8405/E8 WELCOME MAINTNANCE TO MD ACCN AND CERTAIN B/R AND E/M REPAIR WORKS A ZONE A AND ZONE B AT MIL STN SHAHJAHANPUR UNDER GE EAST BAREILLY

Amount

Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc.complete all as specified and directed.

M&L rendering 12mm thick in cement plaster 1:6 on surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement

M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and smooth without using extra cement

M&L rendering 10mm thick in cement plaster 1:4 on concrete surfaces of ceilling and finished the surface even and smooth without using extra cement all as specified

M&L for preparing old decorated surfaces of wall and applying one coat of cement base paint on old surfaces of wall complete all as specified and as directed

M&L for two coats of cement base paint incl preparation of new surface of wall complete all as specified and as directed.

M& L for two coat of oil bound distemper incl preparation of new surface of wall complete all as specified and as directed.

M& L for one coat of oil bound distemper incl preparation of old treated surface of wall complete all as specified and as directed.

M&L oil bound distemper on ceilling including preparation of new plastered surface and complete all as specified

M&L preparing Old plastered or unplastered surfaces of wall and applying two coat of white wash on old decorated surface of wall complete all as specfied and direcetd.

M&L preparing Old plastered or unplastered surfaces of ceiling and applying oil bound distemper on old decorated surface of ceiling complete all as specfied and direcetd.

M&L for preparing of old painted wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paints all as specified & directed by the Engr-in-Charge.

M&L for preparing of old painted steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified & directed by the Engr-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n. exc 4.5 sqm each complete all as specified and directed.

Taking down shutter of any description n exc 1 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed.

M&L for taking down of aluminium window/door from frame and minor repair with beading/glass repair etc and refixing same complete all as specified and directed

Taking down steel/wooden window of any size and description complete all as specified and directed.

S&F steel window with pressed steel frame(size 95*45*1.25mm)side hung shutter including box type hinges with steel handle and steel peg stay complete with glaed openable shutter with glazing bar(open outside) and wire gauged openable shutter without glazing bar(open inside),detailed or welded complete all as specified and directed and as per Drg no TD-88 sh 1/2 and 2/2. (i)Two shutter i.e wire gauged and glaed shall be fixed in one composite frame and both shutter shall be measured as one unit. (ii)rate for filling of PCC frame deemed to be included in quoted rate. (iii)MS grill,wire gauge and glass shall be measured and paid separately.

S&F steel ventilator with top hang shutter including hinges steel pag stay.complete all as specified and directed.

M&L framed work such as grills grating etc with end of bars shoulderd and/or riveted .welded or forged into spikes.framedguard bars iron doors.ladders framed balusters , walk ways. Railings, frame work of of water tanks and ssimilar work conforming to Fe410.complete all as specified and directed.

S&F 3 mm thick sheet glass, Ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

S& F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed .

S & F Mild steel work as in chowkats/frame of door or gates of angle or other section with gusset plate , rail braces etc complete drilled for fixing of steel sheeting or other covering , doors etc to be prepared for hanging or sliding with and inclu either hooks and hinges or steel hanging door fittings ( exclusive of steel , sheeting or other covering , running rails and guisides ) and hanging also fastening and fixing complete all as specified and directed.

Dismantling boarding any sidescription fixed in any position with nails all as specified and directed.

S&F 20mm thick PVC boarding with nails as in cub board shelves in any situation planed one side with butt joints complete all as specified and as direcetd.

S&F 25mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sisides..complete all as specified and directed.

S&F of 30 mm of second class hard wood Glazed and and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sisides..complete all as specified and directed.

S & F 250 mm long mild steel sliding door bolts, ISI marked clip & bolt type, stove enamelled black, with bright bolt not less than 12mm dia with and including minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

S&F haps and staple 150mm long safety type aluminium anodised with mild steel hing pin including bolt to hing plate and fixed with screws.complete all as specified and directed.

S&F 75 mm butt hinges medium weight cold rolled mild steel and fixed .complete all as specified and directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel and fixed .complete all as specified and directed.

S&F 200 mm long mild Barrel tower bolt, oval type stove enamlled black with bright bolt and fixed.complete all as specified and directed.

