Special repair of Bldg No P-698 (10 x single JCOs accn) in Army area Jodhpur

Amount

WATER Proofing & Tanks S F as in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified cap 500 ltr incl taking out old PVC/RCC tank & removal away from site

All as per item No 01 above but cap 1000 ltrs

S & F as in repairs 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s .) all as specified & directed.

Taking down steel water tubing and connections, including cleaning for re-fixing or remove to site all as specified. (a) 15 mm dia

All as per item No 4 above but 20 mm dia

All as per item No 4 above but 25 mm dia

S & F GI Tubing medium grade fixed to walls ceiling or laid in floor with all fittings for the following dia of pipes. (a) 15 mm dia

All as per item No 7 above but 20 mm dia

All as per item No 7 above but 25 mm dia

Demolition of RCC Roofs, floors (other than ground floors) , beams, staircases, landing, chajjas & similar suspended work

M&L for MS TMT bars 10mm dia and over cut to length,bent to shape required incl cranking bending spirally for hoping facia,chajjas and binding with and incl mild steel wire (annealed) not less than 0.90 mm dia or securing with clips

All as per item No 11 above but 6 to 8 mm dia

All as per item No 11 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Formwork to soffits of suspended slab,landing & similar work n.exc 200mm thick (horizontal or sloping

All as per item No 14 above but to sides and soffits of beams, lintel and etc

Formwork to chullah hoods, chajjas, troughs & similar items including edges

M&L for M-25(20mm graded stone agg) design mix RCC in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.

M&L for M-25 (20mm graded stone agg) design mix RCC in beams, cantilevers, bressummers; lintels over 1.5m span

M&L for M-25 (12.5mm graded stone agg) design mix RCC in Chhajjas

Demoltion of cement cocrete padding of water proofing treatment from roof pading taking down bituminous polythene sheets plaster etc overall thickness n.exc 200mm , cleaning of concete surfaces by wire brushres scrubbing down water and removing the dust debris etc. to a distance 50 mtre but n.exc 250 mtr from the site

M&L Plain cement concrete 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as over roof for making good depression/ undulation to make the existing as filling in depression of roof slab.

M & L Plain cement concrete 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in roof kerbs rounded or chamfered on edges as specified.

M & L Plain cement concrete 1:3:6 type C1 using 20mm graded crushed stone aggregate as in coping to parapet walls including necessary form work complete all as directed.

M&L for carring out water proofing treatment for roof in following stages :- (1) M&L for rendering 10mm thick in CM 1:4 mixed with integral water proofing liquid all as per mfr inst over conc surfaces finished even and smooth w/o using extra cement. (2) First coat of bitumen primer confirming to IS 3384 @0.300 Kg/Sqm over plastered surafces (3)Second layer of 3 mm thick APP modified polymeric membrane with centre core of Single non woven polyster reinforcement & having weight 3 Kg/sqm with mineral gravel finish on top complete laid over Roof slab/padding surfaces over a coat of Bitumen 85/25 applied @ 1.20 kg/Sqm complete all as specified & directed at site.

Demolition of RCC as in Downward fascia , Roof projectios, sunshades suspended roof slans railings etc complete.

M&L for Mild steel framed work as in guard bars brackets & supports for sunshades roof slabs etc for jacketting around columns,as in railings ,supports for cooler platforms & the likes etc using MS angle iron, sq pipes flat iron , MS plates & bolts etc complete all as specified & directed incl necessary welding in position etc.

Taking down carefully cement conc /spalled out concrete from RCC roof projections, cilinigs ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc complete.

M&L for fixing 12 mm dia TMT bars by way of stitching ( welding ot tieing with existing reinf) incl drilling holes etc & securing ends in walls etc complete.

M&L for cleaning the existing reinf of slabs , chajjas etc & applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & throughly cleaning the surface.

M&L for applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture LATEX POWER mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack.

M&L for 15 -20 mm thick rendering in CM 1:1:2 using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand ofover the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat.

M&L for 5 mm thick rendering in CM 1:3 & finishing the surface even & smooth w/o using extra cement

M&L for 10-15 mm thick rendering in CM 1:3 over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & smooth complete all as directed at site

S&F GI chicken wire mesh of 0.71 mm dia wire & 12 mm mesh size fixed with nails & screws around RCC chajjas/fascias etc. Internal Plastering & Ext Plastering Pointing

Taking down cement plaster on brick or stone walls, tiling & ceilings including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified

M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 all as specified.

