Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.1 LAccepted-AOC NH 31 GAIRKATA PO SAKOAJHORA DIST JALPAIGURI W B PIN 735212 | JALPAIGURI | WEST BENGAL | 735212 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹32.4 L+₹1.7 L (5.70%)Rejected-Finance 777 AMAR NAGAR VILLAGE TOWN CITY RAE BARELI RAEBARELI UTTAR PRADESH 229001 INDIA | RAE BARELI | UTTAR PRADESH | 229001 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹34.2 L+₹3.6 L (11.8%)Rejected-Finance BANKIM CHANDRA ROAD HAKIMPARA SILIGURI DIST DARJEELING PIN 734001 W B | JALPAIGURI | WEST BENGAL | 734001 | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹34.8 L+₹4.1 L (13.5%)Rejected-Finance P O BINNAGURI 735203 DISTT JALPAIGURI W B | JALPAIGURI | WEST BENGAL | 735203 | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹35.0 L+₹4.4 L (14.2%)Rejected-Finance DS COLONY BINNAGURI TG ROAD OPP MILAN SANGH CLUB POST BINNAGURI DISTT JALPAIGURI W B PIN 735203 | JALPAIGURI | WEST BENGAL | 735203 | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
27 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (SOUTH) BINNAGURI
GE (SOUTH) BINNAGURI, PO - BINNAGURI, DISTT - JALPAIGURI, PIN - 735232
REPAIR AND REPLACEMENT OF JOINERY AND OTHER MISC WORKS AT MD, OTM AND MES AREA AT WEST SIDE OF LEHL MARG UNDER GE (S) BINNAGURI
2023_MES_588359_1
8563/E8
Open Tender
Civil Works
Item Rate
180 days
GE (SOUTH) BINNAGURI
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE (SOUTH) BINNAGURI
₹88,000
Yes
4 May 2023
6 Apr 2023
29 Apr 2023
6 Apr 2023
27 Apr 2023
20 Apr 2023
Amount
Taking down chowkats or frames exc 1.5 Sqm and n.exc 4 Sqm (without taking off shutter from the frames) and removal from site.
All as item No 1 here-in before but n.exc 1.5 Sqm each.
Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each.
Taking down shutters and refixing in same openingof any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.
Re-securing or Easing and adjusting without taking down of shutter of any description exc 1 sqm but not exc 2.0 sqm complete all as specified and as directed.
Dismantling wall and ceiling board (fibre pulp, insulation etc) or insulation boards any thickness including cover fillets
Dismantling floor hearth or wall tiling including cement mortar bedding (incl backing) removing serviceable tiles to store and rubbish off the premises.
Taking down cement plaster any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc.
Dismantling wrought iron or mild steel work of any description not otherwise provided for grils.rails etc
Hacking out of old broken glass any thickness size quality or description from metal frame including punching or drilling out old glazing pins.
S&Fof 3mm thick sheet glass panes ordinary quality n.exc 0.5sqm each fixed to steel frame complete with oil putty in square including steel pin.
All as per item No.11 here-in- above but 4mm thick figured glass pin headed type n.exc 0.5sqm each fixed to steel frame complete
M & L for providing plain cement concrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.
S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x60 mm
S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x60 mm
M&L for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded on chamfered put together with glue pinned and joints.
M&L for plain, framed, factory made panelled shutters 35 mm thick (any number of panels) , with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats.
S&F second class hardwood, factory made glazed and skelton shutters 35 mm thick open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I Section8, Clause 8.20 (a) supplied and fitted to chowkats.
S&F of factory made steel windows with side hung shutters openable type including friction/projected type hinges steel handle and peg stay complete without glazing bars fixed to existiog opening and making to match as per existing surfaces.
S&F of factory made steel windows with side hung shutters openable type including friction/box type hinges steel handle and peg stay complete with glazing bars fixed to existiog opening and making good to match as per existing surfaces including taking out old/unserviceable steel windows.
S&F in repairs of factory made steel ventilator with top hung shutter including friction/ box type hinges ,steel peg stay complete including taking out old/unserviceable steel ventilator and making good to match as per existing surfaces etc complete all as specified and directed .
S&F Powder coated aluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge including taking down of old existing steel window and making good disturbed surface of wall complete all as specified and as directed.
S&F Powder coated aluminium louvered ventilators of size 600X600mm with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazing cleats, rubber packing , anodised aluminium snap beading,screws, anodised aluminium fittings and 5.5mm thick tinted glass fixed in panels with suitable locking arrangements including taking down of old existing steel ventilator and making good disturbed surface of wall complete all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing on SI page No 156 of SSR Part-II completed.
