REPAIR/CLEANING OF SEWAGE LINE/MANHOLES, SEPTIC TANK/SOAKAGE WELL/FITTER BED/SEWAGE SUMP AND SUMP OF STP AND DAY TO DAY MAINTENANCE AND PETTY B/R REPAIRS AT MISA CAMP UNDER GE (S) TEZPUR

M& L for Cleaning of cook house /storm drain or Drain of any description by rodding/manually , to clear the sludge/blockage inside the Drain and Hume pipe and will be flushing with water to drain out bloackage etc. including removing Drain cover and re- fixing the same after cleaning complete all as specified and as directed.

M&L for Cleaning of bore underground sewerline from any type of trap (WCs/Gully trap/floor traps/C pipes/Nahani traps/Bathrooms etc) to 1st manhole (including trap & manholes by taking off manhole covers and re-fixing the same after cleaning) of any description, underground and at any depth by removing any type of blockage including de-sitizig and de-chocking (Sludge water shall be diposed off at authorized dumping site declared by local administration outside MD land complete all as specified & directed. Note:- (a) The complaints shall be attended on the same day and complaints slips duly signed by the user will be deposted back to the JE(Civil) on the same day (b) A penalty of Rs 200/- per day per person will be levied in case of absence of any of safawala or helper (c) A pucca bound register shall be maintained for this purpose which shall always be kept is custody of JE Civil indicating date and time of complaint informed and rectified respectively (d) Five complaints will be count as Each Job for payment purpose.

M& L for Cleaning of septic tank/STP/open-sump including drainage system by blocking temporarily the inlet with approved wooden plugs and bailing/ pumping out water from septic tank/soak pit and scraping out sludge, organic matter /inorganic matter, soft /semi solid matter and removing to distance exc 50 m but n.exc 100 m from the starting point and filling into shallow pits n.exc 1.5 m deep and removal of wooden plugs and channeling the water back complete all as specified and as directed. Note :- (a) Net volume of sludge shall be measured after dewatering by depositing in a shallow pit. The depth of sludge is taken by rodding after the sludge is dewatered and dried or reducing 20% from bulk volume.

Demolition and breaking up drain pipes 150 mm dia unserviceable (salt glazed stone ware, AC or reinforvced concrete, drain pipes) set in cement mortar complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches pillars etc. complete all as specified and directed

Demolition of plain cement concrete in ground floors and paving n exc. 15 cm thickness (below or above GL) complete all as specified and directed.

Demolition of re-inforced cement concrete of any description and in any position for manhole cover slab complete all as specified and directed.

Taking up or down PVC (SWR) pipes size 110/75mm dia from any position complete all as specified and directed

M& L for Cleaning of manhole including removal of sludge of any size and depth upto 0.75 Mtr complete all as specified and directed by Engr-in-Charge.

M& L for Cleaning of manhole including removal of sludge of any size and depth from 0.75 Mtr to 1.50 Mtr complete all as specified and directed by Engr-in-Charge.

M& L for Cleaning of manhole including removal of sludge of any size and depth from 1.50 Mtr to 3.00 Mtr depth complete all as specified and directed by Engr-in-Charge.

M& L for excavating in trenches n exc 1.5m wide and n.exc 1.5m depth for sewage line and manholes, drain etc and getting out in hard/dense soil complete all as specified and directed.

M& L for Returning, filling in,including spreading, levelling watering and well ramming in layer not exc 25 cm in soft/loose soil complete all as specified and directed.

M& L for Removing excavated surplus soil at a distance n.exc 50m and depositing complete all as specified and directed.

M & L Plain Cement Concrete 1:3:6 Type B2 using 40 mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed.

M & L TMT bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clip to Fe-410 incl fabrication complete all as specified and directed.

