Parvat Pond to Sunevkalla WTP connectivity, Floting Pontoon And machinery work Tal:ankleshwar Dist: Bharuch

Estimated Cost: Rs.

VOLUME- III PRICE-BID

Gujarat Water Supply & Sewerage Board

Volume-III,PriceBid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

BREAKUPFOR INTERIMPAYMENTS ..................................................40

Volume-III,PriceBid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

PREAMBLETOPRICESCHEDULE

Name of Project :

“Providing, Supplying, Lowering, Laying & Jointing 350 mm & 450 mm Dia DI

K-7 Pipeline And 406.4 mm Dia MS Pipeline from parvat Pond to Sunevkalla

WTP, Floting Pontoon, Supply And Instllation of puming Machinery and

Operation and maintaiunance for 04 Year Under SZBT-2 Regional Water

Supply Scheme based URBC Taluka- Ankleshwar/Hasot , District- Bharuch.”

1. The bidder shall quote his firm and fixed price for the entire work under this Contract.

Defined in more details in various sections of this bid document.

2. The rates and prices shall be submitted in the electronic formats given by n-procure

which is called Schedule-B. Rates and prices received in any other formats will be

rejected and the Bids will be disqualified

3. It will be entirely at the discretion of the Employer to accept or reject the bidder's

proposal, without giving any reasons whatsoever and the bidder shall not be permitted

to withdraw his bid on this account

supplied from the by client

5. In Schedule-B the Bidder shall quote prices for the items on lump sum / unit rate as

called for against the BOQ item

gives the list of some principal items with tentative quantities of the work there of for the

guidance of the bidder. For any excess over tender quantities, Extra items and

variations in quantities, Refer Clause No 14 of Volume IB-General Conditions of

7. The total of the item prices in Schedule B1. Schedule B2 shall be equal to the price

pendency of the Contract, except for items under-price variation clause. In case of any

Volume-III,PriceBid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

considered and binding on the Contractor. The prices in Schedule B1, Schedule B2 of

the successful bidder shall be corrected accordingly.

8. The bidder is not required to quote their prices in Schedule Cie. O&M prices. The rates

mentioned in the Schedule C for O&M are fixed and will be the basis for payment during

O&M as per tender terms and conditions. The Amount of Schedule-C shall not be

carried forward to Schedule B for comparison and evaluation. But it shall be added to

schedule B (After rebate, if any) for overall cost of tender & shall form a part of the

Contract Agreement.

9. Wherever for a particular item the quantities have been specified payment shall be on

unit rate basis and unit Variation in quantity will be paid with pro rata basis

10. Each item is to be individually priced online and the amounts shall be added up to arrive

blank except where the item description requires the item to be priced on "as

applicable" basis. The item shall not be priced if it is "not applicable to the bidder's

design, in which case the bidder shall add the words "NOT APPLICABLE. The wording

in the item description is for subject matter guidance only, clause references are

indicative only and all other relevant clauses shall also be referred to. The prices shall

allow for all the works covered under the bid and all liabilities and contractual

obligations whether separately specified or not. Items against which no prices are

quoted shall not bo separately paid for and the bidder shall be deemed to have covered

the cost of execution of such items (according to the requirements of the bid document)

in the prices quoted for other items

satisfactory working/safety of the system as specified, will not be separately paid for by

the Employer when executed and shall be deemed to be already covered by other

items and rates listed in the price sheets No extra payment shall be given for any item

which is required to complete and perform the project.

12. Bidder shall not to quote for O&M in Schedule-C. In case of any discrepancy noted in

13. Schedule 'D gives the basis of interim payment for construction of civil works

will be considered for financial evaluation of the bid.

15. The bidder shall be deemed to have allowed in his price for provision, maintenance and

final removal of all temporary works of whatsoever nature required for construction

Volume-III,PriceBid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

including temporary bunds. Diverting water, pumping, de-watering etc, for the proper

execution of works. The rates shall also be deemed to include any works and setting

out that may be required to be carried out for laying out of all the works involved.

16. Prices shall be filled online only.

Specifications and other sections of these bid documents and these documents are to

be taken as mutually explanatory of one another

18. The bidder shall interpret the data furnished and carry out any additional survey work,

or investigation work required at his own cost.

19. The prices quoted shall also include the cost of materials utilized for testing.

20. The bidder should acquaint himself with the site conditions including the access to Work

site. The successful bidder shall have to make suitable access to work sites at his own

cost. These accesses will be used by the other contractors working for GWSSB.

prices shall include all the equipment / materials / accessories and services required as

22. 1% of the value of work will be deducted from the Running bill against labourcesswhich

is non-refundable

23. Third Party Inspection / CSC agency will be deployed by GWSSB and charges of

thesame will be borne by GWSSB.

24. Any expenditure incurred by inspection/ CSC agency for the work misinformed by the

contractor and charges of inspection/ CSC agency without any work due to

misinformation shall be recovered from the contractor.

25. The prices shall be quoted prices shall be quoted exclusive of GST, but inclusive of all

other taxes, royalties and duties prevailing at the time of submission of the bids.

Statutory variation if any during the currency of contract shall have to borne by the

agency which shall be not reimbursed by the GWSSB

26. The rates quoted shall be exclusive of GST, but inclusive of all other taxes, duties

whichshall not be paid extra. While GST will be paid for admissible part of actual work

done attheapproved tender rate and tender conditions of price variations GST shall be

paid as per prevailing rates at the time of payment. The TDS shall be deducted at

source as pervision of IT rules and GWSSB policy.

27. The rate should be quoted exclusive of GST but inclusive of all other taxes as per

volume 1 (B) General conditions of Contract. Clause No

Volume-III,PriceBid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

28. The Bidders shall have to quote the rates in this tender keeping in view at the GST The

Complete responsibility of taxes, duties, levies rests with the Contractor/Agency only

29. The process requires that the bidder shall quote his price for the work components

fix during the entire period of performance of the contract except price variation allowed

for supply of MS/DI/PVC/GI pipe as per Volume-1 (B) Clause No. 59, General

Conditions of contract

30. Payment shall be made for the components for which lump sum prices are quoted, as

per the schedule of payment. Total cost will be worked out on the basis of work done of

individual items and rates quoted against those particular items only.

31. Royalties. The contractor shall be liable to pay the royalty of the quarried materials

minerals used in the construction of works at the ratos specified in the Narmada Water

Resources. Water Supply &Kalpasar Dept. Resolution No. GEN-2010-595- (6)- M.1.Cell

(K-1) Dt 29-4-2011 (Gujarati Version Copy enclosed) and shall be recovered from the

running bills of the work from time to time and remaining amount if any shall be

recovered from the final bill before releasing the security deposit of the work: The

contractor shall fumish the statement showing the quantity of quarried materials /

minerals from whom purchased (with full address of the seller) and copies of the bills for

purchase to the Executive Engineer of the in charge of the work The contractor shall

also furnish such additional information as regards royalty payment to the competent

32. Agency shall have to take Insurance policy and intimate to GWSSB along with the

evidence within time limit. In case of noncompliance entire responsibility shall be rest

with the agency and required amount shall be recovered from any due amount of the

33. GWSSB can recover penalty amount from the agency for not taking the insurance.

Thoughthe penalty amount is recovered, responsibility of the agency for taking

insurance shall becontinued and will not be escaped from the responsibility.

Signatureof contractor ExecutiveEngineer

P.H WorksDiv.,GWSSB

Volume-III,PriceBid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

Bidders are required to fill up all the blank spaces in this Bid Form.

ENGINEER,PUBLICHEALTHWORKS

SUB: “Providing, Supplying, Lowering, Laying & Jointing 350 mm & 450 mm Dia DI K-7

Pipeline And 406.4 mm Dia MS Pipeline from parvat Pond to Sunevkalla WTP, Floting

Pontoon, Supply And Instllation of puming Machinery and Operation and maintaiunance

for 04 Year Under SZBT-2 Regional Water Supply Scheme based URBC Taluka-

Ankleshwar/Hasot , District- Bharuch.”

The bidder shall quote his firm and fixed price for the entire workunderthis Contract,definedinmore

details in varioussections ofthis biddocument.

1. Having visited the site and examined the Bid Documents, Drawings, Conditions of

etc.including Addenda/Amendments to the above, for the execution of the above Contract, we

theundersigned offer to design, Engineer, procure, construct, complete, commission, operate

andmaintain the whole of the said works for 10 years from the date of commissioning

includingdefects liability period as given in Conditions of Contract and in conformity with the

drawings,conditionsofContract,specifications,PreambletoPriceSchedules,Annexure,BiddingDo

cuments,including AddendaNos. (Insertnumbers) forLumpsumfixed

priceofRs. .Rupees

)forConstructionincludingfree trialrun forthreemonthsorsuchothersumasmay beascertainedin

accordance with the conditions.

2. I/Weagreethat

a) IfwefailtoproviderequiredfacilitiestotheEmployer’srepresentativeoranyotherperson/Agency by

the Employer to perform on his behalf for carrying out the inspection

andtestingofmaterialsandworkmanship.

b) If we incorporate into the Works, materials before they are tested and approved by

Volume-III,PriceBid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

theEngineer’srepresentative.

Ifwefailtodeliverpurewaterofrequiredquantityaccordingtothe conditions/stipulationsof the

Contract, the Engineer will be at liberty to take any actionincluding termination of Contract

and impose at his absolute discretion any penalties, and/orrejectthe work.

3. We undertake, if our Bid is accepted, to complete and deliver the works in accordance with

the Contract within 06 months,inclusive of monsoons,from the date or receipt of Letter of

Acceptance issued to us by you.

