Road

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

1 Clearing and grubbing road land including 0.99 28393.03 Hect.

uprooting rank vegetation grass bushes,

shrubs, sapling and trees girth up to 300 mm

removal of stumps of trees cut earlier and

disposal of unserviceable materials (C) By

mechanical means in area of light jungle

2 Earthwork for embankment including breaking 34164.00 183.70 Cum

clods, dressing with all lead and lift and

including watering rolling and consolidation of

subgrade in layers at O.M.C. to required dry

density including filling the depression which

occur during the process using power roller

8T to 10T. From Borrow area with all lead and

3 Providing, laying, and compacting Quarry 396.00 865.56 Cum

spall for Road side shoulders including

spreading in uniform thickness, rolling with

vibratory roller 80-100 kN static wt. to proper

grade and camber including watering etc.

4 Construction of B.T.M.C. granular sub-base 5163.00 1704.11 Cum

by providing granular material of Grading II,

spreading in uniform layers with motor grader

on prepared surface, mixing by mix in place

method with front end loader at OMC, and

compacting with vibratory roller to achieve the

desired density, complete as per clause

5 Providing, laying, spreading and compacting 3579.00 1932.81 Cum

stone aggregates of specific sizes to water

bound macadam (Grade-II) (B.T. Metal of size

45 to 63 mm) specification including

spreading in uniform thickness, hand packing,

rolling with 3 wheeled steel/ vibratory roller in

stages to proper grade and camber, applying

and brooming requisite type of screening/

binding Materials to fill up the interstices of

coarse aggregate, watering and compacting

to the required density.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

6 Providing, laying, spreading and compacting 5192.00 1674.98 Cum

graded B.T.M.C. stone aggregate to wet mix

macadam specification including premixing

the Material with water at OMC in mechanical

mix plant carriage of mixed Material by tipper

to site, laying in uniform layers with grader in

sub- base / base course on well prepared

surface and compacting with vibratory roller to

achieve the desired density.

7 Providing and applying Priming coat, using 33126.00 59.59 Sqmt

SS1 emulsion bitumen at the rate 7.5 kg. /

sq.m. on W.B.M./ W.M.M. surface including

cleaning the surface etc. complete.

8 Providing and applying Tack coat, using VG- 33126.00 13.40 Sqmt

30 bitumen at the rate 2.5 kg. / 10 sq.m. on

B.T. surface including cleaning the surface

etc. complete.

9 Providing & laying 37.50mm thick Bituminous 2485.00 2453.39 M.T.

grout base course using B.T. stone aggregate

as per required gradation with asphalt of VG-

30 grade at the rate of 1.99% i.e. 19.90 Kg/

M.T. including heating & mixing in drum mix

plant transporting the mix spreading the same

by paver finisher and consolidation by

vibratory roller as per MORT&H specification

including cost of all materials fuel, labours,

tools and plant etc using contractors own

drum mix plant etc. comp.

10 Providing & laying 50.00 mm thick 3644.00 3234.96 M.T.

Bituminous macadam with VG-30 for tack

coat @ 2.50 kg / 10 smt. on B.T. surface

and using B.T. stone aggregate as per

required gradation with asphalt of VG-30 at

the rate of 3.40 % i.e. 34.0 Kg/ M.T. by weight

mix including heating & mixing in drum mix

plant transporting the mix spreading the same

by paver finisher and consolidation by

vibratory roller as per MORT&H specification

including cost of all materials fuel, labours,

tools and plant etc using contractors own

drum mix plant etc. comp.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

11 Providing and laying 25 mm thick compacted 1905.00 3864.52 M.T.

S.D.B.C. with B.T. stone chips as per MORT

& H gradation and specification with bitumen

grade for mixing at the rate of 50.00 kg/M.T.

by weight of total mix i.e.") (5.0 % by weight

of total mix) including heating the asphalt and

aggreates by drum mix plant and spreading

the same by paver finisher including rolling

and consolidation with 10-12 tonnes vibratory

and power roller and providing all materials,

equipments, tools, and plants, fire wood, oil,

kerosene, labour charges etc and using

contractor's own machineries drum mix plant

and paver finisher etc complet.