M & L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including form moulds, mitred/stopped ends etc complete all as specified and directed

M&L Cement Concrete type C2(1:3:6) using 40mm graded crushed stone aggregate 75mm thick as in Plinth Protection, etc. laid in alternate Bays, finished Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

M & L for 25 mm PCC 1:2:4 ( 20 m graded stone aggregate) as sub floor , sub base even and rough to recieve the topping layer as in sub base all as specified and directed

M&L Plain Cement Concrete type B-1, (1:2:4) (20mm graded crushed stone aggregate) as in Coping bed plate,hold fast etc,block benching,channeling slightly rounded or chamfered angle and throating including form work and finishing all exposed faces of cement concrete complete all as specified and as directed.

Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with, water etc complete all as specified and directed.

M&L Rendering 15mm thick in Cement Mortar 1:4 on Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and fair without using Extra Cement complete all as specified and as directed.

M&L Rendering (Internally) 10mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and Smooth without using Extra Cement complete all as specified and as directed.

M&L Rendering 5.0mm thick in Cement Mortar 1:3 on Concrete Surfaces of Ceiling, etc. finishing Plastered Surfaces Even and Smooth, without using Extra Cement. complete all as specified and as directed.

M&L brick work using sub class B brick (old size) curved or straight in plan exc 6 mtr mean radius in cm (1:4) complete all as specified and directed

Supply only integral water proofing compound

S&F PVC(SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in fioors,110mm bore complete all as specified and directed.

S&F PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to fioors ,75 mm bore .complete all as specified and directed.

S& F PVC (SWR) bend any radius, 110 mm bore ,with access door . including all necessary work complete all as specified and directed.

S& F PVC (SWR) bend any radius,75 mm bore ,with access door including all necessary work complete all as specified and directed.

S & F 75 mm bore PVC (SWR) junction single (Single'T') , equal or unequal .fixed to wall including all necessary work complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single (Single'T') , equal or unequal .fixed to wall including all necessary work complete all as specified and directed.

M & L DWCPE pipes 150 mm bore internal dia (ISI marked) laid in trenches, including all fittings & fixture jointed and tested complete all as specified and directed.

S&F Vitreous China Wash down Water Closet Pan (Pedestal Pattern) white with "p" or "s" trap front or back inlet including fixing Bolts with and excluding 10 litre capacity low level Flushing Cistern matching with water closet colour with inlet ball valve float handle and providing 32mm dia PVC flush pipe including plastic water closet seat with flat bottom cover (coloured) fixed with mild steel chromium plated or aluminium hinging device and making good disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down/out unserviceable WC Pan and connected Items, complete all as specified and as directed.

S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, a pair of Cast Iron Brackets duly painted including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed.

S&F Vitreous China White Squatting Pan ‘ORISSA’ Pattern, size 580x440mm with ‘P’ or ‘S’ Trap, Integral Foot Rest, providing Joints between Flush Pipe and Socket of WC Pan including Flushing Cistern and Flush Pipe, fixing with and including provision of cement Concrete Bedding including Taking out/ down unserviceable WC Pan and connected Items, complete all as specified and as directed.

S&F in repair vitreous china premium/1st quality wash down water closet wall hung EWC with/ivory/off white (closed pattern incl all necessary accessories like rag blts/gel gasket etc) including 10liters capacity vitreous china valveless syphonic action type flushing cistern low level white, with inlet ball valve float and handle including brackets complete all as specified and directed.

S&F Vitreous China White Urinal, Half stall type, complete including providing and fixing plugs, bedding urinal against Wall in Cement Mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement ,fixing automatic flushing cistern with bracket ,flush pipe, grating and Union for discharge pipe (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) including making good disturbed surfaces complete all as specified and as directed.

S&F in repairs Vitreous china urinal partition white of size 310x700 mm.complete all as specified and directed.

S&F White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flushing Cistern and connected Items, complete all as specified and as directed.

S&F chromium plated Health faucet with 8mm Dia, 1.2 Meter long flexible tube and wall hook with N.R.V (Back Flow Preventer) as in repair complete all and specified and directed

S&F in repair PVC water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repairs Waste coupling of brass chromium plated for Basin/ Kitchen Sink (half or full threaded) .complete all as specified and directed.

