COMPREHENSIVE BR REPAIRS TO JOINERY PLUMBING SANITARY FITTINGS FLOORING PAINTING AND MISC BR ITEMS INCLUDING INTERNAL EXTERNAL PAINTING TO OTM ACCN OF 23 GRENADIERS 1872 RKT REGT 175 WKSP AND GOLDEN LION CANTEEN AT AGE BR II SOUTH UNDER GE SOUTH

Amount

Material and labour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.18 sqm but not exceeding 0.38 sqm, 7 to 8 mm thick as in floor, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or layer in cement mortar (1:4) including dismantling of existing tiles etc including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.18 sqm but not exceeding 0.38 sqm, 7 to 8 mm thick as in vertical surfaces such as dado, skirting, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 10 mm thick rendering in cement mortar (1:3) including dismantling of existing tiles etc including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, 7 to 8 mm thick as in floor, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or layer in cement mortar (1:4) including dismantling of existing tiles etc including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, 7 to 8 mm thick as in vertical surfaces such as dado, skirting, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 10 mm thick rendering in cement mortar (1:3) including dismantling of existing tiles etc including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material & labour for premium quality coloured glazed ceramic tiles (300x 450x 7mm thick) in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement plaster 1:3 including dismantling of old floor or wall tiling including cement mortar bedding and removing the rubbish outside the defence land complete all as specified and as directed.

Material and labour for premium quality, dark shade virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed as in neat, neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or layer in cement mortar (1:4) including dismantling of existing tiles etc including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for premium quality, dark shade virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in vertical surfaces such as dado, skirting, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 10 mm thick rendering in cement mortar (1:3) including dismantling of existing tiles etc including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material & labour for 18-20 mm thick granite stone slab of any type with table rubbed and polished as in slab/ platforms and like set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab including dismantling of existing stone/tiles etc including cement mortar bedding and rubbish off the premises complete all as specified and directed.

Material and labour for machine cut kota stone slab 20-25 mm thick ( size of each stone not less than 55cm x 55cm), laid in flooring, over and including cement screed bed 20mm thick in cement mortar (1:4) base set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) including dismantling of existing stone/tiles etc including cement mortar bedding and rubbish off the premises complete all as specified and directed.

Material and labour for machine cut kota stone slab 18-20 mm thick ( size of each stone not less than 55cm x 55cm), laid on vertical surfaces of skirting/dado, over and including cement screed bed 15 mm thick in cement mortar (1:3) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) including dismantling of existing stone slab/tiles etc including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for 75mm thick PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in sub base of hard standing, flooring and paving/path etc, finishing even and smooth without using extra cement, including demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness below or above ground level complete all as specified.

Material and labour for brick work with sub class ‘B’ bricks, straight or curved on plain exceeding 6 metre mean radius in cement mortar (1:6) including demolition of brick work built in cement mortar including demolition of old brick/stone masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed.

Taking down cement plaster of any description and in any position including raking out joints, hacking for key, scrubbing down with water etc of any thickness complete all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar (1:4) on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar (1:6) on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 10mm thick cement plaster in CM (1:3) to ceiling surface and finished the surface even and smooth without using extra cement with and including preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

Material and labour for preparation of exposed brick wall surface by cleaning the surface wire brush to remove all dirt/loose materials from the bricks and from the joints between the bricks. Prepared surface should be then washed with diluted HCL acid (dilution ratio of 1:50) for three times in a day for two days. After acid wash surface should be allowed to be air dried for one day. NOTE : - Further treatment over the surface so achieved will be carried out only after approved of the same by GE.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with hand roller, over a coat of alkaline resistant primer over a coat of wall care putty not less than 1mm thick as per manufacturer's instruction complete all as specified and directed.

Material and labour for preparation of newly plastered surface and applying two coats of cement base paint over a coat of alkaline resistant primer complete all as specified and directed

Material and labour for preparation of new plastered surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of plastic emulsion paint over a coat of primer on wall etc complete all as specified and directed.

Supply and fixing of GI tubing, ISI Marked, 15mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required, including taking down of old tubing as existing at site and removal, complete all as specified and as directed.

Supply and fixing of GI tubing, ISI Marked, 20mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required, including taking down of old tubing as existing at site and removal, complete all as specified and as directed.

Supply and fixing of water storage tank of 500 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore including dismantling of old tanks of of any description complete all as specified and directed. Note:- Tank shall be white and make of tank shall be engraved on the tank.

