CA NO CWE / HILLS /RKT/66 OF 2020-21 SPECIAL REPAIR TO OTM BLDG NO 139 F4/8 AND 13 (OR MD ACCN) AT CHAUBATTIA UNDER GE RANIKHET

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

M&L for screed bed or bedding Layer 15mm thick in cement mortar 1:6 for laying floor finishes/ tiles complete all as specified and as directed.

S&F coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S&F coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm, in floors etc set and jointed with silicon joint complete all as specified and directed.

S&F coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm, on vertical surface as skirting set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L rendering 10mm thick in cement mortar 1:4 on brick work or concrete surfaces to receive tiles complete all as specified and directed.

S&F coloured glazed ceramic tiles in vertical surface 450 x 350 x 6 to 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to matchcomplete all as specified and as directed.

Dismantling of stone slab and tiles of any description or thickness laid dry and pointed in floors, apron etc complete all as specified and directed.

M&L for kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for black Granite (of any type) tiles 18 to 20 mm thick machine cut , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishig types in cooking platforms and like complete all as specified and directed.

Dismantling of boarding, any description fixed in any position like wall, wooden flooring and ceiling boards (fiber, pulp, insulation etc,) or insulation boards/ slabs/ blankets, any thickness including cover fillet complete all as specified and directed.

S&F 2nd class hardwood 25 mm thick boarding plain one side with butt joint fixed with nails complete all as specified and directed.

Fixing only 2nd class hardwood boarding of any thickness with nails complete all as specified and directed.

M&L for forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 20mm graded stone aggregate as in slabs supported on walls, beams, Chajja, collumns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like complete all as specified and directed.

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work n.exc. 200 mm thick to rough finished (horizontal or sloping ) complete all as specified and directed.

M&L for mild steel TMT bars 6 mm to 8 mm dia , cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia securing with clips complete all as specified and directed.

Demolition of cement concrete as in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-2 (using 40 mm grade stone aggregate) alloy in plinth protection including finishing even and smooth without using extra cement complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8 ) type D-2 as in sub base finished fair and even complete all as specified and directed.

M&L for chequred cement concrete tiles of size 300x300x22 mm thick coloured rubber pressed glossy finish, set and jointed in neat cement slurry and pointed in white or colour cement and match the surace of tiles as floor/staps complete as all specified and directed.

Taking down cement plaster of any description, thickness on brick, stone, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, removal of rubbish and cleaning, etc complete as directed and specified.

M&L for rendering 15mm thick on fair faces of brick work or stone masonary or concrete work in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on other than fair of faces brick work in two layers, Ist layer 10mm thick in cm 1:6 and IInd layer 5mm thick in cm 1:4 finished even and smooth with water proofing compound complete all as specified and directed.

M&L rendering 10mm thick on ceiling in CM 1:3, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coat of distemper oil emulsion over a coat of chalk whiting primer, preparatory to distempering complete all as specified and directed.

M&L for preparation of newly plastered or old plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer with alkali resistant priming paint complete all as specified and directed. (NOTE- Old painted surface should be completely removed by brushing, washing etc)

M&L for complete removal of existing treatment for preparation old painted surfaces and applying two coat of distemper oil emulsion over a coat of primer complete all as specified and directed.

M&L for preparation of new plaster surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation old plastered surface of ceiling and applying two coats of white wash complete all as specified and directed.

Demolition of brick work in cement mortar including all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L precast cement concrete 1:3:6 type C1 (using 20 mm graded stone aggrigate) as in block masonry with solid blocks exc 10 cm in width and set in cement mortar 1:6 complete all as specified and directed.

M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in CM (1:6) complete all as specified and directed.

M&L brick work with sub class B bricks straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and directed.

M&L rendering 10mm thick on fair face of brick work or concrete surfaces in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed.

Taking down Chowkhats or frames n exc 1.5 sqm each (without taking off shutters from frames) complete all as specified and directed.

Refixing chowkhats or frames n exc 1.5 sqm each (without taking off shutters from frames)in the same opening complete all as specified and directed.

Taking down Chowkhats or frames exc 1.5 sqm but n exc 4.0 sqm each (without taking off shutters from frames) complete all as specified and directed.

Taking down shutter of any description n exc. 1.0 Sqm each complete all as specified and directed.

Refixing shutter of any description n exc. 1.0 Sqm each in same opening complete all as specified and directed.

M&L for 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 35 mm thick IInd class hardwood, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F 35mm thick glazed and skeleton shutters in 2nd class hardwood, open rebated and prepared to receive glass, gauze, etc. divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamered complete all as specified and directed.

S&F 35mm thick glazed and skeleton shutters in 2nd class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F 100mm long, aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm long, aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 140 mm floor door stopper of chromium plated body with rubber shoe fixed in door complete all as specified and directed.