12 Providing and fixing ordinary Kilometer stone 4.00 1290.57 No.

of precast C.C. 1:2:4 including necessary

reinforcement as per I.R.C. type design in

C.C.1:4:8 including letter and paints etc.

complete (For N.H., S.H. and M.D.R.)

13 Providing and fixing Hectometer as per I.R.C. 14.00 356.50 No.

type design including painting, lettering etc.

complete. (ii) Fixing in C.C. 1:5:10

14 Providing and fixing indicator stone of 185.00 343.27 No.

approved stone as per I.R.C. type design in

C.C. 1:4:8 including white washing etc.

complete. (ii) Fixing in C.C. 1:5:10

15 Providing and fixing guard stone as per I.R.C. 68.00 349.11 No.

type design including white washing etc.

complete. (ii) Fixing in C.C. 1:5:10

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

16 Cautionary Warning Sign :- Providing and fixing 6.00 3906.19 No.

sign boards made out of 2mm aluminium sheet /

4mm ACP (Aluminum composite Panel); size

x 90 x 90 cms. equilateral triangle as per design

of IRC-67-2012. Pre treated with phospheting

process & acid etching; coated with one coat of

epoxy primer and two coats of best quality

epoxy paint ; reflectorised with High Intensity

Prismatic Grade retro refiective sheeting of Type-

4 as per ASTM D-4956 and latest M.O.S.T.

Specifications; 3.6mtr long stand post of Iron

Angle75 x 75 x 6mm / 65NB Circular MS Pipe

as required and frame fabricated from suitable

size iron angle of 35 x 35 x 3mm; paintedwith

best quality epoxy coatings in black and white

bends. The details of symbol for each board

shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC

block of size 45 x 45 x 60 Cms. for each leg

including excavation, curing etc. complete under

the supervision of engineer in charge. A

warranty for 7 years for the Retro reflective

sheeting from original manufacturer & a certified

copy of 3 year outdoor exposure test report from

third party test lab for the product offered shall

be submitted by contractor. (B) Class-B Type-4

Retro Reflective sheeting

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

17 Facility Informatory Sign :- Providing and fixing 4.00 3990.64 No.

sign boards made out of 2mm aluminium sheet /

4mm ACP (Aluminum composite Panel); size

x 60 cms. rectangular as per design of IRC-67-

2012. Pre treated with phospheting process &

acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint

; reflectorised with High Intensity Prismatic

Grade retrorefiective sheeting of Type-4 as per

ASTM D-4956 and latest M.O.S.T.

Specifications; 3.6mtr long stand post of Iron

Angle 75 x75 x 6mm / 65NB Circular MS Pipe

as required and frame fabricated from suitable

size iron angle of 35 x 35 x 3mm; painted with

best quality epoxy coatings in black and white

bends. The details of symbol for each board

shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC

block of size 45 x 45 x 60 Cms. for each leg

including excavation, curing etc. complete under

the supervision of engineer in charge. A

warranty for 7 years for the Retro reflective

sheeting from original manufacturer & a certified

copy of 3 year outdoor exposure test report from

third party test lab for the product offered shall

be submitted by contractor. (B) Class-B Type-4

Retro Reflective sheeting.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

18 Regulatory / Mandatory Sign :-Providing and 6.00 3540.12 No.

fixing sign boards made out of 2mm aluminium

sheet / 4mm ACP (Aluminum composite Panel);

size 60 cms. Dia Circle as per design of IRC-67-

2012. Pre treated with phospheting process &

acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint

; reflectorised with High Intensity Prismatic

Grade retrorefiective sheeting of Type-4 as per

ASTM D-4956 and latest M.O.S.T.

