NIT NO. 19 ITEM NO. 06

Renovation/ Improvement of wiring /electrification and other allied works at ZE office near Ramlila Ground by carrying out following works: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group C DSR 1.10.3

Wiring for circuit /submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor. single core cable in surface / recessed PVC conduit as required. 2x 1.5 sq.mm – 1x1.5 sq. mm earth wire DSR 1.14.1

Wiring for circuit /submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor. single core cable in surface / recessed PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire DSR 1.14.3

Wiring for circuit /submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor. single core cable in surface / recessed PVC conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire DSR 1.14.4

Supplying and fixing of 5A to 32A rating, 240 Volts, "C" series Miniature circuit breaker suitable for inductive load of the following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required. DSR 2.10.1 Single pole

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required DSR 2.13.3 (100 amp.)

Supplying and fixing following way prewired vertical type TP&N MCB distribution board of steel sheet for 415 volts on surface/ recess complete with loose wire box of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s, terminal connectors for all incoming and outgoing circuits, duly prewired with adequate size of FRLS PVC insulated copper conductor up to the terminal connector/ neutral link, earthing etc. as required (But without MCB/ RCCB/ Isolator). (Note: Prewired vertical type MCB TPDB is normally used where 3 phase outlets are required.) 12-way Double door.DSR 2.5.3

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pins 5/6- & 15/16-amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. DSR 1.56

Installation, test fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including and commissioning of pre-wired, fluorescent connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required DSR 1.41

Earthing with G.I earth plate 600mmx600mmx3mm thick including accessories, and providing masonry enclosure with cover plate heaving locking arrangement and watering pipe of 2.7 meter long etc with charcoal/ coke/ and salt as reqd DSR 5.4

P/F 25mmx5mm G.I strip in 40 mm dia GI pipe from earth electrode including connection with GI pipe from earth electrode including connection with GI nut , bolts, spring, washer excavation and re-filling etc as required. DSR 5.11

Premier Engineering Company

A.V ENGINEERING

M/s S.R. Enterprise