S&F mild steel 150mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 75 mm size butt hinges medium weight colled rolled mild steel complete all as specified and directed.

S&F stainless steel butt hinges 100mm size medium weight and fixed complete all as specified and directed.

S&F 150mm size aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100mm size aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F of 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed.

M&L for 25 mm thick block boards, grade 1 quality, exterior grade, decorative face on both faces fixed with screw to timber frame work in cup board shutters/ shelves including teak wood beading complete all as specified and directed.

S&F Continuous (piano) hinges width 30 mm mild steel, bright finish or eletro galvanised complete all as specified and directed.

S&F 100 mm long hasp and staple mild steel, wire type,stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

M&L for 12 mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work in kitcken cabinate /palmet boxes or in narrow width not exc 15 cm each, rebated or flt edged complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10cm width or girth, not otherwise described and apply two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth, not otherwise described and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.

M&L for framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars barred iron doors, ladders, framed balusters, wlak ways, railings, fram work of water tanks and similar work etc complete conforming to Fe 290-0 grade-E-165 complete all as specified and directed.

S&F mild steel work in rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates FE-290 Gde E-165 complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out glazing pins/spring clip and providing and fixing new ones complete all as specified and directed.

S&F 3.0 mm thick figured glass, pin headed type and glazing with beading/ oil putty in square n. exc 0.5 sqm in each pane complete all as specified and directed.

S&F 3.0 mm thick, sheet glass, ordinary quality and glazing with beading/ oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specfied and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specfied and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking up or down 15 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.

Taking up or down 20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.

Cutting chases to brick wall, pinning in. making good to facings where required and plaster in cement mortar 1:4 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F GI tubing of 15 mm dia, medium grade with all fittings and fixed to walls or ceiling or laid in floors complete all as specified and directed.

Refixing only GI tubing of 15 mm dia, medium grade with all fittings and fixed to walls or ceiling or laid in floors complete all as specified and directed.

S&F GI tubing of 20 mm dia, medium grade with all fittings and fixed to walls or ceiling or laid in floors complete all as specified and directed.

Refixing only GI tubing of 20 mm dia, medium grade with all fittings and fixed to walls or ceiling or laid in floors complete all as specified and directed.

S&F in repair 15 mm bore stop valve fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipeor for union complete all as specified and directed.

S&F in repair 15 mm bore stop valve fancy type chromium plated cast copper alloy with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipeor for union complete all as specified and directed.

S&F in repair vitreous china wash basin, white, flat back, size 550mm x 400mm, (flat back or angle back type) including brackets and including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in repair 15 mm bore Fancy type pillar taps, chromium plated, cast copper alloy, with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F 32mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair 15 mm bore dia bib taps, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and directed.

S&F in repair 15 mm bore dia push type bib taps, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and directed.

S&F in repair vitreous china squating pan "ORISSA PATTERN" of size 580mm x 440mm white with integral foot rest with P or S trap, including connection to trap and flushing trap, front or back inlet including provn of lime concrete bedding and making good to floor complete all as specified and directed.

S&F in repair long arm traps 100 mm P or S complete all as specified and directed.

M&L for sunken floor treatment as described as under :- (i) Demolition of cement concrete of any description and in any position not otherwise specifically provided or in any type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. (ii) M&L to fill the sunken floor with PCC ( 1:5:10) type E-2 using bk aggregate over the treated surface complete all as specified and directed. (iii) M& L 40mm thick (Min) PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate with integral water proofing compound as per manufacturer instructions on bottom of sunken portion with proper slope towards spout. Vertical sides shall be plastered in CM (1:3) 15 mm thick mixed with water proofing compound as per manufacturer instructions. Plaster shall be extended over PCC coving when the same is green i.e. PCC & plaster be carried out at the same time complete all as specified and directed. (iv) After laying sewage/ plumbing pipes with fixtures in position 2 coats of OMIPLAS EP-101 epoxy compound shall be applied complete all as specified and directed.

(v) Spouts of 25mm dia GI pipe light grade projecting 450mm clear of face outer a wall with mosquito proof cap on inner face of pipe shall be provided to drain out seepage water ,including cutting holes and making good if needed as specified and directed. (vi) Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defects complete all as specified and directed.The sunken portion shall be tested for leakage / seepage / dampness by pounding with water for 72 hours. In case any defect is noticed the portion shall be grouted with cement slurry mixed with suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated.

S&F in repair PVC flushing cistern 10 litre capacity, low level, symphonic action type, white, with Inlet, ball valve, float and handle including bracket, connection to pipe complete all as specified and directed.

S&F 600mm x 450mm looking mirror 5 mm thick glass PVC moulded Frame and fixed to wooden plug with CP brass screws and cup washers complete all as specified and directed.