M&L 15 mm thick rendering on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished even and smooth without using extra cement in CM 1:6.

M&L for 15 mm thick rendering in CM 1:4 over stone masonry surfaces & finished even & smooth w/o using extra cement using integral water proofing liquid as per mfr instructions .

M&L for 10 mm thick rendering in CM 1:4 over conc surfaces finished even & smooth without using extra cement as in ceilings

M&L for 10 mm thick rendering in CM 1:6 over stone masonry surfaces & carrying out Rough cast plaster with stone grit in over it all as specified in SSR & as directed at site .

Surface Finishes Complete removal of existing treatment from walls

M&L for prep of new ceiling surfces & applying three coats of white wash complete .

M&L for prep of old ceiling surfces & applying one coat of white wash complete .

M&L for prep of old previously treated surfaces & applying one coat of white wash on wall complete .

M&L for prep of new surfces plastered /pointed & applying three coats of white wash on wall complete .

M&L prep of plastered surfaces & applying one coat of Birla/JK wall care putty to reone all depressions etc & to obtain a smooth surfaces complete all as specified & directed.

M&L for applying 2 coats of Oil Bound distemper over putty applied surfaces . The OBD shall be in one or more colours/ shades all as directed at site.

M&L for prep of new surfces plastered /pointed & applying two coats of cement base paint over a coat of suitable primer complete .

M&L for prep of old conc / masonry surfaces & applying one coat of cement base paint

Demolition of PCC as in flooring, plinth protection etc n. exc. 15 cm thick complete.

M&L for coloures Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match .

M&L for light coloured Vitrified Ceramic tiles 9-10 mm thick area of each tiles not exc 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L for dark coloured Vitrified Ceramic tiles 9-10 mm thick area of each tiles not exc 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L for 50 mm thick Cement concrete type C1 -1:3:6 using 20mm graded stone agg as in plinth protection & finishing the surfaxe even & smooth w/o using extra cement

M&L for 25 mm thick Cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregate) as in sub floors etc including finishing the surface even & rough to receive screeding.

M&L for 15 mm thick Screed bed or bedding layer of CM1:4 for laying floor finishes.

M&L for 10 mm thick rendering in CM1:3 over stone masonry surfaces & finished even & rough to receive tiles.

M&L for coloured Glazed ceramic tiles in vertical surface 300x450 mm size 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match . Note :- The tiles shall be in one or more colour patterns incl highlighters all as approved & directed at site .

M&L for Machine cut kota stone slab flooring 18-20 mm thick over 15mm thick cement screed bed in CM 1:6 laid and jointed with grey cement clurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified.

All as per Item No 60 above but as in skirting, dado over 15mm thick rendering in CM (1:6) and polishing complete.

All as item No 60 above but as in treads/risers of step in single piece of stone including bullnose half round to edges of treads etc.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

M&L for 18-20 mm thick yellow Jaislmer marble stone machine cut as in skirting & risers & other vertical surfaces complete over 10 mm thick rendering in CM 1:3 complete

M&L for 18-20 mm thick yellow jaislmer stone mirror polished laid in flooring as in borders or corner stones etc as per approved pattern in flooring over 15 mm thick screeding in CM 1:4 complete all as directed & specified.

S&F 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed fixed as in repairs

S&F 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed fixed as in repairs

S&F of bib taps, fancy type, cast copper alloy chromium plated with fancy type handles screwed down ,screwed for iron pipe or for brass ferrule 15mm bore in repair.

S&F 15mm bore stop valves, cast copper alloy, chromimum plated with fancy type handle with long shank & cup (concealed type), screwed down, high pressure, screwed both ends for iron pipe or for unions & fixed

S&F 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly-nuts, screwed for iron pipes & fixed

S&F in repairs urinal, half stall type flat back white colour fixed incl waste pipe & coupling.

S & F for Brass chromium plated shower rose 125 mm size for 15mm bore pipe.

S&F stop valves cast copper alloy (ISI marked) screwed down high pressure with crutch or butterfly handle screwed both ends for 15mm bore of iron pipe or union and fixed in repair complete all as directed.

S&F stop valves cast copper alloy (ISI marked) screwed down high pressure with crutch or butterfly handle screwed both ends for 20mm bore of iron pipe or union and fixed in repair complete all as directed.