M & L preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L applying 2 coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation over 10 cm width and girth complete all as specified and directed.

Supply and fix in repairs galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed .

Hacking out old broken glass of (any thickness,size,quality or description) from old wooden frame ,or stones, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed.

S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisiting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing.

S&F, 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed as specified and as directed.

S&F, 100 mm long butt hinges, extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed , type C-21

S&F, 150 mm aluminium handles cast type, anodised complete all as specified and as directed.

Demolition of cement concrete (un reinforced) of any description and in any position not other specifically provided for complete all as specified and directed.

M&L for cement concrete (1:5:10) type E-2 as in foundation filling and mass concrete all as specified and directed.

M&L for preparation of sunken floor and making couvet filld at junstion of wall in CM 1:3 with water proofing compound(DURAKRIT) then apply acrylic(PMC) slurry as per mfg instruction as 1:2 on floors and wall upto floor level,and apply 2 coat after 4 hours.After that Ponding test will be carried out.After that plaster all surface with CM 1:4 20 mm thick with WPC(DURAKRIT)

Removing existing water proofing treatment and preparing surfaces to the entire satisfaction of Engineer-in-Charge / GE including taking down existing plaster, cleaning of all foreign material such as grass, roots, dust etc and roughening the concrete surfaces by wire brushing and washing down to remove dust etc. flushing at junction of parapets complete and removing the same to the places where directed by Engineer-in-Charge

M&L for rendering 15mm thick on roof surfaces in CM 1:4 complete all as specified and direcetd.

M&L for preparation of roof surfaces, applying a coat of primer@ 0.40Kgs/sqm applying a coat of bitumen grade 85/25 @1.2kg/sqm supplying and laying water proofing treatment with using polymeric water proofing membrane (weight not less then 3kg/Sqm) consisting of 100 micron HMHDPE film centre core including applying a coat of bitumen 85/25 grade @ 1.2kg per sqm on top surface of membrane and torch application of membrane with 10cm overlap where required and finally finished with and including a coat of aluminium paint @0.20Ltr/Sqm as per manufacture instruction complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L Glazed ceramic coloured tiles in vertical surface 350 mm x 250 mm x 7 mm/450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white cement or colour cement including 10 mm thick in CM 1:4 complete all as specified and as directed.

M&L providing non- skid glazed ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n xc 0.11 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M&L for Vitrified light shade colored ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and incl 15mm thick screed bed in CM 1:6 complete complete all as specified and as directed.

M&L for Vitrified light shade colored ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in skirting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and incl 10mm thick screed bed in CM 1:4 complete complete all as specified and as directed.

S&F in repair one piece vitreous china wash down water closet pan white colour including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed.

S&F in Vitreous China table top wash basin of suitable size including SS bottle trap, HDPE waste pipe including fixing on counter with SS waste coupling complete all as specified and as directed.

S & F in repair for 0.8 mm thick stainless steel in graceful glory range ,anti scratch, satin finish of popular range kitchen sink over all size 990x459mm , double bowl size 400x340xx200 mm incl waste pipe & SS coupling, washers etc. complete all necessary fittings all as specified and as directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed.

S&F in repair plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repair vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests excluding flushing cictern and flush pipe all as specified and directed

S & F in Repair 10 ltrs capasity PVC valveless syphonic action type flushing cistern low level white , with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and as directed.

S&F in repair glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

S& F in repairs Brass CP mixer 15mm Dia for mixing hot & cold water, screwed down, three joints to steel pipes or unions and plugging and screwing to walls complete all as specified and directed.

Taking down old 110/75 mm bore PVC(SWR) pipes in any position .complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches or all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints fixed to wall all as specified and directed.

S&F 75 mm bore. PVC (SWR) bends complete all as specified and directed.

S&F 110mm bore.PVC(SWR) junction single (single T) equal or unequal with access door.complete all as specified and directed.

S&F 110 mm dia PVC (SWR) vent cowl. .complete all as specified and directed.