S & F in repairs 32/40mm bore PVC Waste pipe for wash hand basin complete all as directed.

S&F in repair stainless steel Grating doom 100mm dia complete all as specified and directed

S&F in Repair 450mm long PVC connection 15mm bore with PTMT nuts.complete all as specified and directed.

S & F in repairs flush pipe of PVC 32 mm dia ,for low level flushing cistern to squatt pattern closet including all joints and making good to floor complete all as specified and as directed.

Supply and fix, as in repair,15 mm stop valve of PTMT of any colour high pressure screwed ISI marked for iron pipe and fixed for 15 mm bore of pipe(minimum weight 90 gms) etc complete all as specified and directed.(ISI marked)

S&F Angular Stop Cock 15 mm dia (bore), cast copper alloy, fancy type, chromium plated, screwed down, high pressure,with wall flange screwed for Iron Pipes or Brass Ferrule and fixed, complete all as specified and directed.

S&F Stop Valve 15 mm dia (bore), Cast Copper Alloy, Concealed type, Chromium Plated (Fancy type long Shank and Cup) screwed down high pressure with Crutch or Butterfly Handle, screwed both Ends for Iron Pipes or for Unions and fixed-in-repairs, complete all as specified and as directed.

S&F Bib Tap 15mm dia (bore), Cast Copper Alloy fancy type, Chromium Plated, screwed down high pressure with Crutch or Butterfly Handle, screwed both Ends for Iron Pipe or for Unions and fixed-in-repairs, complete all as specified and directed.

S&F in repairs 15mm bore fancy type long body chromium plated bib cock with crutch or butterfly handle screwed down for iron pipes.complete all as specified and directed

Supply and fix, as in repair, bibtap standard of PTMT any colour screwed ISI marked, for iron pipe 15mm bore (minimum weight 90 gms) all as specified and directed. (ISI marked)

S&F Pillar Tap 15mm bore, cast copper alloy, Fancy type, chromium plated, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and fixed-in-repairs, complete all as specified and as directed.

S&F Pillar taps fancy type15mm bore of PTMT any colour screwed for iron pipe & fixed. (min weight 15mm-120gms) as in repair complete all as specified and directed.

S&F Swivel shower with shower arm 15mm size,195mm long with bend of 45 degree with flange of PTMT any colour as in repair complete all as specified and directed.

Supply and fix, as in repair, Overhead Shower 125 mm dia Round Shape Single Flow (ABS Body) Chromium Plated with Gray Face Plate) with Rubit Cl

eaning System, including fixing to steel pipe or union of 15mm bore all as specified and direcetd.

Taking down existing damaged IWC/EWC alongwith complete PCC and line concrete from sunken floor and providing new IWC and water proofing treatment to sunken floor as per following stage :- (i) 15mm thick plastering in CM (1:3) with WPC mixed @2% by weight at all around and base of sunken floor with proper slope. (ii) Applying a coat of 85/25 gde hot bitumen @ 0.7Kg/Sqm over a coat of bituminous primer @0.5Kg/Sqm and then pasteing of polythene film, 150 micron, matural colour with cold cut back adhessive. (iii) Fixing of 25mm dia GI pipe (med gde) spout of length 45 cm. (iv) Supply & fixing of vitreous china squatting pan, "ORISSA" pattern or padestal type, size 580x440mm white with integral footrest, P/S trap etc complete including providing PCC lean concrete (1:5:10) type E1 using 40 mm graded aggregate complete all as specified and directed (v) 40 mm thick PCC flooring in cement concrete (1:2:4) type B-1 using 20 mm Graded aggregate complete all as specified and directed

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish off the Premises, complete all as specified and as directed.

S&F for colour Glazed ceramic tiles (450x300) of 7 to 8mm thick, in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick screed bed or bedding layer in CM (1:4) complete all as specfied and directed.

M&L Glazed Ceramic Coloured Tile 600 x 300 mm x 7 to 8mm thick on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layer in cement mortar (1:4) complete all as specified and as directed.