S&F as in repairs light coloured (Ivory) vitreous china, wash hand basin of size 550mm X 400mm flat back with pedestal Including bracket , CP waste coupling ,chain and plug, 2 Nos PVC connection 15 mm size & 45-60cm long & PVC Waste coupling & flexible waste pipe complete all as directed.

S&F vitreous china squatting Pan, Orissa Pattern of size 580X440mm white (ISI marked) with integral foot rests and cast iron `P' or `S' trap front or back inlet Including flush pipe 40mm dia HDPE pipe etc, fixed in repairs Including connection to trap etc and provision of cement concrete bedding and making good to floor completely all as directed.

S&F vitreous china wash down water closet pan (Pedestal pattern) white connected to drain or out going pipe and flushing pipe complete as in repair including PVC sheet cover closed recesed type complete all as specified and as directed.

Supply and fixing in repair PVC valve less symphonic action type flushing cistern 10 ltrs capacity low level with inlet, ball valve, float and handle Including bracket fixed complete all as specified and as directed.

S&F in repair PVC waste pipe for WHB/Urinal complete all as specified and as directed.

S&F in repair 15mm bore PVC connection 600mm long best quality with PTMT nuts complete all as specified and directed.

M&L for 18-20 mm thick Black granite stone as in cooking platforms , slabs for oval type WHB,sinks etc & the likes complete laid over 15 mm thick cement sand screed in CM 1:4 incl mirror polishing complete & providing necessary holes for gas pipe / water supply pipes etc .

M&L for rounding of the edges of stone slabs as in cooking platforms , treads of steps shelves & cills etc all as directed at site.

S&F MS chromium plated peg set of five fixing with wall complete

S&F Corner shelf complete

S&F Soap Dish complete

S&F tubular towel rail 20mm dia brass chromium plated `D' type 60cm long with bracket and fixed complete all as directed .

S & F of Swivel shower of PTMT any colour for fixing with 15mm pipe (Minimum weight 40gms)

Dismentaling of cast iron soil waste & vent pipes 100 mm dia incl all fittings etc complete.

Dismentaling of cast iron soil waste & vent pipes 75 mm dia incl all fittings etc complete.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls

S&F 75 mm bore PVC (SWR) bends any radius with oval acess door

S&F 110 mm bore PVC (SWR) bends any radius with oval acess door

S&F 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal with oval acess door

S&F 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal with oval acess door

S&F 110mm PVC (SWR) WC connector with lip ring

S&F UPVC Vent Cowl 75 mm bore

S & F PVC (SWR) floor trap, plain with grating including jointing with solvent cement for 75 mm bore pipes

S&F PVC (SWR) gully trap 125 mm size setting and jointing with solvent cement

Supply and fixing in repairs PVC coated decorative type curtain rod of MS pipe 22 to 25 mm dia as per sample.

Supply and fixing of purpose made brackets trade pattern for decorative type curtain rods suitable for holding 22 to 25 mm dia as per sample as in repairs.

Supply and fixing of decorative fincals (round type with mirror optic finish) trade pattern for decorative type curtain rods suitable for 22 to 25 mm dia curtain rods as per sample as in repairs.

Taking down chaukhats with shutters (without taking off shutters from the frames) area nexc 1.50 Sqm & removal to site.

Taking down chaukhats with shutters (without taking off shutters from the frames) area exc 1.50Sqm but nexc 4 Sqm

Taking down Shutters of any description area exc 1 sq. m each but nexc 2 Sqm each

Taking down steel windows/ vents & removal to site.

M&L for Pressed steel frames for doors 165 x 60mm size fabricated with 1.00mm thick sheet with rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

M&L for Pressed steel frames for doors size 105x60mm with one rebate including necessary fixing lugs, hinges, lock strike plate, etc omplete, as specified,supplied and fixed

M&L for PCC 1:3:6 type C1 using 20 mm graded stone agg as in filling under pressed steel door frames & hold fast blocks etc complete

S & F 35mm thick flush shutter solid core construction with partical board core and plywood face panels, commercial type on both side complete all as specified.

S&F 35mm thick 2nd class glazed and skelton shutter, open rebated and prepare to recieive glass, gauge etc (without sash bars)edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass or gauge etc all complete.

