REPAIR /MAINT OF ROOF TREATMENT, GI/ PPGI SHEET, AND SANITARY FITTING AND CERTAIN B/R WORKS OF TECHNICAL AND RESIDENTIAL OF IRDE UNDER GE (I) RND DEHRADUN

Amount

M&L for non-skid coloured ceramic tiles first quality (of approved class, colour and design/shade) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15 mm thick cement screed bed in cement mortar 1:6 for laying floor finishes incl Dismantling floor, hearth or wall tiling cement mortarbedding (but not backing), removing debrish and rubbish off the premises exceeding 500 metre and not exceeding 1000 metre in distence complete all as specified and directed

M&L for non-skid coloured ceramic tiles first quality (of approved class, colour and design/shade) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match,over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles incl Dismantling floor, hearth or wall tiling cement mortarbedding (but not backing), removing debrish and rubbish off the premises exceeding 500 metre and not exceeding 1000 metre in distence complete all as specified and directed

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of size 300x450x7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles incl Dismantling floor, hearth or wall tiling cement mortarbedding (but not backing), removing debrish and rubbish off the premises exceeding 500 metre and not exceeding 1000 metre in distence complete all as specified and directed

M&L vitrified coloured tiles 10 mm thick light shade (square/rectangular) area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick cement screed bed in cement mortar 1:6 for laying floor finishes incl Dismantling floor, hearth or wall tiling cement mortarbedding (but not backing), removing debrish and rubbish off the premises exceeding 500 metre and not exceeding 1000 metre in distence complete all as specified and directed

M&L vitrified coloured tiles 10 mm thick dark shade (square/rectangular) area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match,over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles incl Dismantling floor, hearth or wall tiling cement mortarbedding (but not backing), removing debrish and rubbish off the premises exceeding 500 metre and not exceeding 1000 metre in distence complete all as specified and directed

M&L for polished granite stone slab single piece as in kitchen platform, window cill, steps and similar work including necessary bulk nosing as required 16 to 18mm thick machine cut, rounding edges and polishing, bedded and jointed with grey cement slury and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, over 15mm thick screed bed bedding in CM (1:4) with including dismanting existing ston slabs of any description or thickness in floor and removing debrish and rubbish off the premises exceedding 500 metre and not exceeding 1000 metre in distence complete all as specified and directed Note: Necessary hole for gas pipe to be provided as per location decided.

M & L 40 mm thick PCC (1:2:4) type B-0, (using 12.5 mm graded crushed stone aggregate) in two layers (each 20 mm) with chicken mesh provided between the layers and finished even and smooth with false grooves @ 450x450 mm incl Taking down exsiting water proofing treatment incl PCC padding, plaster, etc complete necessary removal of debries from the premises exceeding 500 metre and not exceeding 1000 metre in distence complete all as specified and directed (Note: Chicken wire mesh shall be measured and paid separately under respective item of sch 'A").

Galvanised steel wire cloth size of 0.36 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed

M&L 10mm thick cement plaster on fair face of concrete surface including repair of doubing roof surfaces in CM 1:3 finished even land smooth without using extra cement over complete all as specified and directed.(Water proofing compound shall be measured and paid sepratly )

Supply only liquid water proofing compound complete all as specified and directed .

Preparing RCC roof slab top by wire brushing and cleaning the dust and forign materail etc complete and applying a coat of hot blown bitumen 85/25 grade @ 1.20kg/Sqm over a coat of bitumen primer @ 0.40 ltrs/Sqm and there after laying of a layer of APP based polymeric membrane (five layered with centre core as 100 microns high molecular high density polyethylene film) weighing 3kg/Sqm and will be laid as per MES SSR Pt-I para 11.43.2.2 with minium side lap 75 mm and end Lap of 150 mm bonded with hot blown bitumen 85/25 gde penetration @ 1.20 kg/sqm and blinded with fine sand in dry condition (pleable free) @ 0.50 kg/sqm dusted over the bitumen coat complete all as sp[ecified and directed.