S&F 110 mm PVC (SWR) bend any radius.complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall.complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches all specified and directed

Taking up or down existing GI Tubing15 mm dia & connections including cleaning for refixing or removal to store all as specified and as directed.

All asabove herein before but 20 mm dia all as specified and directed.

S&F,16 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F,20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Cutting chases in brick walls pinning in, making good to facings where required and pointing in cement mortar 1:3 ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing etc, and making good, cutting not exc 10 cm girth complete all specified and directed.

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plug , washer and wastes , including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe , overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and directed.

S&F alluminium alloy anodised door frame fixed with side hung shutters and glazing fixed with and including 4.80 mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed :- (a) Frame 80x44x1.98mm thick with rawl plug (b) Middle and lock rail : 150x44x1.98mm thick (c) Bottom rail : 150x44x1.98mm thick (d) Top rail/sype : 85x44x1.98mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, 100 mm long steel butt hinge ,aluminium tower bolt 9.9mm dia shoot 200mm long brass mortice lock 100mm 4 leaver ,aluminium stopper, hydraulically regulated door closer (g) Making good of wall surface to match with existing surface complete all as specified and directed. Make : Make of aluminium sectionas approved by GE and Make as approved by GE.

S&F aluminium anodised sliding windows ,shutter glazing with and including 4.8 mm thick tinted glass fixed with rubber gasket with aluminium beading, clips , frame, with duco pattern grill of size 75 mm X 75 mm and steel mosquito wire netting fixed with beading made with aluminium section suitable for three track slids . Making good of wall surfaces to match with existing surfaces complete all as specified and directed. Make : Make of aluminium section as approved by GE and Make of aluminium fittings as approved by GE.

S&F aluminium anodised windows,ventiletators frame with side hung shutters and glazing with and including 3.8 mm thick tinted glass fixed with rubber gasket with aluminium beading ,clips, frame made with aluminium section as appended below (i) Frame :65X40X1.98 mm thick (ii) Top/bottom rail and style /rail of shutter : 44X47X1.98 mm thick (iii) Aluminium beading - 0.7 mm thick (iv) Aluminium fitting such as peg stay,aluminium hinges,aluminium handle 100 mm long,aluminium tower bolt 100mm long (v) Making good of wall surfaces to match with existing surfaces complete all as specified and directed Making good of wall surfaces to match with existing surfaces complete all as specified and directed. Make : Make of aluminium section shall be Jindal/Indulco or equivalent as approved by GE and Make of aluminium fitting - Sandhu ISI or equivalent as approved by GE.

S&F in repair kitchen sink coupling of any size and any pattern including waste pipe complete all as specified and directed.

S&F in repair bib taps 15mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed all as specified (minimum wt. 90gms).complete all as specified and directed.

S&F (in repairs) Bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed..

S&F (in repairs)two way angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as specified and as directed.

S&F in repair for CP Health Faucet with 1 meter Flexible tube & Hook complete all as specified and directed.

S&F (in repairs) angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as specified and as directed.

S&F (in repairs) Stop cock (Concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule with long shank and cup for 15 mm bpre of pipe complete all as specified and as directed.

S&F in repair swivel shower rose of brass Chromium plated for fixing with 15mm pipe fixed all as specified and directed.

Dismantling of existing water tanks capacity n exc 500 ltr and removing to store complete all as specified and directed and directed.

Dismantling of existing water tanks capacity exc 500 ltr n exc 1000Lts and removing to store complete all as specified and directed.

S&F rotational moulded polethylene water tank of 500 ltrs capacity ( cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part- I complete all as specified and directed.

S&F rotational moulded polethylene water tank of 1000 ltrs capacity ( cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part- I complete all as specified and directed.

S&F in repair 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 210gms).complete all as specified and directed.

S&F 20 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe complete all as specified and directed.

S&F in repair vitreous china wash basin white, flat, back, size 550x400 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe all as specified and directed.

S&F 15mm bore pillar tap cast copper allloy with capstan head Chromium plated scwed down with or without letter Hot or Cold with long shank and fly nuts scrwed for iron pipe and fixed as specified and directed.

