SPECIAL REPAIR TO BLDG NO P-11B AT AHMEDABAD CANTT

Amount

Dismantling Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section in any position in unframed work as in rafters, purlins etc complete all as specified and directed.

All as per Item No. 2 above but in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed.

Dismantling wall and ceiling boards any thickness including cover fillets complete all as specified and directed.

Demolition of Brickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F mild steel angles as in columns, posts, purlins rafters beams gusset plate, MS flats and struts including embedding in concrete, and welding etc complete all as specified and directed. Fe-410-W Gde-E-250 quality A

Taking down cement plaster on wall of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.

M & L 15mm thick rendering cement plaster on brickwork or concrete surfaces in cement mortar 1:6 , finishing the surfaces even and fair complete all as specified and directed.

M&L rendering on fair faces of brick work in two layers i.e 10 mm thick in CM(1:6) and top layers of 05 mm thick in CM (1:4) mixed with water proofing compound in top layer @ 3% by the weight of cement or as per manufacturers instructions finishing the surface fair and even without using extra cement complete all as specified.( WPC mesured separetly) complete all as specified and directed.

Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed

M & L applying 1 mm thick (minimum) wall care putty on wall complete all as specified and directed

M&L for preparation of new plastered surfaces on walls and applying two coats of oil oil bound distemper with Priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed

M&L preparing newly plastered or unplastered surface of wall and applying three coats of white washing complete all as specified and directed.

M&L for preparation of new plastered surfaces on walls and applying two coats of cement based paint over one coat of Primer on walls complete all as specified and directed.

M & L for complete removal of existing treatment and applying two coats cement based paint on over one coat of primer on complete all as specified and directed by Engr- in-Charge

M & L for complete removal of existing treatment on walls and applying two coats of oil bound distemper and a coat of primer complete all as specified and directed

M & L painting to steel and iron surfaces of any description, over 10 cm with or girth not otherwise described with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new surface complete all as specified and directed.

S & F floor door stopper of brass body and tongue with hard drawn steel spring overall length of cover plate150mm complete all as specified and directed.

S&F 4mm thick coloured textured designer ceiling board (Everest) of size 595X595 mm fixing with screws/clips including Tee grid suspension system of size 600 mm x600 mm type-1 made out of roll framed hot dipped galvanised steel zinc coated of not less than 120 gm/sqm ,main runner shall be 0.3 mm thick of section 24 mmX33 mm cross runner 0.3 mm thickof section 24 mmx25 mm,wall angle shall be 0.63 mm thick of section 24 mmx24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod ,system exposed portion shall be pre painted polyster coated in off white/white in colour complete with material,fixing, jointing etc complete all as specified and directed.

S & F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F mild steel Gde Fe 410-O or Fe 310-O Chowkhats and frames of door shutters ( any type, size etc.) of angle, Tee or any section with MS plates/ gusset plates, cleats, hold fast etc including fixing (except provision thereof) of hinges by welding, all as specified and directed.

M & L brick work with sub class 'B' bricks old size straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6 , complete all as specified and directed.

M & L for Preparing surface and crosoting of wood and wood based materials old, of any description and girth, not otherwise described and treated with creosote complete all as specified and directed.

M&L PCC (1:2:4) type B-0 using 12.5 mm gradedcrushed stone aggregate as in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed.

Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S & F powder coated anodised Aluminium alooy sections sliding windows with frames of Jindal or equivalent and 3 track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4.8 mm nominal thickness one shutter with stainless steel wire cloth .36mm dia and average width of aperture 1.4mm , aluminium alloy handles/lock etc. complete all as specified and directed. Note: Thickness of chowkhats/Frame section and sliding shutter section shall be minimum 1.5mm (Note :Rates include all glazing/aluminium wire cloth, rubber packing, jointing cleats, glazing clips, aluminium snap beading, locking arrangements, handle, plastering and finishing the surface to match the exisiting surface after fixing of window.)

Taking down carefully surface aluminium or copper point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete all as specified and directed.

