Proposed Extension of the existing Municipality Building left side (B Block) for the Thalassery Municipality-Providing Electrification, Diesel Generator Set AND Lightening

Amount

Electrification, Diesel Generator Set. Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FR PVC insulated stranded single core copper conductor cable 650V grade, including providing Switch Board main and continuous earthing with No. 14 SWG copper, required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single Control light point with 6A, plate ceiling rose - Short point.

Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FR PVC insulated stranded single core copper conductor cable 650V grade, including providing Switch Board main and continuous earthing with No. 14 SWG copper, required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Twin Control light point with 6A, plate ceiling rose - Short point.

Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator.

Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Call bell point with 6 A bell push at one end and 6 A, 3 plate ceiling rose at other end - Short point

Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points.

Independent plug

supply,Conveyance, installation, testing and commissioning of ornamental wall light fittings robust &reliable LED Bulk head with IP 65 protection and IK 08 impact resistance(Philips make Model WT140W LED 7S CWPSU S1C-9405)or any other equivalent make directly on wall including giving connections with required length of 16/0.20mm 3 core round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, making good the damages, colour washing etc as required.

supply,Conveyance, installation, testing and commissioning of recess mounted 2" x 2" LED Panel light fittings 30 Watts(Philips make Model RC 380 B LED 30S 6500G4 L60 W 60 PSU OD OC)or any other equivalent make on ceiling including giving connections with required length of 16/0.20mm 3 core round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, making good the damages, colour washing etc as required.

Supply,Conveyance and fixing of recess mounting 10/15 Watts down light fittings(DN295BLED 10S-6500PSU WH Philips make or equlant make) complete with all accessories in the existing opening of false ceiling, giving connections with the existing wire etc., as required.

Supply and Installation of post top lantern(Gate light) suitable for providing 9-18W LED bulb with cast aluminium housing and giving connection.(K lite ID 4913 Light house Prism Midi/equivalent)

Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer

Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.40 mm dia with clamps made from 20 x 3 mm MS flat

Supply and installation of suitable size rod type fan clamp as per IS 732 as required.

Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extendedoriginal wiring etc. as required.1200mm sweep -5star rated ceiling fan complete with 300mm down rod ,canopies, shackeles and blades and resistance type regulator working on 230V/240V single phase A/C

Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required

Supply,Conveyance, installation , testing and commissioning of exhaust fans of 200 mm sweep Light Duty Exhaust fan in plastic body with self opening lowers working on 230v single phase A/C in the existing opening, fixing necessary anchor bolts / bolt and nuts etc., as required including giving connections with the supplied wire along with the exhaust fan

Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required.Musical bell with bird sound

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.2 Module (75mmX75mm)(RJ 45,RJ11,AC socket & switch,gate light)

3 module metal box in recess(Power plug & Printer point,)

4 module metal box in recess(UPS Charging socket )

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm) (For set of plug for computers)

Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (Group B)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch (set of plug and street light,gate light)

16 A SP 1 way switch with indicator

6A 3 pin shuttered socket

6 / 16 A combined socket

Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant 20/32A DP switch with indicator

Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required(RoHS compliant) 25A 3 pin shuttered socket.

RJ 11 Telephone Jack with shutter

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden blockincluding connection etc as required

Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.100 x 50 mm CMS with base and lid

.External angle 90 degree

Internal Angle 90°

Flat Angle 90°

End Cap

Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.1 to 3 module mounting box

Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.6/8 module mounting box

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.6 Module

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

25 mm dia light gauge

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.50 sq mm 4 run (for set of plug circuit )

1.50 sq mm 5 run (for set of plug circuit )

1.50 sq mm 7 run (for set of plug circuit )

2.50 sq mm 3 run ( For power plug)

2.50 sq mm 5 run ( For power plug)

4.00 sq mm 2 run ( For AC,UPS DB)

4.00 sq mm 4 run ( For DB)

Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.4 Pair

S & F Enclosures for MCB DB

Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required

8 way single phase double cover (IP 42/43)

12 way single phase double cover (IP 42/43) (For UPS DB)

6 way (8+12) - three phase double cover (IP 42/43)

Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall ,making good the damages, colour washing etc. as required 6 way (8+18) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43)

Supply and installation of the following accessories suitable for 50 Hz , AC supply conforming to IS 8828-1995/ IEC 60898 of the following current ratings in the existing enclosure and giving connections as required

40 A double pole mini break isolator

40 A four pole mini break isolator

63 A four pole mini break isolator

25 A, 2 pole, 30 mA RCCB

40 A, 4 pole, 30 mA RCCB

63 A, 4 pole, 30 mA RCCB

6 A to 32 A, 10 kA, SP MCB (C curve)

40 A, 10 kA, TP MCB (C curve)

Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 16 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

2 core 6 sq mm with factory made clamp(To Gate light ,Fire pump house DB)

4 core 10 sq mm with factory made clamp(To Fire pump(10 HP)

4 core 16 sq mm with factory made clamp(To Lift )

3.5 core 25sq mm with factory made clamp(To Old block,LH GF,LH FF,- MCCBDB)

3.5core50 sq mm with factory made clamp( SSB to LH 2nd floor )

3.5core70 sq mm with factory made clamp(MSB to Fire Panel )

3.5core120 sq mm with factory made clamp ( MSB to SSB) (Metre to MSB- 2 Run)

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 6 sq mm

Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc.with charcoal/ coke and salt as required.

