REPAIR/ MAINT AND PAINTING / POLISHING OF MAP FURNITURE INCLUDING REPAIR CONVERSION OF CHARPOY GI PIPE WITH NEWAR TO PLYWOOD TOP UNDER GE (S) BINNAGURI

Amount

Almirah Large Steel (FD-E/MAP/18, FD-1031)

(a) M & L for taking out loose leg (right/left) and re-fixing the same in existing position with necessary run welding of Almirah large complete all as specified and as directed. (Note :- Thickness of metal to be welded shall not exceed 2 mm).

(b) Taking out and removing the old damaged bottom leg (right/left) and S & F new bottom leg made out of 20 gauge plain mild steel sheet (MS Sheet), made existing shape and fixed in the same position by run welding including painting with one coat OG synthetic enamel paint (1st grade quality) over a coat of red oxide primer by spray machine complete all as specified and as directed.

(c) Taking out loose shelf from Almirah large steel and re-fixing the same rigidly after minor repairs by providing new chips, nut & bolts of existing size as required complete all as specified and as directed.

(d) M & L for run welding in repairs to broken/damaged sides (left/right), back & top of almirah steel large complete all as specified and as directed (Note :- Thickness of materials to be welded not exceeding 2 mm in thickness and length of each welding exceeding 9 mm but not exceeding 20 mm in length.)

(e) Repair of existing loose hinges by spot welding and make it functional by providing new steel pin including greasing etc required for smooth function complete all as specified and as directed.

(f) Taking out and removing existing unserviceable damaged lock from almirah (Large steel) and S & F new 6 lever steel lock as per existing shape and size with Keys in duplicate complete all as specified and as directed .

(g) Taking out old and removing old unserviceable handle from Almirah steel large and S & F steel chromium plated handle 125mm long of existing shape and size complete all as specified and as directed.

(h) Taking out and removing of old broken/damaged steel door shutter with necessary cutting in square /rectangle in shape and S & F the same dhutter as per existing size and shape not exceeding 100 sq cm each made out of 20 Gauge plain mild sheet (MS Sheet) fixed by run welding of required length including applying applying one coat of synthetic enamel paint (1st grade quality) over a coat of red oxide primer by spray machine all complete as specified and as directed.

(i) Taking out old unserviceable/damaged bottom shelf from its position and S & F new bottom shelf as per existing shape and size made out of 20 Gauge Plain mild sheet (MS Sheet) and fixed in the same position with shelf clips, nut and bolts etc including painting with one coat of OG synthetic enamel paint (1st grade quality) over a coat of red oxide primer by spray machine before fixing complete all as specified and as directed and shown on drawing.

(j) Taking out old unserviceable /damaged intermediate shelf from its position and S & F new intermediate shelf as per existing shape and size made out of 20 Gauge Plain mild steel sheet (MS Sheet)by providing new hinges and make it smooth functional including applying painting with one coat of OG synthetic enamel paint (1st grade quality) over a coat of red oxide primer by spray machine before fixing complete all as specified and as directed and shown on drawing.

(k) Taking out and removing of old broken /damaged steel of door shutter (left/right) from almirah large steel and S&F new door shutters as per shape and size made out of 20 Gauge plain mild sheet (MS Sheet)by providing new hinges and make it smooth functional including applying one coat of synthetic enamel paint (1st grade quality) over a coat of red oxide primer by spray machine all complete as specified and as directed and as shown on drawing.

(l) M & L for painting to Almirah Steel large by spraying on both side (outer/inner surface) including legs, door shutter and shelves with applying one coat of OG synthetic enamel paint (1st grade quality) by spray machine including preparation of old painted surfaces including applying ready made putty wherever required for making good cavities complete all as specified and as directed.

Charpoy IP Hard Top (FD/MAP-II/01)

(a) M&L for spot welding in repair of broken steel leg of charpoy IP Hard Top all as specified and as directed. Note : Each spot welding shall not esxc 5cm in length asnd materials to be welded not exc 2mm in thickness.