S&F in repair only 32mm dia wast fittings brass chromium plated for basin with long screwed shank and fly nuts, flange end bedded in red lead cement and other end fixed.complete all as specified and directed.

Supply and fix 32mm/40mm dia waste pipe for wash hand basin/urinals complte all as specified and directed

S&F in repair PVC connection 15mm bore length not less than 600 mm long with both ends PTMT nuts complete all as specified and directed.

S&F in repair 15mm bore angle stop valve of PTMT any colour high prssure screwed for iron pipe and fixed all as specified (minimum wt. 90gms).

S&F in repair CP towel rail(tubular type) 20mm dia, 600 mm long between flanges all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor for pavings n.exc 15cm thickness (below are above ground level) complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C2 using( 40mm graded stone aggregate) as in plinth protection/foot path finishing cement concrete even and smooth with out using extra cement complete all as specified and as directed.

Demolition of stone slab and tiles of any description or thickness in floor, aprons etc..complete all as specified and directed.

M&L for machine cut mirror polish kota stone slab flooring20-25mm thich over 15mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigmen to match the shad of the slab including round nosing at corners rubbing and polishing .complete all as specified and directed.

M&L for machine cut mirror polish kota stone slab 20-25mm thich in riser of step,skirting,dado and pillers over and including 10mm thick rendering in CM 1:4 including rubbing and polishing .complete all as specified and directed.

M&L mirror polishing on marble/granite/kota stone/stone work where ever required to give high gloss finish complete

M&L for 20mm thick granite stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar incl all quoins, arches, pillars etc complete all as specified and directed.

M&L brick work with sub class B bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets as specified and directed

S&F 6 mm thick non asbestos fibre cement building board fixed/inserted to timber/GI/Aluminium frame work placed in false ceiling grid made of Anodised aluminium snap grid size 605x605mm frame work for false ceiling and as per specification and drawing as in false ceiling all as specified, including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

S&F in repair PVC sheet 5 mm thick of any colour as in partition etc ,fixed to RCC/MS/wooden angles complete all as specified and directed

S&F in repair fancy type curtain rod 25mm dia SS wall thickness 1 mm bracket,stops,rollers etc complete all as specified and directed

S&F in repair 600mmx450mm bevelled edges mirror consisting of 5.5mm thick with four holes incl nut & bolt fancy type/stainless steel fixed to wall complete all as specified and directed.

S&F 6 mm thick PVC pannelled hollow type with stiffener inside & top and bottom layer prelaminated PVC sheet not lees than 0.5 mm thick fixed to wall or solid PVC sheet strip 50cm X 5cm @ 1 meter c/c complete all as specified and directed

Taking down carefully aluminum, light, fan, socket or power point complete including unserviceable fittings such as switches ceiling roses, pendants, regulators, sockets etc at site and making good the disturbed surfaces of walls, floors filling up of holes, plastering white washing distempering etc matching to the existing etc.

M&L for point wiring for one light/fan, bell/ buzzer point controlled by one switch with cable 1.5 Sqmm size PVC insulated (unsheathed) 1100 volts grade single core stranded (multistrand) copper conductor FRLS cable and drawing in and including non metallic rigid PVC concealed conduit medium grade inclusive of conduit fittings such as Bends Teess reducers etc and galvanized iron sheet steel terminal boxes/modular flush boxes of size 16 gauge thickness, light switches sockets with 3mm thick bakelite laminated sheet brass screws and cup washers including one continuous run of 1.50 Sqmm nominal area PVC insulated unsheathed 1100 Volts grade single core FRLS cable with solid copper conductor green in colour with wire and connecting to earth dolly complete.

All as per Item Ser no 121 above but for One light / Fan point controlled by one way switch complete all as specified and directed.

All as per Item Ser no 121 above but for One Bell /Buzzer point controlled by one way switch complete all as specified and directed.

All as per Item Ser no 121 above but for One 3/5 pin 5 Amps socket outlet on independent board complete all as specified and directed.

All as per Item Ser no 121 above but for One 3/5 pin 5 Amps socket outlet on same board complete all as specified and directed.

All as per Item Ser no 121 above but for one light point controlled by two way switches complete all as specified and directed.