M&L non-skid coloured ceremic tiles 8 to 10 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed.

Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed

M&L Glazed vitrified tiles 8 to 10 mm thick (square/ rectangular) of any shade, polished, area of each tiles exceeding 0.42 but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6.

M&L Glazed vitrified tiles 8 to 10 mm thick (square/ rectangular) of any shade, polished, area of each tiles exceeding 0.42 but not exceeding 1.00 sqm, in skirting over 10mm thick screeding in cement mortar 1:4

S&F Machine cut kota stone slab flooring 16-18 mm thick (size min 550x 550)laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (Granite Finish Polishing) complete over 20mm thick 1:6 cement mortar screed bed complete all as specified and as directed.

S&F Machine cut kota stone slab 16-18mm thick on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 20 mm thick backing layer in cement mortar (1:4) including rubbing and polishing complete all as specified and as directed.

M&L 18-20mm thick Granite stone (of any type) work (table rubbed and polished) in cooking platforms and like fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match over with shade of granite including edge moulding complete all as specified and as directed.

M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) for in skirting/border with 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shed of granite complete all as specified and as directed.

M&L for Pavigree parking tiles heavy duty of any colour/patern 40cm x 40 cm x 7 to 10 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments in floors and over 15 mm thick screed bed in CM 1:4 for laying floor finishes. Make Johnson & equivlent

Taking down Shutters of any description, exc. 1.00 Sqm but not exc 2.00 Sqm Each and keep in Safe Custody for removing to store, complete all as specified and as directed.

Taking down Chowkat or Frame with shutters (without taking off Shutter from the Frame) exc. 1.50 Sqm but not exc. 4.00 Sqm Each, complete all as specified and as directed.

Taking down Chowkat or Frame with shutters (without taking off Shutter from the Frame) n exc. 1.50 Sqm complete all as specified and as directed.

Taking down Shutters of any description, not exc 1.00 Sqm Each, and keep in Safe Custody for removing to store, complete all as specified and as directed.

Taking down and Refixing Shutters of any description exc. 1.00 Sqm and not exc. 2.00 Sqm Each in the Same Opening after easing and adjusting complete all as specified and as directed.

Taking down and Refixing Shutters of any description n exc. 1.00 Sqm Each in the Same Opening after easing and adjusting complete all as specified and as directed.

S&F Factory Made Solid PVC Door Frame of size 50 x 47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.

S&F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.

S&F anodised aluminium frame , Two/three track for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F anodised aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc.complete all as specified.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S & F anodised aluminium door shutters aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S& F 100 mm stainless steel Butt hinges fixed with SS Screw complete all as specified and as directed.

S&F stainless steel butt Hinges of size 75mm fixed with SS Screw complete all as specified and as directed.

S&F in repairs MS 300 mm ordinary rat tail rod pattern spring including roller and roller plate, fixed to steel/wooden door complete all as specified and as directed.

S&F Aluminium alloy Handle 150mm long, Extruded Section, Fabricated type, anodized and fixed, complete all as specified and as directed.

S&F in repairs Aluminium alloy Handle 150mm long, Extruded Section, Fabricated type, anodized and fixed, complete all as specified and as directed.

S&F in repairs 250mm long Aluminium alloy, anodised, Sliding Door Bolt with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sect

ions or Cast-Aluminium alloy and fixed, complete all as specified and as directed.

S&F Aluminium anodized, Barrel Tower Bolt 150mm long, Extruded Section and fixed, complete all as specified and as directed.

S&F in repairs Aluminium anodized, Barrel Tower Bolt 150mm long, Extruded Section and fixed, complete all as specified and as directed.

S&F Aluminium anodized, Barrel Tower Bolt 200 mm long, Extruded Section and fixed, complete all as specified and as directed.