4. We agree to abide by this Bid for a period of 180 days from the Last date of submission of

thebill and it shall remain binding upon us and may be accepted at any time before the expiry

5. In the event of our Bid being accepted, we agree to enter into a formal Contract

Agreementwith you incorporating the conditions of Contract there to annex but until such

agreement isprepared this Bid together with your written acceptance thereof shall constitute a

bindingContractbetween us.

6. We agree, if our Bid is accepted, to furnish performance /Security in the forms and of value

specified in the Clause1 of Volume-IB,“General Conditions of Contract”.

7. We have independently considered the amounts of liquidated damages shown in Appendix to

Bid and agree that they represent a fair estimate of the damages likely to be suffered by you

in the event of the work not being completed by us in time.

8. We understand that you are not bound to accept the lowest or any Bid you may receive.

Dated this __day of

(Name ofthePerson)

DulyauthorizedtosignBidforandonbehalfof(fillinblockcapitals)

WitnessSignature

Volume-III,PriceBid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

Name of Project :- “Providing, Supplying, Lowering, Laying & Jointing 350 mm &

mm Dia DI K-7 Pipeline And 406.4 mm Dia MS Pipeline from parvat Pond to Sunevkalla

WTP, Floting Pontoon, Supply And Instllation of puming Machinery and Operation and

maintaiunance for 04 Year Under SZBT-2 Regional Water Supply Scheme based URBC

Taluka- Ankleshwar/Hasot , District- Bharuch.”

Scheduleshowingtheapproximatelythematerialstobesuppliedtothecontractorfromgovernmentstores

forthe work tobe executedand therate atwhichtheyaretobecharged.

Rateatwhichthematerial

Sr. will be chargedtothe Place

Particular Qty.

No. contractor of

Rate Unit Delivery

1. The contractor submitting the Tender shall see that the rate in Schedule-A are filled in by the

Engineer in Charge at the time of issue tender.

2. The contractor while submitting the tender shall provide his own arrangement at his own cost

for loading, unloading, and transporting safety to the site of work the cement stipulated in

3. Binding wire of 15 gauge of thinner gauge required for placing the reinforcement in position

shall be provided at his own cost

4. All the materials required for the items other than labour in Schedule - A but available with the

dept will be issued on request to the contractor (for use in this contract only) at prevailing

market rates or departmental issue rates whichever is higher.

5. All the surplus materials supplied by the department. As mentioned in schedule-A should be

handed over to the Department by the contractor at the Govt. stores as directed

6. The materials mentioned in schedule-A shall have to be checked for their correctness and

soundness by the contractor before taking the delivery of the materials from the Government

7. Necessary cement will be purchased by the agency at their own cost from open market.

8. The persons of firm submitting the Tender should see that rates in the above schedule are

filled up by the Executive Engineer, on the issue of form prior to the submission of the Tender

9. Carting of above materials should be done by contractor at his own cost.

10. Contractor should return the balance materials in good and acceptable condition, otherwise

recovery at the double rates will be affected in view of Clause

Date:Signature ofcontractor ExecutiveEngineer

P. H.Works Dn.,G.W.S.S.B

Volume-III,PriceBid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

Name of Project :- “Providing, Supplying, Lowering, Laying & Jointing 350 mm & 450 mm Dia DI K-7 Pipeline And

406.4 mm Dia MS Pipeline from parvat Pond to Sunevkalla WTP, Floting Pontoon, Supply And Instllation of puming

Machinery and Operation and maintaiunance for 04 Year Under SZBT-2 Regional Water Supply Scheme based

URBC Taluka- Ankleshwar/Hasot , District- Bharuch.”

SUMMARY (SCHEDULE-B)

Sr.No Name of work Total Cost

“Providing, Supplying, Lowering, Laying & Jointing 350 mm & 450 mm Dia DI K-7

Pipeline And 406.4 mm Dia MS Pipeline from parvat Pond to Sunevkalla WTP,

SCHEDULE - B Floting Pontoon, Supply And Instllation of puming Machinery and Operation and

maintaiunance for 04 Year Under SZBT-2 Regional Water Supply Scheme based

URBC Taluka- Ankleshwar/Hasot , District- Bharuch.”

SCHEDULE - C Operation & Maintainance (For 04 Year)

Rebate on above tender (4) (if any)…………%

Net Considering Rebate 5= (3-4)

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

Name of Project :- “Providing, Supplying, Lowering, Laying & Jointing 350 mm & 450 mm Dia DI K-7 Pipeline And 406.4 mm Dia

MS Pipeline from parvat Pond to Sunevkalla WTP, Floting Pontoon, Supply And Instllation of puming Machinery and Operation

and maintaiunance for 04 Year Under SZBT-2 Regional Water Supply Scheme based URBC Taluka- Ankleshwar/Hasot , District-

Schedule B1 Civil Work

Sr. Rate in Rs.

Description unit Qty Amount

No. In figure In words

Providing and supplying D. I. K-7 grade pipes for following nominal bore diameter with

internal cement mortar lining including all taxes, insurance, transportation, freight Five Thousand Four

1 charges, octroi, inspection charges, loading, unloading, conveyance to departmental 3850.00 Rmt 5418 Hundred Eighteen

stores, stacking etc. Rupees

Three Thousand Eight

350 mm DI K-7 At Utraj HW 20.00 Rmt 3858 Hundred Fifty Eight

Manufacture, supply and delivery of Ductile Iron (D.I.) flange, socket-spigot bends, tees,

reducers and other specials conforming to BS-EN-545:1995 Class-A Series K12, suitable

for use with D.I. pipes as per IS:8329:1994, including all taxes, loading, unloading,

transportation, carting, stacking, insurance, inspection charges, octroi and all other

incidental expenses, with delivery to GWSSB stores or project sites anywhere in

Gujarat, complete.

Socket & Spigot Type

One Hundred Fifty One

For 350 & Above mm dia 2770.00 Kg 151

Providing and supplying ISI-marked Cast Iron Double Flanged (CI D/F) Sluice Valves

conforming to IS:14846 (latest edition), PN-1 class, complete with hand wheel

3 operation, including all taxes, insurance, transportation, freight, octroi, inspection

charges, loading, unloading, conveyance to departmental stores, stacking and all other

incidental costs, complete.

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

P.N.1 with hand wheel/cap operated (PD type short body)

For Sluice Valve

Fifty-Three Thousand

450 mm Dia (For Parvat To Sunevkalla) 2.00 No. 53384 Three Hundred Eighty

Thirty Thousand One

350 mm Dia (For Sunevkalla areator & Utraj Intake and CWS) 4.00 No. 30125 Hundred Twenty Five

Providing, supplying and fixing Cast Iron (C.I.) tamper-proof Air Valves with SS 304 float

and gunmetal nozzle of approved make and quality, of the specified class and diameter,

4 including all taxes, insurance, transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to departmental stores, stacking and all other

incidental expenses, complete.

Temper proof Air valves

Air Valve double Acting DS2

Eight Thousand Seven

100 mm dia. 9.00 No. 8748 Hundred Forty Eight

Excavation for pipeline trenches for water supply lines, sewerage lines, manholes and

related works, including shoring and strutting where required, maintaining the

5 specified line and gradient, providing necessary safety measures, stacking excavated

material, disposal or carriage within the required lead, site cleaning and all associated

operations, complete for all depths, lifts and soil strata as specified.

0.0 to 1.5 Mt Depth

a) In all sorts of soil and soft murrum (80% of Total Quantity of Excavation) 5274.40 Cum 89 Eighty Nine Rupees

One Hundred Thirty

b) In hard murrum, boulders incl. macadam road.(20% of Total Quantity of Excavation) 1318.60 Cum 135

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

Lowering, laying and jointing Cast Iron (C.I.) Socket & Spigot (S&S) spun pipes suitable

for Tyton joints and mortar-lined Ductile Iron (D.I.) pipes of various classes, along with

6 C.I./M.S. specials of specified diameters, in correct position, grade and alignment as

directed by the Engineer-in-Charge, including hydraulic testing and all associated

works, complete.

Two Hundred Sixty

450 mm Dia DI-K7 Pipe 3850.00 Rmt 265

One Hundred Eighty

350 mm Dia DI k-7 Pipe 20.00 Rmt 188

Clearing and grubbing of road land by manual means in light jungle areas, including Seventy-Nine

removal of rank vegetation, grass, bushes, shrubs, saplings and trees up to 300 mm Thousand Four

girth, uprooting and removal of existing tree stumps, and disposal of all unserviceable Hundred Forty Nine

materials, complete.( Total Length * 70%) Rupees

Erection of air valve riser by providing, installing and fixing new M.S. pipe of 6 mm

thickness and 3.2 m length, including all necessary fittings such as flanges of suitable

8 size, nuts, bolts and accessories, embedding the pipe in M15 grade RCC with a 100 mm

offset around the pipe, including required reinforcement steel and all associated works,

Temper proof Air valves

With Isolating Sluice Valve PN

Five Thousand Five

100 mm dia. 9.00 No. 5543 Hundred Forty Three

Lowering, laying and jointing in position following C.I. / D.F. Reflux valves, Butterfly

valves, Sluice valves and Air valves including cost of all labour, jointing material,

including nut, bolts and giving satisfactory hydraulic testing etc. complete (Rate for all

class of valves)

P.N.1 with hand wheel/cap operated (PD type short body)

For Sluice Valve

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

Two Thousand Seven

Hundred Sixty Rupees

One Thousand Seven

350 mm Dia 4.00 No. 1742 Hundred Forty-Two

Five Hundred Twenty

Construction of valves chambers in brick or bela stone masonry, locally available in C.