(b) Taking out and removing the old damaged / broken plywood from its position and S&F new plywood BWR 12mm thickness in the same position as per existing shape and size all as specified and as directed. Make of ply : Kitply/greenply/century

( c) S&F new rubber shoes of best quality to the bottom of leg after taking out old damaged / unserviceable shoe from its existing position complete all as specified and as shown on drg

(d) Taking out old damage /broken stifner from its position and S&F new stifner in the same position of size 25mmx25mmx16mm guage MS tube shall be fixed through spot welding all as specified and as directed. Thickness of metal to bewelded shall not exceed 2mm.

(e) M&L for preparation of old painted steel surfaces of charpoy IP Hard top and applying one coat of black synthetic enamal paint ( Ist grade quality ) on all exposed steel furfaces by sprayig all as specified and as directed.

Table Peg ( FD-384)

(a) Taking out old damaged / decayed top form its position and S&F new top made with 18/19mm thick mdf grade including 4mm thick well seasoned 1st class teak wood beading all round complete all as specified & as directed and as shown on drawing.

(b) Taking out old damaged / decayed long rail (front/rear) from its position and supply of fixing new long rail as per existing shape and size made out of well seasoned 1st class ‘Teakwood’ timber all as specified and shown on drawing.

(c) ‘-Ditto- all as per item No 22(b) above but for short rail (right/ left) and ‘-ditto-

(d) ‘-Ditto- all as pr item No 22(b) above but for leg and ‘-ditto-

(e) M&L for applying French polish with high glossy finish to exposed wooden surfaces including preparation of surfaces and applying wood filler wherever required complete all as specified and as directed.

(f) Taking out old unserviceable / damaged shoes and S&F new PVC/hard rubber shoes in leg complete all as specified and directed.

Teapoy (FD-382)

(a) Taking out old damaged / decayed top form its position and S&F new top made with 18/19mm thick mdf board exterior grade including 4mm thick well seasoned 1st class teak wood beading all round complete all as specified, directed and shown on drawing.

(b) Taking out old damaged / decayed long rail (front/rear) from its position and supply of fixing new long rail as per existing shape and size made out of well seasoned 1st class ‘Teakwood’ timber including applying one coat of French polish over wood filler in all exposed timber surfaces complete all as specified and shown on drawing.

(c) ‘-Ditto- all as per item No 29(b) above but for short rail (right/ left) and ‘-ditto-

(d) ‘-Ditto- all as pr item No 29(b) above but for leg and ‘-ditto-

(e) M&L for applying two coat of French polish finish to exposed wooden surface including preparation of surface and applying wood filler to new components complete all as specified and as directed.

(f) Taking out old unserviceable / damaged shoes and S&F new PVC/hard rubber shoes in leg complete all as specified and directed.

Table Centre (FD-274)

(a) Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18/19mm thick pre-laminated particle board exterior grade including 4mm thick 1st class teak wood beading all round complete all as specified,directed and shown on drawing.

(b) Taking out old damaged / decayed leg from its position and S&F new leg in the same position as per existing shape and size made out of well seasoned 1st class ‘Teak Wood’ timber completed all as specified and shown on drawing.

(c) Taking out old damaged / decayed long rail from its position and S&F new long rail in the same position as per existing shape and size made out of well seasoned 1st class teak wood’ timber complete all as specified,directed and shown on drawing.

(d) -Ditto- all as per items No 37(C) above but short rail and –ditto-

(e) M&L for applying complete polishing with french polish two coats glossy finish to wooden surfaces including existing/replaced parts preparation of surfaces and applying wood filler whenever required complete all as specified,directed and shown on drawing.

(f) Taking out old unserviceable / damaged shoes and S&F new PVC /hard rubber shoes with screw in leg complete all as specified and directed.