M&L 2nd CL HW plain fillets square, rectangular or triangular in section clean sawn sectional area exe 6 sqcm & n exe 13 sqcm fixed with nails including dismantling and necessary painting with 2 coats of synthetic enamel paint over a coat of pink primer all as specified and directed

M&L 2nd CL HW plain fillets square, rectangular or triangular in section clean sawn sectional area exe 13 sqcm & n exe 25 sqcm fixed with nails including dismantling and necessary painting with 2 coats of synthetic enamel paint over a coat of pink primer all as specified and directed

S & F in repairs Wire netting(bird mesh) of galvanised steel wire 0.71 mm dia 12 mm mesh size fixed with tinned tacks of wire staples complete all as specified and directed

Dismantling wall /ceiling board (Fibre pulp insulation) or insulation boards any thickness including cover fillets

REPAIR/CLEANING OF SEWAGE LINE/MANHOLES, SEPTIC TANK/SOAKAGE WELL/FITTER BED/SEWAGE SUMP AND SUMP OF STP AND DAY TO DAY MAINTENANCE AND PETTY B/R REPAIRS AT MISA CAMP UNDER GE (S) TEZPUR.

M&L for Cleaning and maintenance of solid/liquid mud/any type of solid content including mud, brick bats, empty containers of any type, rags, polythene or any similar tems deposited in underground sewage lines at any depth upto 2.5 metres including manholes/inspection chambers of any size and any depth, using SUPER SUCTION MACHINE TRUCK MOUNTED HAVING SUCTION CAPACITY 1000 TO 4000 CUM/HRS, JETTING PUMP WITH WORKING PRESSURE AT LEAST 120 BAR having facilities of high pressure water thermoplastic fiber braided water jetting hose and through conicalround shape nozzler pipe. Bottom surface of manholes/inspection chambers & sewage lines should be visible after cleaning process. Sludge/sludge water/any type of waste recovered from sewage ines/manholes/nspection chambers shall be disposed by digging a well complete all as specified and as directed. Note: 1.Lines once cleared will be maintained through out the period of the contract for free flow. If there is any blockage during the period of the contract,same will be cleaned without any extra cost by the contractor. 2. Rate inclusive of Honey sucker Machine, T&P complete 3. Rate of Digging well includes excavation of soil incl returning filling, levelling of surplus soil & suitably sprinkled on top using bleaching powder qty as requied & as directed by EIC.

S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.20.55 mm size of cross tee and main tee 26x24x0.55mm and 32mm x 24mm x 0.55mm with 2 mm dia double GI wire with end adjuster at one end only suspentor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel tress any type of tress (Make: E Board of approved make) complete all as specified and as directed.

S&F 6-10 mm thick PVC hollow panels with to 1.00 mm tkick wall thickness plain PVC sheet suitably placed in Wall/ ceiling inclding same and matching colour wall angle , u clip, end elip and jointer as in ceiling and walls including GI 0.50mm thick GI "C" channel @ 600 to 800mm c/c horizontally/ vertically and at every corner As per specification and drawing all as specified and directed

S&F 4 mm thick frosted/ pin headed glass in ventilator/windows shutters including hacking out old broken glass any, size, quality or description from wooden / metal frame works all as specified and directed by Engr-in-Charge

S& F 4.0 mm thick sheet glass ordinary/tinted quality and glazing with oil putty in squares exc 0.5 sq. m in each pane in squares complete all as specified and as directed.

S & F 4.0 mm thick sheet glass ordinary/tinted quality including hacking out old broken glass any, size, quality or description from wooden / metal frame works and glazing with oil putty in squares n exc 0.5 sq. m in each pane in squares complete all as specified and as directed.

S&F in repairs Hasp and staple 100mm size, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F Stainless steel Continuous (Piano) Hinges, width of Flaps (when open) 30 mm, bright finish and fixed, as in repair complete all as specified and as directed.

S&F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished bright finished complete all as specified and as directed.