M. 1:6. Foundation concrete 150 mm thick in C. C. 1:4:8 of trap metal size 25 mm to

mm thick, inside cement plaster in C. M. 1:3 and cement pointing outside in C. M. 1:3

and top cover of precast RCC slab 100 mm thick (with key hole in two parts, each with

handles or MS Bar etc. complete as given size) Upto 1 Mt. depth from G. L. to pipe

invert level incl. complete civil works but excl. cost of excavation and refilling, with cast

in situ RCC slab in one single piece with fixing of CIMH Frame and cover (excl. cost of CI-

MH Frame and cover) with 23 mm thick brick masonry wall in C.M.1:6

Seven Thousand Three

0.9m L * 0.39m B * 1.0m H 6.00 No. 7343 Hundred Forty Three

Providing and casting in-situ RCC of Grade M20 (as per approved mix design or Table

of IS 456:2000 using weigh batching), with granite/quartzite/trap aggregate of 6 mm to

20 mm size, for structural works other than water-retaining structures, including

centering, shuttering, scaffolding, formwork, machine mixing, needle vibrator

compaction, curing and all incidental works up to 6 m depth or height, complete,

excluding the cost of reinforcement steel and neat finishing.

Five Thousand Five

Thrust Block 17.68 Cum 5520 Hundred Twenty

Supplying, cutting, bending, binding and placing in position reinforcement steel of all

diameters as per approved drawings, design and IS 2502 specifications, including the

cost of steel, binding wire, labour, handling and all incidental works for reservoirs and

structural works, complete, including lifts up to 6 m height or depth below ground

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

DO - Thermo Mechanically Treated (TMT) Bars Fe-415 Grade for all diameters. 0.71 MT. 73208 Thousand Two

Hundred Eight Rupees

Refilling pipeline trenches with approved excavated material, including layering,

13 ramming, watering and proper consolidation, along with disposal of surplus excavated 6321.00 Cum 22 Twenty-Two Rupees

material as directed by the Engineer-in-Charge within a lead of 3 km, complete.

Designing aesthetically and constructing room with positive / Negative suction.

Without gantry structure ( up to 3.60 M height). Minimum 15% opening for ventilation Fifteen Thousand

sould be provided. Panel room rolling shutter, door and windows of aluminium section Three Hundred One

and window grill of iron should be provided.plinth level of pump house should be Rupees and Seventy-

minimum 1.0 Mt. above G.L. Cost does not include foundation for pumping machinery. Two Paise Only

Clearing the shrubs, like akadas, weeds and other vegetables including depositing the Seventeen Rupees and

same outside etc. complete from Pond Water Surface And bed at parvat Village. Three Paisa

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

Name of Project :- “Providing, Supplying, Lowering, Laying & Jointing 350 mm & 450 mm Dia DI K-7 Pipeline And

mm Dia MS Pipeline from parvat Pond to Sunevkalla WTP, Floting Pontoon, Supply And Instllation of puming

Machinery and Operation and maintaiunance for 04 Year Under SZBT-2 Regional Water Supply Scheme based URBC

Taluka- Ankleshwar/Hasot , District- Bharuch.”

Schedule B.2.A – Electro Mechanical Work

Sr. Rate in Rs.

Description unit Qty Amount

No. In figure In words

[A] MECHANICAL EQUIPMENT

Supply, fabrication & erection of metallic floating Jetty / Pontoon for

pump sets with required capacity chain pulley block and gantry

girder structure including required materials like MS angles,

Rupees Five Lakh

channels, floats, GI / MS pipes, hardware, MS / Aluminum chequered

1 1 JOB 553500.00 Fifty-Three Thousand

plate with MS / GI safety railings etc. complete. Suitable for

Five Hundred Only

Installation of Three Phase Polder Pump Having Motor Rating 50 HP

Supply, fabrication & erection of metallic floating walkway / bridge

of following width made from MS angles, channels, sheets, drums,

Rupees Seventeen

2 floats, hardware, MS / Aluminum chequered plate with MS / GI 20 RMT 17000.00

safety railings etc. complete for approaching pontoon.

Metallic walkway 1.5 m wide (1.5*1=1.5 sq.mtr.)

Supply and install heavy duty through the weave polyurethane(PU)

covered fire hose with coupling made from 100% high tenacity

synthetic yarn circular woven and completely embedded in the PU

3 400 RMT 3881.25 Hundred Eighty-One

protected against mechanical damage, forming a single homogenous

and Twenty-Five

construction without the use of any glue or adhesive of any type,

resistance to abrasion, heat, oil, fuel, a wide range of chemicals,

weathering and ozone, working pressure 8 kg/cm2 and burst

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

pressure 20 kg/cm Fire Hose 200 mm dia.

Polder Pumpsets :

Providing submersible, Non clog type with required capapcity & head

as per IS 8034 suitable for water having upto 10000 PPM turbidity

with suitable submersible wet type, water cooled, squirrel cage

motor to IS 9283, working on three phase, 50 Hz +/-3%, 415V +/-

Rupees Three Lakh

Ninety-One Thousand

4 supply, 2900 RPM synchronize speed with 10 mtr copper conductor 4 Set 391431.00

Four Hundred Thirty-

flat cable from pump to starter panel with cable end terminations (4)

all supports, clamps, pipe fittings alongwith mechanical seal, bearing

bush, strainer etc. complete set & following M.O.C:

Casing CI, SS CF8M impeller, Bronze: wearing ring & Bearing bush, TC

mechanical seal, CS/S.S.bearing, S.S shaft with sleeve, SS strainer &

MS motor body. Duty Point:- 75 LPS x 27 m Head x 50 HP

Manufacture, Supply & Delivery of Electric Resistance Welded (Up to

400mm)/Submerged Arc Welded(Above 400mm) M.S.Pipe having

beveled ends plate or coil conforming to IS-3589-2001 or its latest

revision/ammendment for following thickness outside diameter at

GWSSB store or site anywhere in Gujarat State including all taxes, Rupees Four

insurance, transportation, freight charges, octroi, inspection charges, Thousand Three

loading, unloading conveyance to Departmental stores, stacking etc. Hundred Ninety-

all complete. (Rate for MS Pipe based on the ex. works price of HR Three Only

Coil as Rs.58500 per MT - withouth GST (Above 3.15 mm to 10 mm)

& Rs. 59000.00 per MT without GST (Above 10 mm) as onJan-23.(

WPI Index of H. R Coil of Dec-22 is 144) 406.4 mm dia. * 6.3mm

thickness MS Pipe

Lowering, laying, Jointing & welding in position to correct line & level

M.S. Pipe with outer gunniting & inside lining/Epoxy painting on

pedestal or chairs upon prepared formation or prepared bedding in

6 100 RMT 354.00 Hundred Fifty-Four

trenches the rates include conveyance from store to site of work

loading, unloading, joint plastering, hydrotesting etc.complete

mm dia. * 6.3mm thickness MS Pipe

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

Manufacture, Supply & Delivery of Electric Resistance Welded (Up to

400mm)/Submerged Arc Welded(Above 400mm) M.S.Pipe having

beveled ends plate or coil conforming to IS-3589-2001 or its latest

revision/ ammendment for following thickness outside diameter at

GWSSB store or site anywhere in Gujarat State including all taxes, Rupees Two

insurance, transportation, freight charges, octroi, inspection charges, Thousand Three

loading, unloading conveyance to Departmental stores, stacking etc. Hundred Thirty-Seven

all complete. (Rate for MS Pipe based on the ex. works price of HR Only

Coil as Rs.58500 per MT - withouth GST (Above 3.15 mm to 10 mm)

& Rs. 59000.00 per MT without GST (Above 10 mm) as onJan-23.(

WPI Index of H. R Coil of Dec-22 is 219.1 mm dia. * 6.3mm thickness

Lowering, laying, Jointing & welding in position to correct line & level

M.S. Pipe with outer gunniting & inside lining/Epoxy painting on

pedestal or chairs upon prepared formation or prepared bedding in Rupees Two Hundred

trenches the rates include conveyance from store to site of work Sixteen Only

loading, unloading, joint plastering, hydrotesting etc.complete

219.1 mm dia. * 6.3mm thickness MS Pipe

Providing and supplying ISI mark CI D/F Butterfly Valves as per

IS:13095 (Latest Edition) of following class and diameter including all

9 taxes, insurance, transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to departmental stores,

a. 200 mm dia. For delivery pipe, Butterfly valves IS 13095 with ISI Rupees Six Thousand

9.1 mark PN 1.6 4 No. 6858.00 Eight Hundred Fifty-

b. 400 mm dia. For Header Pipe, Butterfly valves IS 13095 with ISI Rupees Thirty-Five

9.2 mark PN 1.6 1 No. 35105.00 Thousand One

Hundred Five Only

SITC of CI Dual Plate Check Valve as per API-594/598 with lowering,

laying and jointing in position including cost of all labour, jointing

material, including nut bolts and giving satisfactory hydraulic testing

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

a. 200 mm dia. For delivery pipe, DPCV valves API-594/598, PN-1.0 Rupees Thirteen

Hundred Forty-Two

b. 400 mm dia. For Header Pipe, DPCV valves API-594/598, PN-1.0 Rupees Twenty-

10.2 1 No. 27011.00 Seven Thousand

Design, Supply, Installation, Testing, Commissioning of Bourdon Type

Pressure Gauge, ±1% accuracy, Direct bottom 1/2" NPT (M) process

connection, IP 67, Glycerine filled, SS304 Case with Bayonet Type

Bezel, SS316 L Bourdon Tube, SS 316 Movement material, Aluminium

11 5 No. 1412.00 Thousand Four

dial with black graduation on white background, Micro Zero

Hundred Twelve Only

adjustable pointer, neoprene gasket, Blow out disc, shatter proof

glass, SS tag plate etc as per IS 3624. 0-20 kg/cm2 of dial size

Flow Transmitter/ Converter ( Remote Field Mounted):

Microprocessor based, Modular design, 2 line LCD for indication of

actual flow rate, forward, reverse, sum totaliser display, ±0.5%

accuracy at 0.3 to 4 m/sec velocity, 4 to 20 mA with HART/Modbus

output, one scalable pulse, one status output, IP 67 protection, Die Rupees Two Lakh

12 cast aluminium/ polycarbonate/ SS316 with nticorrosive Paint/ PU 1 No. 211120.00 Eleven Thousand One

finish with glass window enclosure, Inbuilt EEPROM and Data Logger, Hundred Twenty Only

20 meters cable length for sensor to transmitter communication etc

alongwith wall mounted/ stand mounted cabinet.

