CA NO. CWE BLY /GE(W) / 09 OF 2022-2023 REPAIR TO ROAD IN CERTAIN AREAS UNDER AGE B/R-II OF GE (W) BAREILLY

Amount

M&L for repair to pot holes any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) and making good by applying tack coat with bituminous primer VG-10 @ 5 Kg per 10 Sq m, putting in premix bituminious macadam, well rammed and sealed with premixed sand seal coat (9.8 kg of binder with 0.09 Cum of stone chipping, 6.3mm size), again well rammed (including supply of premixed macadam, binder and chipping) depth of potholes exc 30 mm complete all as specified and directed. Note: Pot holes shall be marked and checked by Engr-in-Charge for 100% quantity before commencement of work and shall also be entered in MB with reference to permanent objects before starting carpeting work.

M&L for Preparing of black top bituminous surfaces by brushing with brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with air pressure through air jet using air compressor to remove all loose dirt etc incl removing mud etc to a distance minimum 1.50m from edge of road and applying evenly a tack coat of bituminous primer using paving bitumen (VG-10) at the rate of 5 Kg per 10 Sqm of road surface by sprayer operated hot pressure mechanisum, supplying, laying, spreading 30mm consolidated thickness of semi dense asphaltic bituminous concrete carpet (VG-30) with 0.406 cum crushed and graded coarse aggregates with design mix formula with bitumen not less than 5.5% using paver with mechanical paver all as specified in clause device for automatic leveling and profile control within the specified tolerance as mentioned in SSR Part-I , rolled and consolidated to required camber and gradient with power roller for uniform smooth surface complete all as specified and directed.

Supplying, laying, spreading upto 75mm or less consolidated thickness of premix bituminous macadam carpet filling in depression (using 20mm graded stone aggregate) in single layer using mechanical paver using bituminous binder (VG-30) at the rate 4% by weight of total mix, laid/rolled and compacted/consolidated to required camber and gradient with 8 to 10 tone power roller to a uniform smooth surface complete all as specified and directed Note for item No's. 2 & 3: Based on job mix formula, in case the binder content (i.e. Bitumen) is less than the contents specified against these items then a minus adjustment @ Rs 52/- per kg of bitumen (less consumed) shall be applied on the quoted rate of contractor against these items, hence the quoted rate of contractor shall be reduced based on less content of bitumen required as per job mix formula. However, no price adjustment on plus side shall be made for increase of quantity of bitumen in case of required as per job mix formula.

M&L for applying evenly a priming /tack coat with paving bituminous VG-10 grade at 10Kg/10 Sqm complete all as specified and directed.

Material and labour for painting lines, dashes, arrows letter, marking etc of 3mm thick film on new surface or previously treated road surface with hot applied retro-reflective thermoplastic road marking paint (white/golden/yellow) conforming to MORTH (Clause 803.4) all as specified with 8% glass beads using special applicator machine with heating arrangement upto 160°C including cleaning and drying the existing road surfaces to ensure dust, oil, grease and moisture free surfaces before applying the paint complete all as specified and directed. Make – Automark/Asian Paint/Berger

S&F in repair metal tubular delineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45/50mm dia mild steel pipe of 600mm height, duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector redium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4(150x150x300mm) type B-1 complete all as specified and directed.Make – Greenlite Pvt Ltd/ 3M India Ltd /Dark Eye.

S&F in replacement cats eye solar reflective of dimensions 100mm x 100mm x 20mm of impact resistance metal body alloy with Amber/red/ white reflective panels and fixing the same on road surface by applying approximately 100gm Epoxy mixture and placing the cats eye without applying excessive pressure and additional fixed with 12mm dia and 120mm long zinc plated steel nail at the centre of cats eye complete all as specified and directed. Note: Model No DA-972 of make Dark Eye or equivalent model manufactured by 3 M India Ltd, Greenlite Pvt Ltd .

S&F in replacement two way reflective Solar road studs (Cats eye) of dimensions 125mm x 125mm x 25mm (shank 60mm) of high efficiency mono-crystalline solar panel 2.4V/0.30 Watt, one Ni-Mh of Ni-cd rechargeable battery (1.2V /1600MA), six super bright LEDs with 10000 to 18000 mcd (Millicandela) , view distance upto 1000 meters, flash rate 2 Hz and bearable weight of solar studs (10 Tone approx) with impact resistance aluminium alloy body with yellow/ red/ white/ green reflective panels and fixing the same on road surface by applying approximately 100 gm epoxy mixture and placing the cats eye without applying excessive pressure and fixed with 12mm dia and 120mm long zinc plated steel nail at the centre of cats eye complete all as specified and directed. Note : Model No DHRUV manufactured by M/S Dark Eye or equivalent model manufactured by 3M India Ltd, Greenlite Pvt Ltd.

Supply and fixing for Speed road bumps manufactured by HDPE/PE material highly resistant to serve impact and harsh weather condition including two way reflective studs are clearly visible to the motorist during night hours fixed with appropriate epoxy and 4 or 6 Nos nail complete all as specified and directed.( Model No. DA 1006, design patent no. 206431 and wt 2160gm, make Dark eye or any other make as approved by GE.)

Note : Tenderers may note that amount of credit Rs 8,750.00 will be deducted from the total amount arrived, at the time of Acceptance of tender.

M/S Om Builders

M/s J P Bhatia

TEAM ACC INFRABUILD PRIVATE LIMITED

M/S AGARWAL CONTRACTORS