M&L for point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - R Y B, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed modular steel terminal boxes of thickness not less than 1.2 mm covered with suitable and required size of modular box, plate with cover for mounting switches, sockets, fan regulators complete including making good the wall surfaces with matching colour on wall for the following (Cable Make : Havells / Polycab / Finolex / Plaza as approved):-

Note : Including Cutting chases,pinning in ,making good for facings where required and pointing the cement mortar 1:3 to ends or edges of landings,steps,cills,sun shades,shelves,lintels etc and cutting chases for concealed conduit wiring etc and making good ,cutting not exceeding 10cm grith complete all as specified and directed.

One light point controlled by one switch.

One fan point/Exhaust controlled by one switch.

One socket outlet 6 amp controlled by one switch on the same board with other switches.

One socket outlet 6 amp controlled by one switch on indepdendent board.

One bell point controlled by one bell push.

M&L for point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 4 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with suitable and required size of modular box, plate with cover complete for one 16 amp socket outlet controlled by one switch on independent board including making good the wall surfaces with matching colour on wall complete all as specified and directed.

S&F modular switch one way 6 amp 1 module complete all as specified and directed.

S&F modular switch one way 16 amp 1 module complete all as specified and directed.

S&F modular bell push, 6 amp, 1 module complete all as specified and directed.

S&F door bell, AC, 240 volts, single pole complete all as specified and directed.

S&F modular socket 6/16 - 2/3 pin combined 2 module complete all as specified and directed.

S&F modular socket 6 amp 2/3 pin combined 2 module complete all as specified and directed.

S&F modular hum free electronic step fan regulator, 100 watt 2 module complete all as specified and directed.

S&F angle holder, insulated polycabonate body with back plate complete all as specified and directed.

S&F LED Lamp 12 watt 230 volts complete all as specified and directed.

S&F ceiling rose 3 plates polycarbonate body complete all as specified and directed.

M & L for replacement of existing old u/s submain wiring with two single core PVC insulated flexible copper conductor cable of size 4 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 4 Sqmm as earth lead in and including concealed PVC conduit and making good the disturbed wall surfaces to match with existing specification all as required at site complete all as specified and directed.

M & L for replacement of existing old u/s submain wiring with two single core PVC insulated flexible copper conductor cable of size 6 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 6 Sqmm as earth lead in and including concealed PVC conduit and making good the disturbed wall surfaces to match with existing specification all as required at site complete all as specified and directed.

S&F LED 20W Aluminium batten (4 Ft ) made of Aluminium housing integrated LED driver with a PC glossy difusser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 105 lumens per watt and total power consumption not less than 20 watt including driver. having bipin holder, connector block etc complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or complete all as specified and directed. .Make: Wipro Cat No-D552065 or equivalent in Phillips, Crompton, Havells.

Supply and Fix in replacement existing unsv sleek LED mirror light fitting 1x10 W Aluminium batten (2 Ft ) connector block etc complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site complete all as specified and directed..Make Cromptom Cat No LDLL10-WW or equivalent in Phillips, Wipro, Havells.

Supply and fixing 1200 mm sweep ceiling Fan,Energy saving 5 star Rated,With Remote control and BLDC Motor complete with canopy, blades downrod,split pin etc complete of approx wattage 30 to 32 watt rated suitable for operation on AC 220-240V AC,50HZ,PF>0.95, Air delivery approx 230 cum/min with 5 speed control including taking down and depositing to MES storeyard .Make Havells Efficiencial (BLDC 32 Watt) ,Panasonic Model DC F-12XDA (BLDC) or equivalant in Crompton,Bajaj

Supply & Ventilation fan AC sinlge phase 230/240 volts of size 225mm sweep having plastic body with louvre including connecting to ceiling rose all as required or directed including connecting to ceiling rose, including taking down and depositing to MES storeyard all as required complete all as specified and directed.

Supply and fixing sheet metal enclouser single pole and neutral with a 2 pin and earth plug and socket 20 A 240V complete with one single pole MCB of capacity 20 A complete all as specified and directed.

