DRUGS AND MEDICINES AND OTHER ITEMS

Drugs ,Medicines & other items

Tab. Baricitinib

Tab. Doxycyline 100mg

Tab. Ivermectin 12 mg

Tab. Azithromycin 500 mg

Tab. Azithromycin 250 mg

Tab. Vitamin C 500 mg

Tab. Zinc 10 mg

Tab. Zinc 20 mg

Tab. Zinc 50 mg

Tab. Paracetamol 500 mg

Tab. Paracetamol 650 mg

Tab. B-Complex

Tab. Prednisolone 20 mg

Tab. Rivaroxaban 10 mg

Tab. Aspirin 75 mg

Tab. Atorvastatin 10 mg

Tab. Apixaban 2.5 mg

Tab. Mg⁺²

Tab. Ca⁺²

Tab. Posaconazole

Tab. Dexamethasone 0.5mg

Tab. Methylprednisolone 8mg

Tab. Methylprednisolone 16mg

Tab. Monteleuckast + Levocetrizine

Syp. DMR-CPM

Syp. Paracetamol 125/5ml

Syp. Paracetamol 250/5ml

Syp. Azithromycin 100mg/5ml

Syp. Azithromycin 200mg/5ml

Syp. Zinc 20mg/5ml

Syp. Posaconazole

Syp. Anti Cold

Syp. Dextromethorphan

Salbutamol Nebulizing Solution

Budesonide Nebulizing Solution

Monoclonal Antibody Cocktail (Casirivimab & Imdevimab)

Inj. Dexamethasone 4mg/ml

Inj. Remdesivir 200mg

Inj. Remdesivir 100mg (for 20% moderate to severely)

Inj. Tocilizumab 400mg

Inj. Tocilizumab 200mg

Inj. Piperacillin + Tazobactum

Inj. Enoxaparin 0.4ml (Low Molecular Weight Heparin)

Inj. Enoxaparin 0.2ml (Low Molecular Weight Heparin)

Inj. Ceftazidime

Inj.Cefoperazone + Sulbactum

Inj.Meropenam

Inj. Methyprednisolone 125 mg

Inj. Ceftriaxone 1 gm

Inj. Amoxy-clav

Inj. Liposomal AMPHOTERICIN-B (For peribulber injection)

Inj. Mg⁺²

Inj. Ca⁺²

Inj. Paracetamol Infusion 1gm

Inj. Pantoprazole IV 40mg

Inj. Ondasetron IV 4mg

Inj. Metacloperamide IV 10mg

Inj. Noradrenaline 2ml

Inj. Adrenaline 1mg

Inj. Atropine 0.6mg IV

Inj. Dopamine 5ml

Inj. Dobutamine 5ml

Inj. Tramadol 100mg

Inj. Tranexamic acid 500mg

Inj. LMWH 0.6CC

Inj. Heparine (Unfractionated) 5ml vial

Inj. Cefriaxone 1gm

Inj. Piperacillin + Tazobactum 450ml

Inj. Piperacillin + Tazobactum (1gm+125mg)

Inj. Piperacillin + Tazobactum (4gm+500mg)

Inj. Dexmeditomidine 100mcg

Inj. Hydrocortisone 100mg

Inj. Dexamethasone 8mg

Inj. Propofol 20ml

Inj. Haloperidol 5mg/ml

Inj.Insulin (Regular) 40 IU/ml

Inj. Insulin (Glargine) 100IU/ml

Inj. Pheniramine 2ml

Inj. Sodium Bicarbonate 10ml

Inj. Calcium Gluconate 10% 10ml

Inj. Potassium Chloride 10ml

Inj. Magnesium Sulphate 2ml

Inj. Naloxone 0.4mg/ml

Inj. Phenytoin 100mg

Inj. Valproic acid 500mg

Inj. Fluconazole 200mg

Inj. Furosemie 20mg

Inj. Deriphyllin

Inj. Mannitol 20% 100ml

Inj. Multivitamin 10ml amp.