Table Dining six Persons (FD-/E6/MAP-II/03)

(a) Taking out old damaged/decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18/19 mm thick commercial particle board covered with 1mm thick plastic laminated sheet with mysore teak face shead on top, fixed with approved adhesive as per manufacture instruction including providing teak wood beading all round complete as specified & as directed and as shown on drawing .

(b) Taking out old damaged/decayed long rail from its position and S&F new long rail in the same position as per existing shape and size made out of well seasoned ‘Teakwood’ timber including applying one coat of French polish over wood filler over exposed new timber surfaces completed all specified & as directed and as shown on drawing.

(c) -Ditto- all as per item No 43(b) above but short rail and –ditto-

(d) -Ditto- all as per item No 43(b) above but leg and –ditto-

(e) M&L for applying French polish glossy finish to exposed wooden surfaces after preparation of surfaces applying wood filler wherever required complete all as specified & as directed and as shown on drawing.

Chair Writing (FD/E6/MAP/12)

(a) Taking out old damaged tapestray cloth and replace it with new tapestray cloth as per existing shape after approval of tapestray cloth complete all as specified and as directed and as shown on drg.

(b) M /L for prepration of old painted steel surfaces of chair writing and applying one coat of black enamel paint (1st grade quality) on all exposed steel surfaces complete allas specified.

Chair Easy (FD-17(M), FD-229)

(a) Taking out old damaged/decayed front leg from its position and S & F new front leg in the same position as per existing shape and size made out of well seasoned ‘TEAK WOOD’ timber including providing hard rubber ring fixed with screws at the bottom of the leg including applying one coat of French polish over wood filler over exposed new timber surfaces complete all as specified and shown on drg.

(b) -Ditto- all as per item No 51(a) above but for rear leg and –ditto-

(c) Taking out old damaged/decayed back front top rail from its position and S & F new top rail in the same position as per existing shape and size made out of well seasoned ‘TEAK WOOD’ timber including making holes for re-canning including applying one coat of French polish over wood filler on exposed new timber surfaces complete as specified and shown on drg.

(d) -Ditto- all as per item Ser No 53(c) above but for side top rail (left/right) and -ditto-

(e) -Ditto- all as per item Ser No 53(c) here-in-before but for rear top rail –ditto-

(f) Taking out old damaged/decayed bottom side rail (right/left) from its position and S & F new side rail in the same position as per existing shape and size made out of well seasoned ‘TEAK WOOD’ timber including applying one coat of French polish over wood filler wherever required overexposed new timber surfaces complete as specified and as directed.

(g) -Ditto- all as per item Ser No 56(f) above but for front bottom rail and -ditto-

(h) -Ditto- all as per item Ser No 56(f) above but for rear bottom rail and -ditto-

(i) Taking out and removing all unserviceable worn out plastic cane from seat and back of chair easy and re-canning the same with white plastic cane 2mm wide oval type in seat and back by weaving and 4 mm wide for bordering complete.

(j) Taking out old damaged/decayed hand rest from its position and S & F new hand rest in the same position as per existing shape and size made out of well seasoned ‘TEAK WOOD’ timber including applying one coat of French polish over wood filler over exposed new timber surfaces complete as specified as shown on drg.

(k) M & L for applying French polish glossy finish to exposed wooden surfaces including preparation of surfaces applying wood filler wherever required compete as specified and as directed.

Chair Dining (FD-/MAP-II/05)

(a) Taking out old damaged/decayed front leg from its position and S & F new front leg as per existing shape and size in the same position made out of well seasoned ‘TEAK WOOD’ timber including Hard rubber ring complete all as specified and as shown on drawing.

(b) All as per item Ser No 63(a) here-in-before but for rear leg

(c) Taking out old damaged /decayed seat rail (Front, back and sides) (left/right) from its position and S & F new seat rail in the same position as per existing shape & size made out of well seasoned ‘TEAK WOOD’ timber making suitable hole for canning complete all as specified and as shown on drg

(d) Taking out old damaged /decayed leg stiffener from its position and S & F new leg stiffener as per existing shape and size in the same position made out of well seasoned ‘TEAK WOOD’ timber complete all as specified and as shown on drg

(e) All as per item Ser No 66(d) here-in-before but for back rest

(f) Taking out and removing all unserviceable / damaged seat frame PVC of chair dining and fixing with new seat frame PVC all as per specified and as shown on drg and as directed.