Supply and fixing of water storage tank of 1000 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore including dismantling of old tanks of of any description complete all as specified and directed. Note:- Tank shall be white and make of tank shall be engraved on the tank.

Supply and fixing in repair of PVC (SWR) floor trap 75mm dia plain with PVC grating including jointing with solvent cement complete all as specified

Supply & fixing (in repair) of 15mm fancy type, chromium plated, angle cock, cast copper alloy, screwed down high pressure with crutch or butterfly handle, heavy with adjustable wall flange, complete all as specified and directed.

Supply & fixing (in repair) of stop cock, fancy type, chromium plated, long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends suitable for 15mm bore pipe, complete all as specified and directed. (Note : Weight of stop cock shall not be less than 0.575 Kg)

Supply & fixing (in repair) of CP bib tap screwed down high pressure, long body, cast copper alloy, chromium plated with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified. (Note : Weight of bib tap shall not be less than 0.575 Kg)

Supply and fixing (in repair) of vitreous china squatting pan of orrisa pattern size 580 x 440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and foot rests of any pattern complete including provision of lime concrete bed and connection to flush pipe excluding flushing cistern, flush pipe and bracket and making good the disturbed area complete all as specified and directed.

Supply and fixing (in repairs), vitreous chainaware Dome (S-30) concealed floor trap mounted, starwhite colour, EWC pedestal pattern alongwith and including premoulded vitreous china ware cistern, seat cover complete all as specified and directed.

Supply & fixing (in repair) of vitreous china wash hand basin white flat back of size 550x440mm including CI brackets and 15mm chromium plated pillar tapc ast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks, PVC connection 450 mm long having PTMT nuts and chromium plated waste coupling and making good to disturbed portion including 32 mm dia PVC waste pipe etc., complete all as specified and directed.

Supply and fixing in repair of vitreous china, white coloured, counter top wash hand basin, oval type of size 17.50 x 12 x 5.5 inch including cutting for and pinning in, and chromium plated waste coupling and making good to disturbed portion including 32 mm dia PVC waste pipe etc, complete all as specified and directed.

Supply & fixing (in repair) of 10 litre capacity flush polypropylene cistern, ISI marked, white at low level complete with PVC bend/flush pipe and making all connection including taking down existing high/low level cistern with all connections and making good the disturbed surfaces in cement mortar (1:3) to match with the existing surface, complete all as specified and directed.

Supply & fixing (in repair) of WHB mixer (hot & cold), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, fancy type screwed for iron pipe and fixed bore of pipe 15 mm, complete all as specified and directed.

Supply & fixing (in repair) of fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

Supply and fixing in repairs PVC coloured bath cabinet overall size 16"x16" decorative design with looking mirror, nepkin rail complete all as specified and as directed.

Supply and fixing (in repair) of chromium plated towel rail 600mm long complete all as specified and directed

Supply and fixing (in repair) of chromium plated soap dish with fitting complete all as specified and directed.

Supply and fixing (in repair) of fancy type, shower rose 125mm size , brass Chromium plated, revolving type, fixed to existing steel pipe or union 15mm bore complete all as specified and as directed.

Supply and fixing (in repair) of PVC waste pipe 32mm bore suitable for WHB/ Sink etc complete all as specified and as directed.

Supply and fixing (in repair) of PVC connections 45/60cm long and 15mm dia with PTMT nuts and PVC washers on both ends, complete all as specified and as directed.

Supply & fixing (in repair) of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12mm wide and chromium plated brakects guard and railing 60cm long complete all as specified and directed.

Supply & fixing (in repair) of PVC seat cover with hinges for EWC complete all as specified and directed.

Supply and fixing (in repair) of Jet spray with PVC pipe & nozzle of superior quality complete all as specified and as directed.

Supply & fixing of PVC (SWR) 110 mm pipe single socket in any length with rubber ring joints fixed to wall or in floors including dismantling of rain water pipes of any description any length including bends etc complete all as specified and as directed.

Supply & fixing of PVC (SWR) 75 mm pipe single socket in any length with rubber ring joints fixed to wall or in floors including dismantling of rain water pipes of any description any length including bends etc complete all as specified and as directed.

Supply & fixing PVC (SWR) bends 110 mm bore complete all as specified and as directed.