S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing on SI page No.160 of SSR Part-II completed.
S&F of in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned tacks,or galvanised wire staples.or wooden beadings for doors complete all as specified and directed.
M&L for MS flat iron bent to shape, holes drilled etc complete as in hold fast & wind ties etc including one coat of red oxide paint.
S &F framed work such as grills, guard bars etc with ends of bars shouldered and/or riveted, onforming to Fe - 290.Gde - E - 165.
M&L for mild steel rolled sections conforming to Fe - 410 (Gde E-250) as in main and cross beams, hip and jack rafters; verticals , purlins where connected to common rafter and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates.
S&F in repairs of 12mm thick block boards grade -2 quality interior grade,commercial type including teak wood lipping 6mm thick all round fixed with nails to timber frame work complete all as specified.
S&F in repairs of 18 / 19mm thick block board grade 2 quality with decorative face veeners on one face fixed with screws to timber frame work as in repair including teak wood lipping 6mm thick all round fixed with nails complete all as specified.
S&F 8/9mm thick PVC ceiling/wall panels of interlocking types, width 250/255 mm with lamination design and exc 60% of PVC content including necessary H-joints, internal/external corner trim, corner cove,F/J edge trims where required fixed with hidden screws to and incl steel/wooden frame work of width 75mm complete all as specified and as directed.
S & F for Anodised aliminium snap grid frame work for false ceiling confirming IS:733, 737 & IS:1285 ; all as specified and as directed.
S&F 4mm thick (E-Boards) Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws in ceiling complete all as specified and as dirceted.
S&F in repairs of 2nd class hardwood small fittings such as brackets of any type hinge blocks,shaped door window stops and the like including all necessary labours articles n.exc 200cum each.
M&L for two coats of synthetic enamel painting to new wooden surfaces over a coat of pink primer including preparation of surfaces area exc 10cm width & girth.
M&L for applying one coat of synthetic enamel paint including preparation of old wood or wood based surface
M&L for applying one coats of synthetic enamel paint including preparation of old steel surface over 10cm width or girth, not otherwise described.
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm width or girth
M&L for two coat of Oil bound distember on new wall surface including preperation of the surface all as directed and specified.
M&L for applying 1.5mm thick wall care putty on new or old wall surface all as directed and specified complete.
M&L for applying one coat of weather shield paint complete including prepration of wall, chujja, facia etc surface as specified and as directed by Engr-in-charge.
S&F 250mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section complete.
S&F in repair 250mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section complete.
M&L for 150 mm size aluminium anodised cast type handles.
M&L in repair for 150 mm size aluminium anodised cast type handles.
S&F for 150mm long aluminium anodised,barrel tower bolt of extruded section.
S&F in reapir of 150mm long aluminium anodised,barrel tower bolt of extruded section.
S&F for 100mm size mild steel butt hinges medium weight.
S&F in repair of 100mm size mild steel butt hinges medium weight.
S&F for 75mm size stainless steel butt hinges with mild steel hinge pin.
S&F in reapir 75mm size stainless steel butt hinges with mild steel hinge pin.
S &F in repair stainless steel curtain rods 20 -25 mm dia, anodised aluminium alloy with fixing brackets, stops,and complete fitments all as specified and directed.
M&L for non-skid ceramic coloured (400x400x7 to 8 mm thick) tiles set and jointed in neat cement slurry pointed in white or coloured cement to match in floor over 15mm thick screed bed in CM(1:6) all as specified and directed by Engr-in-charge
M&L for glazed coloured ceramic tiles (350x450x7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match over 15mm thick rendering in CM(1:4) all as specified and directed by Engr-in-charge.
S & F Continuous (piano) hinges Width of flaps 30 mm , mild steel, bright finish or electrogalvanised
S&F in repair Hasp and staple, aluminium anodised,100mm long including bolt to hinge plate and fixed with screws
M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar (1:6) finished even & fair.
M&L for rendering 20mm thick in cement mortar 1:4 in two layers of 10mm each using WPC in finishing layer on brick or concrete surfaces finished even & fair (WPC for finishing layer will be paid seperately as supply only).
Supply only integral water proofing compound. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ
SINGH & CO
M/s. MD IRSHAD
BBKundu
M/S RATNESH KUMAR SINGH
M/s. RAMPHAL GARG
M/S East India Traders
M/S MOHAN KUMAR BANSAL
M/S MAJUMDER CONSTRUCTION
Tirupati Construction
ANUP ENGINEERING WORKS
L. B. SHARMA
S.N. GHOSH AND CO.
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .