kg)

9 Type test report as per IS enclosed

10 OGA drawing enclosed

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

GUARANTEED TECHNICAL PARTICULARS FOR ACSR CONDUCTOR

(Bidder should indicate the guaranteed technical data of all equipments/materials for each type of rating separately)

Sl. No. Bidders Name

ASCR Conductor ASCR Conductor ASCR Conductor ASCR Conductor

Description Unit

1 Name & Address of manufacturer

2 PARTICULARS OF RAW MATERIALS

a Minimum Purity of aluminium %

b Maximum Copper content %

2.2 Steel Wires/Rods

c Phosphorous %

a Minimum Purity of zinc %

3 STEEL STRANDS

b Maximum Copper content mm

3.2 Minimum Braking load of strand KN

3.3 Maximum Resistance of 1m length of strand at 20 deg C Ohm

4 STEEL STRANDS AFTER STRADING

4.2 Minimum Braking load of strand KN

4.3 Galvanising

a Minimum weight of zinc coaing per sqm. Of uncoated wire surface Gm

b Minimum number of one minute dips that the galvanised strand can withstand in the standard preece test Nos.

c Min.No. of twists in a guage length equal to 100 times dia of wire which the strand can withstand in the torsion test. Nos.

5 ACSR Conductor

5.1 UTS of conductor KN

5.2 Lay ratio of conductor

a Outer steel layer

b 12 wire aluminium layer

c 18 wire aluminium layer

d 24 wire aluminium layer

5.3 DC resistance of conducor at 20 deg. C Ohm/km

5.4 Minimum Corona Extincion Voltage (line to ground)

5.5 RIV at 1MHz

a a 305KV (rms) under dry conditions microvolts

5.6 Standard length of conductor in one drum M

5.7 Direction of lay for outside layer NA

5.8 Linear mass of the conductor

a Standard Kg/km

b Minimum Kg/km

c Maximum Kg/km

6 Drum is as per specificaion Yes/No

7 No. of cold pressure butt welding equipments available at works Nos.

1 Name & Address of manufacturer

2 PARTICULARS OF RAW MATERIALS

2.1 Steel Wires/Rods

c Phosphorous %

a Minimum Purity of zinc %

3 STEEL STRANDS

3.2 Minimum Braking load of strand KN

3.3 Galvanising

a Minimum weight of zinc coating per sqm. Of uncoated wire surface Gm

b Minimum number of one minute dips that the galvanised strand can withstand in the standard preece test Nos.

c Min. no. of twists in a guage length equal to 100 times dia of wire which the strand can withstand in the torsion test. Nos.

4.0 STRANDED EARTHWIRE

4.1 UTS of conductor KN

4.2 Lay length of outer seel layer

4.3 DC resistance of conducor at 20 deg. C Ohm/km

4.4 Standard length of conductor in the drum Mtrs

4.5 Direction of lay for outer layer NA

4.6 Linear mass of earth wirer

c Minimum Kg/km

5.0 Drum is as per specificaion Yes/No

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

GUARANTEED TECHNICAL PARTICULARS FOR POST INSULATORS AND DISC INSULATORS

(Bidder should indicate the guaranteed echnical data of all equipments/mzaterials for each type of rating separately)

Post Insulators & Disc Insulators

1.00 POST INSULATORS 11kV

1.01 Manufacurer's name and Address

1.02 Type of Insulators Units

1.03 Applicable Standard

1.04 No. of Units per Sack

1.05 Whether corona ring provided or not (Yes/No)

1.06 Diameter (mm)

1.07 Bolt circle diameter (mm)

1.08 Spacing bewteen two units (mm)

1.09 Creepage Distance

b Protected (mm)

1.10 Power frequency wihstand volage of insulator

i. Dry (KV rms)

ii. Wet (KV rms)

b One complete stack

i. Dry (KV rms)

ii. Wet (KV rms)

1.11 1.2/50 micro sec.impulses withstand voltage

b Complete stack

1.12 Visual discharge volage for falling power frequency voltage for complete stack

1.13 Radio interference voltage of compete stack

i Test Voltage(KV rms)

ii Radio interference voltage (micro volt)