Full Bore Electromagnetic Flow Meter (Regular Power Operated)- PN

Regular Power operated RTU on Flow Meter- Rupees Thirty-Three

As per the Scope of work, functional and Technical requirement, Thousand One

including all cable & accessories, Installation, testing and Hundred Ninety-Six

commissioning etc. as per details technical specification" Only

Supply, installation, testing & commissioning of flange ends

Expansion Bellow as per EJMA standards of overall length of

minimum 300 mm, designed for 15 mm axial compression and 5 mm

axial extension with tie rods etc. of following MOC & pressure

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

ratings. MOC: Bellows: SA 240 Gr. 304; Internal Sleeve: SA 240 Gr.

304; Weldends: IS 2062 Gr. B; Flanges: IS 2062 Gr. B (Drilling as per IS

1538 / IS 6392 ) & Limit Rods & Nuts: CS - IS

a. 200mm dia. For delivery pipe, Expansion Bellows PN-1.6 Rupees Six Thousand

14.1 4 No. 6576.00 Five Hundred

Seventy-Six Only

b. 400mm dia. For Header Pipe, Expansion Bellows PN-1.6 Rupees Seventeen

14.2 1 No. 17640.00 Thousand Six

Hundred Forty Only

Providing & Laying Reinforced Cement Concrete-M-15 in Thrust Rupees Eight

Block , Pipe & Valve Supports etc. with Tar steel, Black Trap Kapchi as Thousand Three

15 Coarse Aggreate for Raft, Grillage Footing with Necessary Centering 10 cu.m 8351.70 Hundred Fifty-One

Form work, Consolidating as per Directive in 1:2:4 Ratio etc. and Seventy Paise

compelete as per site requirement. RCC thrust block Only

Supply, Installation, Testing And Commissioning of CI Tempor proof

Flanged Air Valve with Isolation Sluice Valve as per IS 14845 PN-

&IS-14846 PN-1.6 respectively with SS304 float, gun metal Rupees Sixteen

nozzle, complete hardware's, bolts, nuts & washers, gaskets etc. Thousand Four

including all taxes, Insurance, Transportation, freight charges, Hundred Twenty-

Inspection charges, loading, unloading, conveyance to departmental Seven Only

stores, stacking, security etc. as per IS and Specification.

Size: 80 mm NB - Pn 1.6 (On Heder line )

Erection, Installation, Testing & Commissioning of suction, delivery,

By Pass & Header Piping with M.S. specials Flandges end like Rupees Ninety-Eight

flanges, eccentric - concentric Nozzles, Nut-Bolts, Y -tee connection, Only

G.I. specials etc. complete as per site requirement.

Supply, Install, Testing And Commissioning of ISI mark DI D/F Sluice

Valves as per IS:14846 (Latest Edition) of following class and

Rupees Forty-Eight

diameter including all taxes, insurance, Transportation, freight

18 1 No. 48980 Thousand Nine

charges, octroi, inspection charges, loading, unloading, conveyance

Hundred Eighty Only

to departmental stores, stacking etc. complete. Short Body Type,

Handwheel Size: 400 mm NB - PN

Electrical Section

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated,

stranded Aluminium conductor, galvanised steel flat strip / round

wire armoured, extruded PVC type ST2 sheathed, heavy duty cable

19 (to be laid on wall surface with necessary clamps / in existing cable

trench / cable trays / conduit / pipe sleeves at road crossing or floor

inclusive lugs & heavy duty double compression brass glands with

washers as per site requirement) conforming to IS:7098 (Part-1) &

IEC:60502 (Part-1) of following sizes:

3.5 C x 120 Sq. mm XLPE Aluminium Coductor (From GEB Pole to Rupees Four Hundred

LVDB Panel, MCC Panel) Twenty-Three Only

3C X 95 mm2 XLPE Al Conductor (MCC Panel to Motor) Rupees Three

3C X 4 mm2 XLPE Al Conductor Rupees Sixty-One

INTERNAL WIRING

SITC of Mains & outlet points wiring with 1.1 kV grade FRLS PVC

insulated ISI marked flexible stranded copper conductor wires with

medium class min. 25mm. dia. Rigid PVC pipe and accessories to be

erected concealed in / to be run on surface / wall / ceiling with

following sizes as mentioned below. The unit rate wirings shall be

Rupees Eighty-Two

20 with connector, PVC junction box, wires, holder, ceiling rose, angle 60 mtr 82.00

holder, switch, sockets, switch board, brass chromium / cadmium

plated machine screws, phase and neutral wires, green Earth

continuity wires etc. as required to complete wiring from LDB panel

to the final outlet termination points. The wiring shall be as per

IS:732, IS:4648 and as per tender specification / IS.

(a) SITC of Mains wiring with 3 wire 1.5 sq.mm.

SITC of Point wiring for Light / fan / Bell / Primary Point with 2nos.

1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI marked Rupees Three

21 1.1 kv grade FRLS PVC insulated multistrand copper wires , pipe to be 6 Nos 351.00 Hundred Fifty-One

erected concealed in flushed on wall / ceiling, complete with 6A Only

Tissino Type ISI marked flush type switch / bell push & accessories

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

erected on metal / PVC Box covered with 3 mm thick PC

(Polycarbonate) / Acrylic sheet with necessary lamp holder / ceiling

Rose / H. D. connector as directed with medium class Rigid PVC pipe

Supply, installation, testing and commissioning LV Distribution Board

(LVDB) totally enclosed, dust & vermin proof, indoor type, fabricated

from CRCA sheet steel with minimum thickness of 3 mm for base

frame / channel / gland plates, 2.0 mm for load bearing members /

doors & 1.6 mm for internal partitions, minimum degree of

protection - IP 52 as per IS: 2147, suitable for operation on 3-Phase,

4 Wire, 415 V, 50 Hz, Neutral effectively grounded, with

instrumentation compartments accomodating meters, aux /

protective relays, LED type indicating lamps & control MCBs as per

IS: 13947, current & voltage transformers as per IS: 2705, air

insulated electrolitic grade Aluminum / Copper bus bar for three

phase & neutral system, GI earth bus for entire length, power /

control wiring using 1100 V grade, FRLS insulated copper conductor

wires conforming to IS: 694 & 8130, equipment fittings, horizontally

running busbar compartment height of minimum 300 mm, incoming

& ougoing cable connections for 1100 V grade, Aluminium / Copper

conductor XLPE / PVC insulated & PVC sheathed armoured cable.

LVDB shall have required incomming / bus coupler / outgoing

modules of following type & ratings.

above 80 A, upto & including 250 A, 3 & 4 Pole, Air Break Fixed

MCCB conforms to IS/ IEC 60947-2 with trip free mechanism, current

limiting type with Thermal Magnetic/ Microprocessor release (O / C,

S / C & E / F) with adjustable settings & having minimum 2NO+2NC Rupees Forty-Three

potential free auxiliary contacts with all necessary Electro- Thousand One

Mechanical protections & interlocks etc. MCCB module, when used Hundred Eighty-

as Outgoing(s), shall have enclosure dimensions- 500 (H) x 600 (W) x Three Only

600 (D) & following technical features: 4 Pole, MCCB with Breaking

Capacity of Icu=50 KA at 415V (Ics =100% of Icu), Microprocessor

release (MCC Panel)

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

Above 16 A, upto & including 80 A, 3 & 4 Pole, Air Break Fixed MCCB

conforms to IS/ IEC 60947-2 with trip free mechanism, current

limiting type with Thermal Magnetic / Microprocessor release (O / C,

S / C & E / F) with adjustable settings & having minimum 2NO+2NC

potential free auxiliary contacts with all necessary Electro- Rupees Thirty-Four

Mechanical protections & interlocks etc. MCCB module, when used Thousand Three

as Hundred Fifty-Two

Outgoing(s), shall have enclosure dimensions- 300(H) x 500(W) x 600 Only

(D) & following technical features:

4 Pole, MCCB with Breaking Capacity of Icu=50 KA at 415V (Ics

Icu), Microprocessor release ( For Lighting, miscellaneous load)

SITC of LV MCC Panel totally enclosed, dust & bermin proof, indoor

type, minimum degree of protection - IP 52 as per IS:

operation on 3-Phase, 4 Wire, 415V, 50Hz, Neutral effectively

grounded, with instrumentation compartments accomodating LED

type indicating

lamps, control contactors as per IS: 13947, CT of accuracy class- I as

per IS: 2705, relays, meters & control MCBs, air insulated electrolitic

grade Aluminum bus bar for three phase & neutral system with

incomming breaker- microprocessor based Air Circuit Breakers

Rupees One Lakh

(electrically operated drawout type)/ air break fixed type MCCB with

trip free mechanism, current limiting type as per IS: 8828, Motor

23 1 Nos. 199321.00 Thousand Three

Contractor (as per type -2 coordination), Overload Relay with built-in

Hundred Twenty-One

single phasing prevention feature & auxiliary feeders as per SLD

drawings, momentary contact type push buttons, equipment fittings,

bus bars, cable boxes, cable gland, incoming & ougoing cable

connection for 1100V grade, Aluminium/ Copper conductor XLPE /

PVC insulated & PVC sheathed armoured cable, 10% spare terminals,

power wiring using 1100V grade, FRLS insulated copper conductor

wires conforming to IS: 694 & 8130, cable compartments / alleys of

minimum 300 mm size, GI / Al earth bus bar for entire length. MCC

shall be fabricated from cold rolled, coled annealed (CRCA) sheet

steel & minimum thickness of various members shall be as

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

follows:Base Frame / Channel / Gland Plate: 3 mm, Load Bearing

Members / Doors: 2 mm and Internal Partitions: 1.6 mm.

