DOOR TO DOOR MAINTENANCE OF CERTAIN FURNITURE ARTICLES UNDER AGE(I) LANSDOWNE.

Amount

1.00 Charpoy GI/IP/Iron/MAP with plywood top (a) Removing of unserviceable old plywood from charpoy tightening of loose components of (i.e. complete charpoy), S&F plywood of required size 12 mm thick BWR grade ISI marked confirming to IS: 303 ,with mild steel galvanised iron nuts and bolts of required size and suitable length. welded over the long rails. 14 Nos of semi circular top bolt of 6 mm dia 75 mm long and nut with steel washers to be used for fixing of plywood top including drilling holes complete all as directed by engir - in charge . FD-220, FD/MAP-II/01/ similar pattern.

(b)Removing of unservicable long rail and S & F new long rail of GI trubing 32 mm bore medium grade (ISI marked) duly threaded both ends all as per drg. FD-220/Similar pattern

(c) Removing of old unserviceable short rail and making of 2 Nos short rails from long rails obtained from item No. 1 (b) and threading the both ends of short rails and fixing in position complete. FD-220

(d) Removing of old unserviceable legs and making of 2 Nos legs from short rails obtained from item No. 1 (c) and threading the both ends of legs and fixing in position complete. FD-220

(e Removing of unserviceable 3 way elbow and S & F new GI elbow 32 mm dia ISI Marked as per drawing. FD-220

(f) Removing of unserviceable check nuts and S & F new 32 mm dia GI Check nut (thickness of check nuts shall not be less than 8 mm) all as per drawing. FD-220

(g) Removing of unserviceable Caps and S & F new 32 mm dia GI Caps ISI Marked welding to GI Legs all as per drawing. FD-220

(h)Removing old UNSV.flate iron of Charpoy GI/Iron/IP pipe and providing safe stiffener of flate iron 900mmx25mmx5mm and duly painted with two coat black colour synthetic enamel paint over red oxide primeand directed by Engr in Charge FD-220

(j)Removing old UNSV. MS tube of Charpoy IP/MAP and providing safe stiffener of MS tube 900mmx 25mmx25mmx1.6 gagu eand duly painted with two coat black colour synthetic enamel paint over red oxide prime and directed by Engr in Charge FD/MAP/01

2.00 Chair CB steel with Arms (a) Removing of unserviceable seat and S & F Foam Cushion 75mm thick, 32 density in one piece duly covered with superior quality rexene as approved by AGE(I) Lansdowne shall be fixed over seat base of plywood commercial 12mm thick BWP grade confirming to relevant IS, Make: Kitply/Greenlam/Archidlam and providing flat iron approx 490 x 15 mm stiffeners 2 Nos as per drawing FD - 75

(b) All as per item No 2 (a) above but back seat of chair.

(c) Removing of unserviceable hand rest and S & F new hand rest covered with superior quality rexene with foam made of 1st class seasoned teak wood .

(d) Removing of unserviceable PVC caps and S&F new caps as per drg. FD - 75

(e) Removing of unserviceable shoe and S & F new PVC/hard rubber shoes as directed by Engr in Charge. FD - 75

3.00 Chair CB steel without Arms (a) Removing of unserviceable seat and S & F Foam Cushion 75mm thick, 32 density in one piece Make: Sleepwell/Kurlon duly covered with superior quality rexene as approved by AGE(I) Lansdowne shall be fixed over seat base of plywood commercial 12mm thick BWP grade confirming to relevant IS, Make: Kitply/Greenlam/Archidlam and providing flat iron approx 470 x 15 mm stiffeners 2 Nos as per drawing FD - 75

(b) All as per item No 3 (a) above but back seat of chair. FD - 75

(c) Removing of unserviceable PVC caps and S & F new caps as per drg FD - 75

(d) Removing of unserviceable shoe and S&F new PVC shoes as per drg FD - 75

4.00 Almirah Medium/Small Steel with Shelves and 1/2h 1/2Sh (a) Removing unserviceable handle and S & F CP handle 125 mm with nut and bolts as per drg. FD-1032/1034/Similar pattern.

(b) Removing unserviceable locks and S&F brass locks of any type 6 lever as per drg. FD-1032/1034/Similar pattern.

(c ) Removing unserviceable locking device and S&F new device including MS Rod rest all as per drg. FD-1032/1034/Similar pattern.

(d) Adjustment of the existing shelves by providing new clamps removing unserviceable clamps all as directed. FD-1032/1034/Similar pattern.

(e) Taking out unserviceable hinges S&F new hinges 75mm of reqd size as per drg. FD-1032/1034/Similar pattern.