1.14 Weight of complete stack (Kg)

1.15 Cantilever Strength

ii Underhung (Kg)

b Complete stack

ii Underhung (Kg)

1.16 Tensile Strength (Kg)

1.17 Torsional Strength (Kg.m)

1.18 Compression Strength (Kg)

1.19 250/2500 micro second switching surge withstand voltage

i Dry (KV Peack)

ii Wet (KV Peack)

b Complete stack

i Dry (KV Peack)

ii Wet (KV Peack)

1.20 Whether shed profile of insulaor is conforming to IEC-815? (Yes/No)

1.21 Whether calculation characterising shed profile as per IEC-815 are enclosed with bid? (Yes/No)

1.22 Wheher offered BPI is alternate shed type?

1.00 INSULATOR STRINGS 66kV

1.01 Manufacturer's Name

1.02 Type of string

a Single/Double

b Suspension/Tension

1.03 Applicable standards

1.04 Type of Insulators

a Ball & socket/oher

b Whether fog type

1.05 Insulating Material

1.06 No. of unis per string

1.07 Size of each unit

a Diameter of disc (mm)

b Spacing between adjacent units (mm)

a Each disc (Kg)

b Complete String (mm)

1.09 Creepage Distance

a Each disc (mm)

b Complete String (mm)

1.10 power frequency withstand voltage of the complete string with corona control ring

1.11 Lightening impulse withstand voltage of the complete string for both positive and negative

1.12 Switching surge withstand voltage of the complete string with corona ring.

1.13 Power frequency puncture withstand voltage of each Disc (KV rms)

1.14 Electro Mechanical strength (KG) of each disc.

1.15 Minimum corona extinction voltage level of the complete string with corona ring (Dry condition)

1.16 RIV level of the complete string with corona control ring shall be below 1000 micro at 1 MHz when subjected to a test voltage indicated against clause 1.15 above. (Dry condition)

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

GUARANTEED TECHNICAL PARTICULARS FOR INSULATOR HARDWARE AND CLAMPS

(Bidder should indicate the guaranteed technical data of all equipments/materials for each type of rating separately)

1.00 Insulator hardware

1.01 Manufacturer's Name and address

1.02 Applicable Standards

b Nuts bolts and washers

e Strain and suspension/drop clamp (kg)

1.04 Ultimate Strength

a Complete assembly (kg)

b Suspension /drop clamp (kg)

c Strain clamp (kg)

d D-shackle (kg)

e Ball eye (kg)

f Ball clevis (kg)

g Clevis eye (kg)

h Socket eye (kg)

I Socket clevis (kg)

j Yoke Plate (kg)

1.05 Magnetic power loss at

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

GUARANTEED TECHNICAL PARTICULARS FOR SURGE ARRESTORS

(Bidder should indicate the guaranteed technical data of all equipments / materials for each type of rating separately)

Surge Arrestors 96kV 30kV

SURGE ARRESTORS

a. Manufacturer's Name

b. Manufacturer's type / designation

c. Applicable standards

ELECTRICAL CHARACTERISTICS

2 A. Arrester class and Type

b. Rated arrester voltage (kV)

c. Maximum continuous operating voltage (COV) at design ambient temeprature

d. Nominal discharge current (8/20 micro sec. Wave) (kA)

e. i. Minimum discharge capacity (kJ/kV) referred to rated voltage of minimum of discharge characteristics

ii. Line discharge class, as per IEC

f. Maximum equivalent front of waver protection level (discharge voltage with 0.5 * 1.5 micro sec, 10 kA impulse current).

g. i. Minimum switching surge residual voltage at 1 kA (kV p)

ii. Maximum switching surge residual voltage at 1 kA(kVp)

h. Maximum residual voltage for 8/20 micro sec. Current wave

i. At 50% nominal discharge current (kVp)

ii. At 100% nominal discharge current (kVp)

iii. At 200% nominal discharge current (kVp)

i. One minute power frequency (dry) withstand Voltage of arrester (k Vrms)

j. Impulse withstand test voltage of arrester housing with 1.2/50 micro sec. Wave (kVp)

k. Impulse current withstand

i. High current short duration (4/10 micro sec. Wave) kAp

ii. Low current long durationn (A peak)

l. Maximum internal ionisation at 50 Hz voltage equal to

m. Reference voltage and corresponding reference current of arrester.

