REPAIRS TO WOODEN FURNITURE PART A AT ARMY AREA JODHPUR UNDER GE ARMY CENTRAL

Amount

Chair Dining Drg No.- FD-228, 279 (a) Rear Legs Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(b) Front Legs Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(c) Side Rail Taking down old u/s Side Rail and M&L for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(d) Front or Back Rail Taking down old u/s Front or Back Rail and M&L for New Front or Back Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(e) Bottom Stiffener Taking down old u/s Bottom Stiffener and M&L for New Bottom Stiffener made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(f) Back Strip Taking down old u/s Back Strip and M&L for New back strip made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(g) Bracket : S&F new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair, size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

(h) Shoes : M & L for removing old/worn out rubber shoes with S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

(j) Re-canning of Chair Dining in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete. Rest all as shown on drawing and as directed by the Engr - in - Charge.

Chair Writing Drg No.- FD-202,250,280 (a) Rear Legs Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(b) Front Legs Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(c) Side Rail Taking down old u/s Side Rail and M&L for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(d) Front or Back Rail Taking down old u/s Front or Back Rail and M&L for New Front or Back Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(e) Bottom Stiffener Taking down old u/s Bottom Stiffener and M&L for New Bottom Stiffener made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(f) Back Strip Taking down old u/s Back Strip and M&L for New back strip made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(g) Bracket : S&F new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Chair, size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

(h) Shoes : M & L for removing old/worn out rubber shoes with S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

(j) Re- canning of Chair Writing in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete. Rest all as shown on drawing and as directed by the Engr - in - Charge.

(k) Arms Rest: Taking down old u/s Arms Rest and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Chair Easy Drg No.- FD-229,201 (a) Rear Legs : Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(b) Front Legs: Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(c) Side Rails of Seat: Taking down old u/s Side Rails of Seat and M&L for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(d) Front/ Back Rails of seat : Taking down old u/s Front / back Rail of Seat and M&L for New front / back Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(e) Side Rail Back: Taking down old u/s Side Rail of Back and M&L for New side rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(f) Top/Bottom Rail of Back: Taking down old u/s Top/Bottom of Back and M&L for New top / bottom rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(g) Front Support Rail : Taking down old u/s Front Support Rail and M&L for New support rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(h) Shoes :- M & L for removing old/worn out rubber shoes with S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

(j ) Re- canning of Chair CBA Wooden in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete. Rest all as shown on drawing and as directed by the Engr - in - Charge.

(k) Arms Rest: Taking down old u/s Arms Rest and M&L for New arms rest made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Chair Dining Officer Drg No.- FD/MAP-ll/05 & FD-357 (a) Rear Legs Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(b) Front Legs Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(c) Side Rail Taking down old u/s Side Rail and M&L for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(d) Front or Back Rail Taking down old u/s Front or Back Rail and M&L for New Front or Back Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(e) Bottom Stiffener Taking down old u/s Bottom Stiffener and M&L for New Bottom Stiffener made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(f) Back Strip Taking down old u/s Back Strip and M&L for back strip made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(g) Bracket : S&F new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

(h) Shoes : M & L for removing old/worn out rubber shoes with S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

(j) Removel of old cushion and Supply and fixing of new seat cusion of 75 mm thick 40 density complete with approved tepestry. Rate of tapestry should not be less than Rs 350/- per RM. Rest all as shown on drawing and as directed by the Engr - in - Charge.

Chair WBB Drg No.- FD-56/285 (a) Rear Legs Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(b) Front Legs Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(c) Side Rail Taking down old u/s Side Rail and M&L for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(d) Seat Frame : Taking down old u/s Seat Frame and M&L for New Seat Frame made out of 12mm thick commercial Plywood ISI Marked complete. All as specified in drg and as directed by Engr-in-Charge.

(e) Bottom Stiffener Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(f) Back Strip Taking down old u/s Rear Leg and M&L for New back strip made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(g) Shoes: M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

(h) Bracket : S&F new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair , size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

SOFA SET 4 SEATER Drg No.- FD-373 (a) Front/Rear legs : Taking down old U/S front/ rear leg of sofa set 4 seater and S& F new front/ Rear leg of teak wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

(b) Side Back/Front Rail : Taking down old U/S Side back/Front Rail of sofa set 4 seater and S& F new Side back/Front Rail of teak wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge Back/ Front.