(f) Taking out unserviceable legs S&F new legs made out of 1 mm MS sheet as per drg. FD-1032/1034/Similar Pattern.

(g) Taking out unserviceable shelves and S&F new shelve made out of 1mm MS sheet as per drawing. FD-1032/1034/Similar Pattern.

(h) Taking out unserviceable shutters and S&F new shutters made out of 1mm MS sheet as per drawing. FD-1032/1034/Similar pattern.

5.00 Locker Bed Side (a) Removing unserviceable handle and S & F CP handle 100 mm as per drg. FD-1029/ FD-562

(b) Removing unserviceable hasp and stepple and S&F new hasp and stapple chromiun plated as directed by Engr in Charge. FD-1029/FD-562

(c ) Taking out unserviceable hinges S&F new hinges 75mm of reqd size as per drg. FD-1029/FD-562

(d) Taking out unserviceable legs S&F new legs made out of 1 mm MS sheet as per drg. FD-1029/FD-562

(e) Taking out unserviceabled shelves and S&F new shelve made out of 1mm MS sheet as per drawing. FD-1029/FD-562

(f) Taking out unserviceabled shutters and S&F new shutters made out of 1mm MS sheet as per drawing. FD-1029/562

(g) Taking out unserviceable conduit pipe and S&F new conduit pipe 20 mm dia of 1.6 mm thick MS CP as per drawing. FD-1029/562

6.00 Table 3' x 3' Steel(900x900mmx760mm) (a) Removing unserviceable top and S & F new top made out of 18/19 mm prelaminated Particle board exterior grade of shape and size with 6 mm thick teak wood beading all around as shown in drg. FD-1009

(b) Taking out unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing. FD-1009

(c) Removing of unserviceable rail and S & F new rail of conduit pipe 25 mm 1.6 mm thick as per drg. FD-1009

(d) Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing FD-1009

7.00 Table office Clerk Steel (a) Removing unserviceable top and S & F new top made out of 18/19 mm prelaminated Particle board exterior grade of shape and size with 6 mm thick teak wood beading all around as shown in drg. FD-84/1004

(b) Taking out unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing. FD-84/1004

(c) Removing unserviceable locks of drawer and S&F brass locks of any type 5 lever as per drg. Make harison/ Godrage FD-84/1004

(d) Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing FD-84/1004

8.00 Table office officer steel (a) Removing unserviceable top and S & F new top made out of 18/19 mm prelaminated Particle board exterior grade of shape and size with 6 mm thick teak wood beading all around as shown in drg. FD-1002/1003

(b) Taking out unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing. FD-1002/1003

(c) Removing unserviceable locks of drawer and S&F brass locks of any type 5 lever as per drg. FD-1002/1003

(d) Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing FD-1002/1003

9.00 Bed Hard Steel: FD/E6/MAP/08(R) (a) Taking out old unservicable long rails of bed Hard Steel and Provide of new long rails of bed steel specified as per Drg same shape and size duly painted color black, all as spefied and shown on drawing. FD/E6/MAP/08(R)

(b) Taking out old unservicable short rails of bed Steel and Provide of new Short rails of bed steel specified as per Drg same shape and size duly painted color black, all as spefied and shown on drawing. FD/E6/MAP/08(R)

(c) Replacement of unserviceable Particle Board from Head Rest and providing 18/19mm thick Particle board Size specified as per Drg. FD/E6/MAP/08(R)

(d) All as per item No 17 (c) above but size 18/19mm Particle for foot Rest size as per Drg.FD/E6/MAP/08(R)

(e) Dismantling of unserviceable plywood top with new plywood 12 mm commercial BWR confirming to IS 303 as shown on drg. FD/E6/MAP/08(R) /Similar Pattern.

(f) Taking out unserviceable stiffener of Bed Steel and S&F new stiffener Specified as per shown on drg. FD/E6/MAP/08(R)

10.00 Painting: Removing old paint, dust and dirt etc from the entire surfaces of items by specified method, filling up holes cracks and patches with specified materials preparing surfaces by applying primer and painting two coats of synthetic enamel paint of colour as desired complete for following items :-

(a) Table 3x3(900x900x760mm) steel FD-1009

(b) Almirah steel medium with shelves and 1/2h 1/2sh/ Similar Pattern FD-1032/1034

(c) Table office Clk Steel FD-84/1004

(d) Table office Officer Steel FD-1002/1003

(e) Chair CB steel without Arms.FD-75

(f) Chair CB steel with Arms FD-75/with hand rest

(g) Bed Hard Steel FD/E6/MAP/08(R)

VARAROHA BUILDERS (BID ID -3215024)