n. Maximum internal leakage current at (mA).

iii. COV at 150oC

iv. Reference voltage

o. Pressure relief class

p. Are the protection levels affected by pollution of external insulation

q. Energy absorption capacity in kJ per operation of the arrester, during a switching surge discharge.

r. Maximum amount of energy that may be dispatched into the arrester during discharge into the arrester during discharge assuming that discharge takes place within 1 min period and state the switching surge current.

s. Internal pressure required to operate pressure relief device as a percentage of burst pressure of porcelain

t. Dynamic over voltage withstand kVp

ii. For 0.01 sec.

iii. For 0.1 sec.

u. Minimum prospective symmetrical fault current (kA rms)

v. Rejection rate of ZnO blocks during manufacturing and operation for the past three years (%) seperately

w. Rated voltage of ZnO disc (kV)

i. No. of ZnO discs in a unit

ii. No. of units/arrester

iii. Height / Thickness of ZnO discs 9(mm)

iv. Diameter of ZnO disc. (mm)

3 EXTERNAL INSULATION

b. Applicable standard

c. Impulse voltage withstand test voltage of housing with 1.2 / 50 micro sec wave (kVp)

d. One minute power frequency withstand voltage of arester housing dry and wet (kv rms)

e. Total creepage distance of arrester housing (mm)

f. Cantilever strength of complete arrester (kg)

4 OVERALL DIMENSIONS

A. Overall dimensions

i. Overall Height (mm)

ii. Height upto top of terminal pad from mounting plane

iii. Material of terminal pad

iv. Size of terminal pad

v. Mounting dimensions and diameter of mounting holes

vi. Diameter of insulator

b. Total weight of complete arrester (kg)

TERMINAL CLAMPS AND CONNECTIONS

1 Manufacturer's Name

2 Applicable Standards

4 Material of connector

b. Bolts & Nuts

c. Spring washers

5 Rated Current

6 a. Rated terminal load (kg)

b. Factor of safety

7 Minimum thickness of any part (mm)

8 Weight of clamp complete with hardware (kg)

9 Type test reports as per IS enclosed

10 OGA drawing enclosed.

BUSHING / SUPPORT INSULATOR

1 Manufacturer's Name

3 Applicable Standards

ii. Diameter (Top)

iii. Diameter (Bottom)

5 Total Creepage distance (mm)

6 Rated voltage (kV)

7 Power frequency withstand voltage for 1 min. (k Vrms) dry and wet

8 1.2/50 micro sec. Impulse withstand voltage (kVp) dry and wet

9 250/2500 micro sec. switching impulse withstand voltage (kVp) dry and wet

10 Corona Extinction voltage (kV)

12 Max. allowable span (mm)

13 Cantilever Strength (kg)

14 OGA drawing enclosed.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

GUARANTEED TECHNICAL PARTICULARS FOR POWER CABLES (LV CABLES)

SL. No PARTICULARS

1.1kV Grade PVC Power Cables

3 Manufacturer’s type designation

4 Applicable Standard

5 Rated voltage (volts)

6 Type & Category

7 Suitable for earthed or unearthed system

8 Continuous current rating when laid in air in a ambient temp. of 50°C and for maximum conductor temp. of 70°C of PVC Cables (For information only)

9 Ration factors applicable to the current ratings for various conditions of installation.

10 Short Circuit capacity

a)Guaranteed short circuit Amp. (rms) KA for 0.12sec duration at rated conductor temperature of 90 degree C, with an initial peak of 105kA.

b). Maximum conductor temp. allowed for the short circuit duty (deg. C) as stated above.

c) Cross section area (Sq.mm)

d) Number of wires (No.) minimum

e) Form of conductor

f) Direction of lay of stranded layer

12 Conductor resistance (DC) at 20°C per km - maximum

a) Composition of insulation

b) Nominal thickness of insulation (mm)

c) Minimum thickness of insulation

14 Inner Sheath

b) Calculated diameter over the laid up cores, (mm)

c) Thickness of sheath (minimum) mm

a) Type and material of armour

b) Direction of armouring

c) Calculated diameter of cable over inner sheath (under armour), mm

d) Nominal diameter of round armour wire (minimum)

e) No. of Armour wires/stripes

f)Short circuit capacity of the armour along for 1 second – for info. Only

g) DC resistance at 200C (Ω/Km)