Mterial and labour for PCC 1:4:8 type D-2 (using 40 mm grade stone aggregate) as in floor filling & mass concrete for sunken floor in WC/Bath etc including demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Material and labour for water proofing treatment of sunken floor of WCs, bathroom, etc by applying of the following specifications and sequence complete as specified and directed:- (i) Cleaning of sunken floor surface with mechanical means i.e. wire brush/air blower etc. and remove all loose /unsound material, dirt, dust etc. (ii) Applying cement slurry mixed with acrylic based polymer moodified cementitous composite compound coating. (iii) First layer of cement slurry @ 0.488Kg/sqm mixed with acrylic based polymer moodified cementitous composite compound @0.253 Kg/ Sqm and allow it to air dry for 04 hours. (iv) Second layer of cement slurry @ 0.242 Kg/sqm mixed with acrylic based polymer moodified cementitous composite compound @0.126 Kg/ Sqm and allow it to air dry for 04 hours followed with water curing for 48 hours. (v) 200 micron thick polythene film shall be pasted with help of adhesives over treatment. Note- Joints of WC/ Trap/ Soil waste shall be properly sealed with sealing compound. Testing of all traps and joint and sunken slab shall be done as per IS-1742 before filling and tiling work.

Supply and fixing of 25mm thick insulated PVC Wall Lining consisting of PVC insulated panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing inclusive of solvent cement and fixing at site over on PVC fillets frame of (600x 600 mm box ) including 5 mm thick PVC sheet fillets of width 35 mm for wall paneling inclusive of fixing on wall to make PVC frame as per specification and directed .

Taking down chowkats or frames with shutter, area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.

Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre but not exceeding 4 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.

Taking down shutter of any descritption exc 1.00 sqm each but not exc 2.00 sqm each including removal from site complete all as specified and directed.

Supply and fixing factory made PVC hollow door frame of size 50mm x 47mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet cut at corner and jointed with 02 Nos, 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos of screws to be provided for each vertical numbers & minimum 02 Nos for horizontal member) complete all as specified and directed.

Supply and fixing Factory made solid PVC moulded door shutter, 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face including fixing in frame at site with 03 Nos SS hinges, 02 Nos aluminium tower bolt 150 mm, 02 Nos aluminium handle 150 mm for each shutter all as per specification & drawing complete all as specified and directed.

Supply and fixing of pressed steel frames for doors of size 125 x 60mm, 1mm thick, with one or more rebates including, hold fasts of 25mm x 4mm FI, 25cm long, 6 Nos in each chowkhat, necessary lugs, 3 Nos 100 mm MS butt hinges medium weight, cold rolled, welded for each shutters of frame, lock strike plate, including sanding, tarring backs of chowkhats, PCC 1:3:6 type C-0 filling in frame and for holdfast, 2 Nos 12 mm dia MS tie bars at the bottom of frame and one shop coat of red oxide primer etc complete all as specified and as directed.

Supply and fixing of factory made 35 mm thick, second class hard wood rail and style, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commrcial veneering on both faces ace, size of rails and stiles as per IS 1003 (part-I) kiln seasoned and chemical pressure treated complete all as specified and directed.

Supply and fixing of factory made flush shutters 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, ISI marked complete all as specified and as directed. Note:- Manufacturers Test certificate to be submitted before incorporation.

Supply and fixing of IInd class hard wood factory made 35mm thick glazed skelton door shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed.

Material and labour for 2nd class, hard wood, plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed

Supply and fixing of steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skelton shutter 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219(c) sheet 1/3 to 3/3 and TD-220(c) sheet 1/3 to 3/3 as applicable including PCC(C-O ,1:3:6 using 12.5 graded agg) bed blocks for hold fasts and one shop coat of red oxide primer etc complete all as specified and directed. Note: (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery , grills 10mm square bars. (iii) Only Glazing, wire mesh & painting grill shall be measured & paid for separately)

Supply and fixing 150mm long extruded aluminium alloy handles, fabricated type, anodised complete as specified and directed .

Supply and fixing 200mm long aluminium anodised barrel tower bolts of extruded section complete as specified and directed.

Supply and fixing 300 mm aluminum anodised sliding door bolt, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified and as directed.

Supply and fixing mild steel helical door spring 150 mm long fixed with screws to wooden chowkhats or welding to steel chowkhats, complete all as specified and directed.

Supply and fixing of sheet glass 3mm thick, ordinary quality , in square not exceeding 0.5 Square metre each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters, complete all as specified and as directed.

Supply and fixing of galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staple complete all as specified and as directed.