Repair windows like steel/wooden/aluminium by using wire brush and easing windows shutter by using oil,greesing or cleaning cement morter or removing old rust, dust,mud etc make it good and smooth to openable in a normal process. Complete all as specifiesd and as directed by EIC

S&F in repair kitchen plate rack made out of stainless steel 0.60 mm thick sheet with partitions and size of rack 900mm X 850mm X 250mm with shape and pattern as per sample kept in Sample room of GE Office complete all as specified and directed.

S&F in repair tubular Towel rail chromium plated 600mm long 20 mm dia D type complete all as specified and as directed.

S&F Chromium Plated soap dish fixed to wall with necessary fixing arrangement as in repair complete all as specified and directed.

Supply and fix,as in repair, 32/40 mm dia PTMT 610 mm long waste pipe suitable for WHB/Sink complete all as specified and directed.

M & L in repair PVC (SWR) Nahani/Floor Trap 75mm bore (dia) Outlet, Plain with Grating and Jointing with Solvent Cement, complete all as specified and as directed.

S&F in repairs stainless steel grating round/ Square cockroach proof with or without hole100/75mm dia all as specified and directed.

S & F in repairs waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged etc complete all as specified and directed.

S & F in repairs CP 40mm dia waste coupling for stainless steel sink with inlet and out let screwed for pipe or connections etc complete all as specified and directed.

S & F in repairs Health faucet (ABS Body) chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F PVC connections with PTMT Nut collar bush and spanner, 600 mm long fixed to 15 mm GI pipe including necessary fixing arrangement as in repair complete all as specified and directed.

S&F PVC connections with PTMT Nut collar bush and spanner, 450 mm long fixed to 15 mm GI pipe including necessary fixing arrangement as in repair complete all as specified and directed.

Supply & fix as in repair stainless steel curtain rod of dia 20 to 25 mm with fixing brackets,etc. with two Nos of end knobs complete for doors/window opening all as specified and directed

Supply and Laying Steel Water Tubing 15mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation,including taking down complete as all specified and as directed.

Supply and Laying Steel Water Tubing 20mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, including taking down complete as all specified and as directed.

Refixing 15mm old steel tubing and connections in new or old position (walls, Ceiling, floors tec) Taking up or down steel tubing and connections, including cleaning for refixing complete all as specified and directed

Refixing 20mm old steel tubing and connections in new or old position (walls, ceiling, floors) etc Taking up or down steel tubing and connections, including cleaning for refixing complete all as specified and directed

S & F in repairs 20 mm Gun metal or gate valves with iron wheel head ,screwd both ends for iron pipe and fixed complete in all respect as specified.

M&L three coats of white wash including preparation of new plaster surfaces as in walls complete all as specefied and directed.

M&L three coats of white wash including preparation of new plaster surfaces as in ceiling complete all as specefied and directed.

M&L one coat of white wash on ceiling and cornices including preparation of old plastered or un plastered of surafce of ceiling by brooming down or steel wire brushing ,scraping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed

M&L Applying two coats of acrylic distemper to newly plastered/previously untre

ated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall all as specified and directed.

M&L preparation of newely plaster sufaces and applying two coats of weather coat (Acrylic water proofing paint) over a thin layer of putty and one primer coats of damp shealth to new plastered walls as per manufacturer and apllied by approved applicator complete all as specified and directed.

M&L for two coats of exterior emulsion paint(Apex) over one coat of priming coat of alkali-resistant priming paint after complete removal of existing treatment of wall surface complete all as specified and as directed.

M&L writing letters or figures (Block, roman, itallic or indian) n.exc. 30cm high. complete all as specified and as directed including necessary scaffolding or ladder.

M&L writing stops, commas, short lines, dashes, hyphens, brackets etc complete all as specified and as directed. including necessary scaffolding or ladder.

M&L Preparing new Steel or Iron Surfaces of any description, exe 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide, Zinc Chrome Primer, complete all as specified and as directed.

NOTES: 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. The rates for RCC/PCC shall deemed to include the cost of formwork, shuttering etc., required for complete and proper execution of the item. Refer Schedule "A" notes for details.