Microprocessor based Soft Starter with built-in by pass

contactor,Semiconductor Fuses, Harmonic Filters, cast resin type CT,

Digital MFM, Analogue Ammeter & minimum 10 Channel

Temperature Scanner with RS 485 communication port. Auto

Transformer Starter with MCCB, Contactor, O/L relay, cast resin type

CT, Digital MFM, Analogue Ammeter, SPP, Timer etc.Dim- 2200 x

Cable Terminations / Jointing Kits for 1.1kV grade PVC/ XLPE Cable

Providing & fitting heat shrink cable termination / jointing kits for

1.1kV grade PVC/ XLPE insulated cable including necessary earth

24 connectivity connection, material & consummables making the

termination/ joint complete ensuring the joint resistance is within

the permissble limit as per IS, of following types & sizes: Outdoor

End Termination Kit

b. For 70 to 150 Sq.mm., Core- 3C/ 3.5C / 4C, Rupees Nine Hundred

Seventy-Two Only

Cable Trays & Accessories:Supply & laying GI ladder type cable trays

with side channels of size - 75 x 15 x 15 mm / 100 x 15 x 15 mm &

rungs of size - 35 x15 x 15 mm spaced at 250 mm apart, fabricated

from 2 mm thick sheet steel in standard length of 2.5 meter, duly hot Rupees Three

25 dipped galvanized after fabrication as per IS 2629-1989/ IS 4759- 50 Mtr 336.00 Hundred Thirty-Six

1984 including accessories such as coupler plates/ fish plates, bends, Only

tees, reducers, elbows, covers and electro-galvanized hardware etc,

erected on existing support as per specification and instruction of

Engineer-in-charge.150(W) x 35(H) x 2.0 mm Thick

Providing and erecting Approved make Ceiling fan with double ball

bearing ISI mark with condenser A.C. 230V.50 c/s.1200 mm. sweep

complete, canopy and 30 cms. down rod erected on existing hook or

26 3 Nos. 1700.00 Thousand Seven

clamp with 24/0.2 , 3 core flexible wire with earthing. Contractor has

to submit lighting layout and get it approved from competent

authority before execution of this work

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

[Make shall be approved by Engineer in charge]

LIGHTING DISTRIBUTION BOARD:

Providing and erecting LIGHTING Distribution Board made of sheet

steel powder coated, surface mounted fitted with busbar,neutral

link, earth busbar and DIN rail, conforming to IS 13032 and BS

5486/1986 comprising one Incomer with EL+MCCB and required Rupees Five

27 outgoings with MCBs as follows; 1 Nos. 5206.00 Thousand Two

(a) 1 No. incomer with 63A FP EL+MCCB (O/L+S/C+E/F) for lighting & Hundred Six Only

inductive load having 25kA breaking capacity & conforming to IS/IEC

(c) 8 Nos Outgoing each with 6-32A DP MCB for 230V aux loads

having breaking capacity 10 KA & confirming to IS/IEC 60898-2:2003.

Supplying & erecting single phase approved make industrial exhaust

fan suitable for heavy duty ring mounted low noise operation with all

fittings & accessories having following dia size and maximum speed

28 1 Nos. 4611.00 Thousand Six

in RPM -450 mm dia 1400 RPM - Cat-II. Contractor has to submit

Hundred Eleven Only

lighting layout and get it approved from competent authority before

execution of this work

Providing and erecting heavy duty flood light integral luminarie

comprises die cast aluminium body with heat resistant toughned

front glass,silicon rubber gasket anodised reflector hot deep powder Rupees Three

29 coated cradle clamp with suitable size of necessary built in control 4 Nos. 3900.00 Thousand Nine

gear complete with lamp. Contractor has to submit lighting layout Hundred Only

and get it approved from competent authority before execution of

this work.with 150 watt LED Highbay

SITC of Maintenance free chemical earthing with earthpit of

minimum bore size dia. 225mm Safe Earthing Electrode consisting

Pipe-in-Pipe Technology as per IS-3043:1987 /Tech spec. made of

30 corrosion free Hot dip Galvanised (min 150 Microns) Pipes having 6 Set 8288.00

Hundred Eighty-Eight

Outer pipe dia of 76 mm , Inner corrosion free Hot dip galvanised

(80 to 100 micron) pipe dia of 26 mm with copper flat strip type

connection terminal 14mm dia with constant ohmic value

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

surrounded by highly conductive corrosion resistant chemical

compound with high charge dissipation suitable for electrical

installation & 3Mtr. length of Pipe with two nos. 25Kg. bag of Back

filling compound.

NOTE: Earthing Resistance value & date shall be painted on the

Supply and laying of Synthetic Insulating Mat of Class - A of min. Rupees One

31 thickness 2mm as per IS:15652 and with good electrical insulation 5 Sq.mtr. 1,017.00 Thousand Seventeen

property for 1.1KV/3.3KV as per site requirement. (For LT Panel) Only

Supply, laying and erection of 75 mm ID approved make Double

Walled Corrugated pipes (DWC) of polyethelene (confirming to IS-

14930 II) with necessary connecting accessoies of same material at Rupees One Hundred

required depth for laying of cable below ground / road surface for Forty-Four Only

enclosing cable and back filling the same to make ground as per

original. (LT cable etc)

Providing and Approved make Junction Box compression moulded

from SMC(thermoset Plastic) Verticle sliding cover having locking

Rupees Nine Hundred

33 with square head stud loop in/out in built terminal suitable for four 4 Nos 979.00

Seventy-Nine Only

core cable water proof of IP 54 Protected with clamp or bolt-nut &

earth bolt of following size 327 mm * 254 mm * 120 mm

Supply, laying and erection of 25mm(w) x 3mm(T) etc. sizes as

required, HOT dip galvanized GI Strip including supply & fixing using

Rupees Seventy-

34 GI spacers, saddles when laid inside the building and inclusive of 150 Kg. 77.00

excavation & refilling of earth when laid outside the building &

interconnection with earth pit & all electro-mechanical equipment

Supply, laying and erection of 25mm(w) x 3mm(T) etc. sizes Copper

Strip including supply & fixing of bolts, saddles when laid inside the

building and inclusive of excavation & refilling of earth when laid

outside the building & interconnection with earth pit & PLC Panel

35 50 Kg. 787.00 Hundred Eighty-

(25X3 Cu. Strip, 0.761 Kg/m, 0.761 x 50 mtr.=38.05Kg.)

Copper Bolt,Nuts ,Washers shall be used for Connecting Earth

electrode to individual eqp. Bitumen shall be used at the place of

joint/welding. (For PLC Panel to Earthing)

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

Providing and Fixing of Existing Pontoon with Galvenized Steel Wire Rupees Two Hundred

36 Ropes with 6*36/37 Construction Plow Steel with Galvenised Fiber 100 mtr. 297.46 Ninety-Seven and

Core as per IS 2266. 18 mm Dia Forty-Six Paise Only

Heavy Duty D Type Clamp for Wire Rope Fixing 18 mm

37 230 No 15.00 Rupees Fifteen Only

SAFETY ACCESSORIES

SITC of following safety accessories complete with necessary fixing

brackets, other accessories and tools etc. as required to complete

38 the job. 2 Nos. 8,586.00

Hundred Eighty-Six

Supply & Erecting carbon dioxide (CO2) fire extinguisher of 6.5kg

capacity with necessary clamps made from 50 x 6 mm M.S. Flat with

nut & bolts grouted in wall complete.

Supplying of standard first AID box with antiseptic cream, medicine

for use on wounds due burn, crepe bandage, guage bandage,

Rupees Two Hundred

39 medicated ready to use bandage (Band-aid) adhesive tape for 2 Nos. 297.00

Ninety-Seven Only

medicinal user, scissors, antiseptic solution (Savlon or similar) etc.

(All above contents shall be of standard makes)

Supply & fixing of printed instruction (First Aid) Chart both in English

Rupees One Hundred

40 and Gujarati and duly framed with front glasses, for treatment of 1 Nos. 129.00

Twenty-Nine Only

person suffering from electric shock.

Supplying & fixing of floor mounting stand for keeping four nos. of

FIRE buckets comprising 1500 mm in length, 900 mm height frame

41 made out of 30mm X30 mm X 4 mm angle iron with cross supports 1 Nos. 1,781.00

Hundred Eighty-One

for legs, welded with 4 hooks and duly painted with one coat of red

lead and two coats of approved enamelled silver paint.