All as per item Ser No.121 here in before but with using copper conductor of 2.5 Sqmm for one 3/5 pin socket outlet 15 Amps on independent and using 2.5 Sqmm copper conductor as earth continuty cable compete all as specified and directed.

Supply and fixing in replacement switch piano flush type polycarbonate single pole one way 5 Amps complete all as specified and directed.

Supply and fixing in replacement socket out let sefty shutter 5 pin 5 Ampsflus type all as specified and directed.

Supply and fix in replacement bell push flush type 5 Amps complete all as specified and directed.

Supply and fixing in replacement switch piano flush type one way 15 Amps SP complete all as specified.

Supply and fixing in replacement socket outlet polycarbonate 2 in 1 , 3 pin 5 / 15 Amps flush type complete all as specified and directed.

S& F in replacement swicth flush type 5 Amps single pole two way all as specified and directed.

S&F in replacement switch modular flush button single pole one way 15 Amp complete all as specified and directed.

S&F socket in replacement out let 3 pin 5/15 Amp multipurpose, modular flush type 240 volt complete all as specified and directed..

M & L for replacement of Step fan regulator modular type for ceiling fan of any sweep complete all as specified and directed by Engr-in-Charge complete all as specified and directed.

S&F socket out let 3 pin 5 amp multipurpose modular flash type complete all as specified and directed..

S&F switch 6 Amp modular flush type 240 volt one way complete complete all as specified and directed.

S&F in replacement ceiling rose 3 terminals PVC / Polycarbonate insulated body 65mmx 50mm size complete all as spcified and directed.

Supply and fixing in replacement bell ding-dong musical AC 230 Volts single pole complete all as specified and directed.

S&F in replacement Stepped type electronics fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light completewith driver, holders & LED lamp/ offwhite suitable for roof ceiling including connecting up with driver threecore flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with hefficiency PMMA diffuser soft glare free light completewith driver,with warm white suitable for roof ceiling including connecting up with driver threecore flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fix Modular White cover plates with frame 8 Module complete all as specified and directed.

Supply and fix Modular White cover plates with frame 6 Module complete all as specified and directed.

Supply and fix Modular White cover plates with frame 4 Module complete all as specified and directed.

Supply and fix Modular White cover plates with frame 3 Module complete all as specified and directed.

Supply and fix Modular White cover plates with frame 2 Module complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V,AC 4 feet decorative box type with driver, holder includingLED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceilingrose complete all as specified by Engr-In-Charge.

Suppply and fixing submain wiring with using two single core 6.0 SQmm copper multy stranded conductor PVC insulated and unsheathed (FRLS) cable and one single core 6.0 Sqmm copper multistandred conductor PVC insulated and unsheathed (FRLS) Earth wire using ISI MArked IS 694 1100 volts grade PVC insulated flexible stranded copper conductor wire drawn through with and including medium grade concealed PV C conduit ISI marked not less than 25 mm dia including conduit fitting and accessories complete including cutting cheses in existing wall of any descirption buiolt in ccement mortor and making good the disturbed surfaces in cement mortor (1:4) and finishing the surfaces to match with existing surfaces and finish termonatioin with bottle type copper lugs conduit being laid either in ceiling slab or wall or on surfaces or under the frame of the false ceiling including PVC flexible conduit or through wooden partition including clamping arrangement as required complete all as sepcified and directed .(Note:- Two Run of 6.0 Sqmm cable and one run of 6.0 sqmm earth wire in and including conduit of suuitable size shall be measured as one unit).

All as per item Ser No.145 here in before but with using copper conductor of 2.5 Sqmm and using 2.5 Sqmm copper conductor as earth continuty cable compete all as specified and directed.

All as per item Ser No.145 here in before but with using copper conductor of 4 Sqmm and using 4 Sqmm copper conductor as earth continuty cable compete all as specified and directed.

S&F PVC rectangular gang box multi purpose 5/15 Amps including making connections complete all as specified.

Supply and replace Rigid PVC casing & capping 20/25 mm wide complete all as specified and directed.

S&F PVC rectangular gang box multi purpose 5 Amps including making connections complete all as specified.