Inj. Morphine 10mg

Inj. Ketamine 10ml

Inj. Succinylcholine 10ml

Inj. Midazolam 5ml

Inj. Midazolam 1mg/ml

Inj. Fentanyl 5ml

Inj. Albumin (20%) 100ml

Inj.Diazepam 5mg/ml

Inj. Promethazine 50mg/ml

Inj. Meropenem 1gm

Inj. Meropenem 500mg

Inj. Amikacin 500mg/ml

Inj. PAM (Pralidoxime) 500mg

Inj. Methylprednisolone 1gm

Inj. Methylprednisolone 500mg

Inj. Methylprednisolone 250mg

Inj. Methylprednisolone 125mg

Inj. Methylprednisolone 40mg

Inj. Lignocaine IV 2% 50ml

Inj. Esmolol 10ml

Inj. Labetolol 4ml

Inj. Glycopyrrolate 0.2mg

Inj. Atracurium 25mg

Inj. Atracurium 10mg/ml

Inj. Vecuronium 4mg

Inj. Tericoplanin 400mg

Inj. Tericoplanin 200mg

Inj. Vancomycin 500mg

Inj. IVIG 5gm

Inj. Baricitanib 2mg

Inj. Baricitanib 4mg

Inj. Itolizumab 100mg

Inj. Potassium chloride 0.15 gm/ml 10 ml. amp.

Syp. Lactulose 100ml

Tab. Doxycyclin 100mg

IV Fluids Isolyte P 500ml (only FFS type)

IV Fluids NS 500ml (only FFS type)

IV Fluids NS 100ml (only FFS type)

IV Fluids RL 500ml (only FFS type)

IV Fluids D5 500ml (only FFS type)

IV Fluids DNS 500ml (only FFS type)

IV Fluids N/2 500ml (only FFS type)

IV Fluids D-25 100ml (only FFS type)

Duolin Respules 2ml

Budesonide Respules 2ml

IV Cannula 18 G

IV Cannula 20 G

IV Cannula 22 G

NRBM (HFM) :- should have following specifications- • Disposable Adult Non Rebreathing Mask & Bag With Head Strap & Star Tubing Line • Non-Rebreathing Bag prevents rebreathing of the exhausted air. • It should have a low resistance, latex free check value that allows exhaled gas to excape, helping patient receive better quality air. • It should have adjustable nose clip helps ensure a snug, comfortable fit. • Masks should come with a 750ml reservoir bag and in a standard or safety vented style. • It should have adjustable head pump. • It should have star tubing line & have length three meter long. • It should have PE Non-Woven material. • It should have individually & sterile packed. (Company-Lifesol/Fisher & Pykel/ Medex (Smith/Romsons)

Nebulization Mask

Simple Face mask

Nasal Prongs.

PMO Line

3 Way Extension :- should have following specifications- 150cm with three way stop cock.

Tracheostomy tubes 7.0

Tracheostomy tubes 7.5

Tracheostomy tubes 8.0

Central Line 3 lumen :- should have following specifications- • Three (3) Lumen Central Venous Catheter with Sterile, non pyrogenic. • Straight needle. • Catheter size 7.0Fr • Length-16cm • It should have Nitinol Guide wire and tecoflex catheter. • Port: Distal-16 G, Proximal 18 G, Medial-18 G • Introducer needle-18G X 7cm (1) • Raulerson Syringe (1) • Heparin injection stopper (3) • Clamp Blue CVC (3) • Scalpel blade (1) • Guide wire 0.036” X 45cm/ J-tip Nitinol (1) • 5ml syringe 21G needle(1) • Tissue Dialator 8F X10cm (1) • Clamp for CVC (1) • Y-Shape Introducer Needle, 18G X7cm(1)

