Design, Supply, Installation, Testing and Commissioning of 05 No.(G plus 3) and 01 No. G plus 1 customized 05passenger Lifts with allied works at Transit Accommodation at Fatehpora Baramulla.

Type: MRL Type Passenger Lift. Design, Supply, Installation, Testing & Commissioning of a reputed make 5 passengers (340 Kg) Machine Room Less (MRL) Type Gearless Machine lift (G+3). The lift shall be suitable for 5 passengers of standard design having speed of 1.0 m/s serving from ground to 3rd floor i.e. 04 stops and 04 landings. All stops and landings are on the same side. The elevator shall be of state of art technology, energy efficient drive and all its components / accessories shall conform to relevant IS standards. This shall also include a DLP of 01 year. Power Supply - 400/415 V (3 Phase AC) Control: Selective Collective Operation/Simplex Full Collective Control. Drive: VVVF Drive with feedback control (closed loop) SITE DIMENSION: Available Shaft Dimension: 1400 mm (W) X 1700 mm (D) Available Pit Depth: 1500 mm Available Overhead: 4250 mm Note: The bidder shall visit the site before quoting the rates. Signals: Digital Car position indicator, car travels direction indicator in car and at all landing with call registration indicator. COP & LOP must have stainless steel face plate silver brushed with surface mounted button encoded with braille. Button: Floor pushbutton, alarm bell pushbutton, door open and close pushbutton etc. All buttons on car & landing shall be luminous & encoded with braille. Operation Push Button for lift maintenance & service should be present inside the car. Display type: Monochrome/ Colour LCD / Segmented LCD/ Scroll. CAR: Design: Stainless steel in hairline finish. Car floor shall be of a flat non-slip or chequered surface Blower fan in car for ventilation. Car Door: Stainless Steel Centre Opening/Side Opening Telescopic provided with photocell detector technology and having a fire rating as per OEM design. Round Handrail in Stainless steel finish provided on rear wall of car. PROTECTIVE DEVICES & OTHER ACCESSORIES: ARD: Automatic rescue device complete with battery system for automatic evacuation to the nearest floor in case of power failure. Overload Protection: On overloading condition, the lift car will not start with door remaining open and give audio & display indication. Motor overheat protection. Phase failure and phase reversal protection. Battery operated emergency lighting in the lift car. Emergency Alarm: Alarm button in car operating panel. Fireman switch and fireman control. Voice Synthesizer: Voice announcement system in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the lift. Buffers: As per manufacturer's standard conforming to IS. Counter weight shall be as per design. Main Wire Rope / Belt: As per manufacturer's standard conforming to IS. Landing Door: Automatic Stainless-Steel Centre Opening/Side Opening provided with photocell The Job also includes Civil works like Whitewashing of lift shaft,Waterproofing of Pit and Pit Civil Works.Construction of Overhead as per IS Codes and lintel at entrance of landing door at each floor. Granite façade work at each floor. Any other minor civil/electrical works, including rectification of damages, if any, occurring during repair/installation. .Laying of 6 inch RCC slab at the top to cover the hoist way shaft, along with ISMB 200 load beam at the centre of lift shaft or three no. iron hooks in the slab, or as per OEM recommendations for overhead covering . The necessary chipping of the lift shaft.(as per OEM recommendations)Electrical works in scope of contractor: Providing and fitting of lift shaft electric lighting system along with 16 Amp 3-pin sockets and switches at each floor , lift pit,overhead as per OEM recommendation inside the lift shaft.