Supply & Fixing for sheet metal enclosure MCB distribution board, double door with IP43 -IK09protection single phase 240 volts 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification

Supply & Fixing for sheet metal enclosure MCB distribution board, double door with IP43 -IK09protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

S & F in replacement existing unsv distribution board iron clad, double door with IP-54 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link complete with one MCCB 4 pole 415 Volts 125 Amps rating with rupturing cap 16 KA of the same make as of distribution board & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or complete all as specified and directed Engr-in-Charge (Outgoing MCB will be measured separately).

M & L for replacement of existing unsv MCB single pole 240 volts any rating from 6 to 32 amps, with rupturing capacity 10 KA,including providing thimble for out going cables complete all as specified and directed.

M & L for replacement of existing unsv MCB SPN 240 volts any rating from 20 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.

Supply and fixing for replacement of old unsv bldg light LED Bldg light fittings on Bldg of height not exceeding 7.5 mtrs, comprising of epoxy powder coated housing, enclosed with glass cover in frame, for efficiency not less than 95 lumens/Watt, and minimum wattage capacity of 20 Watt complete all as specified and directed.

Supply and fixing in replacement existing unsv integrated LED bulk head light fitting 1X10 watts suitable complete, connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm all as required.

Supply and fix Water heater storage type, electric,capacity 25 litres.BEE 5 star rated suitable for 8 bar pressure with nano polymer coated tank, incoloy heating element,rust proof ABS body, including taking down and depositing to MES storeyard complete all as specified and directed.

M&L Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground (Earth pit not less than 2.25 Mtr deep below normal ground level )with top edge of the plate not less than 1.5 Mtr below normal ground level connecting with galvanized iron GI earth wire 4mm dia by means of bolt nut check nuts and washers of galvanized iron and provision of GI tubing medium grade (ISI marked)of size 15mm for protection of GI earth wire upto test point, 20mm dia GI light grade watering pipe with funnel and wire mesh, RCC pit cover of size 300x300x40mm reinforced with XPM having weight not less than 4Kg/sqmm including 6mm thick MS bar handle made to shape, PCC pit with 1:3:6 type C1 with angle iron frame made of angle iron of size 40x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate, excavation , earth work in any type of soil, removal of excavated soil and returning filling in all as required at site complete all as specified in plate No 3 of SSR Part-I and all as specified or indicated including testing on completion.

NOTE :-Rates inclusive of necessary excavation in any type of soil, earth work, PCC pit, RCC cover, funnel with watering pipe, GI earth strip upto 7.5 m long for connecting to test point etc. all as required at site for complete earthing) complete all as specified and directed.

Supply, laying and testing of LT UG cable, XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35Sq mm X 3.5 Core complete all as specified and directed. Note: Earth work ( Excavation, Returning & refilling and removal), sand cushining , cable protection cover, GI protection pipe shall be measured and paid for seperately under respective item of Sch 'A'.

Excavation in trenches in any type of hard/dense soil n exc 1.5 mtr in width and n. exc 1.5 mtr in depth and getting out all as required for laying of cables,Foundation filling of poles or stays.

Returning filling, in including spreading ,leveling, watering and well ramming in layers not exc 25 cm each all as required.

Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point.

M & L for good quality dry sand cushioning to under ground electric cable on layer of 8 cm thick before laying the cable and second layer of 15 cm thick after laying the cable all as specified in clause 19.75 of MES Schedule part-I (2009) Note : Sand shall be fined sand as specifed and punned thickness shall be measured and paid.

Supply and laying sub class 'B' bricks of old size (230x115x75 mm) or of size locally available , laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer-in-Charge

M&L for taking out of unserviceable LT cable XLPE, aluminium armoured type size 35 Sqmm,3.5 core complete all as directed.

Taking down of existing sheet metal enclouser single pole and neutral with a 2 pin and earth plug and socket 20 A 240V complete and directed all as directed.

Taking down of existing VTPN DB with MCCB any type and MCBs any capacity complete and directed all as directed.

Taking down carefully aluminium or copper submain wiring any size with PVC surface conduit or casing caping and making good disturbed surfaces complete.

Taking down MCB distribution boards with incoming and outgoing controls with MCBs any capacity after disconnecting complete.

nirman construction

TECH SERVE SOLUTIONS