Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹6.4 Laccepted-aoc | accepted-aoc |
Tender Value
₹8.3 L
EMD Value
₹8,280
Closing Date
26 Aug 2026, 3:30 pmClosed
GUNTUR MUNICIPAL CORPORATION
GUNTUR
Supply, delivery and Installation of 37 sets of 80 ltrs Four-Bin set plastic bin sets Red, Green, Blue and Black bins In Guntur Municipal Corporation .
975405
ET NO.37/2025-26 ITEM NO-01
OPEN - NCB
Civil Works
GUNTUR, ANDHRA PRADESH
1 document required · 1 mandatory
₹294
₹8,280
6 Oct 2026
10 Aug 2026
10 Aug 2026
Supply, delivery and Installation of 75 sets of 80 ltrs Four-Bin set plastic bin sets Red, Green, Blue and Black bins In Guntur Municipal Corporation Inclulding Transportation up to Vehicle Depot Store and as per the instructions of the department authorities etc,. Complete and excluding GST Supply, delivery and Installation of 80 Litres Four-Bin Plastic Bin Set with MS Stand comprising four (4) colour-coded plastic bins (Green–Wet Waste, Blue–Dry Waste, Red–Hazardous Waste and Black–Special Care Waste), each of 80 litres capacity with lids, complete with fabricated MS stand. The bins shall be made of high-quality UV-stabilized HDPE/LLDPE or equivalent material having high impact, tensile and compressive strength, unbreakable, reusable, washable, chemical and UV resistant, anti-corrosive, non-toxic, acid-resistant and provided with built-in bottom grip for easy handling. Approved makes: Nilkamal/Chetan/Joyo or equivalent approved make. The stand shall be fabricated from 50 × 50 × 4 mm MS angle with a height of 45 inches above ground level, provided with tilting and locking arrangement for easy unloading. Each bin shall be reinforced with 25 × 6 mm MS flat ring and mounted using 25 × 8 mm MS bolts for smooth pivoting movement. The stand legs shall be provided with 50 × 50 × 4 mm MS angle brackets for grouting in concrete. The MS frame shall be finished with one coat of anti-corrosive primer and two coats of black enamel paint. The rate shall include all materials, fabrication, transportation, labour, installation, tools, tackles and all incidental charges, complete as directed by the Engineer-in-Charge.
Provision for Seignorage charges
Provision Towards merit 2%
Provision Towards DMF 30%
Provision for NAC @ 0.10%
Provision for GST @ 18%
Provision for TPQA @ 0.739 %
Unforeseen item
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Tender Document.doc
TENDER_DOCUMENT • 0.44 MB
466084.xlsx
TENDER_DOCUMENT • 0.01 MB
DECLARATION.docx
TENDER_DOCUMENT • 0.02 MB
Notice Inviting Tender item 2.docx
TENDER_DOCUMENT • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .