Repairs and Renovation of D-Type quarters 8 Nos (i.e., D73 to D78, D83, and D84) in HSL Colony

Providing and fixing vitrified tiles (single charger) of size 600X600X 10mm with water absorption less than 0.08% and conforming to IS : 15622, of approved make like SOMANI / KAJARIA / RAK / JOHNSON, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) in flooring and 12 mm thick CM (1:3) in skirting, including grouting the joints with white cement and matching pigments etc. Quoted rate shall be including removal of old damaged tiles / existing flooring up to required thickness, preparation of the surface and the cost of Cement (PPC-Ramco, ACC, Ultratech, Nagarjuna & Jaypee) & all materials complete all as directed.

Providing and fixing 1st quality anti-skid floor tiles in toilets & wash rooms of 10mm thick (edge cut) conforming to IS : 15622, of approved make SOMANI / KAJARIA / RAK / JOHNSON in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including pointing the joints with white cement and matching pigments etc., Quoted rate shall be including removal of old damaged tiles / existing flooring up to required thickness, preparation of the surface and the cost of Cement (PPC-Ramco, ACC, Ultratech, Nagarjuna & Jaypee) & all materials complete all as directed.

Providing and fixing 1st quality, up to 10 mm thick (edge cut) Ceramic Glazed tiles in skirting & dados conforming to IS : 15622, of approved make SOMANI / KAJARIA / RAK / JOHNSON, in all colours and shades, laid on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade. Quoted rate shall be including removal of old damaged tiles / existing flooring up to required thickness, preparation of the surface and the cost of Cement (PPC-Ramco, ACC, Ultratech, Nagarjuna & Jaypee) & all materials complete all as directed.

Rearrangement of Mangalore tiles by removing old damaged tiles and arranging new tiles (tiles issued by HSL at free of cost). Contractor has to arrange the manpower to collect the materials from specified places. Quoted rate including the removal old damaged tiles, level the surface and providing issued tiles in roof without any undulations etc., complete

Repairs to old damaged wooden horizontal members in grid below the Mangalore tiles by removing the damaged wooden members and replacing with supplied wooden members (wooden members issued by HSL at free of cost, Contractor has to arrange the manpower to collect the materials from specified places) including cutting into required sizes and fixing on top of wall with necessary nails, screws etc., excluding the making of pockets on walls and filling with concrete etc., complete

Providing and lay water proofing treatment consisting of: (i) removing the old dagamed bituminous layer if any (ii) Application of Shalibond CS at 0.7Kg/Sq.M, cold bituminous adhesive for fixing waterproofing membrane (iii) Providing and laying STP (Shalimar) or Sika Atactic Ploypropylene Polyme (APP) modified layer prefabricated waterfproofing membrane having minimum thickness 1.50mm. Finishing the surface with trowel or otherwise to obtain a uniform surface. The minimum side lap and end lap shall be kept at 75mm and 100mm respectively (iv) Application of aluminum paint in two coats over the surface to protect from direct exposure of SUN etc., Complete all as directed.

Removing of damaged wooden partitions from quarters and handover to Colony Maintenance Dept. etc., complete

FALGY Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level in cement mortar (1:4) including cost of Cement (PPC-Ramco, ACC, Ultratech, Nagarjuna & Jaypee) and all materials & men etc., complete

Half brick masonry with common burnt clay F.P.S. (non modular) FALGY bricks of class designation 7.5 in superstructure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work including cost of Cement (PPC-Ramco, ACC, Ultratech, Nagarjuna & Jaypee) and all materials & men etc., complete

Providing 15 mm thick plaster with CM (1:4) to walls at all heights, lintel soffits, chajjas, projections, narrow bands, widths and where ever required etc., including cost of Cement (PPC-Ramco, ACC, Ultratech, Nagarjuna & Jaypee) and all materials, tools, plant and labour, scaffolding arrangements and curing all as per specifications and directions of the engineer.

Providing and laying reinforced cement concrete work in nominal mix of 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 20 mm nominal size), excluding the cost of centering, shuttering, finishing and reinforcement and including cost of Cement (PPC-Ramco, ACC, Ultratech, Nagarjuna & Jaypee) and all materials & men etc., complete

Supply and providing HYSD bar reinforcement of Fe-500 grade of approved make SAIL / RINL / TISCO including transportation, straightning, cutting, bending and binding with annealed binding wire of 18 gauge (1.22mm dia) complete all labour and material etc., complete all as directed

Providing water proof MS / Wooden centering and shuttering including strutting, propping for lintels and whereever specified etc., including removal of form work complete etc., complete

Providing sal / igisha wood work in frames of doors and other frames, wrought framed, wooden rafters and fixed in position etc., complete

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Providing and fixing 35 mm thick panelled doors of second class take wood with anodised aluminum butt hinges of required size with necessary screws etc., complete (over all area of door shutter is to be measured).

Providing and fixing anodized extruded aluminium sliding windows including frames of approved colour & make. Aluminium sections shall be powder coated with approved colour including aluminium frame conforming to IS:1948, IS:1949 fabricated from extruded sections of INDAL / JINDAL or approved equivalent make having minimum 2mm wall thickness for windows & ventilators as per IS:1285, IS:733 and electro color coating of 15 microns thickness. Glazing shall be frosted float glass of 5.5mm thickness of approved make SaintGobin / Modifloat including sanp fit type beading, concealed screws, fixtures, lokcing arrangement for windows, C.P.brass / staineless steel screws, providing and fixing hinges / pivots, and making provisions for fixing of fittings where ever required including cost of PVC / neoprene gasket fits all complete with necessary filling up of gaps at the junctions, at top, bottom and sides etc., complete. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required.