Tegaderm

Lignocaine Jelly

Lignocaine for Infiltration 20ml

Surgical gloves 6.5

Surgical gloves 7.0

Surgical gloves 7.5

Insulin Syringe 40IU

Insulin Syringe 100IU

Glucometer with strip :- should have following specifications- Product Eligibility Criteria:- Product should be CE as per IVD or USFDA certified- Manufacturer should be ISO 13485 certified for quality standards- The device and test strips should be certified by the National Institutes of Biologicals (NIB) Govt. Of India. Technical Specifications 1. Small, portable and user friendly device is required. Blood should not go into the glucometer while measurement. 2. It should be able to measure whole bloo in capillary mode. 3. Measurement range: 30 to 600 in mg/dl. 4. Accuracy should be as per International Standard ISO 15197: 2013 (Requirements for Blood-glucose monitoring systems for self-testing in mamaging diabetes mellitus). Supporting certificates or test reports from the National Institute of Biologicals (NIB) must be furnished of last 2 years with the technical bid. 5. Reproducibility/Precision: ±5% 6. Display shoul be 40mm±5mm or better measure diagonally. 7. It should be battery operated electronic system and the battery life should be for atleast 500tests. 8. Self life of strips: Minimum 6 months at the time of delivery to consignee. 9. Packing of strips should not be more than 50 strips in a pack. 10. Strips should work for minimum 3 months after opening of strips pack. 11. Operating temperature for both device and test strip should be 100 C to 400 C 12. Shoul have strip ejection button facility to avoid cross contamination to the operator. 13. Control solution for checking reliability of strips will be supplied free of cost as & when required. 14. Ready availability of reagent test strips, battery & other consumables in Jodhpur for at least 5 years. Scope of supply: a) Glucometer: 1 no. b) Standard batteries: 1 set c) Carrying case: 1no. d) Control solution/Control strips e) Glucose test dtrips: As per order f) Auto disables llancets: As per order

Thermometer :- should have following specifications- • Accurate and fast • Environmental friendly • Safe to use • Clear visions of temperature • Beep alert sound • Should be used orally, rectally & uner armpit • Measurement Range: 32°C (89.6°F)----42°C • Low Temperature Display: Temperature<32°C (89.6°F) display L°C(L°F) • High Temperature Display: Temperature: Temperature>43°C(109.4°F) Display H°C(H°F) • Accuracy: 35°C(95°F)----39°C(102.2°F)±0.1°C(0.2°F) • Display Resolution: 0.1°C(0.1°F) • Normal Beep sound: 10 long beep sound in 10 seconds. • Fever Beep sound>37.8°C/100°F): 30 short beep sounds in 10 seconds. • Auto Power Off: 8 minutes±2 minutes • Battery: AG3 or LR41 • Life of Battery: 2 years or 2500 times. • Dimension: 125mm x 19mm x 11mm • Unit weight: approx x 9.8 g (including battery) • Operational condition: Temperature 10°C(14°F)-----40°C(104°F) Humidity 30%---85% RH • Storage condition: Temperature 10°C(14°F)-----60°C(140°F) Humidity 25%---90% RH

Ketometer :- should have following specifications- Free Style Optium Neo Ketometer with Keto Strips.

Sphynomanometer:- should have following specifications- Required Technical specifications:- a) Should be able to measure blood pressure and pulse rate in adult as well as pediatric patients. b) Should be based on oscillometric measurement technology, using dynamic linear deflation method. c) Should have backlight LCD isplay with easy to view reading in dim light. d) Pressure measurement range should be 60 to 250mm Hg systolic, and 40 to 200mm Hg diastolic. e) Pressure display accuracy of ±3 to 5mm Hg f) Pulse rate measurement range of 40 to 200 per minutes g) Pulse measurement accuracy of within 5% h) Should include AC aapter (input range 100-240V and output voltage DC 6V), preferably with rechargeable battery (3.6V to 4.8V, 1900 to 2400mAh) i) Should be supplied with standard adult size cuff (22 to 32mm size) j) Single button operation for start and stop functions with auto-inflation of blood pressure cuff. k) Should be USFDA approved for clinic / hospital use.

Blood Sugar Strips

Blood Ketone Strips

T-Piece :- should have following specifications- T-piece with port 22mm-15cm reservoir flex tube and Oxygen stem with cap. Sterile, Disposable, Individially packed. 7.6 mm port for suction with non-popping cap. 15mm ET connection. 2 mtr. Star lumen Oxygen Tube.