(g) M & L for applying French polish glossy to all wooden surfaces both old and new surfaces after necessary preparation of surfaces including wood filler to component all as specified and as directed

Table Writing (FD-275)

(a) Taking out old damaged /decayed short legs from its position and S&F new short leg (right/left) in the same position as per existing shape and size made out well seasoned Teak Wood timber including applying one coat of french polish over wood filler over exposed new timber surfaces complete all as specified and as shown on drg.

(b) - Ditto - all as per Ser No 71 (a) above but for rear leg (left/right) and - ditto -.

(c) Taking out of old damaged/decayed plywood back from its position and S&F new 6mm thick commercial plywood 'B' grade BWR fixed in the same position as per existing shape and size including and applying one coat of French Polish over wood filler over on new plywood surfaces complete all as specified and as directed and as shown on drg.

(d) Taking out old damaged/decayed stiffener bottom (right/left/rear) from its postion and S&F new stiffener in the same postion as per existing shape and size made out of well seasoned 'Teak Wood' timber including applying one coat of French Polish over wood filler on exposed new timber surfaces complete all specified and as directed and as shown on drg.

(e) Taking out old drawer from its position and minor repair of the same which required for as directed and placing the drawer in old position complete all as specified and as directed and as on drg.

(f) Taking out old damaged/decayed front shutter of table writing from its position and S&F new front shutter of size 450x350mm made out of 18mm thick particle board with one face teak decorative face including 4mm thick teak wood beading all round and fixed with two nos 50mm brass hinges including applying one coat of French Polish over wood filler on exposed new timber surfaces complete all as specified and as directed and as shown on drg.

(g) Taking out of old damaged sides (left/right) from its position and S&F new sides made out of 18mm thick with teak decorative teak veneered faced one side size 600mm x 560mm including 4mm thick teak wood beading on front side including applying one coat of French polish over wood filler on exposed new timber surfaces complete all as specified and as directed and as shown on drg.

(h) Taking out old damaged/decayed top from its postion and S&F new top as per existing shape and size made out of 18mm thick pre laminated particle board one side teak face and one side white balancing including 4mm thick teak wood beading all around complete all as specified and as directed.

(i) Taking out old damaged/decayed cupboard shelf from its postion and S&F new cupboard shelf in the same position as per existing shape and size made out of 12mm thick plywood commercial including 4mm thick teak wood beading in front side including applying one coat of French Polish to all exposed timber and plywood surface complete all as specified and as directed.

(j) Taking out unserviceable knob from its postion and S&F new 25mm dia brass knob CP in the same position with a new bras screw/nuts/bolts and washer complete all as specified and as directed and as shown on drg.

(k) M&L for applying French Polish glossy finish to wooden surface except top including preparation of surfaces and applying wood filler wherever required complete all as specified and as directed and as shown on drg.

Table Bed side (FD-/E6MAP/15( R))

(a) Taking out old damaged decayed leg from its position and S&F new leg in the same position as per existing shape and size made out of well scasoned `Kalasiris' timber including applying one coat of french polish wood filler over exposed new timber surfaces complete all as specified & as directed and as shown on drawing.

(b) Taking out old damaged decayed top from its position and S&F new top in the same position as per existing shape and size made out of 18/19mm thick commercial particle board covered with 1mm thick plastic laminated sheet of mysore teak face to top fixed with adhesive as per manufactures instruction including 4mm thick teak wood beading all round complete all as specified & as directed and as shown on drawing.