S&F factory made PVC shutter 30mm thick (style)consisting of frame made out of MS tube for top and bottom rails. MS frmae shall be covered with heat moulded plain color PVC channel having a PVC sheet for top rail of 20mm width width stuck in side with solvent cement for stiles and plain color PVC sheet for top rail lock rail on other sideand as gap insert for top rail and bottom rail. Paneling of plain color PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with slovent cement complete all as specified.

M&L for Solid PVC Door Frame of size 50mm x47mm made out of 5mm wood grain printed PVC sheet incl all edges printed to match the shade reinforced with M.S. Sq tube, suppling & fixing in opening as per spec & drawing

S & F for Anodised aluminium barrel tower bolts, 150 mm size stove enamelled black, with bright bolt and fixed

S & F Aluminium alloy, anodised, sliding door bolt 300mm long size with hasp, staple (bolt type) and fixing clips of sheet,cast orextruded sections& fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F Mild steel Butt hinges, medium weight, cold rolled mild steel, and fixed 100 mm size

S&F Stainless steel butt hinges 100mm size fixed with steel nut blots in PVC door frames & PVC shutters.

S&F 125 mm size single action spring hinge bright finished body of mild steel with steel wire spring heavy duty all as per the sample of Make YANE / EVERBRITE or equivalent complete all as spd & directed.

S&F 150mm mild steel barrel tower bolts, stove enameled black, with bright bolt & fixed

S&F Mild steel pressed handles, oval type, stove enameled black of size 150mm

S&F 300mm Mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts & nuts, four on bolts plate & two on staple plate & fixed

S &F Anodised Aluminium handles 150 mm size D type with plate

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F of stainless steel wire cloth 0.36 mm nominal dia of wire & avg width of appertuer 1.40 mm fixed to Anodised aliminium framework of windows / vents & door shutters etc ccomplete.

S&F 3 mm thick plain Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

M&L for prep of new steel surfaces & applying 2 coats of syn enamel paint over a coat red oxide primer

M&L prep of preprimed surfaces of steel windows & applying 2 coats of syn enamel paint .

M&L prep of new wooded surfaces & applying 2 coats of syn enamel paint over a coat of pink primer.

M&L prep of old painted previously treated wooded surfaces & applying 01 coat of syn enamel paint .

M&L prep of old painted previously treated steel surfaces exc 10 cm width or girth & applying 01 coat of syn enamel paint .

Taking out from position framed woodwork as in cupboards/cabinets etc with all fittings ,shutters, shelves, drawers etc in any position fixed in walls or floors & removal of the rubbish outside MD land all as directed at site for overall sizes exc 0.50 sqm but nexc 1.50 sqm & depthd nexc 60 cm complete.

M&L for 18/19 mm thick pre laminated particle board , exterior grade, prelaminated both sides with decorative choice , fixed with screw to timber frame work

S&F plain fillets 2nd class H/W rectangular, square or triangular section sec area exc 13 sqcm but n exc 25sqcm , wrought etc all as specified

S&F continuous (Piano) hinges , mild steel, bright finish or electrgalvanised 30mm wide flap

S&F of Hasp & staple of size 100mm, safety type, brass with mild steel hinges pin including bolt to hinges plate & fixed with screw

Supply only integral Liquid water proofing compound ISI Marked

Demolition of stone salbs laid bedded & jointed & pointed in CM

M&L for 75 mm thick Cement concrete type D - 2,1:4:8 (40 mm graded stone agg) as in sub base to floors incl well compacting & laid to levels all as directed.

S&F machine made precast cement concrete blocks (Interlocking pavers ) rubberised finished coloure of 60mm thick top layers of anti abrasive material laid over 50mm thick sand cushion. The interlocking tiles joint will be filled with fine sand.

S&F machine made precast cement concrete Kerb stone blocks of approved shape size using Cement concrete 1:3:6 type C1 (20mm graded stone agg) laid alongside paths /hardstanding jointed & pointed in CM 1:4 all as directed by Engr-in-Charge

Demolition of stone masonry built in cement mortar

M&L for jodhpur type squared rubble regular coursed stone masonry built in CM 1:6 complete

Extra over Jodhpur type stone masonry for hammer dressing to face beds & joints with max depression froom a straight edge not exc 20 mm

S&F 5 cm thick Sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed cement mortar 1:4. complete

M&L for Cutting chases in stone walls , pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or sunshades, shelves, lintels, etc.; exc 10 cm but nexc 20 cm

M&L for precast cement concrete solid building blocks type B1 1:2:4 (20mm graded stone aggregate) or slabs 10cm thick (with plain or interlocking joints as directed) setting in 1:4 cement mortar, complete, in walls all as directed.

