Loading…
Loading…
Tender Value
₹60.0 L
EMD Value
₹1.2 L
Closing Date
15 Jul 2026, 1:00 pm
Similar tender results from the same govt authority in the past 3 years.
Repair to staff quarters at HJP, NYO, DGA, BAGL & GJH under jurisdiction of SSE/Works/HJP.
SEE26-27-65
SEE26-27-65
Open
12 Months
Unknown (Unspecified Location)
₹0
₹1.2 L
22 Jun 2026
22 Jun 2026
1 Jul 2026
corrections as per (Schedule A) Annexure "A-1" except steel reinforcement.
All items in connection with works under CPWD-DSR-2021 schedule with up to date corrections as
per (Schedule A) Annexure "A-1" except steel reinforcement.
S No. Item No Description of Item Unit Qty Rate Amount
2.0 EARTH WORK
Earth work in excavation by mechanical means
(Hydraulic excavator)/manual means over areas
(exceeding 30 cm in depth, 1.5 m in width as well
as 10 sqm on plan) including getting out and
disposal of excavated earth lead upto 50 m and lift
upto 1.5 m, as directed by Engineer-in-charge.
2.27 Supplying and filling in plinth with sand under cum 30 2161.2 64836
2 floors, including watering, ramming, consolidating
and dressing complete.
4.0 CONCRETE WORK
4.1S CEMENT CONCRETE (CAST IN SITU)
SONPUR DIVISION-ENGINEERING/EAST CENTRAL RLY
Providing and laying in position cement concrete
4.1 of specified grade excluding the cost of centering
and shuttering - All work up to plinth level :
4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived cum 22 7365.15 162033.3
3 from natural sources : 4 graded stone aggregate
20 mm nominal size derived from natural sources)
6.0 MASONRY WORK
Brick work with common burnt clay F.P.S. (non
modular) bricks of class designation 7.5 in
superstructure above plinth level up to floor V
level in all shapes and sizes in :
6.12S HALF BRICK MASONRY
Half brick masonry with common burnt clay F.P.S.
(non modular) bricks of class designation 7.5 in
superstructure above plinth level up to floor V
8.0 CLADDING WORK
Providing and fixing 18 mm thick gang saw cut,
mirror polished, premoulded and prepolished,
machine cut for kitchen platforms, vanity
counters, window sills, facias and similar locations
of required size, approved shade, colour and
8.2 texture laid over 20 mm thick base cement mortar
1:4 (1 cement : 4 coarse sand), joints treated with
white cement, mixed with matching pigment,
epoxy touch ups, including rubbing, curing,
moulding and polishing of edges to give high gloss
finish etc. complete at all levels.
Granite stone slab of colour black, Cherry/Ruby
8.20S STONE WORK DRY CLADDING
8.31 Providing and fixing Ist quality ceramic glazed wall Sqm 640 1063.45 680608
tiles conforming to IS: 15622 (thickness to be
specified by the manufacturer), of approved make,
in all colours, shades except burgundy, bottle
green, black of any size as approved by Engineer-
7 in-Charge, in skirting, risers of steps and dados,
over 12 mm thick bed of cement mortar 1:3 (1
cement : 3 coarse sand) and jointing with grey
cement slurry @ 3.3kg per sqm, including pointing
in white cement mixed with pigment of matching
shade complete.
9.0 WOOD AND P.V.C. WORK
9.1S FRAMES AND TRUSSES
Providing wood work in frames of doors, windows,
clerestory windows and other frames, wrought
framed and fixed in position with hold fast lugs or
with dash fasteners of required dia & length (hold
fast lugs or dash fastener shall be paid for
8 9.1.3 Kiln seasoned and chemically treated hollock wood cum .35 74199.7 25969.9
Providing and fixing 25 mm thick shutters for cup
Providing and fixing ISI marked flush door shutters
conforming to IS : 2202 (Part I) decorative type,
core of block board construction with frame of 1st
class hard wood and well matched teak 3 ply
veneering with vertical grains or cross bands and
face veneers on both faces of shutters.