Bain Circuit :- should have following specifications- • Adult type • PVC Tube length-3m • Corrugated tube-22mm; length-1.6m • 22mm Heidbrink expiratory valve • 15mm/22mm angle mount • Antistatic Breathing Bag with mount-2L volume • 23mm Male plug in mount • Outer diameter of tube-22mm • 22mm Male/Female Circuit adaptors X2 • 23mm/23mm Female/Female Circuit adaptor

Ventilator Circuit:- should have following specifications- • Sterile, Disposable, double limb (recommended Companies-Neon, Drager, Sewards, Altera)

HME Filter:- should have following specifications- • No need to disconnect HME while Nebulization. • Should have Higher Drug Deposition • No PEEP Loss • It should maintain the patency of the Airways • It should reduce Infection • High performance 3 Layer air filtration (HEPA, Electrostatic & Hygroscopic)

Catheter Mount:- should have following specifications- Expandable catheter mount with 360° rotation & suction port (recommended companies Intersurgical, Fisher Paykel, Romsons)

NIV Mask –Adult :- should have following specifications- • Soft Silicon Cushion for effective sealing in case of gas flow. • Comfortable seal and light weight • Quick release mechanism in case of emergency • Single motion refit. • Soft and flexible headgear for superior comfort with self-adjusting crown strap. • Zones on either side of the mask minimise drag on circuit. • Compatible with ventilator for BIPAP/NIV use.

NIV Mask - Paediatric should have following specifications- • Soft Silicon Cushion for effective sealing in case of gas flow. • Comfortable seal and light weight • Quick release mechanism in case of emergency • Single motion refit. • Soft and flexible headgear for superior comfort with self-adjusting crown strap. • Zones on either side of the mask minimise drag on circuit. Compatible with ventilator for BIPAP/NIV use.

Oxygen Mask High Flow

ET Tubes( 6.0, 6.5,7.0, 7.5, 8.0):- should have following specifications- • Pre-sterilized, single use. • Siliconized PVC non-toxic to tissues. • Implantation tested marking on the tube. • Thermo-sensitive to adapt to tracheal anatomy. • Non-kinkable • Bevel with Murphy eye. • Radio-opaque line all along the length of the tube to detect the correct position on X-ray. • Should adopt universal connector of 15mm and should be compatible with all circuits. • Cuff should be bonded, non-herniating • Size range- 2.5 to 8.0 mm in 0.5mm increments. • Inflation of the ballon via a one-way valve with a pilot ballon and should be on the concave aspect of the tube. • Depth marker at the proximal cuff end, 3cm from the cuff. • Cuff should be smooth, non-traumatic, low-pressure high volume. • ETT opening should be bevelled type, rounded edge, facing to the left end of the tube with an angle of 38±10.0 • Marking on the tube to know the depth of insertion and fixation at mouth. • Specified mention on the tube-Nasal/Oral; Outside diameter OD in mm; Inside diameter ID in mm

Adult ET Tube Stylet :- should have following specifications- • Type, Aluminium stylet • Purpose, To secure rigidity of a soft catheter or cannula or to maintain patency of a hollow needle and also for proper placement of endotracheal tubes. • User age, Adult • Application, Flexible metallic rod inserted in lumen of flexible catheter to stiffen and give it form during its passage and also for use inside an endotracheal tube to give it a certain shape which aids in navigation of the tube towards the laryngeal inlet. • Safety and uni-directional adjustable end cap to prevent from advancing during intubation. • Stylet contain malleable wire encased in a specially designed PVC sheath which allows smooth insertion. • Radiopaque. • Coude tip (facilitates insertion in adults), DIMENSIONS • Length (Cm), 40 centimeter • Suitable ET tube size (mm), 4 milimeter • Suitable ET tube length (Cm), 32 centimeter • Weight of stylet (gms), 12 to 20 gram • Standard Product Conformity to standard, EU-CEISI Marked, No CM/L Number (if product is ISI marked) PACKING • Packing, Individual blister pack 3 pc CERTIFICATIONS & REPORTS • Submission of Test Report from Central Government/NABL/ILAC accredited Lab or Manufacturer’s inhouse Test Report to prove the conformity to declared specification at the time of supply, Yes • Certification Available, EU-CE • Submission of all the certifications to the buyer along with supplies on demand, Yes