16 Outer sheath

a) Material (PVC Type)

b) Calculated diameter under the sheath

c) Min. thickness of sheath (mm)

d) Colour of Sheath

a) Guaranteed value of minimum oxygen index of outer sheath at 270C *

b)Guaranteed value of minimum temperature index at 21 oxygen index *

c). Smoke density rating as per IEC 61034 *

d). Maximum HCL emission as per IEC 60754-1 *

e)All the factory acceptance test to be done as per relevant IS/IEC and KPTCL specification

18 a)Overall diameter of cable

b). Tolerance of overall diameter (mm)

a) Max./standard length per drum for each size of cable (single length) with ±5% Tolerance (mtrs)

b) Non standard drum lengths

20 Whether progressive sequential marking on outer sheath provided at 1 meter interval

21 Identification of cores

a) Colour of cores

22 Whether cables offered are ISI marked

23 Whether cables offered are suitable for laying as pr IS 1255

24 1.0 Continuous current rating of the cable

a) In ground at soil temperature 30°C and soil thermal resistivity of 150°C cm/watt and depth of burial about a metre (A)

b) In air at 40°C (A)

c) Overload capacity and duration (A, Hr)

d) Derating Factors for :

i) Soil temperature and thermal resistivity

ii) Ambient temperature

iii) Single core cables laid in trefoil circuits

2) General Technical Data (Power cables)

2.1) Equivalent star impedance per km of 3 Ph, circuit at power frequency at maximum conductor temperature (Ohm)

2.2) Maximum electrostatic capacitance per core per km of cable (F)

2.3) Maximum charging current per conductor per km at nominalvoltage (A)

2.4) Loss tangent at normal frequency and rated voltage

2.5) Maximum dielectric loss of cable per km at normal voltage and frequency Watts/km

2.6) Short circuit capacity for 1 Sec. KA (rms)

2.7) Short Circuit current capacity of armour (kA for 1 sec)

2.8) Maximum dielectric stress at core screen (kV/cm)

2.9) Maximum overall dia. of cable (mm)

3.0) Construction details including type of material used and thickness of each material for each type of cable in a tabular form.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

GUARANTEED TECHNICAL PARTICULARS FOR CONTROL CABLE

(Bidder should indicate the guaranteed technical date of all equipments/materials for each type of rating separately)

SL. No PARTICULARS

3 Manufacturer’s type designation

4 Applicable Standard

5 Rated voltage (volts)

6 Type & Category

7 Suitable for earthed or unearthed system

8 Continuous current rating when laid in air in a ambient temp. of 50°C and for maximum conductor temp. of 70°C of PVC Cables (For information only)

9 Ration factors applicable to the current ratings for various conditions of installation.

10 Short Circuit capacity

a)Guaranteed short circuit Amp. (rms) KA for 0.12sec duration at rated conductor temperature of 90 degree C, with an initial peak of 105kA.

b). Maximum conductor temp. allowed for the short circuit duty (deg. C) as stated above.

c) Cross section area (Sq.mm)

d) Number of wires (No.) minimum

e) Form of conductor

f) Direction of lay of stranded layer

12 Conductor resistance (DC) at 20°C per km - maximum

a) Composition of insulation

b) Nominal thickness of insulation (mm)

c) Minimum thickness of insulation

14 Inner Sheath

b) Calculated diameter over the laid up cores, (mm)

c) Thickness of sheath (minimum) mm

a) Type and material of armour

b) Direction of armouring

c) Calculated diameter of cable over inner sheath (under armour), mm

d) Nominal diameter of round armour wire (minimum)

e) No. of Armour wires/stripes

f)Short circuit capacity of the armour along for 1 second – for info. Only

g) DC resistance at 200C (Ω/Km)