Supply and providing test joint for the earthing system using 2 Nos of the following sizes of strips including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required.

2 x 25 x 3 mm GI strip

Supply and providing earth lead from the test joint to the earth electrode using 25 x 3 mm GI strips including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate test joint etc as required.

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required.

4.75 mm copper conductor (6 SWG)

3.15 mm copper conductor (10 SWG)

2.65 mm copper conductor (12SWG)

2.00 mm copper conductor (14 SWG)

supply of superior quality copper earth socket for the following sizes of earth conductor including crimping etc. as required.

4.75 mm (6 SWG)

3.15 mm (10 SWG)

2.65 mm (12 SWG)

2.00 mm (14 SWG)

Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required

12 x 3 mm brass bolt & nut

25 x 3mm brass bolt & nut

MSB,SSB,Lift panel

Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br>Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as requiredCRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

Supply and fixing the following types of beeding along the periphery of doors/ other detachable compartments to make the panel assembly dust & vermin proof including sticking with glue

Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber,suitable size nut & bolt, providng heat shrink sleeves etc. as required

Supply and providing copper earth bus in the panel board

Supply, conveyance and fixing the following types & current rated control gears & switchgearsconforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 25/35 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL(2 Nos at Main Panel,5 Nos at SSB LH)

Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.160A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.320A/400A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

MCCB AccessoriesSupply and fixing rotary handle, External type (including BUC handle with door interlock ) in the existing MCCB of rating up to 320/250 A

Spreader/ terminal adapter kit Extended terminal for 4 pole MCCB of rating up to 160 A (8 Pcs)

Three phase multifunction meters to read V, A and F, accuracy class 1

MCCB AccessoriesSupply and fixing one number earth fault Relay up to 125A to 200A with CBCT.

MCCB AccessoriesSupply and fixing shunt release for all voltage range up to 630A

200/ 5 A, 10 VA, resin cast metering CT of accuracy class 1.

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.320 Amp TP&N

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.125 Amp TP & N

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel boardwith ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 Amp TP & N

Supply and Providing LED indicators for all voltage ranges - Red, Green, Black, Yellow or Orange Colour

Enameled Danger Notice Board of size 200 x 150 mm. with inscriptions ( both in English and Malayalam) and conventional Skull and Bone in Red colour.

2 -80A, DIN type fuse link of size 000

Fabrication, supply & installation of dust and vermin proof, wall mounting, thermoplastic meter box of folowing size suitable for fixing KSEB meter,fuse units, CT etc, hinged door construction for the front side with compartments if necessary, providing vision panel for the meter compartment, knock out for cable entry and exit.

Supply and fixing the following accessories in the existing meter board and giving connections etc.

250A fuse holder for BS type offset tag fuses.

Supply and Providing 200 A, 2 Way neutral links mounted on DMC/SMC base

Supply and providing 2.5 mm thick synthetic PVC fire retardent insulating sheet to withstand 15 KV dielectric strength conforming to IS 15652.

Painting letters or figures of the following sizes with enamel paint as identification mark to SB, DB, panel board etc as required

2.50 cm, 4 cm or 5 cm height

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.300 mm width X 50 mm depth X 1.6 mm thickness

NET WORK

Supply and providing 1M long patch cord

Supply and providing 2 M long patch cord

Supply and providing 24 port ethernet switch (D-LINK/Krone/Cisco or equivalent make). 10/100/1000

Supply and providing D-Link Cat6 UTP 24 Port Loaded Patch Panel/ Cat6 24 Port Panel (/Krone/Cisco).

Supply and providing wall mounting rack consisting of IO/BOX (UNICORN, Plantex cabinet suitable for 48 port (or 2x24 port) or equivalent make.

Part -II-Diesel Generator Set

Supply, Loading, Conveyance, unloading, and errection of 100 KVA DG Set with Acoustic enclosure as per CPCB norms and as detailed below

1. Engine

a. Make of engine - Kirloskar, Mahindra, Ashok lyleand, Cumins

b. Type of Engine - Diesel Engine.

c. No of Cylinders - As per manufactures standars.

d. Method of cooling - Water cooled with radiator.

e. Aspiration - Naturally Aspirated.

f. Design - Suitable for generating set operation.

g. Output - Suitable for generating set operation.

