SPECIAL REPAIRE REPLACEMENT OF BER COOLING APPLIANCES UNDER GE AF NO.2 JODHPUR

S&F of desert cooler of size ≥ 25x25X42 inch, 5000 CuM/Hr, fabricated full body part with GI sheet of thickness 18 SWG, GI sheet having suitable door handle fitted with cooler, heavy duty exhaust type fan motor in three speed mode (Low, medium and high) having ≥ 1400 RPM, Exhaust type copper wound fan blade of 18" size sweep (4 leaves), material of fan blade & hub should be metal type, cooling grass set , front grill with louvers also should be metal type, heavy duty ISI marked submersibile pump having output head 1m height, fan motor are made copper winding, GI wire mesh with pad set size 1x1'' should be made of ≥12 SWG, Whole body should be painted with double coated red oxide paint of good quality, tank capacity should ≥ 150 ltrs complete all as specified and directed by engr in charge.

S&F of desert cooler of size ≥ 25x25X36 inch, 4000 CuM/Hr, fabricated full body part with GI sheet of thickness 18 SWG, GI sheet having suitable door handle fitted with cooler, heavy duty fan motor kit in three speed mode (Low, medium and high) having ≥ 1400 RPM, copper wound fan blade of 18" size sweep (5 leaves), material of fan blade & hub should be metal type,cooling grass set , front grill with louvers also should be metal type, heavy duty ISI marked submersibile pump having output head 1m height, fan motor are made copper winding, GI wire mesh with pad set size 1x1'' should be made of ≥12 SWG, Whole body should be painted with double coated red oxide paint of good quality, tank capacity should ≥ 100 ltrs complete all as specified and directed by engr in charge.

Supply and fixing of heavy duty M.S. stand suitable for 4000/5000 CuM/Hr Desert Air Cooler of size 25" × 25" × 42", fabricated from 40 mm × 40 mm × 5 mm M.S. angle (or equivalent approved section), overall size approximately 30" × 30" × 18" (L × W × H), provided with adequate cross bracing for rigidity and strength. The stand shall be fitted with 4 Nos. M.S. base plates for firm anchoring to the floor, complete with all necessary nuts, bolts and welding. The complete stand shall be cleaned, treated with one coat of red oxide zinc chromate primer and finished with two coats of synthetic enamel paint of approved shade, complete in all respects as specified and directed by the Engineer-in-Charge. Technical Specifications:- Suitable for:4000/ 5000 CuM/Hr Desert Air Cooler Stand Size: 30" × 30" × 18" (L × W × H) Material: M.S. Angle 40 × 40 × 5 mm Cross Members: M.S. Angle/Flat for reinforcement Base Plates: 4 Nos., 75 × 75 × 6 mm minimum Finish: 1 Coat Red Oxide Primer + 2 Coats Synthetic Enamel Paint Fixing: Anchor Fasteners with Nuts & Bolts

"Supply, installation, testing and commissioning (SITC) of 20,000 CFM Industrial Evaporative Air Cooler having air delivery capacity of 20,000 CFM, fabricated with heavy duty UV-stabilized engineering plastic/GI powder coated body, energy efficient direct drive motor (minimum 1.5 HP), high efficiency axial fan, cellulose cooling pads of minimum 100 mm thickness, corrosion resistant water distribution system, suitable water pump, float valve, drain arrangement, louvers, heavy duty stand/frame, complete with all internal wiring, control panel with ON/OFF switch, power cable, necessary accessories, foundation fasteners, interconnection, testing and commissioning, complete in all respects as specified and directed by Engineer-in-Charge." Technical Specifications:- Air Delivery: 20,000 CFM Cooling Media: 100 mm Cellulose Honeycomb Cooling Pads Motor: 1.5 HP, 230V AC, 50 Hz, Copper Winding Fan Type: Heavy Duty Axial Fan Body: UV Stabilized Plastic / Powder Coated Galvanized Steel Water Tank Capacity: Approx. 180–250 Litres Pump: Heavy Duty Submersible Pump Power Supply: 230V AC, Single Phase, 50 Hz Suitable Coverage Area: Approximately 2,500–3,500 sq.ft. Accessories: Float valve, drain plug, water level indicator, control panel, power cable, all fittings and fixtures.

Supply, installation ,testing and commissioning of refrigerator of capacity not less than 322 Ltr, double door electric driven, single phase, minimum 3 star rating, ecofriendly refrigerant, inverter compressor including all accessories complete all as specified and directed

Supply, installation ,testing and commissioning of refrigerator of capacity not less than 246 Ltr, double door electric driven, single phase, minimum 3 star rating, ecofriendly refrigerant, inverter compressor including all accessories complete all as specified and directed

Supply, installation ,testing and commissioning of refrigerator of capacity not less than 224 Ltr, , electric driven riven, single phase, minimum 5 star rating, ecofriendly refrigerant, inverter compressor including all accessories complete all as specified and directed.

Supply, installation ,testing and commissioning of refrigerator of capacity not less than 180 Ltr, electric driven ingle phase, minimum 1 star rating, ecofriendly refrigerant, inverter compressor including all accessories complete all as specified and directed.

Supply, installation, testing and commissioning of 320 Litres Double Door Glass Top Deep Freezer, horizontal chest type, having minimum gross capacity 320 litres, double sliding toughened glass top lids with lock arrangement, corrosion resistant pre-coated GI/PCM steel body, high efficiency hermetically sealed compressor, eco-friendly refrigerant (R-290 or equivalent), adjustable thermostat, heavy duty wire baskets, castor wheels, interior LED illumination, power indicator, suitable for operation on 230V AC, single phase, 50 Hz supply, complete with all standard accessories, testing and commissioning, complete in all respects as specified and directed by Engineer-in-Charge." Typical Technical Specifications:- Capacity: 320 Litres Type: Horizontal Chest Deep Freezer Doors: Double Sliding Toughened Glass Top Body: Pre-coated GI/PCM Steel Compressor: Heavy Duty Hermetically Sealed Refrigerant: R-290 (Eco-friendly) Power Supply: 230V AC, Single Phase, 50 Hz Temperature Range: Approximately +2°C to -24°C (model dependent) Accessories: Wire baskets, castor wheels, door lock, power indicator, adjustable thermostat

Supply, installation, testing and commissioning (SITC) of 200 Litres Double Door Glass Top Deep Freezer, horizontal chest type, having minimum gross capacity of 200 litres, double sliding toughened glass top lids with lock arrangement, pre-coated GI/PCM steel body with corrosion resistant finish, heavy duty hermetically sealed compressor, eco-friendly refrigerant (R-290 or equivalent), adjustable thermostat, temperature range +2°C to -24°C, wire storage basket, castor wheels, interior LED light, power indicator, suitable for operation on 230V AC, single phase, 50 Hz supply, complete with all standard accessories, testing and commissioning, complete in all respects as specified and directed by Engineer-in-Charge.