T-20/EDCP/2025-26

Amount

Safe carriage of following materials from store centre-Pilibhit to different sites under EDD-Puranpur including loading & unloading distance up to 60 Km. (sites/location detail enclosed as annexure-10)

11/0.4 KV, 25 KVA T/F.

11/0.4 KV, 100 KVA T/F.

11/0.4 KV, 250 KVA T/F.

PCC POLE - 8.5 MTR LONG

LT XLPE CABLE 3.5X70 SQ. MM

LT XLPE CABLE 1X240 SQ MM

AB CABLE (3X120+1X95+1X16) SQ MM

AB CABLE (3X95+1X70+1X16) SQ MM

AB CABLE (3X50+1X35+1X16) SQ MM

LT PVC CABLE 3.5X70/35 SQ. MM

3 PHASE DISTRIBUTION BOX

MS Top channel

11 KV disk insulator 45 KN

MS Base angle

S/s Base angle

11 KV Pin insulator

11 KV X-arm V type

GI wire 8 SWG

MS earthing Rod

11 KV 3 Phase DO fuse

Lug 70 sq.mm

ACSR weasel conductor

Stay wire 3.15 mm 7/10 SWG

Stay Insulator

Stay Set complete 16x1800

Erection of the Single pole on PCC. Pole 8.5mtr long, complete work including-cutting, making holes, fixing of all types of accessories digging of pits complete in all respect, as per RESSPO drawing. nut, bolt washers would be provided by the contractor.

Erection of the Double pole structure on PCC. Pole 8.5mtr long complete for 25 KVA T/F including work-cutting, making holes, fixing of all types of accessories digging of pits complete in all respect, as per RESSPO drawing. nut, bolt washers would be provided by the contractor.

Erection of stay set with stay wire, stay clamp & stay insulator including with grouting of stay set by concrete of ratio 1:4:8 as per RESSPO norms before back fitting of the pits including binding, climbing, clamping, tightening and nozzeling of stay wire in all respect as per RESSPO norms Cement. Brick, ballast, sand etc would be provided by the contractor.

Concreting of PCC Pole at the time of erection of pole in 1:4:8 concrete ratio from bottom of pole to ground level and plinthing of supports upto 300mm above ground level by using cement, sand & coarse aggregate in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing. All matrial would be provided by the contractor.

Earthing of each PCC Poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastning with GI wire to each support by nut & bolt. Earthing rod must be 0.15Mtr.above from the plinth of the support. All type nut & bolt would be given by the contractor.

Opening/Dismantling of all connections from following old distribution transformer, landed of transformer from double pole by crane and safe carriage from mentioned sites under EDD-Puranpur of (sites/location detail enclosed as annexure-10) store centre-Pilibhit including loading & unloading and stacking at proper place.

11/0.4 KV,10 KVA distribution transformer

11/0.4 KV,100 KVA distribution transformer

Construction of plinth for 250 KVA T/F of size 2 mtr. X 2 mtr. X 1.5 mtr (As per site requiment) with the help of first class bricks, cement & coarse sand as per norms. Filling the structure completely by brick blast & plastering work of walls Including CC work on top in ratio 1:2:4 by cement, stone grit & sand and grouting of 2 nos. M.S. channel of size 50x50x5 mm on the top of T/Fs plinth whole work should be done as per RESSPO norms complete in all respect. (All Material will be provided by Contractor on his own cost).

Mounting of following distribution transformers on newly constructed plinth/Double pole, laying of cable jumpering and making all HT/LT connections complete work in all respect.

11/0.4 KV, 25 KVA T/F.

11/0.4 KV, 100 KVA T/F.

11/0.4 KV, 250 KVA T/F.

Fabrication and grouting of wire mesh fencing of 28 fit running length in rectangular shape height 2 meter with M.S. angle of size 50x50x06 mm. including gate at one side as per norms complete work and painting of same with 2 coats of red oxide and 2 coats of synthetic enamale paint. (All Material will be provided by Contractor on his own cost).

Earthing of T/Fs by boaring type up to water level as per norms of UPPCL by providing GI pipe and making connection from boaring site to body and neutral of T/F. (All Material will be provided by Contractor on his own cost).

Earthing of 25 and 100 KVA Distribution transformers by inserting the MS earthing rod complete earthing work in all respect Earthing rod must be 0.15 Mtr. above from the plinth of the support. All type nut & bolt would be given by the contractor.

Fabrication and Installation of 11 KV fuse set on midway 11 KV double pole structure with mention material As- MS channel 100x50x2028 mm, Iron strip-50x5x305 mm, fuse wire and holding clamps etc. complete work in all respect all required materials provided by contractor on his own cost.

Providing and fixing of double structure henely type LT tailess units 400 Amp. Complete work in all respect all required materials provided by contractor on his own cost.

Providing , febrication and istallation of Tailness unit structure of MS channel size 100x50x6 mm

Providing febrication and istallation of almunium Busbar size 100x6x5x10 mm @ 2 nos./ TF

Providing febrication and istallation of Copper L Piece size 200x50x6 mm @ 4 nos./ TF

LAYING OF LT XLPE CABLE 3.5X70 SQ. MM

LAYING OF LT XLPE CABLE 1X240 SQ MM

LAYING OF AB CABLE (3X120+1X95+1X16) SQ MM

LAYING OF AB CABLE (3X95+1X70+1X16) SQ MM

LAYING OF AB CABLE (3X50+1X35+1X16) SQ MM

LAYING OF LT PVC CABLE 3.5X70/35 SQ. MM

FIXING OF 3 PHASE LT DISTRIBUTION BOX

PROVIDING AND FIXING OF HOLDING CLAMPS FOR S/S WITH BOLTS & NUTS

PROVIDING AND FIXING OF PG CLAMPS

PROVIDING AND FIXING OF 11 KV F CLAMP

PROVIDING AND FIXING OF X-ARM HOLDING CLAMP WITH NUT & BOLT

PROVIDING AND FIXING OF DISTRIBUTION BOX CLAMP

PROVIDING AND FIXING OF PIERCING CONNECTOR

PROVIDING AND FIXING OF LT CLAMPS WITH N&B

PROVIDING AND FIXING OF LUGS 400 sq. mm

PROVIDING AND FIXING OF LUGS 70 sq. mm

PROVIDING AND FIXING OF STAY CLAMP

PROVIDING AND FIXING OF SUSPENSION CLAMP WITH I HOOK

PROVIDING AND FIXING OF DEAD END CLAMP WITH I HOOK

Safe carriage of received back of following T/F from site to Store Centre-Pilibhit after opening all connections and lowering of T/F including loading, unloading at both ends and proper stacking at safe site under EDD-Puranpur.

11/0.4 KV, 10 KVA T/F.

11/0.4 KV, 100 KVA T/F.

BARKATI ASSOCIATES (BID ID -5580591)

M/S HINA ELECTRICALS (BID ID -5591501)