LED LIGHT FIXTURES & LIGHTING:

SITC of Indoor wall mounting 20Watt or up to 25% higher wattage

LED 4 feet Tube Light indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB, with housing used as a Rupees Two Hundred

heat sink shall be made of thick sheet Steel conforming to IS: Ninety-Three Only

513/CRCA polyester powder coated and high U.V. & corrosion

resistance with diffuser and/or Polycarbonate optics with company

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

CCT 4000 K to 6500K, Uniformity ratio >0.7,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

(Each fitting required LM-79 & LM-80 Certificates)

Name of Project :- “Providing, Supplying, Lowering, Laying & Jointing 350 mm & 450 mm Dia DI K-7 Pipeline And

mm Dia MS Pipeline from parvat Pond to Sunevkalla WTP, Floting Pontoon, Supply And Instllation of puming Machinery

and Operation and maintaiunance for 04 Year Under SZBT-2 Regional Water Supply Scheme based URBC Taluka-

Ankleshwar/Hasot , District- Bharuch.”

Schedule B.2.A – Electro Mechanical Work

Sr. Rate in Rs.

Description unit Qty Amount

No. In figure In words

[A] MECHANICAL EQUIPMENT

1 Polder Pumpsets :

Providing submersible, Non clog type with required capapcity & head as per

IS 8034 suitable for water having upto 10000 PPM turbidity

Rupees Three Lakh

with suitable submersible wet type, water cooled, squirrel cage motor to IS

Ninety One Thousand

9283, working on three phase, 50 Hz +/-3%, 415V +/- 10%, AC 4 Set 391431.00

Four Hundred Thirty

supply, 2900 RPM synchronize speed with 10 mtr copper conductor flat

cable from pump to starter panel with cable end terminations (4)

all supports, clamps, pipe fittings alongwith mechanical seal, bearing bush,

strainer etc. complete set & following M.O.C:

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

Casing CI, SS CF8M impeller, Bronze: wearing ring & Bearing bush, TC

mechanical seal, CS/S.S.bearing, S.S shaft with sleeve, SS strainer & MS

motor body. Duty Point:- 48 LPS x 47 m Head x 50 HP.

2 Manufacture, Supply & Delivery of Electric Resistance Welded (Up to

400mm)/Submerged Arc Welded(Above 400mm) M.S.Pipe having beveled

ends plate or coil conforming to IS-3589-2001 or its latest revision/

ammendment for following thickness outside diameter at GWSSB store or

site anywhere in Gujarat State including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading, unloading conveyance 100 RMT 1285.00

Hundred Eighty Five

to Departmental stores, stacking etc. all complete. (Rate for MS Pipe based

on the ex. works price of HR Coil as Rs.58500 per MT - withouth GST (Above

3.15 mm to 10 mm) & Rs. 59000.00 per MT without GST (Above 10 mm) as

onJan-23.( WPI Index of H. R Coil of Dec-22 is 144) 168.3 mm dia. * 4.5mm

thickness MS Pipe

3 Lowering, laying, Jointing & welding in position to correct line & level M.S.

Pipe with outer gunniting & inside lining/Epoxy painting on pedestal or

chairs upon prepared formation or prepared bedding in trenches the rates Rupees One Hundred

include conveyance from store to site of work loading, unloading, joint Eighty Only

plastering, hydrotesting etc.complete 168.3 mm dia. *4.5mm thickness

4 Manufacture, Supply & Delivery of Electric Resistance Welded (Up to

400mm)/Submerged Arc Welded(Above 400mm) M.S.Pipe having beveled

ends plate or coil conforming to IS-3589-2001 or its latest revision/

ammendment for following thickness outside diameter at GWSSB store or

site anywhere in Gujarat State including all taxes, insurance, transportation, Rupees Three

freight charges, octroi, inspection charges, loading, unloading conveyance 100 RMT 3106.00 Thousand One

to Departmental stores, stacking etc. all complete. (Rate for MS Pipe based Hundred Six Only

on the ex. works price of HR Coil as Rs.58500 per MT - withouth GST (Above

3.15 mm to 10 mm) & Rs. 59000.00 per MT without GST (Above 10 mm) as

onJan-23.( WPI Index of H. R Coil of Dec-22 is 144) 323.9 mm dia. * 5.6 mm

thickness MS Pipe

5 Lowering, laying, Jointing & welding in position to correct line & level M.S.

Rupees Two Hundred

Pipe with outer gunniting & inside lining/Epoxy painting on pedestal or 100 RMT 297.00

Ninety Seven Only

chairs upon prepared formation or prepared bedding in trenches the rates

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

include conveyance from store to site of work loading, unloading, joint

plastering, hydrotesting etc.complete 323.9 mm dia. * 5.6 mm thickness

6 Providing and supplying & erecting ISI mark CI D/F Butterfly Valves as per

IS:13095 (Latest Edition) of following class and diameter including all taxes,

insurance, transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to departmental stores, stacking etc.

6.1 a. 150 mm dia. For delivery pipe, Butterfly valves IS 13095 with ISI mark PN Rupees Four

1.6 Thousand Eight

Hundred Fifty Three

6.2 b. 300 mm dia. For Header Pipe, Butterfly valves IS 13095 with ISI mark PN Rupees Eighteen

1.6 1 No. 18650.00 Thousand Six

Hundred Fifty Only

7 SITC of CI Dual Plate Check Valve as per API-594/598 with lowering, laying

and jointing in position including cost of all labour, jointing material,

including nut bolts and giving satisfactory hydraulic testing etc. complete.

7.1 a. 150mm dia. For delivery pipe, DPCV valves API-594/598, PN-1.0 Rupees Nine

4 No. 9210.00 Thousand Two

Hundred Ten Only

7.2 b. 300mm dia. For Header Pipe, DPCV valves API-594/598, PN-1.0 Rupees Thirty Six

Hundred Ninety One

8 Supply, Installation, Testing And Commissioning of CI Tempor proof Flanged

Air Valve with Isolation Sluice Valve as per IS 14845 PN- 1.6 &IS-14846 PN-

1.6 respectively with SS304 float, gun metal nozzle, complete Rupees Sixteen

hardware's, bolts, nuts & washers, gaskets etc. including all taxes, Thousand Four

Insurance, Transportation, freight charges, Inspection charges, loading, Hundred Twenty

unloading, conveyance to departmental stores, stacking, security etc. as per Seven Only

IS and Specification.

Size: 80 mm NB - Pn 1.6 (On Header line )

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

9 Design, Supply, Installation, Testing, Commissioning of Bourdon Type

Pressure Gauge, ±1% accuracy, Direct bottom 1/2" NPT (M) process

connection, IP 67, Glycerine filled, SS304 Case with Bayonet Type Bezel, Rupees One

SS316 L Bourdon Tube, SS 316 Movement material, Aluminium dial with 5 No. 1412.00 Thousand Four

black graduation on white background, Micro Zero adjustable pointer, Hundred Twelve Only

neoprene gasket, Blow out disc, shatter proof glass, SS tag plate etc as per

IS 3624. 0-20 kg/cm2 of dial size 150mm

10 Flow Transmitter/ Converter ( Remote Field Mounted): Microprocessor

based, Modular design, 2 line LCD for indication of actual flow rate,

forward, reverse, sum totaliser display, ±0.5% accuracy at 0.3 to 4 m/sec

velocity, 4 to 20 mA with HART/Modbus output, one scalable pulse, one Rupees One Lakh

status output, IP 67 protection, Die cast aluminium/ polycarbonate/ SS316 Thirty Four Thousand

with nticorrosive Paint/ PU finish with glass window enclosure, Inbuilt Four Hundred Twenty

EEPROM and Data Logger, 20 meters cable length for sensor to transmitter Two Only

communication etc alongwith wall mounted/ stand mounted cabinet.Full

Bore Electromagnetic Flow Meter (Regular Power Operated)- PN

11 Regular Power operated RTU on Flow Meter- Rupees Thirty Three

As per the Scope of work, functional and Technical requirement, including Thousand One

all cable & accessories, Installation, testing and commissioning etc. as per Hundred Ninety Six

details technical specification" Only

12 Supply, installation, testing & commissioning of flange ends Expansion

Bellow as per EJMA standards of overall length of minimum 300 mm,

designed for 15 mm axial compression and 5 mm axial extension with tie

rods etc. of following MOC & pressure ratings. MOC: Bellows: SA 240 Gr.

304; Internal Sleeve: SA 240 Gr. 304; Weldends: IS 2062 Gr. B; Flanges: IS

2062 Gr. B (Drilling as per IS 1538 / IS 6392 ) & Limit Rods & Nuts: CS - IS

12.1 a. 150mm dia. For delivery pipe, Expansion Bellows PN-1.6 Rupees Four

Hundred Ninety Six

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

12.2 b. 300 mm dia. For Header Pipe, Expansion Bellows PN-1.6 Rupees Ten

1 No. 10800.00 Thousand Eight

13 Providing & Laying Reinforced Cement Concrete-M-15 in Thrust Block , Pipe Rupees Eight

& Valve Supports etc. with Tar steel, Black Trap Kapchi as Coarse Aggreate Thousand Three

for Raft, Grillage Footing with Necessary Centering Form work, 10 cu.m 8351.70 Hundred Fifty One

Consolidating as per Directive in 1:2:4 Ratio etc. compelete as per site and Seventy Paise

requirement. RCC thrust block Only

14 Single Girder HOT Crane - Supply, installation, testing & commissioning

Rupees Two Lakh

single girder type HOT crane with geared travelling trolly with seven meter

Twelve Thousand

lift completewith manually operated chain pulley block, long travel rail 1 No. 212250.00

Two Hundred Fifty

track (40 mm sq. bar), moving or cross girder, brake, safety device etc. &

tested to 50% overload. 2 T, Span and long travel as per site requirement

15 Erection, Installation, Testing & Commissioning of suction, delivery, By Pass

& Header Piping with M.S. specials Flandges end like flanges, eccentric - Rupees Ninety Eight

concentric Nozzles, Nut-Bolts, Y -tee connection, G.I. specials, I Section Only

structure etc. complete as per site requirement.