Specifications; 3.6mtr long stand post of Iron

Angle 75 x75 x 6mm / 65NB Circular MS Pipe

as required and frame fabricated from suitable

size iron angle of 35 x 35 x 3mm; painted with

best quality epoxy coatings in black and white

bends. The details of symbol for each board

shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC

block of size 45 x 45 x 60 Cms. for each leg

including excavation, curing etc. complete under

the supervision of engineer in charge. A

warranty for 7 years for the Retro reflective

sheeting from original manufacturer & a certified

copy of 3 year outdoor exposure test report from

third party test lab for the product offered shall

be submitted by contractor. (B) Class-B Type-4

Retro Reflective sheeting.

19 Providing and fixing Junction board of M.S. 2.00 5236.70 No.

plates and angles asper standard I.R.C. design

including fixing in C.C. 1:4:8 with necessary

excavation painting figuring and lettering on

board etc. complete.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

20 Chevron sign :- Providing and fixing sign boards 6.00 3711.75 No.

made out of 1.5mm aluminium sheet / 3mm

ACP (Aluminum composite Panel); size

60x50cm rectangular as per design of IRC-67-

2012. Pre treated with phospheting process &

acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint

; reflectorised with High Intensity Prismatic

Grade retro refiective sheeting of Type-4 as per

ASTM D-4956 and latest M.O.S.T.

Specifications; 3.3 mtr long stand post of Iron

Angle 75 x 75 x 6mm / 65NB Circular MS Pipe

as required and frame fabricated from suitable

size iron angle of 35x35x3 mm; painted with

best quality epoxy coatings in black and white

bends. the details of symbol or inscription /

numerals for each board shall be as per the

instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC block of size 45 x 45 x

60 Cms. for each leg including excavation,

curing etc. complete under the supervision of

engineer in charge. A warranty for 7 years for

the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test

lab for the product offered shall be submitted by

contractor. (A) Class-B Type-4 Retro Reflective

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

21 Hazard Marker Sign :- Providing and fixing sign 10.00 3518.69 No.

boards made out of 2.0 mm aluminium sheet /

mm ACP (Aluminum composite Panel); size

90x30 cms. rectangular as per design of IRC-67-

2012. Pre treated with phospheting process &

acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint

; reflectorised with High Intensity Prismatic

Grade retro refiective sheeting of Type-4 as per

ASTM D-4956 and latest M.O.S.T.

Specifications; 1.8mtr long stand post of Iron

Angle 75 x 75 x 6mm / 65NB Circular MS Pipe

as required and frame fabricated from suitable

size iron angle of 35 x 35 x 3mm; painted with

best quality epoxy coatings in black and white

bends. The details of symbol for each board

shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC

block of size 45 x 45 x 60 Cms. for each leg

including excavation, curing etc. complete under

the supervision of engineer in charge. A

warranty for 7 years for the Retro reflective

sheeting from original manufacturer & a certified

copy of 3 year outdoor exposure test report from

third party test lab for the product offered shall

be submitted by contractor. (B) Class-B Type-4

Retro Reflective sheeting

22 Road marking with hot applied thermoplastic 1148.00 367.72 Sqmt

paints with reflectorising glass beads on bitumin

surface providing and laying a hot applied

thermoplastic compound 2.5 mm thick including

reflectorising glass beads @ 250gms per sqm

area, thickness of 2.5mm is excluding of surface

applied glass beds as per IRC:35-2015. The

finished surface to be level, uniform and free

from streaks and holes. zebra patta /bump patta

lane/center line/ edge line/cut patta. The white

color marking should provide liminance

coefficinet on cemend road shalll be min

mcd/m2/lux and Asphalt road shall be min

mcd/m2/lux during the service life during the day

time. The marking should meet the performance

criteria for night time reflectivity, wet reflectivity

and skid resistance as mentioned in the section-

15 of IRC 35-2015. Warranty for the Retro

reflectivity should be two years.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