9.20.2 30 mm thick including ISI marked Stainless Steel Sqm 20 2818.5 56370
butt hinges with necessary screws
9.40S MISCELLANEOUS-WOOD WORK
SONPUR DIVISION-ENGINEERING/EAST CENTRAL RLY
Providing and fixing fly proof galvanized M.S. wire
gauge to windows and clerestory windows using
9.51 wire gauge with average width of aperture 1.4 mm
in both directions with wire of dia 0.63 mm all
9.105S GYPSUM BOARD PARTITIONS
9.119 Providing and fixing factory made P.V.C. door Metre 90 408.25 36742.5
frame of size 50x47 mm with awall thickness of 5
mm, made out of extruded 5mm rigid PVC foam
sheet, mitred at corners and joined with 2 Nos of
150 mm long brackets of 15x15 mm M.S. square
tube, the vertical door frame profiles to be
reinforced with 19x19 mm M.S. square tube of 19
gauge, EPDM rubber gasket weather seal to be
provided through out the frame. The door frame to
be fixed to the wall using M.S. screws of 65/100
mm size, complete as per manufacturer's
specification and direction of Engineer- in-Charge.
Providing and fixing factory made panel PVC door
shutter consisting of frame made out of M.S. tubes
of 19 gauge thickness and size of 19 mm x 19 mm
for styles and 15x15 mm for top & bottom rails.
M.S. frame shall have a coat of steel primers of
approved make and manufacture. M.S. frame
covered with 5 mm thick heat moulded PVC 'C'
channel of size 30 mm thickness, 70 mm width out
of which 50 mm shall be flat and 20 mm shall be
tapered in 45 degree angle on both side forming
styles and 5 mm thick, 95 mm wide PVC sheet out
of which 75mm shall be flat and 20 mm shall be
tapered in 45 degree on the inner side to form top
and bottom rail and 115 mm wide PVC sheet out of
which 75 mm shall be flat and 20 mm shall be
tapered on both sides to form lock rail. Top,
bottom and lock rails shall be provided both side
of the panel. 10 mm (5 mm x 2 ) thick, 20 mm
wide cross PVC sheet be provided as gap insert for
top rail & bottom rail, paneling of 5 mm thick both
side PVC sheet to be fitted in the M.S. frame
welded/ sealed to the styles & rails with 7 mm (5
mm+2 mm) thick x 15 mm wide PVC sheet
beading on inner side, and joined together with
solvent cement adhesive. An additional 5 mm
thick PVC strip of 20 mm width is to be stuck on
the interior side of the 'C' Channel using PVC
solvent adhesive etc. complete as per direction of
Engineer-in-charge, manufacturer's specification &
12 9.120.2 30 mm thick pre laminated PVC door shutters Sqm 25 2455.1 61377.5
11.0 FLOORING
11.2 Dry brick on edge flooring in required pattern with Sqm 50 733.3 36665
bricks of class designation 7.5 on a bed of 12 mm
mud mortar, including filling joints with local sand,
with common burnt clay non modular bricks.
Cement concrete flooring 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate) finished
11.3 with a floating coat of neat cement, including
cement slurry, but excluding the cost of nosing of
steps etc. complete.
11.3.1 40 mm thick with 20 mm nominal size stone Sqm 400 545 218000
11.37S CERAMIC GLAZED TILES
SONPUR DIVISION-ENGINEERING/EAST CENTRAL RLY
11.37 Providing and laying Ceramic glazed floor tiles of Sqm 170 935.6 159052
size 300x300 mm (thickness to be specified by the
manufacturer) of 1st quality conforming to IS :
15622 of approved make in colours such as White,
15 Ivory, Grey, Fume Red Brown, laid on 20 mm thick
cement mortar 1:4 (1 Cement : 4 Coarse sand),
Jointing with grey cement slurry @ 3.3 kg/sqm
including pointing the joints with white cement
and matching pigment etc., complete.
11.41S VITRIFIED FLOOR TILES
Providing and laying vitrified floor tiles in different
sizes (thickness to be specified by the
manufacturer) with water absorption less than
0.08% and conforming to IS: 15622, of approved
11.41 make, in all colours and shades, laid on 20mm
thick cement mortar 1:4 (1 cement : 4 coarse
sand), jointing with grey cement slurry @ 3.3 kg/
s q m including grouting the joints with white
cement and matching pigments etc., complete.
12.0 ROOFING
Providing, fixing and embedding sand cast iron
accessories for rain water pipes in the masonry
12.40 surrounded with 12 mm thick cement mortar of
the same mix, as that of masonry (lead caulking
will be paid for separately):
Providing and fixing on wall face unplasticised
Rigid PVC rain water pipes conforming to IS :
12.41 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for
thermal expansion, (i) Single socketed pipes.