Taking down carefully copper/aluminium point wiring for light, fan, bell socket power slocket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose etc complete

Point wiring complete with 1.5 sqmm, single core, multi stranded, copper conductor, PVC (FR), insulated, unsheathed cable, confirming to IS-694, 1100 volts grade, ISI marked (class V conductor), in and including PVC concealed conduit (MMS), ISI marked not less than 20mm, with accessories fixed on surface of wall/roof/ceiling etc and including sunken pressed steel terminal boxes in wall but including 3mm thick plastic laminated sheet top cover (ISI marked hylem sheet Make Anchor and 1.50 sqmm PVC insulated unsheathed stranded copper conductor for common earth and connecting to earth dolly material and labour for :- (a) One light point controlled by one, one way switch

All as per item No 151 above but One fan /Exhaust fan, point controlled by one way switch.

All as per item No 151 above but One socket outlet 3 pin 6 Amps on same board

All as per item No 151 above but One socket outlet 3 pin 6 Amp on independent board

All as per item No 151 above but with 2.5 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board .

S&F switch flush type single pole one way 6 Amp ISI Marked

S&F switch flush type single pole one way 16 Amp ISI Marked.

S&F socket out let , 5 pin , 6 Amp FT.

S&F socket out let , 3 pin ,16 Amp FT. ISI Marked

supply and fix socketed stepped type electonic fan regulator flush type , ISI Marked.

S & F Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body

Fixing only LED tube light fitting three colour, 20/22 watt,4000 lumens, complete with all accessories etc internally pre-wired , including LED lamp-1No made of connectiong up with , multistranded copper conductor of size 1.00 sq mm flexible cable Note: LED tube light fitting 20/22 W shall be issued under Sch 'B' free for fixing.

S&F insulated Batton lamp holder metal cased body of brass with back plate suitable for batton fittings with 7/9 watt LED Lamps. Note: LED Bulb 7/9 watt shall be issued under Sch 'B' free for fixing.

M/L in repairs sub main wiring with 6.00 Sq mm single core multistrandred copper conductor PVC insulated and unsheathed cable passing through PVC concealed conduit and making good the distrurbed surface of wall inc 6 Sq mm single core copper conductor cable PVC insulated and unsheathed cable as earth wire. Note :- Two runs of cable 6 Sqmm and One run of 6 Sqmm shall be measured as unit length.

S&F Prewired distribution board in sheet metal with 200 Amps rated copper bus bar Confirming to relevant IS.SPN 8 way, Make;-Legrand/ABB/Havell's Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface.

S&F Prewired distribution board in sheet metal Prewired when MCB to be used with 200 Amps rated copper bus bar Confirming to relevant IS TPN 4 way, Make;-Legrand/ABB/Havell's Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface.

S&F MCB Single pole 5 to 30 Amp, 10 kA, ISI Marked.

S&F MCB Double pole RCBO 40 Amp, 100mA, ISI Marked.

S&F MCB SPN 63 Amp, 10 kA, ISI Marked.

S&F MCCB TPN 63 Amp, 10 kA, ISI Marked.

Earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate no.3connected to Earthing test point all as specified or indicated including testing on completion Note : (i) Rates are deemed to be included for necessry earth work ,PCC pit , RCC cover etc complete. (ii) Earth lead shall be up to 7.5 Mtr and rates are deemed to be included for GI pipe 15mm Light grade upto 7.5 mtrs for protection of earth wire 4.0 mm dia.

Fixing only of street light fitting 25/30 watt LED , IP-65 protection, single peice pressure dia cast aluminium alloy housing high grade powder coated finish with heat resistant toughned clear glass cover for lamp and contror gear compartment with high voltage surge protection device, Prewired including GI pipe mounting bracket made to shape with and including MS clamp of flat iron 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable complete all as specified . Note: LED Street light fitting 25/30 W shall be issued under sch 'B' free for fixing.

BEYLIM INFRA

Harsh Enterprises

Jai Doulat Construction Co

M/S KAUTILYA GARG

Pioneer Enterprises