23 Citizen' s information Board- Providing and 1.00 12180.30 No.

fixing of typical MMGSY information board as

per instruction. Two MS plates of 1.6 mm thick,

of 900 mm x 750mm size fixed at top & bottom

duly welded with MS angles of 25 x 25 x 5 mm

thick M.S plate shall be welded by two vertical

M.S flats & four horizontal M.S flates 5 mm thick

to 75 mm x 75 mm of 12 SWG square tubes

posts duly embedded in cement concrete M-15

grade blocks of 600mm x 600mm x 75mm,

below ground level. Painting New letters &

figure of any shade with ready mixed synthetic

enample paint of superior quality in required

shade and colour, All sections of framed posts

and steel tube will be painted with primer and

two coats of epoxy paints as per drawing Clause

1701 and Annexure 1700.1 (10.16)

24 MMGSY "LOGO" Board : Providing and fixing of 1.00 4657.89 No.

MMGSY LOGO informatory sign board with Logo as per

section 1700 of MORD specifications and drawing. The

board will be a composite unit consisting of Two Plates

of ACM (Aluminum Composite Material), material

specifications as per clause 17001.3. The top most plate

will be of 3mm ACP in diamond shape of 600x600 mm

size, riveted with MS angle iron frame of 25mmx 25mmx

5mm size on back on edges. The Lower plate will be of

4mm ACP of 1100x 300mm size riveted with MS angle

iron frame of 25mmx 25mmx 5mm size on back on

edges. Riveting of all the sheets over angle and flat iron

frame will be done neatly to have plain surface on one

side. The angle iron frame of Both the plates will be

welded to a 75mm x 75mmx 6mm Mild steel post at

Centre and this post will be embeded in cement

concrete M15 grade block of 450x 450x 600 mm below

ground level. The height of the bottom of the lower plate

will be 1200 mm from normal ground level. The spacing

between the diamond shaped plate and Lower Plate is

kept 150 mm. MMGSY logo, letters and numerals on the

ACM should be made up of Retro Reflective sheeting of

Type-1 AEGP Class-A grade as per the latest MORD

section 1700 and IRC 67-2012 specifications. Al the

section of the frame and posts shall be painted with

primer and two coats of epoxy paint. The design,

painting and lettering shall be done as per the MMGSY

Logo sign Design and as directed by Engineer in-

charge. A warranty for 5 years for the Retro reflective

sheeting for Type-1 Class-A from original manufacturer

shall be submitted by contractor.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