(c) Taking out old damaged decayed side from its position and S&F new side in the same position as per existing shape and size made out of 18/19mm thick particle board grade-I quality interior grade decorative teak veneered face one side including 4mm thick teak wood beading on front side including applying one coat of french polish over wood filler over exposed new timber surface complete all as specified & as directed and as shown on drawing.

(d) Taking out old damaged / decayed shelf from its position and S&F new shelf in the same position as per existing shape and size made out of 18/19mm thick commercial particle board with teak wood beading on front side including applying one coat of french polish over wood filler over exposed new timber surface complete all as specified & as directed and as shown on drawing.

(e) Taking out old damaged decayed Plywood back from its position and S&F new 6mm thick commercial plywood grade BWR in the ame position as per existing shape and size including applying one coat of french polish over wood filler over one new plywood surfaces complete all as specified & as directed and as shown on drawing.

(f) Taking out old damaged / decayed bottom base from its position and S&F new bottom base in the same position as per existing shape and size made out of 18/19mm thick commercial particle board complete all as specified & as directed and as shown on drawing.

(g) Taking out old damaged / decayed stiffners from its position and S&F new stiffners in the same position as per existing shape and size made out of well seasoned `KALASIRIS' timber including applying one coat of french polish over wood filler ove exposed new timber surfaces complete all as specified & as directed and as shown on drawing.

(h) M & L for applying french polish glossy finish to all exposed wood surface after preparation of surfaces and applying wood filler wherever required complete all as specified & as directed and as shown on drawing.

Side Board (FD-1112)

(a) Taking out old damaged /decayed leg from its position and S&F new leg in the same position as per existing shape and size made out of well seasoned ‘Teak Wood’ timber including applying one coat of French polish over wood filler over exposed new timber surfaces complete all as specified & as directed by Engr-in-Charge and as shown on drawing.

(b) Taking out old damaged /decayed long rail from its position and S&F new long rail as per existing shape and size made out of well seasoned ‘Teak wood’ timber fixed in the same position including applying one coat of French polish over wood filler over exposed new timber surfaces complete all as specified & is directed Engr-in-Charge and as shown on drawing.

(c) -Ditto- all as per Ser No 93 (b) above but short rail and –ditto-

(d) Taking out old damaged /decayed bottom from its position and S&F new bottom base in the same position as per existing shape and size made out of 18mm thick well seasoned teak wood complete all as specified & as directed by Engr-in-Charge and as shown on drawing.

(e) Taking out old damaged /decayed door shutter from its position and S&F new door shutter both part made out of 18mm thick pre-laminated particle board with both side teak face 4mm thick teak wood beading all round and fixed with new brass hinges 50mm long with brass screw including applying one coat of French polish over wood filler over exposed new timber surfaces complete all as specified & as directed Engr-in-Charge and as shown on drawing .

(f) Taking out old damaged /decayed ply wood back from its position and S&F new back made out of 6mm thick commercial ply wood fixed in the same position as per existing shape and size including applying one coat of French polish complete all as specified & as directed and shown drawing .

(g) Taking out old damaged /decayed top from its position and S&F new top in the same position as per existing shape and size made out of 18mm thick pre-laminated particle board both side teak face all as specified & as directed by Engr-in-Charge and as shown on drawing .

(h) Taking out old damaged /decayed drawer from its position and S&F new drawer as per existing shape and size made out of well seasoned Teakwood’ timber at all sides with 4mm wide teakwood edging at front side and 6mm thick commercial plywood at bottom including applying one coat of French polish over wood filler over exposed new timber surfaces complete all as specified & as directed and as shown on drawing

(i) Taking out old damaged /decayed sides from its position and S&F new sides (Left/Right) in the same position as per existing shape and size made out of 18mm thick pre-laminated board teak decorative one face including 4mm thick ‘teak wood beading on front side including applying one coat of French polish over wood filler over exposed new timber surfaces complete all as specified & as directed Engr-in-Charge and as shown on drawing

(j) Taking out old damaged /decayed insides partition from its position and S&F new partition the same position as per existing shape and size made out of 18mm thick pre-laminated particle board complete all as specified & as directed and as shown on drawing.