16 Outer sheath

a) Material (PVC Type)

b) Calculated diameter under the sheath

c) Min. thickness of sheath (mm)

d) Colour of Sheath

a) Guaranteed value of minimum oxygen index of outer sheath at 270C *

b)Guaranteed value of minimum temperature index at 21 oxygen index *

c). Smoke density rating as per IEC 61034 *

d). Maximum HCL emission as per IEC 60754-1 *

e)All the factory acceptance test to be done as per relevant IS/IEC and KPTCL specification

18 a)Overall diameter of cable

b). Tolerance of overall diameter (mm)

a) Max./standard length per drum for each size of cable (single length) with ±5% Tolerance (mtrs)

b) Non standard drum lengths

20 Whether progressive sequential marking on outer sheath provided at 1 meter interval

21 Identification of cores

a) Colour of cores

22 Whether cables offered are ISI marked

23 Whether cables offered are suitable for laying as pr IS 1255

24 1) Continuous current rating of the cable

a) In ground at soil temperature 30°C and soil thermal resistivity of 150°C cm/watt and depth of burial about a metre (A)

b) In air at 40°C (A)

c) Overload capacity and duration (A, Hr)

d) Derating Factors for :

i) Soil temperature and thermal resistivity

ii) Ambient temperature

iii) Single core cables laid in trefoil circuits

2) General Technical Data (Power cables)

2.1) Equivalent star impedance per km of 3 Ph, circuit at power frequency at maximum conductor temperature (Ohm)

2.2) Maximum electrostatic capacitance per core per km of cable (F)

2.3) Maximum charging current per conductor per km at nominalvoltage (A)

2.4) Loss tangent at normal frequency and rated voltage

2.5) Maximum dielectric loss of cable per km at normal voltage and frequency Watts/km

2.6) Short circuit capacity for 1 Sec. KA (rms)

2.7) Short Circuit current capacity of armour (kA for 1 sec)

2.8) Maximum dielectric stress at core screen (kV/cm)

2.9) Maximum overall dia. of cable (mm)

3.0) Construction details including type of material used and thickness of each material for each type of cable in a tabular form.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3947

Combined Package for, Work-A Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 110/11kV Yadwad Sub-Station in Gokak Taluk, Belagavi District. Work-B Creating 33kV reference by providing additional 1x20MVA,110/33-11kV Power Transformer at 220kV Esale Sub-Station Sirsi Taluk, Uttara Kannada District. Work-C Providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Kiruvatti Sub-Station in Yallapura Taluk, Uttara Kannada District. Work-D Creating 33kV reference by providing additional 1x20MVA, 110/33-11kV Power Transformer at 110kV Bidi Sub-Station in Khanapur Taluk, Belagavi District, on Total Turnkey Basis, including Supply of all Materials/Equipments and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning.

GUARANTEED TECHNICAL PARTICULARS FOR MCVCB / PCVCB 11KV SWITCH GEAR COMPONENTS

(Bidder should indicate the guaranteed technical data of all equipment/materials for each type of rating separately)

1) Type of instrument

3) Whether magnetically shielded or not

4) Scale length and range

5) Whether tropicalised VOID

6) Short time overload capacity

7) VA burden current coil

8) Power consumption of current coil

9) ISS grade of accuracy

10) Description leaflet

11) Temperature at which instrument calibrated

II. Multifunction Meter:

1) Type of Instrument

3) Whether magnetically shielded or not

4) Scale length & range

5) Whether tropicalised

6) Short time overload capacity

8) Power consumption

9) ISS grade of accuracy

10) Description leaflet

11) Temperature at which instrument calibrated

12) List of display parameters:

13) Communication protocol:

III. ELECTRONIC TRIVECTOR METER

1) Type and Rating

3) Whether magnetically shielded or not

4) Whether troplicalised

5) Rates VA burden – current coil - Potential coil

6) Continuous over load rating - Current coil - Potential coil

7) Accuracy class and grade

8) Adjustments provided

9) Limits of error at UPF and at 125% 25% and 10% of rated current

10) Limits of error at 0.5PF and at 125% 25% and 10% of rated current

11) Type of Registering Mechanism

12) Display sequence

13) Details of display a. Parameters that can be measured b. Details of print out parameters Refer Cl. 9.5.0 E