Type: MRL Type Passenger Lift. Design, Supply, Installation, Testing & Commissioning of a reputed make 5 passengers (340 Kg) Machine Room Less (MRL) Type Gearless Machine lift (G+1). The lift shall be suitable for 5 passengers of standard design having speed of 1.0 m/s serving from ground to 3rd floor i.e. 02 stops and 02 landings. All stops and landings are on the same side. The elevator shall be of state of art technology, energy efficient drive and all its components / accessories shall conform to relevant IS standards. This shall also include a DLP of 01 year. Power Supply - 400/415 V (3 Phase AC) Control: Selective Collective Operation/Simplex Full Collective Control. Drive: VVVF Drive with feedback control (closed loop) SITE DIMENSION: Available Shaft Dimension: 1400 mm (W) X 1700 mm (D) Available Pit Depth: 1500 mm Available Overhead: 4250 mm Note: The bidder shall visit the site before quoting the rates. Signals: Digital Car position indicator, car travels direction indicator in car and at all landing with call registration indicator. COP & LOP must have stainless steel face plate silver brushed with surface mounted button encoded with braille. Button: Floor pushbutton, alarm bell pushbutton, door open and close pushbutton etc. All buttons on car & landing shall be luminous & encoded with braille. Operation Push Button for lift maintenance & service should be present inside the car. Display type: Monochrome/ Colour LCD / Segmented LCD/ Scroll. CAR: Design: Stainless steel in hairline finish. Car floor shall be of a flat non-slip or chequered surface Blower fan in car for ventilation. Car Door: Stainless Steel Centre Opening/Side Opening Telescopic provided with photocell detector technology and having a fire rating as per OEM design. Round Handrail in Stainless steel finish provided on rear wall of car. PROTECTIVE DEVICES & OTHER ACCESSORIES: ARD: Automatic rescue device complete with battery system for automatic evacuation to the nearest floor in case of power failure. Overload Protection: On overloading condition, the lift car will not start with door remaining open and give audio & display indication. Motor overheat protection. Phase failure and phase reversal protection. Battery operated emergency lighting in the lift car. Emergency Alarm: Alarm button in car operating panel. Fireman switch and fireman control. Voice Synthesizer: Voice announcement system in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the lift. Buffers: As per manufacturer's standard conforming to IS. Counter weight shall be as per design. Main Wire Rope / Belt: As per manufacturer's standard conforming to IS. Landing Door: Automatic Stainless-Steel Centre Opening/Side Opening provided with photocell The Job also includes Civil works like Whitewashing of lift shaft,Waterproofing of Pit and Pit Civil Works.Construction of Overhead as per IS Codes and lintel at entrance of landing door at each floor. Granite façade work at each floor. Any other minor civil/electrical works, including rectification of damages, if any, occurring during repair/installation. .Laying of 6 inch RCC slab at the top to cover the hoist way shaft, along with ISMB 200 load beam at the centre of lift shaft or three no. iron hooks in the slab, or as per OEM recommendations for overhead covering . The necessary chipping of the lift shaft.(as per OEM recommendations)Electrical works in scope of contractor: Providing and fitting of lift shaft electric lighting system along with 16 Amp 3-pin sockets and switches at each floor , lift pit,overhead as per OEM recommendation inside the lift shaft.

Supply, installation, testing & commissioning of 3- phase 10 KVA servo-stabilizer of reputed make with working range of 150-460 Volts AC Phase-Phase including all allied electrical accessories. The stabilizer should have following specifications: Capacity: 10 KVA, 3-phase unbalanced type Input: 100-265V AC P2N; (150-460) V AC P-P Output: 415 V ± 1% - phase to phase Supply: 3 phase, 4 wires, 50Hz Operation: Automatic Duty cycle: continuous Transformer windings: Copper wound on CRGO laminations as per IS specifications. Cooling: Oil cooled (First oil filling provided) Efficiency: Better than 98% at full load Waveform distortions: Nil Overload Capacity: 15% for continuous 4 hours. High speed voltage correction: up to 8V to 20V per second Protections: Under voltage, Over voltage, Overload and short circuit protection. Other features: LED indicators, AC ammeter, AC voltmeter, Frequency meters, Single phase preventer, and Stabilizer by-pass arrangement. The job also includes P/F of 63A 4 Pole MCCB as incomer to the Servo Stabilizer to be provided in CRC Enclosure as per relevent IS Codes.

Providing and Laying of proper chemical earthing (Twin) of all Electro-mechanical components carrying main current, including but not limited to the motor and electric panel complete job as per IS 3043 (1987)

Providing / fitting of 100 amp Change Over Panel comprising copper Bus bar, incoming MCCB outgoing MCCB and on load changeover switch for DG and main supply in a CRC Panel duly powder coated.

Providing and laying of 4 core, 10 sqmm armoured Copper XLPE insulated cable along with thimbles for connecting Power Source, MCCB, Servo Stabilizer to the changeover panel and to the main panel of lift.

Providing / Fitting of 3.5 core, 35 sq mm armoured Al. XLPE insulated cable for connecting power source to Servo stabilizer to 3-phase 4 pole Change Over panel duly thimbled & laid P/c capping upto Change over panel in the tool along with conduits / cable trays & clamps wherever required conforming to IS: 1554

Cost on account of CAMC for 1st year after DLP @5% of Item No1 of BOQ

Cost on account of CAMC for 2nd year after DLP @6% above item no 8 of BOQ

Cost on account of CAMC for 1st year after DLP @5% of Item No. 2 of BOQ