Supply and fixed (in repair) of galvanized mild steel wire cloth with 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with finned tacks or galvanized wire staplecomplete all as specified and as directed.

Supply and fixed (in repair) of sheet glass 3mm thick, ordinary quality and glazing with oil putty, in square n.exc 0.5 Sqm each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters, complete all as specified and as directed.

Material and labour for PCC 1:2:4 type B-1, (using 20mm graded mechanically crushed stone aggregate) as in bed blocks for hold fasts etc, complete all as specified.

Supply and fixing (in repair) of 150mm long floor door stopper of aluminium alloy body & tongue anodized with hard drawn steel spring complete all as specified and as directed..

Supply and fixing (in repair) of hydraulically regulated door closer, aluminium (die cast ) body, design No.1 universal type suitable for shutters upto 700 width and of weight more than 35Kg complete all as specified and directed.

Supply and fixing (in repair) of mild steel pressed handle, 150mm long, oval type, stove enameled black, complete all as specified and directed.

Supply and fixing (in repair) of mild steel barrel tower bolt stove enamelled black with bright bolt 150mm long complete all as specified and directed.

Supply and fixing of butt hinges, medium weight, cold rolled, mild steel, ISI marked 100 mm size complete all as specified and directed.

Supply and fixing (in repair) of 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupboard shelves, shutter complete all as specified and as directed.

Supply and fixing (in repair) of 18/19 mm thick particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work as in cupboard shelves etc complete all as specified and as directed.

Supply and fixing (in repair) of continuous (piano) hinge, mild steel bright finish or electro galvanised, width of flap when open 30 mm complete all as specified and as directed.

Supply and fixing (in repair) CP Hand shower (Health faucet) including 1.50 meter long flexible tube. complete all as specified and as directed

Material and labour for preparing new or previously untreated wood or wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for complete removal of existing treatment on surface of walls by using appropriate technique as approved by Engineer-in-Charge for complete removal of all layers of treatment and reaching upto old plastered surface and applying a coat of wall care putty not less than 1mm thick as per manufacture instructions and applying two coats of oil emulsion paint over a coat of alkaline resistant primer complete all as specified and directed.

Material and labour for complete removal of existing treatment on surface of ceilings and preparing of new plastered or un-decorated surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

Material and labour for preparation of old wood and wooden based surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel complete all as specified and directed.

Material and labour for preparation of old wood and wooden based surfaces of any description not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel complete all as specified and directed.

Material and labour for preparation of old paint steel and iron surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old plastered or unplastered surfaces of walls by washing rubbing and applying one coat of cement base paint complete all as specified and as directed.

Material and labour for preparing surfaces old plastered surfaces of walls and applying one coat of white washing complete as all specified and directed.

Material and labour for preparing surfaces old plastered surfaces of ceiling and applying one coat of white washing complete as all specified and directed.

Material and labour for preparation of old plastered or unplastered surfaces of walls by washing rubbing and applying one coat of oil bound distemper complete all as specified and as directed.

Material and labour for preparation of old plastered or unplastered surfaces of walls by washing rubbing and applying two coats of oil bound distemper complete all as specified and as directed.

Material and labour for preparation of old painted plastered surfaces of any description over 10 cm width or girth and applying one coat of plastic emulsion paint on wall complete all as specified and directed.

Material and labour for preparation of old painted plastered surfaces of any description over 10 cm width or girth and applying one coat of plastic emulsion paint on ceiling complete all as specified and directed.

Material and labour for preparation of old painted plastered surfaces of walls, chajjas, balcony, fascia etc and applying one coat of weather exterior emulsion paint complete all as specified and directed..

Supply and fixing in repair of aluminium pre coated of choice colour designed type 25 mm tubular rod in curtain rod, 1.6mm fancy type including PVC golden colour brakets, latto and wall to wall socket etc., complete all as specified and directed.

Supply and fixing of steel tube 50 mm bore, medium grade galvanized, ISI marked, fixed to walls as in additional support of ceiling, etc including cutting & chasing in wall and making good with PCC to old existing surface complete all as specified and directed.

Supply and fixing in repair of double action floor spring hydraucally regulated made of 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, govering pivot made of brass, other parts made of mild steel heavy duty, suitable for aluminium doors complete all as specified and directed.