25 MMGSY Project Information Board: Providing and fixing of 1.00 8713.27 No.

typical PMGSY Project informatory sign board with Logo as per

1700 of MORD specifications and drawing. The board will be a

composite unit consisting of Three Plates ACM (Aluminum

Composite Material), material specificaitons as per clause

17001.3. The top most plate will be of 3mm ACM in diamond

shape of 600x 600mm size, riveted with MS angle iron frame of

25mmx 25mmx 5mm size on back on edges. The middle 4mm

ACM plate of will be 1220x 150mm size riveted with MS angle

iron frame of 25mmx 25mmx 5mm size on back on edges. The

main 4mm ACM lower most plate will be 1500mmx 600mm

size, riveted with MS angle iron frame of 25mmx 25mmx 5mm

size. Riveting of all the sheets over angle and flat iron frame will

be done neatly to have plain surface on one side. The angle

iron frame of lower most plate and flat iron frame of the middle

plate will be welded to two nos. 75mm x75mm (12 SWG) sheet

tubes posts placed at 1125mm apart centre to centre. the top of

the middle plate will be flushed with the top of 75mm dia

medium steel tube posts and these posts will be embeded in

cement concrete M15 grade block of 450x 450x 600mm below

ground level. The height of the bottom of the lower plate will be

1200mm from normal ground level and the bottom of the

middle plate will be 100mm above the top level of the lower

most plate. the diamond shaped plate mounted over flat angle

iron frame will be connected to middle plate by square steel

section of 47mmx47mm, thickness 12SWG having a spacing of

100mm between the diamond shaped plate and middle plate

and this square section will be riveted to the bottom point of the

diamond shaped plate. MMGSY logo, letters and numerals on

the ACM should be made up of Retro Reflective sheeting of

Type-1 AEGP Class-A grade as per the latest MORD section

1700 and IRC 67-2012 specifications. Al the section of the

frame and posts shall be painted with primer and two coats of

epoxy paint. The design, painting and lettering shall be done as

per the MMGSY Signage Guide and as directed by Engineer-In-

charge. A warranty for 5 years for the Retro reflective sheeting

for Class-A respectively, from original manufacturer shall be

submitted by contractor.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

26 Cat Eye / Road Stud / RPM: Supplying of 1200.00 326.23 No.

Molded Twin Shanks Raised Pavement

Markers made of polycarbonate and ABS

moulded body and reflective panels with micro

prismatic lens capable of providing total internal

reflection of the light entering the lens face and

shall support a load of 13635 kgs. tested in

accordance to ASTM D 4280 Type H and

complying to Specifications of Category A of

MORTH Circular No RW/NH/33023/10-97 DO

III Dt 11.06. 1997. The height, width and length

shall not exceed 20 mm, 130 mm and 130 mm

and with minimum reflective area of 13 Sqcm on

each side and the slope to the base shall be

+/- 5 degree. The strength of detachment of the

integrated cylindrical shanks, (of diameter not

less than 19 +/- 2 mm and height not less than

30+/- 2 mm) from the body is to be a minimum

value of 500 Kgf. Fixing will be by drilling holes

on the road for the shanks to go inside, without

nails and using epoxy resin based adhesive as

per manufacturers recommendation and The

color of the marker should be as per the IRC 35-

2015 and as directed by Engineer-in-charge.

27 Excavation for foundatiuon upto 1.5 m depth 661.00 241.79 Cum

incl. Sorting out & stacking of useful material

& disposing of the excavated stuff upto 50m.

Lead. (B) Dense or hard soil.

28 Providing and filling in foundation with 124.10 3245.56 Cum

ordinary cement concrete M- 100 mix and

providing necessary vertical pin headers

including formwork, vibrating, ramming and

curing complete.

29 Providing and filling in foundation with 1085.00 3615.61 Cum

ordinary cement concrete M- 150 mix and

providing necessary vertical pin headers

including formwork, vibrating, ramming and

curing complete.

30 Providing TMT Bar FE 500D reinforcement for 1867.00 76.21 Kg.

R.C.C. work including bending, binding and

placing in position complete upto floor two

31 Providing and laying Weep hole in abutment 500.00 82.57 No.

and return by using PVC. pipe of 100 mm dia

including laying in proper grade and joining

complete etc as per details specification.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

32 Providing and laying - Fitter Media 600mm 830.00 1180.34 Sqmt

thick directed at the back of abutments,

returns and wing walls as per detailed

specifications.

33 White washing with lime on wall surface (two 952.00 12.41 Sqmt

coats) to give an even shade including

thoroughly booming the surface to remove all

dirt, dust; mortar drops and other foreign

34 Supplying and fixing reinforced concrete 75.00 649.92 Rmt

heavy duty non-pressure pipes with collars for

culverts carrying heavy traffic as per IS 458-

1991 specifications including setting the pipes

in C.M. 1:2 watering and laying (to level or

slopes) of class NP3 of following internal

daimeters. (i) 300mm dia.

35 Box cutting the road surface to proper slope 2565.00 102.93 Cum

and camber for making a base for road work

including removing the excavated stuff and

depositing on the road side slope as directed.

36 Scarifying gravelled macadam or bitumen 12375.00 39.62 Sqmt

mcadam surface 6 cm to 10 cm. depth

including stacking useful materials on road

side and disposing off remaining stuff.

37 Earthwork in cuting in all sorts of soil and soft 3234.00 242.31 Cum

murrum including conveying and spreading

the stuff, embankment as and where directed

within 200 meters from the end of the cutting

with all required lead and lift.

