Under the state plan, the newly constructed roads by P.C. leading to the houses of Kamal Velwal and others in Himmatpur Vaijnath, and Bhuwan Singh Bisht, Pankaj Singh Bisht, and others in Poornpur, in the Kaldhungi assembly constituency of Nainital

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1 (Mord 3-14)

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401 For Grading II Material (Mord 4-1-A-2)

WBM Grading 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405 (45-63 mm size) By Mechanical Means (Mord 4-8-2-B)

WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405 (22.4-53 mm size) By Mechanical Means (Mord 4-8-3-B)

Tack coat using VG-10 grade bitumen Over normal bituminous surfaces @0.35kg/sqm (Mord 5-2-2)

20mm thick Open-Graded Premix Carpet using Bituminous penetration grademodified bitumen Binder Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to reuired line, grade and level to serve as earing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three heel 80-100 kN static roller capacity, finished to reuired level and grades to be folloed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508 Bitumen G-30 (Mord 5-9-2-2)

Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 By Mechanical Means Bitumen G-30 (Mord 5-12-B-B-2)

Edging with 2nd class bricks, laid dry lengthwise, including excavation, refilling, consolidation, with a hand packing and spreading nearly surplus earth within a lead of 50 metres) (Morth 11.15)

Earth work in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. Ordinary soil Upto 3 m depth (Mord 11-1-1-1)

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 PCC grade M 10 Nominal mix 1:3:6 (Mord 11-4-1-1)