Supply and fixing of anodised aluminium frame for doors, windows, ventilators (Powder coated (minimum thickness of powder coating 50 micron) in any colour as directed) with sliding, openable of fixed type shutter or any pattern as directed including jointed together including rubber beading and all necessary fittings etc complete all as specified and directed. NOTE : - Only aluminium section measured and paid under this item. (ii) Rate quoted by the contractor shall demmed to inclusive for necessary fittings and fixture such has roller, handle locks etc. (iii) Glass, XPM wire mesh shall be measured and paid separately

Supply and fixing of anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. including taking down existing shutter/window including frame complete all as specified and directed.

Supply and fixing of 5.5 mm thick tinted glass in square exceeding 0.5 sqm in each pane with heat reflecting properties, black glass file of 50 micron, fixed to aluminium frame with glazing clips, etc., complete all as specified and directed.

Supply and fixing of wire netting of galvanised steel wire 1.40mm dia fixed size of mesh 12mm fixed with tinned tackes or wire staple complete all as specified and directed.

Supply and fixing in repair of vitreous china urinal partition white of size 310 x 700 mm slab above 40cm above floor line complete all as specified and directed.

Dismantling timber scantling 40 Sq. cm and over in section, in any position of unframed/ framed work complete all as specified and as directed.

Supply and fixing of semi perforated false ceiling 12 mm thick with micro tegular edged at all height with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and pattern having moisutre content less than 2%, humidity resistance of 99%, NRC 0.60 to 0.85 as per IS 8225-1987, non combustible as per BS 475 (Part-4) 1970 and light code description unit code No 429 Sub Head 26. New Technologies and materials reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T -grid of hot dipped galvanised iron section of 0.33 mm thick ( galvanised @ 120 gms/ sqm including both sides) comprising of main T- runners of size 15x 32mm of length 3000mm, cross T of size 15 x32 mm of length 1200mm and secondary intermediate cross T of size 15 x 32 mm of length 600 mm to from grid module of size 600 x 600 mm, suspended form ceiliing using galvanised mild steel items (Galvanised @ 80 gm/sqm) i.e. 50 mm long, 8mm outer diameter M-6 dash fastners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85 x 25 x 2mm. galvanised iron perimeter wall angle of size 24 x 24 x 0.4 mm of length 3000 mm to be fixed on perimeter wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall SS screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-in-Charge including dismantling existing asbestos sheet false ceiling textile coverings including frames (if any) and cover fillets complete all as specified and directed.

Cleaning and removing all scale and dirt, etc from existing water storage tanks of capacity exceeding 250 litres and not exceeding 500 litres by emptying, drying and cleaning the tank by scrubbing the dust with wire brush from tank including cleaning from mouths of circulating pipes, to entire satisfaction of Engr-in–chargeof cleaning , including writing date of cleaning with oil paint of of visible colour in font size not less than 100 mm, complete all as specified and directed (The rates includes for disconnecting of existing water tank, lowering if required and hoisting, reconnecting and refixing in same position after cleaning ) NOTE: - (i) The whole process of disconnecting, reconnecting and refixing in same position after cleaning shall be done on the same day, if failing so, Rs. 100/- shall be deducted for each tank per day from the contractor due. (ii) A separate register to be maintained by contractor for cleaning and occupant signature with date to be obtained in it.

Cleaning and removing all scale and dirt, etc from existing water storage tanks of capacity exceeding 500 litres and not exceeding 1000 litres by emptying, drying and cleaning the tank by scrubbing the dust with wire brush from tank including cleaning from mouths of circulating pipes, to entire satisfaction of Engr-in–charge of cleaning, including writing date of cleaning with oil paint of of visible colour in font size not less than 100 mm, complete all as specified and directed (The rates includes for disconnecting of existing water tank, lowering if required and hoisting, reconnecting and refixing in same position after cleaning ) NOTE: - (i) The whole process of disconnecting, reconnecting and refixing in same position after cleaning shall be done on the same day, if failing so, Rs. 100/- shall be deducted for each tank per day from the contractor due. (ii) A separate register to be maintained by contractor for cleaning and occupant signature with date to be obtained in it.

NOTE:- Amount of credit of Rs. 54,315.00 for retrieved materials is mentioned in Schedule of Credit Page No 19(R) of tender documents in pdf form which will be deducted offline while acceptance of tender.

Anil jindal and sons

S M BUILDERS

Shiv Construction Co.

PARVEEN KUMAR

Ashwani Kumar

power house batteries

M/S M S BUILDER AND CONTRACTORS

M/S Mahal Enterprises