Taking down shutters of any description and make n. exc. 1 sqm each including removing to store complete all as specified.

Taking down shutters of any description exc 1 sqm & n. exc 2 sqm each including removing to store complete all as specified and directed

Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 sqm and n. exc. 4.00 sqm each including removing to store complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each including removing to store complete all as specified and directed.

S&F 125x 60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.complete all as specified and directed

S&F for framed work as in door and gates of angle or other sections and similar items confirming to FE-290 (Gde E-165) complete all as specified & directed.

M&L for cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4 type B-1, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc. half brick but not exc. one brick complete all as specified and directed.

S&F mild steel work as in bands,strap, supports or stay for rainwater ,ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates, hook and pintle hinges, large hasp and staples, chains hand made sliding bolts, clamps, hold fasts, wallties hook for hanging fans,plain angle cleats for secruing purlins to wood trusses or rafters, knee piece inserts, two way and tree ways straps , plate washers and similar samllarticles confirming to Fe 290 or E-165 complete all as specified and directed

S&F in repair plain aluminium sheet, 0.56 mm thick lining to bottom rail of toilet / bath door shutters and straight flashing, fixed with brass, chromium plated screws etc complete all as specified and directed.

Taking down shutter exc. 1 Sqm and n.exc 2 Sqm each and refixing the same opening after resecuring or easing and adjusting shutters of any description. complete all as specified and directed.

M&L for 40 mm thick flush shutters, solid core construction, exterior grade with block board core and plywood face, pannels, commercial type on both sides and one face is covered withdecorative face veneer with lipping / frame to match, including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.

S&F factory made glazed and Skelton 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded,mitred and rebated sash bars, any numbers , edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc; sizes of members of shutters as specified in SSR Part-I section 8, clause 8-24 (a) complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 150 mm long and fixed complete all as specified and directed.

S&F 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

S&F aluminium handles, cast type, anodised 150 mm size complete all as specified and directed.

S&F floor door stopper double leg of aluminium alloy body of 140 mm length with aluminium base plate of size 50 mm x 40 mm complete all as specified & directed.

S&F in repair floor door stopper double leg of aluminium alloy body of 140 mm length with aluminium base plate of size 50 mm x 40 mm complete all as specified & directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed.

S&F 150 mm, mild steel ordinary helical door spring including roller and roller plate including necessary welding if requried complete all as specified & directed.

S&F in repair 150 mm, mild steel ordinary helical door spring including roller and roller plate including necessary welding if requried complete all as specified & directed.

S&F 125 mm long hasp & staple safty type brass with mild steel hinge pin hinge pin including bolt to hinge plate and fixed with screws complete all as directed.

S&F powder coated aluminium frame for doors, windows or partition including aluminium beading, hinges of required size,jointing cleats, screws, dash,fastners,plug for fixing with wall, columns etc complete all as specified.

S&F powder coated of any colour aluminium door shutters, aluminium section like lock rail, bottom rail 115x38/40 mm and top rail and vertical rail 100x38/40 mm including necessary jointing cleats/glazing clipx, rubber neorene paking, handles 02 Nos in each door, locking arrangment, aluminium snap beading screw etc, complete all as specified and directed. (panels likes prelaminated particle board / sheet glass shall be measured and paid seprately)

S&F powder coated 3 track aluminium sliding window three track with two glass shutters using 4 mm thick glass tinted modi guard and one shutter with stainless steel wire gauge wire cloth 0.31 mm stainless steel wire gauge wire cloth 0.31 mm nominal dia of wire and width of aperature 1.61 mm using aluminium powder coated section aluminium cleat, PVC track, beading handle, lock, rubber beading etc complete fittings as per manufacture instructions Note:- Size of aluminium section are as under:- (i) Three track top and vertical - Jindal main 2010 section No 20621 or equivalent as approved by GE (ii) Three track bottom- Jindal main - 2010 section No 20620 or equivalent as approved by GE (iii) Shtter vertical section- Jindal main 2010- section No 20606 or equivalent as approved by GE (iv) Shutter top and bottom- Jindal Main- 2010 Section 20604 or equivalent as approved by GE (v) shutter verticle middle ( Interlock) - Jindal main - Section or equivalent approved by GE.