(k) Taking out old damaged shelf from its position and S&F new shelf as per existing shape and size made out of 18mm thick pre-laminated particle board in the same position complete all as specified & as directed as shown on drawing.

(l) S&F new 26mm round brass chromium plated knob fixed with brass screw / nuts and bolts and washer after taking out old unserviceable knob from its position complete all as specified & as directed and as shown on drawing.

(m) M&L for applying French polish glossy finish in all wooden surfaces of side board including preparation of surfaces including applying wood filler wherever required complete all as specified & as directed and as shown on drawing.

Hat Stand with mirror (FD-233)

(a) S&F new 18/19mm pre-laminated particle board grade-I quality one side teak face exterior grade after taking out old damaged / decayed particle 6mm thick teak wood edging all round and re-fixing old serviceable mirror metal peg /brass peg in the same position including applying one coat of French polish over wood filler over exposed new timber surfaces complete all as specified & as directed and as shown on drawing.

(b) Taking out old damaged / decayed metal peg /brass peg from its position and S&F new brass peg as approved in the same position as per existing shape and size complete all as specified & as directed by Engr –in-Charge and as shown on drawing.

(c) Taking out old unserviceable mirror from its position and S&F new mirror as per existing shape and size in the same position complete all as specified & as directed by Engr-in-Charge and as shown on drawing .

(d) M&L for applying French polish glossy to all exposed wooden & particle board surfaces including preparation of surfaces applying wood filler wherever required complete all as specified & as directed by Engr-in-charge and as shown on drawing

Chair Verandah (FD/MAP-II/15)

(a) M & L in repairs to broken steel frame not exc 2.5 cm in lengh by spot welding complete as specified and all as directed and as shown on drawing. (Note :- Material to be welded not to exceed 2.00mm in thickness)

(b) M&L for applying one coat of white synthetic enamel paint (1st grade quality) all exposed steal surface of chair verandah including preparation of old painted surface by spray machine complete all as specified and as directed.

(c) Taking out old existing damaged / worn out unserviceable plastic cane/newar from seat and back of chair verandah and supply and fix the same seat and back with new white cane 4mm wide 1mm thick half round (oval type) mat pattern as per trade practice complete as specified and as shown in drawing.

(d) Taking out old unserviceable shoes from leg of chair verandah and S&F new hard rubber shoes of best quality complete all as specified and as shown on drawing.

Rack Shoe Steel (FD/E6/MAP-II/2( R))

(a) M & L for spot welding in repairs not exc2.50cm in length of broken structure complete all as specified and as shown on drawing. (Note :- Material to be welded not to exceed 2.00mm in thickness)

(b) M&L for applying one coat of black synthetic enamel paint (1st grade quality) on all exposed steel surface of Rack shoe steel including preparation of old painted surface by spray machine complete all as specified and as directed.

Table Dressing gents with Mirror (FD/E6/MAP/16)

(a) Taking out old damaged Mirror frame from its posn and S&F new mirror frame made of well seasoned `KALASIRISH' timber as per existing shape and size including key plate of F-I 3mm thick and 5mm thick plywood back grde on quality exterior gde complete all as specified & as directed and as shown on drawing.

(b) Taking out old damaged / decayed back ply from Mirror frame and S&F new back ply 6mm thick gde-I commercial all as per existing shape and size complete all as specified & as directed and as shown on drawing.

(c) Taking out old UNSV mirror from its posn and S&F new mirror of Make: Golden Fish / equivalent fixed in the old position complete all as specified & as directed and as shown on drawing.

(d) M & L for applying one coat of french polish glossy finish to exposed wooden surface including preparation of surfaces and applying wood filler to new components complete all as specified & as directed and as shown on drawing.

