Renovation of various Panel boards inside the residential campus of NITC

Amount

MCCB, MCB & DB'S

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MOB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MOB TPDB is normally used where 3 phase outlets are required.)

4 way (8 + 12), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MOB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, 415 V, 'C' curve miniature circuit breaker suitable for inductive load of Four Pole in the existing MCB DB, complete with connections, testing and commissioning etc. as required.

MV CABLE JOINTING & END TERMINATION

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

4 X 10 sq. mm (25mm)

4 X 16 sq. mm (28mm)

4 X 25 sq. mm (28mm)

4 X 35 sq. mm (32mm)

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

4 X 16 sq. mm

4 X 25 sq. mm

4 X 35 sq. mm

LT CABLE

Supplying of following size Aluminium conductor XLPE insulated PVC sheathed power cable of 1.1 kV grade etc. as required.

4C x 10 Sq.mm

4C x 16 Sq.mm

4C x 25 Sq.mm

4C X 35 Sq.mm

PANEL BOARD

Charges for cleaning and spray painting the existing Panel board of following size or nearest size with two coats of suitable colour (Grey) paint, over a coat of primer in installed position and marking the identification of switches with white paint etc, as required ( Site visit recommended).

Fabrication & fixing of panel board Sheet made from 14 gauge thick galvano sheet, powder coated in suitable colour over a coat of primer, providing rubber beadings and suitable size hinches, Nuts & Bolts for fixing on the existing panel board etc. as required( Site visit recommended)..

Fabrication & fixing of Sheet made from 16 gauge thick Galvano sheet, powder coated in suitable colour over a coat of primer, Nuts & Bolts for fixing or welding on the base or roof of the existing panel board etc. as required( Site visit recommended)..

Supply and fixing of black coloured, 8mm width, Rubber beading of suitable size for panel door etc as required.

Fabrication ,Design and Installation of the following dust,weather and vermin proof outdoor type floor mounted panel with hinged door confirming to IS and IE rules made out of 14 gauge galvano sheet and duly powder coated with provisions for fixing 3 phase vertical 4 way double doorDB along with proper connectors and cable end terminations and provision for cable entry along with necessary civil work if required. ( Site visit recommended).

Fabrication , Design and installation of the following dust,weather and vermin proof outdoor type floor mounted panel with hinged door confirming to IS and IE rules made out of 14 gauge galvano sheet and duly powder coated with provisions for fixing 1 phase horizontal 4 way DB along with proper connectors and cable end terminationsand provision for cable entry and necessary civil work if required. ( Site visit recommended).

Fabrication,Design and installation of the following dust,weather and vermin proof outdoor type floor mounted panel confirming to IS and IE rules made out of 14 gauge galvano sheet and duly powder coated with provisions for fixing 1 phase horizontal 16 way DB along with proper connectors and cable end terminations and provision for cable entry and necessary civil work if required. ( Site visit recommended).