Taking down aluminium shutter exc. 1 Sqm and n.exc 2 Sqm each and refixing the same opening after resecuring or easing and adjusting shutters and replacement of top rail, lock rail or bottom rail where required of any description. complete all as specified and directed.

S&F 5 mm thick aluminum composit pannel fixed or laid on door or partition by using rubber based adhesive complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified.

S&F in repair aluminium (die cast) body door closer hydraulically regulated, designation No.3 universal type, suitable for doors shutters up to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete allas specified and directed.

S&F in repairs mortice lock, vertical type of size 100 mm with brass body 2 lever complete all as specified and directed.

S&F in repair aluminium anodised grill with mesh size 75mm and aluminium bar 6mm XPM type including all necessary accesseries such as channel for fixing grill, screw etc aluminium section 15 micron thick anodizing complete all as specified and directed.

S&F in repair 25 mm dia, brass, knobs for cupboard fixed with nut, screw and washer of mild steel, bright finised complete all as specified and directed.

S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting for cabinets fixed with screws complete all as specified and directed.

S&F stainless steel wire cloth 1.23 mm nominal dia of wire and size of mesh 12 mm and fixed with tinned tacks or galvanized steel wire staples complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap (when open) 30 mm complete all as specified and directed.

S&F in reapir 19 mm thick Solid PVC board fixed with steel screw and synthetic adhesive both one side balancing color texture used for shutter of the cabinet / cupboard and all as spd and directed. Note :- Colour approved by GE..

S&F 75 mm size stainless steel butt hinges ISI marked medium weight cold rolled and fixed with screws/welded to frame complete all as spd and directed

S & F in repair 1.25mm thickness of laths steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, haps and staple and one shop coat of primer erected in position as indicated, complete but gear operated type with bevel gear box and crank handle

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames/ aluminum frames glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips etc complete all as specified and directed.

M&L for 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

M&L for 4 mm thick figured glass pin headed type and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

M&L for 4.8 mm thick sheet glass ordinary quality in panes exc 0.50 sqm each fixed with & including rubber gasket in aluminium frame work complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L Brick work with old size sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 incl Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles and removing debrish and rubbish off the premises exceeding 500 metre and not exceeding 1000 metre in distence complete all as specified and directed.

M&L for 15mm thick plastering in CM (1:6) on fair faces of brick work or concrete surfaces finished even and fair without using extra cement with and including taking down cement or cement lime plaster of any description including racking out joints, hacking for keys , scrubing down with water and removing debrish and rubbish off the premises exceeding 500 metre and not exceeding 1000 metre in distence complete all as specified and directed.

S&F in repair drapery rod 25 mm dia, high Strength PVC Coated MS rod of thickness 40/60 microne of wood finish with minimum 8 rings in each metre length of rod of ABS Plastic in matching colour & installations brackets of galvanised steel with all accessories complete all as specified and directed.

S&F solid PVC door frame of size 50mmx 47mm made out of 5 mm plain/ colour PVC sheet reinforced with MS square tube as per specification & drawings specified in SSR Part-II 2010 complete all as specified and directed.

Factory made solid panel PVC wire gauzed shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and directed.

S& F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. Note: Colour approved by GE.

M&L for prepration of new plaster surfaces of wall and applying two coats of oil emulsion distemper over a coat of alkalic resistance primer over and including 1mm thick wall care putty complete all as specified and directed

S&F in repair venetian blind coloured powder coated 35mm wide and 1 mm thick Aluminium alloy blades with opening and closing arrangment including aluminium hanging channel at top with sliding wheel/ring including pulling rope in both side and necessary accessories complete all as specified and directed.

