Restoration of Rain Damages of LWSS Chambi Jola in Tehsil Sadar Distt Mandi HP

Amount

Excavation in foundation and trenches in earth work upto all depth in all kinds of soil such as pick work jumper work,blasting work,chiselling of soft /hard rock where blasting is prohibited in all leads and lifts and including trimming of sides levelling of bed to correct grade stacking the excavated soil in 15cm.layers when required into plinth sides of foundation including consolidating each deposited layer by ramming and watering and then disposing oof all surplus excavated soil as directed in all leads and lifts and soring/strutting timbering and dewatering where ever required to the entire satisfaction of the Engineer-in-Charge.

Providing and laying cement concrete 1:6:12 (1cement: 6 sand ):12 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in:- Foundation & Plinth in all respect and to entire satsfection of Engineer -in-Charge in all leads and lifts.

Random rubble masonry/Polygonal rubble masonery (Uncoursed brought in to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1Cement: 6 Sand: 12 grded stone aggregate 20mm nominal size)at plinth level in cement mortor 1:6 (1 cement : 6 sand) in all leads and lifts.

Half brick masonery in coommon burnt clay building brick in cement mortar 1:4 (1 Cement : 4 Sand) 2nd class bricks.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frames 30x30x5 mm, so as to give a fair finish including centering ,shuttering, propping etc.with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for-in-situ reinforced concrete and plain concrete work in:- Flat surfaces such as soffits of suspended floors roofs landings and the like floors etc up to 200 mm in thickness.

Providing and laying cement concrete 1:2:4 (1 cement: 2 sand : 4 graded stone aggregate 20 mm nominal size) and curing complete excluding the cost of form work and reinforcement in:- Suspended floors, roofs landings and shelves and their supports balconies beams girders. bressumers and cantilivers up to floor two level.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in posi and binding all complete upto plinth level. steel and Medium Tensile steel bars in all leads and lifts.

Supplying and fixing of cast iron manhole cover with frame 455 x 610 mm rectangular C.I. cover (light duty) single seal pattern the weight of cover 23 Kg. and weight of frame 15 Kg The total weight of cover and frame to be not less than 38 Kg. compelete.

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position (2nd class deodar wood) in all leads and lifts.

Providing and fixing panneled glazed or panelled and glazed shutters for doors windowns and clerestory windows, including black enamelled iron butthinges with necessary screws 40 mm thick (2nd Class Deodar Wood) in all leads and lifts

Brick work with common burnt clay machine moulded perforated bricks of class designation 7.5 conforming to IS 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) With Modular bricks in all leads and lifts

15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) in all leads and lifts.

6 mm cement plaster of mix in cement mortar 1:3 ( 1 cement : 3 sand) in all leads and lifts.

White glazed tiles 6 mm thick in flooring cement mortar 1:3 (1cement : 3 sand) finished with flush pointing in white cement.

White glazed tiles 6 mm thick in skirting riser of steps and dado 12 mm thick cement mortar 1:3 (1cement : 3 sand) and jointed with cement slurry.

Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade.

Providing and fixing anodized aluminium sliding door bolts with nuts and nuts screw etc. complete in all leads and lifts. 250x16mm

Providing and fixing anodized Aluminium tower bolts (barrel type) with screws etc. complete in all leads and lifts. 200x10mm

Providing and fixing anodized Aluminium handles with necessary screws etc. complete in all leads and lifts. 125mm

Applying priming coat on new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,greese,dirt and other foreign matters,sand papering and knotting.Ready mixed primer paint brushing wood primer pink complete in all respect.

Painting two coats (excluding priming coat) on new wood and wood based surfaces,with enamel paint to give an even shade including cleaningthe surface of dirt ,dust and other foreign matters sand papering and stopping with enamel paint other than white complete in all respect.

Providing and Fixing automatic flushing cistern with a pair of C.I. or mild steel brackets, complete with fitting including CI syphonic apprature masquits proof lid , C.P. Brass Unions and couplings for connections with inlet, outlet and couplings for connections with inlet, outlet and over flow pipes, including cutting holes and making good the same and overflow pipe to be measured and paid for separately.(Vitrous china 5 liters capacity).

Providing and fixing vitreous china wash down water closet (Indian type, WC Pan)with intergal P & S trap including jointing the trap with with soil pipe in cement mortar 1:1 (1 cement:1 Sand) (seat and cover to be measured and paid for seperately)(white colour).

Providing and fixing100 mm size Por S trap for water closet (squatting pan ) (Indian type W.C. pan) including jointing the trap with the pan and soil pipe in cement mortar 1:4 (1 cement:4 Sand)sand cast iron in all leads and lifts.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P brass pillar taps, 32 mm CP brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P.brass pillar taps in all leads and lifts

Providing and fixing viterious china padestral for wash basin complete recessed at the basic for reception of pipe and fittings Cera sanitary work (carnet) white (Viterious China in White Colour)

Providing and Fixing of water storage tank sintex having of capacity 500 liters with necessary fittings including over flow pipes, scour pipes etc inlet and outlet and inside paint of required size for inlet or outlet and inside paint of approved quality complete including hoisting complete in all respects in all leads and lifts.

Providing and fixing on wall face PVC (D - Plast) rain water pipes of working pressure not less 4.5 Kg/Sqcm including fitting the joints with approved adhesive complete with in all leads, lifts and carriage of materials. 110 mm nominal bore.

Providing and fixing on wall faces PVC door bend (D-Plast) with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive complete 75 mm nominal bore in all leads and lifts

Providing and Fixing to wall ceiling and floor galvanized mild steel tubes (Midium Grade) tube fitting and clamps including making good the wall, ceiling and floor complete in all respect in all leads and lifts.15 mm nominal bore

Providing and fixing full way wheel valve 15 mm dia Gun metal with in all leads and lifts.

Providing and fixing CI Cowl 100 mm dia with in all leads and lifts.

Providing and fixing brass bib tap (supirior quality heavy type) 15 mm dia .

Providing & Fixing CP Brass Soap Dish with CP breckets fixed to wodden plugs with CP brass screws complete in all respect in all leads and lifts.

Wiring for light point/fan point/ exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group C

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. 2x1.50 Sq. mm.

2x2.50Sq. mm.

Supplying and fixing 3 pin 5/6 amps. Socket outlet on the exists switch box/covers including connections etc. as required.

Supplying and fixing 2 way 5/6 amps.Tumbler/piano type switch on the existing switch box on the switch box/cover including connections etc as required.

Supplying and fixing 3 pin 15/16 amps. Socket outlet on the exists switch box/covers including connections etc. as required.

Supplying and fixing 15/16 amps. Tumbler/piano type switch on the existing switch box on the switch box/cover including connections etc as required.

Supplying and fixing wooden box of following size (nominal) on surface or recess with suitable size of phenolic laminated sheet cover of in front as required. 229 mm x 102 mm.x 60 mm. deep

203 mm.x152 mm.x 60 mm deep

Providing and Supplying CFL 1 x 23 watt of reputed make in all leads and lifts

Providing and Supplying of CFL 1 x 5 watt in all of reputed make in leads and lifts

Supplying and Fixing 5 Amps to 32 Amps rating. 240 Volts, L-Series miniature circuit breaker of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required Cat - A. (Single Pole)

Rajesh Kumar (BID ID -502771)

GULZARI LAL (BID ID -502782)