[B] ELECTRICAL EQUIPMENTS

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated,

stranded Aluminium conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on

wall surface with necessary clamps / in existing cable trench / cable trays /

conduit / pipe sleeves at road crossing or floor inclusive lugs & heavy duty

double compression brass glands with washers as per site requirement)

conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) of following sizes:

16.1 3.5 C x 150 Sq. mm XLPE Aluminium Coductor (From GEB Pole to LVDB Rupees Five Hundred

Panel) Three Only

16.2 3.5 C x 120 Sq. mm XLPE Aluminium Coductor (From LVDB panel MCC Rupees Four Hundred

Panel) 50 Mtr 423.00

Twenty Three Only

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

16.3 3C X 70 mm2 XLPE Al Conductor (MCC Panel to Motor) Rupees Two Hundred

Eighty Seven Only

16.4 3C X 4 mm2 XLPE Al Conductor Rupees Sixty One

Supply, installation, testing and commissioning LV Distribution Board (LVDB)

totally enclosed, dust & vermin proof, indoor type, fabricated from CRCA

sheet steel with minimum thickness of 3 mm for base frame / channel /

gland plates, 2.0 mm for load bearing members / doors & 1.6 mm for

internal partitions, minimum degree of protection - IP 52 as per IS:

suitable for operation on 3-Phase, 4 Wire, 415 V, 50 Hz, Neutral effectively

grounded, with instrumentation compartments accomodating meters, aux /

protective relays, LED type indicating lamps & control MCBs as per IS:

13947, current & voltage transformers as per IS: 2705, air insulated

electrolitic grade Aluminum / Copper bus bar for three phase & neutral

system, GI earth bus for entire length, power / control wiring using 1100 V

grade, FRLS insulated copper conductor wires conforming to IS: 694 &

equipment fittings, horizontally running busbar compartment height of

minimum 300 mm, incoming & ougoing cable connections for 1100 V grade,

Aluminium / Copper conductor XLPE / PVC insulated & PVC sheathed

armoured cable. LVDB shall have required incomming / bus coupler /

outgoing modules of following type & ratings.

18 above 80 A, upto & including 250 A, 3 & 4 Pole, Air Break Fixed MCCB

conforms to IS/ IEC 60947-2 with trip free mechanism, current limiting type

with Thermal Magnetic/ Microprocessor release (O / C, S / C & E / F) with

Rupees Forty Three

adjustable settings & having minimum 2NO+2NC potential free auxiliary

contacts with all necessary Electro-Mechanical protections & interlocks etc. 1 Nos. 43183.00

Hundred Eighty Three

MCCB module, when used as Outgoing(s), shall have enclosure dimensions-

500 (H) x 600 (W) x 600 (D) & following technical features: 4 Pole, MCCB

with Breaking Capacity of Icu=50 KA at 415V (Ics =100% of Icu),

Microprocessor release

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

19 SITC of LV MCC Panel totally enclosed, dust & bermin proof, indoor type,

minimum degree of protection - IP 52 as per IS: 2147, operation on 3-Phase,

4 Wire, 415V, 50Hz, Neutral effectively grounded, with instrumentation

compartments accomodating LED type indicating

lamps, control contactors as per IS: 13947, CT of accuracy class- I as per IS:

2705, relays, meters & control MCBs, air insulated electrolitic grade

Aluminum bus bar for three phase & neutral system with incomming

breaker- microprocessor based Air Circuit Breakers (electrically operated

drawout type)/ air break fixed type MCCB with trip free mechanism, current

limiting type as per IS: 8828, Motor Contractor (as per type -2

coordination), Overload Relay with built-in single phasing prevention

feature & auxiliary feeders as per SLD drawings, momentary contact type

Rupees One Lakh

push buttons, equipment fittings, bus bars, cable boxes, cable gland,

incoming & ougoing cable connection for 1100V grade, Aluminium/ Copper

1 Nos. 199321.00 Thousand Three

conductor XLPE / PVC insulated & PVC sheathed armoured cable, 10% spare

Hundred Twenty One

terminals, power wiring using 1100V grade, FRLS insulated copper

conductor wires conforming to IS: 694 & 8130, cable compartments / alleys

minimum 300 mm size, GI / Al earth bus bar for entire length. MCC shall be

fabricated from cold rolled, coled annealed (CRCA) sheet steel & minimum

thickness of various members shall be as follows:Base Frame / Channel /

Gland Plate: 3 mm, Load Bearing Members / Doors: 2 mm and Internal

Partitions: 1.6 mm. Microprocessor based Soft Starter with built-in by pass

contactor,Semiconductor Fuses, Harmonic Filters, cast resin type CT, Digital

MFM, Analogue Ammeter & minimum 10 Channel Temperature Scanner

with RS 485 communication port. Auto Transformer Starter with MCCB,

Contactor, O/L relay, cast resin type CT, Digital MFM, Analogue Ammeter,

SPP, Timer etc.Dim- 2200 x 600 x 2175, 37 KW (2W+2S)

20 Cable Terminations / Jointing Kits for 1.1kV grade PVC/ XLPE Cable

Providing & fitting heat shrink cable termination / jointing kits for 1.1kV

grade PVC/ XLPE insulated cable including necessary earth connectivity

connection, material & consummables making the termination/ joint

complete ensuring the joint resistance is within the permissble limit as per

IS, of following types & sizes: Outdoor End Termination Kit

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

20.1 For 70 to 150 Sq.mm., Core- 3C/ 3.5C / 4C, Rupees Nine Hundred

Seventy Two Only

21 Cable Trays & Accessories:Supply & laying GI ladder type cable trays with

side channels of size - 75 x 15 x 15 mm / 100 x 15 x 15 mm & rungs of size -

35 x15 x 15 mm spaced at 250 mm apart, fabricated from 2 mm thick sheet

steel in standard length of 2.5 meter, duly hot dipped galvanized after Rupees Three

fabrication as per IS 2629-1989/ IS 4759-1984 including accessories such as 30 Mtr 336.00 Hundred Thirty Six

coupler plates/ fish plates, bends, tees, reducers, elbows, covers and Only

electro-galvanized hardware etc, erected on existing support as per

specification and instruction of Engineer-in-charge.150(W) x 35(H) x 2.0 mm

22 LIGHTING DISTRIBUTION BOARD:

Providing and erecting LIGHTING Distribution Board made of sheet steel

powder coated, surface mounted fitted with busbar,neutral link, earth

busbar and DIN rail, conforming to IS 13032 and BS 5486/1986 comprising

one Incomer with EL+MCCB and required outgoings with MCBs as follows;

1 Nos. 5206.00 Thousand Two

(a) 1 No. incomer with 63A FP EL+MCCB (O/L+S/C+E/F) for lighting &

Hundred Six Only

inductive load having 25kA breaking capacity & conforming to IS/IEC 60898-

(c) 8 Nos Outgoing each with 6-32A DP MCB for 230V aux loads having

breaking capacity 10 KA & confirming to IS/IEC 60898-2:2003.

23 SITC of Maintenance free chemical earthing with earthpit of minimum bore

size dia. 225mm Safe Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS-3043:1987 /Tech spec. made of corrosion free Hot dip Galvanised

(min 150 Microns) Pipes having Outer pipe dia of 76 mm , Inner corrosion

free Hot dip galvanised (80 to 100 micron) pipe dia of 26 mm with copper

flat strip type connection terminal 14mm dia with constant ohmic value 5 Set 8,288.00

Hundred Eighty Eight

surrounded by highly conductive corrosion resistant chemical compound

with high charge dissipation suitable for electrical installation & 3Mtr.

length of Pipe with two nos. 25Kg. bag of Back filling compound.

NOTE: Earthing Resistance value & date shall be painted on the chamber

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

24 Supply, laying and erection of 25mm(w) x 3mm(T) etc. sizes Copper Strip

including supply & fixing of bolts, saddles when laid inside the building and

inclusive of excavation & refilling of earth when laid outside the building &

interconnection with earth pit & PLC Panel (25X3 Cu. Strip, 0.761 Kg/m,

50 Kg. 787.00 Hundred Eighty

Copper Bolt,Nuts ,Washers shall be used for Connecting Earth electrode to

individual eqp. Bitumen shall be used at the place of joint/welding. (For PLC

Panel to Earthing)

25 Supply and laying of Synthetic Insulating Mat of Class - A of min. thickness Rupees One

2mm as per IS:15652 and with good electrical insulation property for 5 Sq.mtr. 1,017.00 Thousand Seventeen

1.1KV/3.3KV as per site requirement. (For LT Panel) Only

26 Supply, laying and erection of 75 mm ID approved make Double Walled

Corrugated pipes (DWC) of polyethelene (confirming to IS-14930 II) with

Rupees One Hundred

necessary connecting accessoies of same material at required depth for 80 Mtr 144.00

Forty Four Only

laying of cable below ground / road surface for enclosing cable and back

filling the same to make ground as per original. (LT cable etc)

27 Supply, laying and erection of 25mm(w) x 3mm(T) etc. sizes as required,

HOT dip galvanized GI Strip including supply & fixing using GI spacers,

saddles when laid inside the building and inclusive of excavation & refilling 150 Kg. 77.00

of earth when laid outside the building & interconnection with earth pit &

all electro-mechanical equipment

28 SAFETY ACCESSORIESSITC of following safety accessories complete with

necessary fixing brackets, other accessories and tools etc. as required to

complete the job.Supply & Erecting carbon dioxide (CO2) fire extinguisher 2 Nos. 8,586.00

Hundred Eighty Six

of 6.5kg capacity with necessary clamps made from 50 x 6 mm M.S. Flat

with nut & bolts grouted in wall complete.