38 A Providing and erecting a Single "W" metal 200.00 4647.53 Rmt

beam crash barrier comprising of 3 mm thick

corrugated sheet metal beam rail, 70 cm

above road / ground level, fixed on ISMC

series channel vertical post, 150 x 75 x 5 mm

spaced 2.0 m centre to centre, 1.8 m high,

m Below ground / road level, all steel parts

and fitments to be galvanised by hot dip

process, all fittings to conform to IS:1367 and

IS:1364, metal beam rail to be fixed on the

vertical post with a spacer of channel section

150 x 75 x 5 mm, 330 mm long , Fixed in M-

25 Grade Concrete 1.1 x 0.5 x 0.5 complete

as per clause 810. Reflector type-4 class - B

High Intensity grade at Every Post as per

drawing complete as per clause

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

39 Dismentalling the existing structure including 5.00 5050.00 No.

removing & stacking the dismentalled

materials as and where directed including

Dismental Credit.

40 Excavation for foundation in sand, gravel, clay 2398.00 486.77 Cum

soft soils and murrum etc. including shoring,

strutting dewatering as necessary and

disposing of the excavated stuff as directed.

(A) Depth upto 3.0 M. and lead upto 100m for

41 Providing and casting in-situ controlled 1404.00 4549.01 Cum

cement concrete M-250 for RCC raft and cut

off walls including shuttering, laying, vibrating,

ramming, and curing complete.

42 Providing and casting in situ controlled 244.00 5423.04 Cum

cement concrete M - 300 for R.C.C. solid

slab including centering, scaffolding, curing &

finishing comp.. (including Apoxy Painting of

Exterior Surface)

43 Providing & casting in situ controlled cement 170.80 5547.18 Cum

concrete M - 400 for average 100mm. thick

Wearing coat laid as directed including

tamping, vibrating, finishing, curing, and filling

in joints with bitumen complete.

44 Providing and casting in-situ controlled 24.90 4814.49 Cum

cement concrete M-250 for kerb / kerb blocks

including formwork, curing and finishing

45 Providing and casting in-situ controlled 393.00 5246.75 Cum

cement concrete M-300 for approach slab

including formwork curing and finishing

46 Providing and placing in position FE 500D bar 123.10 73217.53 M.T.

reinforcement for following items including

cutting bending hooking and tying complete

as per detailed drawing.

47 Providing and fixing post and pipe railing as 275.00 1202.80 Rmt

per detailed drawing including 3 coats of

painting to steel works complete.

48 Provding P.V.C. 100 mm diameter water 56.00 159.37 No.

spouts including necessary iron gratings as

per drawings.

49 Providing Pre-moulded asphalt filler joints as 65.50 702.12 Sqmt

per drawings.(A) 12mm

50 Providing and laying rubble for appron (each 169.00 1041.05 Cum

stone weighing not less than 40 Kg.) including

packing & filling in the interestices with quarry

51 Providing and filling sand behind abutments 2350.00 458.14 Cum

and between returns in layers as directed.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

52 Providing Diversion of road 3.75mt Width for 250.00 8040.83 Rmt

Structure by Providing & spreading Earth

Work, 200mm Unscreen GSB , 200mm GSB-

II and 20mm MSS. The Length of Road is

Depend onsite condition etc as directed by

Engineer in Charge. (The diversion shall be

maintainance & Repair in all weather Season.

No Any extra Payment shall be made for

maintenace & repair work of Diversion)

Total Rs.

Rupees Nine Crore TwentySix Lakh FiftyNine Thousand One Hundred TwentyTwo and Paisa

Fourteen Only

I / We / am/are willing to carry out the work at ________________________________% above / below

percent (should be written in figure and words) of the estimated rates mentioned above. Amount of

my/our tender Works out as under.

Estimated Amount Estimated Amount

put to tender Rs. _________ put to tender Rs. _________

Deduct_______% below Add_______% above

Net Rs._________ Net Rs._________

in words ___________ in words ___________

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.

G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in

R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

5 Dismentalling of Credit materials amounting of Rs.1407145.25 must be recovered from

Contractor's respective R.A. Bill.

Signature of Contractor

Dy. Executive Engineer Executive Engineer

Panchayat R.&B. Sub Division Panchayat R.&B.Division

Sanand Ahmedabad