S&F 32mm bore flushing pipe of polyethylene of low or high density or PVC for low level cistern complete all as specified and directed.

S&F 75mm bore cast iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 complete all as specified and directed.

S&F in repair 100mm bore cast iron soil waste and vent pipes (spun pipes) in any length with or without ears, with cement joints fixed to walls or floor complete all as specified and directed.

S&F 100mm bore cast iron bends diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 100mm dia cost iron cowl complete all as specified and directed.

S&F in repair 75mm bore cast iron soil waste and vent pipes (spun pipes) in any length with or without ears, with cement joints fixed to walls or floor complete all as specified and directed.

S&F in repair 75mm dia cost iron cowl complete all as specified and directed.

S&F brass chromium plated 20 mm dia tubular towel rail, D type, 60 cm long between flanges complete all as specified and directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair stainless steel wall mounted plate rack of size 780mm x760mm x 240mm, thickness of sheet not less than 1.00mm and weight not less than 7.50 kg of approved design/pattern (as approved by Engr-in-charge) with provision for keeping plate and other crockery, fixed with screw and rawl plugs etc on wall complete all as specified and directed.

S&F in repair chromium plated shower roses 125mm size swivel type including fixing to steel pipe or union complete all as specified and directed.

S&F 20mm dia aluminium alloy anodised curtain rod decorative fancy type with brackets complete all as specified and directed.

S&F PVC connections 15mm size with length 450mm PTMT nuts and washers at both ends complete all as specified and directed.

Dismantling/ disconnecting water tank exc 250 ltr but n exc 500 ltrs and removing to store complete all as specified and directed.

S&F 500 litre rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

Fixing only exc 250 ltr but n exc 500 ltrs water storage tank after cleaning reconnecting in position complete all as specified and directed.

S&F 20mm bore ball brass valve high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

Fixing only steel sheet any type, any thick, fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

S&F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts, with bitumen washer/ screw complete all as specified and directed.

S&F 0.63 mm thick plain galvanised, mild steel sheeting, in ridge, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 fixed with L - Type of J- type or cranked hook bolts, with bitumen washer/ screws complete all as specified and directed.

M&L for providing, cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in surface channel of drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete, using extra cement, including forms, moulds, mitred/ stopped end complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) any thickness, including cover fillets including frame work complete all as specified and directed.

S&F for powder coated Mild steel snap grid frame work for false ceiling comprising of following section for making partitions of 600 X 600 mm size fixed to walls with rawl plugs and screws and hang to roof with 2 mm dia in double layer GI wire suspender of suitable length and butterfly clips size of main tee shall be :- (i)37mmx24mmx0.3mm thick, (ii)Cross Tee 28mmx24mmx0.3mm thick and (iii)Wall angle 24mmx24mmx0.3mm thick.

S&F 4 mm thick designer ceiling (E-board classic) board / tiles for insulation and accoustic purpose, 595 X 595 mm size fixed with staples on snap grid as in ceiling with and including dusting of surface and applying two coats of oil bond distemper over a coat of primer complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B-0, using 12.50 mm graded stone aggregate as in top of roof complete all as specified and directed.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts etc. not exc. 10 Sqm on plan and getting out in hard/ dense soil complete all as specified and directed.

Demolition and breaking up drain pipes 150 mm (salts glazed ware ,AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M&L 150 mm dia Salt glazed stone ware drain pipes laid in trenches and jointed complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150mm bore complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing excavated soil exc 250 M but n exc 1.50 KM and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.

Taking down carefully copper /aluminium point wiring (light,fan,socket or power ) complete fittings such as switches and fixtures ceiling roses, pendants, regulators, sockets, lamp holders, bracket light fittings, bulk heads fittings, tube light fittings etc removing the materials from site and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L for point wiring one light/ fan/ bell point controlled by one switch with 1.5 Sqmm size, PVC insulated and unsheathed 1100 volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia )with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed.

All as per item No.128 herein before but one light point controlled by two way switch complete all as specified and directed.

All as per item No.128 herein before but one socket outlet 5 pin 5 amps controlled by one switch on same board complete all as specified and directed.

All as per item No.128 herein before but one socket outlet 5 pin 5 amps controlled by one switch on independent board complete all as specified and directed.

All as per item No. 128 herein before but wiring with 2.5 sqmm copper wire (FRLS) PVC and 2.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board complete all as specified and directed.

S&F switch piano flush type single pole, one way 5 Amp complete all as specified and directed.

S&F switch piano flush type single pole, two way 6 Amp complete all as specified and directed.

S&F socket out let multi 5 pin, 5 Amps, flush type complete all as specified and directed.