Taking out existing door shutters and cut into required height for laying tiles and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Removing and refixing of existing wooden shutters after removing old glass panes and replace with new frosted glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) with putty and nails wherever necessary and replace the butt hinges including racking out the old putty and handing over of useful glass panes etc., complete. (area of shutter is to be measured)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer and two coats of enamel paint all complete

Supply of 110 mm dia UPVC (SWR) Soil and waste pipes conforming to IS : 13592 Type B, jointing with seal ring conforming to IS : 5382, including fixing of clamps, bends, shoes (supreme/ prince make) complete

Supply of 75 mm dia UPVC (SWR) Soil and waste pipes conforming to IS : 13592 Type B, jointing with seal ring conforming to IS : 5382, including fixing of clamps, bends, shoes (supreme/ prince make) complete

Supply, Install & Commissioning of vertical type cylindrical HDPE 500 lits net capacity Water Tanks of Sintex or equivalent approved make including all connections and accessories like inlet, out let, wash out, over flow connections, ball float valves complete all as directed.

Providing and fixing 15 mm nominal dia Pipes CPVC pipes for concealed plumbing lines of approved make Supreme / Prince / Astral including necessary fittings like bends, elbows, unions & required gate valves etc. Quoted rate shall include cost of cutting chases and making good the same and testing of joints complete as per direction of Engineer in Charge.

Providing and fixing 25 mm nominal dia Pipes CPVC pipes for external plumbing lines of approved make Supreme / Prince / Astral including necessary fittings like bends, elbows, unions nd required gate valves etc. Quoted rate shall include cost of cutting chases and making good the same and testing of joints complete as per direction of Engineer in Charge.

Providing and fixing 50 mm nominal dia Pipes CPVC pipes for external plumbing lines of approved make Supreme / Prince / Astral including necessary fittings like bends, elbows, unions nd required gate valves etc. Quoted rate shall include cost of cutting chases and making good the same and testing of joints complete as per direction of Engineer in Charge.

Supply & provide 100 mm dia Stainless steel (floor trap) grating of approved quality etc., complete

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for black Granite kitchen platforms as per requirement, approved shade, colour and texture including Providing edge moulding and machine polishing to edge to give high gloss finish etc. laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels including cost of cement (PPC-Ramco, ACC, Ultratech, Nagarjuna & Jaypee) and all materials.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink of size 610X510 mm bowl depth 200mm as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required etc., complete (Nirali / Anjali / Parryware make)

Supply, fit and fix white glazed earthenware European type water closest of Parryware / Hindware / Jaquar make with 'P' or 'S' trap with or without vent hole, colour or black solid plastic seat and cover with low level cistern of 6 litres capacity of same make as specified including all fittings, materials, tools and labour etc., complete.

Supply & Fixing 15 mm dia bore Brass C.P bib cocks of standrad quality with 15mm dia bore of approved make confirming to IS:893 and Complete all as directed. (Jaquar/ parryware/Hindware/Plaza)

Supply & Fixing 15 mm dia bore Brass C.P angle cocks of standrad quality with 15mm dia bore and Complete all as directed. (Jaquar/ parryware/Hindware/Plaza)

Providing brass health faucet of make Jaquar / Parryware / Hindware make including all accessories etc., complete

Providing and fixing C.P Towel rail 600mm length of approved make Jaquar / Parryware / Hindware including all accessories etc., complete

Providing and fixing bright finished brass hard drawn hooks and eyes 250mm of standard quality etc., complete

Providing and fixing PTMT soap Dish Holder of approved make Jaquar / Parryware / HIndware equivalent having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms etc., complete

Supply and fixing of 25 mm thick 750 x 2000 mm size, PVC doors with frame & shutter for toilets (Sintex or equvilant make) including aluminium aldrop, towerbolt, handles and butt hinges etc., complete

Providing plain cement concrete 1:2:4 nominal mix using 20 mm graded crushed granite aggregate including mixing, depositing in position, tampering, finishing, curing including all materials & labbour in flooring and top of roof level for fixing of wooden members and levelling course etc., complete all as directed.

Construction of Random rubble masonry with hard stone in superstructure in CM (1:6) above plinth level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) cost of cement (PPC-Ramco, ACC, Ultratech, Nagarjuna & Jaypee) and all materials

Treatment of existing masonry and wood work by chemical emulsion @ one litre per hole at 300 mm interval and @ 0.5 litre per hole at 150 mm interval respectively including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration etc., complete

Supply & fixing netlon mosquito mesh removal type of velcro type to windows and where ever required including supply and fixing of wooden beeding of required size etc., complte

Earth work in excavation by mechanical means / manual means in all kind of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches, clear from the edge of excavation including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Demolishing brick work / RR work in cement mortar manually or by mechanical means including stacking of serviceable material and disposal of unserviceable material out side the HSL premises etc., complete all as directed.

Demolishing R.C.C. work manually / by mechanical means including stacking & handing over of useful materials like steel bars (after cutting & cleaning the surface) to Colony Maintenance Dept. and disposal of unserviceable material out side the HSL premises etc., complete all as directed.

Demolishing P.C.C. work manually / by mechanical means including stacking and disposal of unserviceable material out side the HSL premises etc., complete all as directed.

maple tree projects

JYOTHI ENGINEERING WORKS