Providing and fixing on wall face unplasticised -
PVC moulded fittings/ accessories for unplasticised
Rigid PVC rain water pipes conforming to IS :
13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for
thermal expansion.
Providing and fixing unplasticised -PVC pipe clips
of approved design to unplasticised - PVC rain
water pipes by means of 50x50x50 mm hard wood
12.43 plugs, screwed with M.S. screws of required
length, including cutting brick work and fixing in
cement mortar 1:4 (1 cement : 4 coarse sand) and
making good the wall etc. complete.
13.0 FINISHING
13.4S CEMENT PLASTER (IN COARSE SAND)
13.4 12 mm cement plaster of mix :
13.25 Extra for plastering:
13.26 Providing and applying plaster of paris putty of 2 Sqm 3900 214.3 835770
20 mm thickness over plastered surface to prepare
the surface even and smooth complete.
13.44S EXTERIOR FINISHING
Finishing with Deluxe Multi surface paint system
13.48 for interiors and exteriors using Primer as per
manufacturers specifications :
13.48.1 Two or more coats applied on walls @ 1.25 ltr/10 Sqm 7500 158.95 1192125
21 sqm over and including one coat of Special primer
applied @ 0.75 ltr /10 sqm
Applying priming coats with primer of approved
13.85 brand and manufacture, having low VOC (Volatile
Organic Compound ) content.
SONPUR DIVISION-ENGINEERING/EAST CENTRAL RLY
Painting with synthetic enamel paint of approved
13.99 brand and manufacture of required colour to give
an even shade :
14.0 REPAIRS TO BUILDING
14.75AS ROUTINE MAINTENANCE WORK
Providing & fixing White vitreous china water
closet squatting pan (Indian type) along with "S"
or "P" trap including dismantling of old WC seat
and "S" or "P" trap at site complete with all
operations including all necessary materials,
labour and disposal of dismantled material i/c
malba, all complete as per the direction of
Engineer-in charge.
15.0 DISMANTLING AND DEMOLISHING
Demolishing cement concrete manually/ by
mechanical means including disposal of material
within 50 metres lead as per direction of Engineer
15.2.1 Nominal concrete 1:3:6 or richer mix (i/c cum 10 2007.1 20071
equivalent design mix)
15.56 Dismantling old plaster or skirting raking out joints Sqm 1200 45.05 54060
and cleaning the surface for plaster including
disposal of rubbish to the dumping ground within
50 metres lead.
17.0 SANITARY INSTALLATIONS
Providing and fixing wash basin with C.I. brackets,
15 mm C.P. brass pillar taps, 32 mm C.P. brass
17.7 waste of standard pattern, including painting of
fittings and brackets, cutting and making good the
walls wherever require:
17.7.3 White Vitreous China Wash basin size 550x400 Each 10 2040.85 20408.5
mm with a pair of 15 mm C.P. brass pillar taps
Providing and fixing Stainless Steel A ISI 304
(18/8) kitchen sink as per IS:13983 with C.I.
17.10 brackets and stainless steel plug 40 mm, including
painting of fittings and brackets, cutting and
making good the walls wherever required :
17.10.1 Kitchen sink with drain board
Providing and fixing P.V.C. low level flushing
cistern with manually controlled device (handle
lever) conforming to IS : 7231, with all fittings and
fixtures complete.
18.0 WATER SUPPLY
18.7S C.P.V.C. PIPES
Providing and fixing Chlorinated Polyvinyl Chloride
(CPVC) pipes, having thermal stability for hot &
cold water supply including all CPVC plain & brass
18.9 threaded fittings This includes jointing of pipes &
fittings with one step CPVC solvent cement,
trenching, refilling & testing of joints complete as
per direction of Engineer in Charge.-External work
18.15S BRASS FITTINGS
Providing and fixing brass bib cock of approved
Providing and fixing brass stop cock of approved
SONPUR DIVISION-ENGINEERING/EAST CENTRAL RLY
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ApprovedTenderdoc65.pdf
ATTACHMENT
PolicyRBCE6dt.17.05.2004.pdf RB POLICY
ATTACHMENT
TelecomCircular9-2023.pdf
ATTACHMENT
B.Gsubmissionguideline_.pdf
ATTACHMENT
PolicyRBCE6dt.17.05.2004.pdf
ATTACHMENT
Download all tender documents and submit your bid