2. Standard accessories with Diesel Engine

a. Fly wheel.

b. Close Coupled.

c. Air cleaner.

d. Raditor with fan provided with fan guard.

e. Fuel Pump.

f. Mechanical /Electronic governor.

g. Fuel filter.

h. Lubricating oil filter.

i. Residential type exhaust silencer.

j. Battery Charger / Generator.

3. Engine Instument Panel with the following items.

a. Starting switch with key or button and Remote control

b. Lubricating oil pressure gauge.

c. Water temperature gauge.

d. RPM Indicator with hour meter.

e. Battery charging ammeter.

4. Saftey Controls for Engine

a. Battery control (trip) for low ludricating oil pressure.

a. Battery control (trip) for high water temperature.

5. Brushless alternator

a. Make - Kirloskar/ KEL/Stamford/Crompton/Integrated electric Ltd

b. Type - Self exited and self regulated

c. Capacity - 100 KVA / 80 KW @ 0.8PF

d. System of Voltage - 3Phase, 415V, 4Wire system.

f. Speed - 1500 rpm.

g. Frequecncy - 50Hz.

h. Insulation - Class F/H

The alternator should confirm to IS 4722/IS13365. Operation and service manual shall be provided

6. Fuel Tank

Suitable size fitted (built in type) inside the acoustic enclosure

7. Battery

Suitable size fully charged battery with leads and terminals of appropriate AH capacity as per Manufactures required including battery charger.

8. Standard control panel

a.160 A 4 Pole MCCB Set at 140A

b. 1No multifunction meter suitable for display of current in 3Phases, voltage in 3Phases, frequency, power factor, KVA, KVAh, KVAr, KVArh, KW etc.

c. 1 No separate KWH meter

d. Necessary measuring CTs of appropriate ratio and burdon for the required meter.

d. Instrument fuse/MCB - 2set

f. Metallic DNB - 1No

g. Solid state phase indication lamp for supply ON/OF with Fuse / MCB protection.

.AMF Panel-Totally enclosed sheet metal control panel suitable for the above alternator with suitable rated connection

Supply of HSD for test run

Charges for conducting load test

Excavation for cable trenches of depth upto 1.2 m in soft soil including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres.

Cement concrete 1:2:4 using 20mm (nominal size) broken stone for reinforced concrete work.

Providing 15 mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand) at all levels

Colour washing, two coats

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 120 sq mm

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required 3.5 core 120 sq mm

Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation 90/75 mm or nearest size

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 120 sq. mm (45mm)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

Supply and drawing 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

1.50 sq mm 10 run

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc.with charcoal/ coke and salt as required.

Supply and providing test joint for the earthing system using 2 Nos of the following sizes of strips including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required.

2 x 25 x 3 mm GI strip

Supply and providing earth lead from the test joint to the earth electrode using 25 x 3 mm GI strips including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate test joint etc as required.

Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)20 x 3 mm copper strip

Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required

12 x 3 mm brass bolt & nut

25 x 3mm brass bolt & nut

Supply and drawing 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

1.50 sq mm 3 run (for alarm)

Supply of superior quality copper bare ring terminal and making core termination of cables of the following sizes including crimping etc. as required.

S & F switch disconnector fuse unit complete with handle assembly, door inter lock and padlocking arrangement of the following ratings:

125 A, AC 23 A, TPN SDF for DIN fuse

125A-200A HRC fuse link

S & F Frame-work for fixing SDU/ SDF/ COS

Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

Supply and installation of ABC type fire extinguisher of 4 kg. Capacity complete with initial charges and installation brackets.Supply and installation, testing and commissioning of DCP type fire extinguisher with 5 kg. Capacity complete with installation brackets with ISI mark IS:15222

Supply and providing 9 Litre capacity GI Fire Bucket painted in post office red with primer coat of red oxide and written with white paint 'FIRE' mounted on MS angle frame work/ wall bracket filled with fine sand, painting the bracket/ floor stand including making good the damages, colour washing etc. as required.

Supply and providing 2 mm thick & 1 m wide electrical grade chequered type insulation mat to withstand 3.3 KV dielectric strength conforming to IS 15652/06

Charges towards the preparation of necessary plan, scheme and other related papers for submission to KSELB & KSEB

Fee to be paid to KSELB towards scrutiny, meter testing & inspection (actual amount will be reimbursed on production of original documents)

Providing Lightning Protection.

Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 6 mm aluminium strip.

Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).25 x 6 mm aluminium strip

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc.with charcoal/ coke and salt as required.

Supply and providing test joint for the earthing system using 2 Nos of the following sizes of strips including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required.

2 x 25 x 3 mm GI strip(2 Nos for Test joint on wall for testong the earth in each earth)

Supply and providing earth lead from the test joint to the earth electrode using 25 x 3 mm GI strips including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate test joint etc as required.(10Mts for Earth pit to Test Joint at Wall)

Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required

25 x 6 mm brass bolt & nut

city electricals

SABI ENGINEERING COMPANY