M&L for removing the plants/ vegetation upto Six story height including penefreated roots complete and injecting chemical GLYPHOSPHATW 41% SL 20 ml or till refusal by makimg cut/ injection in the stem of plant 30mm C/C spraying with solution (25ml Glyphospoto 41% diluted with one litre water) including necessary scaffolding etc wk will be carried out upto 6 th storey complete all as per specification and directions

S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws with and including dismantling of plain or corrugated steel sheeting, any gauge, thickness complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws with and including dismantling of plain or corrugated steel sheeting, any gauge, thickness complete all as specified and directed.

M&L for suspended false ceiling system using chicago metallic (E grid)exposed supended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 39 mm X 24mm X 0.8mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X24mmX0.8mm thick and thick wall angle 22.2mmX22.2mmX 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length)with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips(Wt-0.007 Kg/clip)hold down clips (Wt-0.0035 Kg/clip) with Provn of light fixture incl Dismantling of wall and ceiling boards any thickness including cover fillets complete all as specified and directed.

M & L 12mm thick POP/gypsum board ceilng with concealed metal grid system comprising of 80 x 26 x 0.55mm as ceiling section 20 x 27 x 30 x 0.55mm as perimetar channel & 15 x 45 x 15 x 0.9mm as inter mediate channel complete. Frame structure suspend fram roof by ceiling angle of size 25 x 10 x 0.55mm incl Dismantling of wall and ceiling boards any thickness including cover fillets of wall and ceiling boards any thickness including cover fillets complete all as specified and directed.

M&L for PVC SHEET WALL PANELLING of thickness 5mm solid consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm thick prelam PVC sheet. The panel & strips shall be of 600 kg / cbm density manufactured by an ISO-9000 certified company. The strips should two PVC strips. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a U Channel at top, bottom and side edges and strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement incl Dismantling of wall and ceiling boards any thickness including cover fillets complete all as specified and directed ( Note- Including all nesscesary fittings and scafolding for heighted site)

S&F in repair PVC (SWR) pipe 75 mm bore, single socketed , in any length with rubber ring joints and jointed with approved adhesive fixed to wall with M.S clamps etc complete all as specified and directed.

S&F in repair PVC (SWR) pipe 110 mm bore, single socketed , in any length with rubber ring joints and jointed with approved adhesive fixed to wall with M.S clamps etc complete all as specified and directed.

S&F in repair PVC (SWR) pipe 150 mm bore, single socketed , in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed.

S&F in repair PVC (SWR) bend/shoe 75 mm dia, any radius as required and jointed with approved adhesive and fixed to floor complete all as specified and directed.

S&F in repair PVC (SWR) Tee, Reducer/junction (single T) equal or unequal 75 mm dia, any radius as required and jointed with approved adhesive and fixed to floor complete all as specified and directed.

S&F n repair PVC (SWR) bend/shoe 110 mm dia, any radius as required and jointed with approved adhesive and fixed to wall complete all as specified and directed.

S&F in repair PVC (SWR) Tee, Reducer/junction (single T) equal or unequal 110 mm dia, any radius as required and jointed with approved adhesive and fixed to wall complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) floor trap , plain with grating including jointing with solvent cement .

S&F n repair PVC (SWR) bend/shoe 150 mm dia, any radius as required and jointed with approved adhesive and fixed to wall complete all as specified and directed.

S&F in repair PVC (SWR) Tee, Reducer/junction (single T) equal or unequal 150 mm dia, any radius as required and jointed with approved adhesive and fixed to wall complete all as specified and directed.

S&F n repair PVC (SWR) bend/shoe 150 mm dia, any radius as required and jointed with approved adhesive and fixed to wall complete all as specified and directed.

S&F in repair PVC (SWR) Tee, Reducer/junction (single T) equal or unequal 150 mm dia, any radius as required and jointed with approved adhesive and fixed to wall complete all as specified and directed.

M/S P K ARORA

Sharda Enterprises

Amit Associates