Taking down old unsv buildig security light fitting, Supply and fixing new energy saving LED light fitting 35 watt made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK07 as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and as directed by E-In-C.

M & L for GI Bracket made out of 25 mm GI Pipe light grade 1.20 m length bend to shape including clamps, nuts bolt and washer and fixing to wall/ floor complete as directed by Engr - in - Charge.

S&F for MCB SP 6-32 Amps breaking capacity 10 KA 'C' series 240 volts 50 Hz complete all as specified and directed.

S&F for MCB SP&N 10 to 63 Amps breaking capacity 10 KA 'C' series 240 volts 50 Hz complete all as specified and directed.

S&F MCB distribution board double door sheet steel powder coated DBs suitable for MCB fitted with bus bar neutral link earth bar and din rail single phase 240 volts and neutral confirms to IS 13032- 1991 of 4 Ways complete all as specified and directed.

S&F double door MCB distribution board sheet steel powder coated DBs suitable for MCB fitted with bus bar neutral link earth bar and din rail single phase 240 volts and neutral confirms to IS 13032- 1991 of 8 Ways complete all as specified and directed.

Supply and fixing, Life savior plug 16 A (Plug top) , of power, built in test and reset button complete all as specified and directed

Taking down ceiling fans 48”/56” sweep, cleaning of dust properly cleaning, greasing& overhualing of bearings including refixing and connecting up all as directed .

S&F in replacement of old burnt fan1200 MM sweep with super enameled whitr colour copper binding of motor suitable size 1200mm sweep ceiling fan of any make, type, complete all as specified and as directed

Supply and fix in repairs 2.50 Mfd capacitior complete all as specified and as directed.

Supply and fix in repairs 3.15 Mfd capacitior complete all as specified and as directed.

Supply and fix in repairs 4.00 Mfd capacitior complete all as specified and as directed.

Supply and fix in repairs ball bearing suitable for exsiting ceiling fans on site complete all as specified and as directed.

Supply and fix in repair ‘U’ clamps complete with nut, bolts & split pins Heavy duty suitable for existing ceiling fan complete all as specified and as directed.

Supply and fix in repair M.S. rod for ceiling fans 3 ft long with ‘U’ clamp at one end other end with out nut bolts washers or screwed thread with check nuts & pin complete all as specified and as directed.

Material and labour for rewinding of burnt fan motor with super enameled copper wire of suitable size 1200/1400mm sweep ceiling fan of any make, type, model including transporation (inclusive of material & labour) complete all as specified and as directed

M & L Painting of ceiling fans1200 mm /1400mm & Exhaust fans 250/300/450mm complete, in situwith synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed..

M &L Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan all as specified

Taking down exhaust fans 250/300 mm Sweep and cleaning the dust properly, oiling, greasing & overhualing and replacement of defective ,born out parts of bolts and bearings including refixing and connecting up all as directed Note : Replacement of defective/worn out parts will be measured & paid for separately

Taking down exhaust fans 400/450 mm Sweep and cleaning the dust properly, oiling, greasing & overhualing and replacement of defective ,worn out parts of bolts and bearings including refixing and connecting up all as directed Note : Replacement of defective/worn out parts will be measured & paid for separately

Supply and fix Ball bearings suitable for existing exhaust fans as per site complete all as specified and directed.

Supply and fix copper alloy Bush suitable for existing exhaust fans as per site complete all as specified and directed.

Material and Labour for rewinding of exhaust fans 250/300 mm Sweep with super enameled copper wire of suitable size of any make/type/model including transporation complete all as specified and directed.

Material and Labour for rewinding of exhaust fans 400/450 mm Sweep with super enameled copper wire of suitable size of any make/type/model including transporation complete all as specified and directed.

Supply and fix in replacement of Exhaust fan Steel body ac single phase 230 volt of size 300mm sweep with blades and frame and louvers. Complete all as specified and directed

Supply and fix in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm all as specified and directed.

M/S WASEEM KHAN CONTRACTOR (BID ID -3332701)

M/S CHAUHAN ELECTRIC WORKS (BID ID -3334373)

M/S MANSI TRADERS (BID ID -3331137)