PPE Kit:- should have following specifications- • Disposable Coverall [made of non-woven, breathable fabric which passes ASTM F1670(Synthetic Blood Penetration Test) or equivalent] • Biosafety Goggles. • Long shoe cover 1 pair with water impervious seam. • Gloves: 2pairs • N95 respirator • Disposable Bag-1 no., CE European mark. A. Biosafety Goggles 1. High quality biosafety goggles should cover eyes from all the sides, with good seal with the skin of the face; should be able to accommodate prescription glasses. 2. The goggles should be made of transparent material. 3. Flexible frame should easily fit all face contours without too much pressure. 4. Should have indirect vents that help protect against splash 5, Fog and scratch resistant. 5. Adjustable elastic band to secure firmly so as not to become loose during clinical activity. B. Coverall (single use) 1. Single use coverall for use by health care professionals. 2. White/light shades to better detect possible contamination. 3. Coverall should be made of a non-woven, soft breathable fabric which passess ASTM F1670 (Synthetic Blood Penetration Test) or equivalent. Seams should be thermally sealed or taped. SITRA/DRDO/ equivalent certificate to be provided. 4. Coverall shall be designed to be universal fit or available in different sizes. 5. Design should allow easy donning & safe removal. 6. Coverall should have in-built hood cap. 7. Zipper (lockable) of the coverall should be in the front and should be covered with a broad flap to completely cover the zipper to avoid accumulation of microbes Soft Elastic should be fitted around Front of hood, wrists & ankles. C. Specification of N-95 Mask (Without Valve) 1. A particulate respirator with filtration efficiency of 95% or more against particulate aerosols>0.3µm. 2. It should be disposable & to be able to fit for wide range of face sizes. 3. The nose clip should be adjustable; should allow molding to fit on nose; preferably should have foam on the inner surface to allow good fit at nose. 4. Ultrasonically/thermal/stapled welded head bands preferably with adjustable beads should be fitted robustly. 5. Should NIOSH approved. 6. Should be without valve. 7. It should be preferably flat style. 8. Brand name, NIOS, TC number, model number should be printed in mask. D. Shoe Cover (Long) 1. Made from non-toxic, Non-woven, thick good quality fabric which is water impervious even at the seam. 2. Should cover lower leg (till just below the knees) 3. Should be provided with sturdy, stitched up ties near the upper end to secure the shoe cover. 4. Well stitched in universal regular size to fit standard shoe size of 7 to 12. 5. Skid resistant and dust proof. 6. Material should have good grip and easy to wear. E. Gloves 1. Nitrile gloves size-7 & 7.5 F. Face Shield Reusable 1. High quality Face Shields for Use by healthcare Professionals to protect face from splashes; completely covers three sides & length of the face & neck. 2. The Shield visor should be made of optically clear; distortion free, sturdy plastic, acrylic material which provides good visibility; the material should be scratch resistant. 3. Adjustable Head Gear to Fix Firmly around the head & fit snuggly against the forehead. 4. Should be amendable to decontamination using chemicals such as hypochlorite/ethanol etc.

N-95 Mask :- should have following specifications- 1. A particulate respirator with filtration efficiency of 95% or more against particulate aerosols>0.3µm. 2. Mask will have 6 filtration layers, consisting of minimum 2 Meltblown layers of 25 GSM each for bacteria and particulate filtration (manufacturer should mention categorically about classification of all layers in separate letter.) 3. BIS approved.( BIS certificate should be attached.) 4. BIS certification License number should be printe on each mask along with BIS. 5. Each mask will follow UV sterilization process before packaging. 6. It should have durable ultrasonic sealing all-around the mask to not let virus to penetrate. 7. It should be disposable, non-collapsible and to be able to fit for wide range of face sizes. 8. The in-built adjustable nose pin should have 100% aluminium strip, should allow moulding to fit on nose; and should have foam on the inner surface to allow good fit at nose. 9. Without valve. 10. With ultrasonically sealed flexible Ear and Head loops (option of head loop also should be available- both samples should be submitted.) 11. In individual packaging.