Sofa Set 5 Seater wooden (FD-MAP-II/02)

(a) Material and labour for removing of old UNSV back long rail from sofa 5 seater and(3+1+1) replacing with 1st class hard wood (TW) of size 35 x 70 x 1680mm as per drawing and as directed by Engineer-in-Charge.

(b) All as per item No 124(a) above but stifner in seat/back of sofa of size 20 x50 x 600mm as per drawing and as diirected by Engineer-in-charge.

(c) All as per item No 124(a) above but handle of sofa set 5/single seater.

(d) Taking down worn out/damaged tapesty and lining cloth from foam cushion of size 21" x22" x100mm foam and supply and stiching new lining cloth and finally covering entire foam with new tapesty cloth shade and colour as approved complete all as directed by Engineer-in-charge.

(e) M&L for preparation of wooden surfaces of sofa 5 seater and applying one coat of French polish including applying of wood filler wherever required all complete as specified & as directed and as shown on drawing.

Sofa Set 4 seater wooden (FD-MAP-II/02)

(a) Material and labour for removing of old UNSV back long rail from sofa 4 seater (2+1+1) and replacing with 1st class hard wood (TW) of size 35 x 70 x 11120mm as per drawing and as directed by Engineer-in-Charge.

(b) All as per item No 130(a) above but stifner in seat /back of sofa of size 20 x50 x 600mm as per drawing and as diirected by Engineer-in-charge.

(c) All as per item No 130 (a) above but handle of sofa set 4 / single seater.

(d) Taking down worn out / damaged tapesty and lining cloth from foam cushion of size 21" x22" x100mm foam and supply and stiching new lining cloth and finally covering entire foam with new tapesty cloth shade and colour as approved complete all as directed by Engineer-in-charge.

(e) M&L for preparation of wooden surfaces of sofa 4 seater and applying one coat of French polish including applying of wood filler wherever required all complete as specified & as directed and as shown on drawing.

Repair to Charpoy GI pipe with Newar/plywood top

Conversion of charpoy GI N/N to Charpoy GI Ply Top (FD-220)

Repair of charpoy GI Pipe as under:- (a) Removing unservceable nylon newar from charpoy GI pipe, tightining of loose components (i.e. complete charpoy). (b) S&F plywood of size 1980 mm X 900 mm X 12 mm thick BWR grade ISI marked confirming to IS-303 fixed with 12 mm X 6mm thick teak wood beading (Half round) all around the plywood edges fixed with fevicol and headless nails, with mild steel galvanized iron nuts and bolts of suitable size and length. (c) S&F two stiffners made out of flat iron 40 X 5mm x 900 mm long (each) shall be fixed with GI nuts, bolts, washers of appropriate size as directed between the long rails, 14 Nos of round head top bolt 6 mm dia 75 mm long and nut with steel washers to be used for fixing of plywood top including drilling holes complete all as specified and directed. (Note:- All steel sections except GI articles shall be painted with two coats of black synthetic enamel paint over a coat of red oxide primer and exposed surfaces of teak wood beading shall be French polished as specified).

(a) S & F in repairs 32mm dia ISI medium grade of approved make, long rail for GI Charpoy pipe including removing unserviceable long rail, rest all as shown on drg and as directed by Engr-in-Charge.

(b) Making short rail for GI Charpoy obtained from item No. 137(a) above here-in-before cut in to length and threading including removing of existing unserviceable short rails all as specified and directed.

(c) Making leg for GI charpoy from short rail obtained from item No. 137(b) above here-in-before end threading other end provided with MNF clamp suitable for 19mm dia conduit pipe 3mm base plale welded at bottom and fixed in repairs as required as per drg.

Removing existing old unserviceable Check nut from charpoy GI pipe and supply & fix new Check nut to charpoy GI pipe complete all as specified and directed.

Removing existing old unserviceable elbow from charpoy GI pipe and supply & fix new GI elbow to charpoy GI pipe complete all as specified and directed.

M/S East India Traders

PRAVESH KUMAR

R K AGARWAL