(c) Battens for Seat/Back : Taking down old U/S batterns for seat/back of sofa set 4 seater and S& F new batterns for seat/back of teak wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

(d) Arms : Taking down old U/S front/ Arms of sofa set 4 seater and S& F new Arms of teak wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

(e) Cushion for Seat : Removing of existing U/S cushion from seat of sofa set 4 seater and S & F new foam cushion 100 mm thick 32 density Make : Kurlon/sleepwel duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)

(f) Cushion for Back : -Ditto- All as per item No 24(e) here-in-avove but Cushion for Back.

(g) Shoes : M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

(h) Cover Only for Sofa Set 4 Seater :- Opening and taking out old unserviceable Cushion Cover size 21"x22"x4" and S&F New Cushion Cover made out of approved Tapestry cloth of best qualy duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)

SOFA SET 5 SEATER Drg No.- FD-373 & MAP-ll/02 (a) Front/Rear legs : Taking down old U/S front/ rear leg of sofa set 5 seater and S& F new front/ Rear leg of teak wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

(b) Back/Front Rail of 3 seater : Taking down old U/S Side back/Front Rail of sofa set 5 seater and S& F new Side back/Front Rail of teak wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge Back/ Front.

(c) Battens for Seat/Back : Taking down old U/S batterns for seat/back of sofa set 5 seater and S& F new batterns for seat/back ofteak as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

(d) Arms : Taking down old U/S front/ Arms of sofa set 5 seater and S& F new Arms of teak wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

(e) Cushion for Seat : Removing of existing U/S cushion from seat of sofa set 5 seater and S & F new foam cushion 95 to 100 mm thick 32 density duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)

(f) Cushion for Back : -Ditto- All as per item No 25(e) here-in-avove but Cushion for Back.

(g) Shoes : M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

(h) Cover Only for Sofa Set 5 Seater :- Opening and taking out old unserviceable Cushion Cover size 21"x22"x4" and S&F New Cushion Cover made out of approved Tapestry cloth of best qualy duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)

Stool Dressing cushion Drg No.- FD/MAP/14 a)-: Back : Taking down old U/S back side board of stool dressing and S& F new back made of 18 mm thick prelaminated MDF board as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

b)-: Front and sides : Taking down old U/S front/side board of stool dressing and S& F new back made of 18 mm thick prelaminated MDF board as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

c)-: Top : Taking down old U/S top of stool dressing and S& F new back made of 12 mm thick plywood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

d)-: Bottom : Taking down old U/S bottom of stool dressing and S& F new back made of 6 mm thick plywood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

e)-: Wheel : Taking down old U/S wheel of stool dressing and S& F new wheel of size 50 mm as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

Table Dressing Ladies Drg No.- MAP-07 (a) Mirror : Removing of old/worn out U/S mirror and M & L for fixing new mirror 5 mm thick mirror as per size shown on drg & directed .

(b) Back ply of mirror :Removing UNSV back from the mirror and S & F new back made out of 6 mm thick ply wood BWR grade. Rest all as specified in the drg and as directed by Engr in Charge.

(c) Top : Removing UNSV top and S&F new top made out of 18 mm thick pre laminated MDF Board exterior grade. Rest all as specified in the drg and as directed by Engr in Charge.

(d) Bottom : Removing UNSV bottom and S&F new Bootom made out of 12 mm thick plywood. Rest all as specified in the drg and as directed by Engr in Charge.

(e) Drawer : M&L for removing old worn out drawer from the table and new drawer made out of 18 mm thick perlaminated MDF board specified in the drg and as directed by Engr in Charge .

(f) Knob : M&L for removing unservicable knob from the table and S & F new CP knob 40mm to suit to the drawer. Rest all as specified in the drg and as directed by Engr in Charge.

(g) cushion : Taking down old U/S cushion and S& F new cushion 32 density and 75 mm thick complete with upholstry ( not less than Rs 350 /- per RM) as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

(h) Shutter : M&L for removing old worn out shutter the table and S&F new shutter made out of 18 mm thick perlaminated MDF board specified in the drg and as directed by Engr in Charge .

Material and Labour for polishing of furniture including scrapping of rough surface and old worn out polished layer with scrapper /sand paper for smoothing the surface and polishing the same with of approved quality french polish to glossy finish. The items are mentioned below :-

(a) Chair Dining FD-279/203/16/262

(b) Chair Writing FD/20/202/250/280

(d) Chair Easy FD-229/201/17

(e) Chair dining officer

(e) Chair WBB FD-26/225/285

(g) Sofa Set 4 Seater FD-281

(h) Sofa Set 5 Seater FD-281

(j) Stool Dressing FD/MAP/14

(k) Table Dressing Ladies FD/MAP/07

L.BHIMSEN

Shri Maruti Trading Co.

PRAFUL ENTERPRISES

SK INDUSTRIES

B.S Constructions