Surgical Mask

Surgical Cap

Airway size-3

Airway size-4

Airway size-5

Closed Suction Systems :- should have following specifications- Recommended company (Halyard, Medtronic, Cook) Size- 7,8,10,12 Fr 1. Catheter should be made of medical grae silicon material having number & colour graduation for controlled epth suctioning. 2. Separate three Y connector for different ET tubes in the single pack. 3. It should have zig zag suction port at catheter tip for preventing blockage through proper suctioning. 4. It should have thumb control system for easy identification of lock or unlock vaccum system.

Suction Catheter

Foley’s Catheter

Silicone Foley’s Catheter

Ryles / Nasogastric Tube

Disp. Syringe with needles- 2ml

Disp. Syringe with needles-5ml

Disp. Syringe with needles-10ml

Disp. Syringe-20ml

Disp. Syringe-50ml

IV set

BT set

Feeding Bag

Uro Bag

VTM Kits

Triple Layered Mask

Powder free Nitrile gloves

Hand Sanitizers 500ml

Face Shields

PPE Kits

Shoe Covers

Surgical Cap

Ecoshield

Knee length gown (back open) disposable

Isopropranol Lol. Grade

Ethanol 500ml/Absolute Alcohol 95-100%

Sodium Hypochlorite

Nuclease free water

Micropipette tips filtered, sterile RNase/DNase 20ul(10x96)

Micropipette tips filtered, sterile RNase/DNase 100ul(10x96)

Micropipette tips filtered, sterile RNase/DNase 200ul(10x96)

Micropipette tips filtered, sterile RNase/DNase 1000ul(10x96)

Eppendorf tubes-RNase/DNase free, Free pyrogen (1.5ml) (1x500 pack size) (Size 10x96)

Tissue Paper Roll (Size 10x96)

Abro Tape (Size 10x96)

Waste Disposable Bags Autoclavable-Red 30L

Waste Disposable Bags Autoclavable-Yellow 30L

Waste Disposable Bags Autoclavable-Yellow 15L

Waste Disposable Bags Autoclavable-Black 30L

Polybag ties

Sterile Falcon Tube-15ml

Sterile Falcon Tube-30ml

Lyzol

10% Hypochlorite

Sterile Distilled water

Baccishield (5 Ltrs.)

Spray Bottle (5 Ltrs.)

Spray Bottle Nozzles (5 Ltrs.)

Discarding jars (5 Ltrs.)

Test Tube rack stands for 15ml Falcon Tubes

Test Tube rack stands for 50ml Falcon Tubes

Perkin Extraction System (96x10)

Zybio (32x10)

Zybio (96x10)

QIA cube HT (Catalogue no.5262)(5x96)

Tecan (5x96)

Thermofisher (1x96)

easyMAG

Master mix kit for PCR run for Covid 19 RNA

Multichannel pipette-(1-10ul) (Size 5x96)

Multichannel pipette-(5-50ul) (Size 1x96)

Multichannel pipette-(30-300ul)

Multichannel pipette-(500ul)

Multichannel pipette-(1000ul)

Hand Dryer machine

Foot Operated Dustbin Yellow

Foot Operated Dustbin Red

Foot Operated Dustbin Black

Cool Box for master mix

Cooler racks for Tubes

D Glucan Assay

Galactomannan

Arterial Line( Radial and Femoral) : should have following specifications- All in one arterial catheter (20G) with dart technique for easy insertion) • Integrated arterial catheter with spring wire guide. • Should have removable suture wings. • Should have catheter length of 3 cm or more • Should have guide wire length of 12 cm or more. • Shoul have introducer needle of 22G of length 8 cm or more

S.R.PHARMA

RENIX

Harsh Distributors

ashok pharma distributors

Harsh Distributors

RENIX