14) Whether the meter can be used to get demand details

15) Whether optical readout facility provided

16) Whether detailed literatures enclosed

17) Additional features provided

1 a. Type and particulars of windows b. Whether the annunciator is electro mechanical type Yes/No

1) Particulars of wiring

2) Rated voltage

3) Power consumption

4) Instantaneous making capacity of contacts

5) Breaking capacity

6) Overall dimensions of annunciator group

7) Descriptive leaflet of schematic diagram

V.(A) GENERAL PROTECTION RELAYS :

I The tenderer shall furnish guaranteed Technical particulars for all types of meters offered, in the following proforma (separate sheet shall be enclosed for each type of relay :)

1) Manufacturer's name or trade marks

2) Type designation

3) Size and mounting details (whether in draw out case)

4) Rated Values of both input and auxiliary energizing quantities

5) Values of the limits of the operative range(s) of the auxiliary energising quantity (ies)

6) Contacts data, Number and rating of main and auxiliary contacts

7) Rated value or setting range of the characteristic quantities and or angle

8) Limiting short-time thermal withstand values

9) Limiting dynamic values.

10) i. Burden data ( in case of poly input relays - data shall be furnished for appropriate set of input terminals). a. At highest tap - AC current / voltage coil b. At lowest tap - AC current / voltage (coil) ii. DC power consumption.

11) Impulse and dielectric test voltage(s)

12) Details of accessories (If essential to the relay performance)

13) Details of accessories (Optional items)

14) Whether provided with seal in trip contacts

15) a. Type of operating characteristics b. Accuracy of operating characteristics, operating time with details

16) H.F. disturbance test voltage (s)

17) Whether literature enclosed

18) Type of relay flag indicator and rating of target coil

VI (B) PROTECTIVE RELAYS

1 Non-directional IDMT Inst. OCREFR Relays

b) Current coil rating

c) VA burden 1) Highest tap 2) Lowest tap

e) Power consumption 1) Highest tap 2) Lowest tap

f) Time of operation at maximum dial setting at: 1) 5 times tap setting current 2) 10 times tap setting current

g) Type of characteristics

h) Whether drawout type or not

i) Trip Contact Rating amps.

j) Whether seal in contacts provided or not.

2 DIRECTIONAL OVER CURRENT RELAY

b) Current coil rating

c) VA burden i. Highest tap ii. Lowest tap.

e) Power consumption 1) Highest tap 2) Lowest tap

f) Time of operation at maximum dial Setting at: 1) 5 times tap setting current 2) 10 times tap setting current

g) Type of characteristics

h) Whether draw out type or not

i) Trip contact rating amps.

j) Whether seal in contacts provided or not

k) Minimum voltage at which relay operates

VII CIRCUIT BREAKER:

1 RATING a. No. of poles b, Rated voltage c. Rated normal current d. Rated frequency e. Making capacity in peak kA f. Breaking capacity : i) Symmetrical in KA and MVA i) Assymmetrical ii) The maximum Capacity of the Capacitor bank for which the breaker is designed to open g. Short time current in kA h, Operating duty

2 DETAILS OF SHORT CIRCUIT TYPE TEST CERTIFICATES

3 CONSTRUCTIONAL PARTICULARS: a. No. of breaks in series per pole b. Total length of breaks per pole c. Type of main contacts d. Type of arcing contacts e. Type arc control device f. Min. clearance in air a) Between live parts b) Between live parts and earth g. minimum clearance in VCB h. Mechanical endurance i. Electrical endurance j. Method of closing mechanism i) Type of operating mechanism ii) Whether hand or power or both iii) Whether the circuit breaker is designed to close and latch on making or is fitted with a making current release. iv) Whether the circuit breaker is trip free. v) Time required to charge the spring. vi) Details of spring charging motor power required at designed normal voltage k. Normal voltage of shunt trip coil l. Power required at normal voltage in VA

4 OPERATING PARTICULARS

a. a. Opening time

a) With no current b) At rated breaking current

b. Closing arc duration at

a) 10% SC breaking current b) 60% SC breaking current C) 80% SC breaking current d) 100% SC breaking current