29 Supplying of standard first AID box with antiseptic cream, medicine for use

on wounds due burn, crepe bandage, guage bandage, medicated ready to

Rupees Two Hundred

use bandage (Band-aid) adhesive tape for medicinal user, scissors, 2 Nos. 297.00

Ninety Seven Only

antiseptic solution (Savlon or similar) etc. (All above contents shall be of

standard makes)

30 Supply & fixing of printed instruction (First Aid) Chart both in English and

Rupees One Hundred

Gujarati and duly framed with front glasses, for treatment of person 1 Nos. 129.00

Twenty Nine Only

suffering from electric shock.

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

31 Supplying & fixing of floor mounting stand for keeping four nos. of FIRE

buckets comprising 1500 mm in length, 900 mm height frame made out of

30mm X30 mm X 4 mm angle iron with cross supports for legs, welded with 1 Nos. 1,781.00

Hundred Eighty One

4 hooks and duly painted with one coat of red lead and two coats of

approved enamelled silver paint.

Deputy Executive Engineer Deputy Executive Engineer Executive Engineer Executive Engineer

P. H.S.Sub Div, G.W.S.S.B P. H. Mech Sub Div, G.W.S.S.B P. H. Mech Dn., G.W.S.S.B P. H. Works Dn., G.W.S.S.B

Ankleshwar Bharuch Surat Bharuch

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

Name of Project :- “Providing, Supplying, Lowering, Laying & Jointing 350 mm & 450 mm Dia DI K-7 Pipeline And 406.4 mm

Dia MS Pipeline from parvat Pond to Sunevkalla WTP, Floting Pontoon, Supply And Instllation of puming Machinery and

Operation and maintaiunance for 04 Year Under SZBT-2 Regional Water Supply Scheme based URBC Taluka-

Ankleshwar/Hasot , District- Bharuch.”

Schedule C – OPERATION AND MAINTAINANCE

Sr. Rate in Rs.

Description unit Qty Amount

No. In figure In words

Operation, Maintenance and Repairing Civil Works And Mechanical Work as per

requirement and detailed specification of tender including all respect i.e.,

1. Operation, Maintenance and Repairing of Rising Main Pipeline / Distribution

with all types of valve and valve chamber/boosting station with pumping

machineries and other civil works with Establishment / Equipments / Materials.

2. Supply of Raw Water from Parvat Pond To Sunevkall WTP And Clear Potable

Water from Sunevkalla WTP to Utraj HW CWS

3. Supply of all kind of man power with allowances as per tender.

4. Supply of vehicle with driver, fuel, lubricants with maintenance and repairing

Rupees Four Lakh

5. Supply of all types of materials and machineries (JCB / HYDRA / Tractor /

Seventy-Six Thousand

Welding Machine / De-watering Set / truck etc.) excluding shown in schedule A. Month 48 476975.90

Nine Hundred Seventy-

6. This work including with establishment civil structure & mechanical /

Five and Ninety Paise.

electrical components insurance as per tender.

7. This work including 24 Hrs. cleaning of structures, H/W premises with grass

cutting and tree cutting with necessary establishment and machineries etc.

complete as per tender.

8. Operation, Maintenance and Repairing Head works. Sub head work site

pumping machineries and electrical equipments with establishment,

equipments and materials.

9. Providing and utilizing necessary spare parts, lubricants, tool kits and all

other running consumables.

10. Routine and emergency breakdown maintenance and all minor preventive

Volume-III, Price Bid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

repairs to all head works, sub head works site machineries and equipments.

11. Preparing of Maintenance and preservation record for pumping machinery

utilization, energy consumption, Qty of water pumped etc. as per GWSSB / EIC

prescribed Performa and submission to office.

12.Colour work of all structures building constructed under this constructed

under this contract in 2rd year & 4th year.

For 48 Month (04 Year)

Note :-The payments will be made on monthly or quarterly basis upon submisston of Invoices. The bidder will be paid at a rate fixed in the above

table as per tender terms and conditions. No quotes are required for this schedule.

• The bidders should strictly note that rate will be fixed and firm. No escalation will be given during the maintenance period.

• The work should be carried out as per the terms and conditions laid down in the tender specification.

• All other required material for O&M work shall be brought by the contractor at his own cost including loading, unloading and carting and the

same material shall got approval from the Engineer-in-charge before use in the work.

• The cost is including all type of taxes octroi, freight, loading, unloading, carting labour charges payment to labour including insurance, P.F.

and all other liabilities for the staff engaged for the O&M work.

• All replace material shall be return to department store by the contractor at his own cost.

• Painting of overall structures: Internal/external painting of civil structures, machineries, manifolds, valves etc.

Interior Paint: Distemper paint to all civil assets

Exterior paint: shall be acrylic emulsion paint colour (like APEX): pump house, treatment plants, treated water pumping stations, GSRs, ESRs,

Oil paint colour: All type of doors, windows, ventilation, shutter, pump, motor, all valves & equipment inside pump house, transformer yard, D.P.

structure, transformer etc

Black japan colour: air valve, sluice valve, riser pipe of air valve, zero velocity valve, butterfly valve (outdoor), bypass arrangement etc.

Deputy Executive Engineer Deputy Executive Engineer Executive Engineer Executive Engineer

P. H.S.Sub Div, G.W.S.S.B P. H. Mech Sub Div, G.W.S.S.B P. H.Mech., G.W.S.S.B P. H. Works Dn., G.W.S.S.B

Ankleshwar Bharuch Surat Bharuch

Volume-III,PriceBid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

1. The Schedule specifies the procedure for all such assessment of the items specified in

2. Each item of Schedule-8 has been divided into broad components. The Employer's

Representativeshall assess the value of each component as indicated in paragraph

3. Percentages are indicated against each component of each items specified in

Schedule B, based on the Employer's best appreciation of the value of the component

as related to the total costs of the concerned item as whole. A head titled (any other

item(s)) is included in each breakdown of schedule and the tenderer shall at the time of

tendering indicate any additional items which heconsiders necessary but cannot be

covered by any of the heads indicated in the breakup.

4. The percentage breakup as indicated in the Schedule may differ from that

corresponding to the tenderer's scheme and design and he should take this into

account while quoting his lump sum prices for the items specified in Schedule-B

5. The contractor shall, after approval of his detailed designs and drawings furnish to the

Employer's Representative an initial bill of quantities to all major items, to be reviewed

and updated periodically with the Employer's Representative. This bill of quantities will

be used for assessment of percentage progress of the component at any stage. By

measurement jointly taken by the Employer's Representative and the Contractor,

mutually agreed and entered in the measurement books in the form and by the method

approved by the Employer's Representative and signed jointly by both the parties.

Executive Engineer Executive Engineer

P. H.Mech., G.W.S.S.B P. H. Works Dn., G.W.S.S.B

Volume-III,PriceBid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

BREAKUPFORINTERIMPAYMENTS

(CIVIL,MECHANICAL&ELECTRICALWORKS)

Percentage Payment to

Item Description of Items

a On receipt of materials at project site 65 % of Quoted rate

b On Excavation, Lowering, laying and Jointing 20 % of Quoted rate

c On Hydraulic testing 5 % of Quoted rate

d On refilling and disposal of surplus stuff 5 % of Quoted rate

e After commissioning 5 % of Quoted rate

a On receipt of materials on site 70 % of Quoted rate

b On erection 20 % of Quoted rate

c On Hydraulic testing 5 % of Quoted rate

d After commissioning 5 % of Quoted rate

3 VALVE CHAMBERS

a On Completion works as per approved drawings 95% of Quoted rate

b After commission of system 5 % of Quoted rate

a On approval of Designs 2.0 % of Quoted rate

b On completion of Excavation & base slab 18.0 % of Quoted rate

c On completion of vertical wall up to plinth 20.0 % of Quoted rate

d Full supporting structure incl. ring beam and top slab 15.0 % of Quoted rate

On completion of pump house incl. fixing doors 10.0 % of Quoted rate

Plastering inside & outside with epoxy paint etc 10.0 % of Quoted rate

(completed with all respects)

g Painting of letters, MS ladder pipe, railing and all 15 % of Quoted rate

miscellaneous items such as snowcem paints in three

coats etc. (completed with all respects)

h After Completion 10 % of Quoted rate

ALL ELECTRO-MECHANICAL ITEAM AND

ACCESORRIES WITH FLOATING PONTOON.

On Supply of Mechanical &Electrical Equipments at 65 % Prices of Accepted Price

b After Erection of Mechanical & Electrical Equipments 20 % Prices of Accepted Price

c After Satisfactory Testing & Commissioning of 10 % Prices of Accepted Price

Mechanical & Electrical Equipments

Volume-III,PriceBid Parvat Pond to Sunevkalla WTP Connectivity, Ankleshwar

Percentage Payment to

Item Description of Items

On Completion of One Year Defect Liability Period 5 % Prices of Offered Price

d from Date Of Testing & Commissioning of Mechanical

& Electrical Equipments

5 OPERATION & MAINTANANCE

For monthly payment: 1/12th of annual

O & M prices for the year as per price

schedule C as per terms and condition

Every month/quarter in equal instalment based on

the estimated prices for O & M will be paid as per th

For quartely payment: 1/4 of annual

schedule of Payment.

O & M prices for the year as per price

schedule C as per terms and condition