S&F switch piano flush type single pole, one way 15 Amp complete all as specified and directed.

S&F socket out let 2 in1,3 pin, 5 and 15 Amp, flush type complete all as specified and directed.

S&F ceiling rose, PVC/ Poly carbonate, isolated body three terminal complete all as specified and directed.

S&F lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed.

S&F call bell ding dong AC, 230V single pole fixed over with and including sunk supressed steel box of size 175mmx100mm with 3mm thick plastic laminated backalite shut cover fixed with brass screw complete all as specified and directed.

S&F bell push piano flush type single pole, one way 5 Amp complete all as specified and directed.

S&F High quality LED CRCA T-8 indoor batten tube light 20 Watt with co extruded polycarbonate body including one LED tube rod and driver, internally pre wired of 1.5 sqmm twin twisted flexible cable complete all as specified and directed.

S&F MCB, TPN, 415 volts, 63 to 100 Amp, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed.

S&F MCB Single pole 240 V 6 to 32 Amp, rupturing capacity 10KA 'B' curve type complete all as specified and directed.

S&F MCB SPN, 240 V 32-63 Amp, rupturing capacity 10 KA, 'B curve type complete all as spcified and directed.

S&F sheet metal enclosure for DBs double door type, single pole and neutral 4 way including blacking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed.

S&F sheet metal enclosure for DBs double door type, single pole and neutral 8 way including blacking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed.

S&F sheet metal enclosure for DBs double door type, triple pole and neutral 4 way including blacking plate as required with 200 Amps rated bus bar, 415 volts fixed complete all as specified and directed.

M&L for sub main wiring PVC conduit concealed type with 2 runs of 6 Sqmm for phase, neutral and 4 Sqmm for earth continuity PVC insulated unsheathed cable FRLS grade with copper conductor single core multi stranded 1100V grade confirming to IS - 694 drawn through and including 25mm dia concealed PVC conduit (Heavy grade as per IS - 9537, Part - III) including conduit including PVC conduit accessories not less than 20mm dia including conduit accessories, junction boxes etc complete all as specified and directed. NOTE:- 2 Runs of 6 Sqmm + 1 run of 4 Sqmm cable, 1 run of PVC conduit shall be measured as 1 RM.

S&F LED Bulb 9 Watt complete all as specified and directed.

S&F LED bulk head fitting, 1 x 12 watt with PDC aluminium housing and milky diffuser, complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed.

M&L for earthing complete with galvanised steel, earth plate electrode 600x600mm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25 mtrs below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electrical plate No 3 on page 497 of MES schedule 2009 Part-I connected to main switch board/ main DBs/ earthling test point including all necessary excavation and earth work in hard/ dense soil common salt and charcoal dust mixed and packed 150mm thick all round the GI earth plate, watering pipe 20mm dia GI medium grade. GI sheet 0.63 mm thick funnel, wire gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round bars 6mm dia @ 150c/c both ways and pit/chamber in PCC 1:3:6 type C1 with suitable lifting handle to cover, GI protection pipe 15mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed.

Supply and laying, connecting GI earth wire 4 mm dia for extending earth continuity from test point to distribution box including accessories for fixing complete all as specified and directed.

Supply and lay cable XLPE insulated screened PVC bedded, galavanized steel strip of wire armoured ,electric power cable 1100 V with standard aluminium conductor of size 16 Sqmm 2 core including cable glands and lugs complete all as specified and directed .

Removing excavated material not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete fitting complete all as apecified & directed

Supply and lay burnt bricks sub class ‘B’ old size laid dry in trenches across the cable for cable protection complete all as specified and as directed.

M&L for sand cushioing for cable protection in trenchh, 8cm below the cable and 15cm above the cable including levelling and gently punning to the full width of the cable trench complete all as specified and directed.

Supply and laying steel water tubing, galvanized, light grade, of size 40mm dia including fittings complete for cable protection complete all as specified and directed.

S&F LED security light 35 watt luminaire fitting IP 65 poweder coated pressure die cast aluminium high power LED street light with heat resistant toughened glasswith lens with electronic driver fitting will be fitted with GI pipe light grade bracket 1.2 mtr long 40 mm dia fixed wall with suitable size 2 Nos MS clamp including nut, bolts and washers and making connection with using 1.5 sqmm PVC insulated Multistranded copper conductor three single core cable complete all as specified and directed.

S&F exhaust fan metallic body ISI mark, 300 mm size with louvers including cutting openings, through brick / stone wall , making of holes and grouting of suitable size of nuts and bolts for 300 mm exhaust fan and making good dismantled portion and making connection with wire of suitable size and connecting accessories complete all as specified and directed.

S&F sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 240 Volts 20 Amps complete all as specified and directed.

aditya construction

Builders Harpal