Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.5 LAccepted-Finance | L1 | Accepted-Finance L1 | |
| 2 | Rejected-Technical | - | Rejected-Technical Technically disqualified. | |
| 3 | Rejected-Technical | - | Rejected-Technical Technically disqualified. | |
| 4 | Rejected-Technical | - | Rejected-Technical Technically disqualified. |
Tender Value
₹3.7 L
Closing Date
22 Jul 2021, 3:00 pmClosed
Regional Director
ESIC Regional Office Thrissur
Special Electrical works and Replacement of Medium Voltage Power distribution Panel Board in ESI Hospital at Thottada, Kannur
2021_ESIC_629465_2
46/SR-E/20-21/RO-KL/ESIH-Tda
Open Tender
Electrical Works
Item Rate
60 days
Thottada
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
Exempted
6 Aug 2021
14 Jul 2021
23 Jul 2021
14 Jul 2021
22 Jul 2021
14 Jul 2021
Amount
Supply ,Installation, testing & commissioning (including minor Civil Works) of cubicle type Indoor Panel suitable for 415V, 3 phase, 4 wire 50 Hz AC supply system fabricated in compartmentalised design from CRCA Sheet steel of 2mm thick for frame work with size of 155cm x 30cm x 185 cm and covers i/c cleaning and finishing complete with powder coating in approved shade with dust and vermin proof, having 400 amps capacity TPN tinned aluminium bus bar of high conductivity, DMC/SMC bus bar supports, control wiring with 2.5 sq.mm. FRLS PVC Insulated copper conductor single core cable, cable alleys, cable gland plates in half, MV danger notice board i/c providing following switch gears complete as per the directions of engineer-in charge.
INCOMING
a) 250 Amps, 36KA 415 Volts,50Hz, 4 pole MCCB with thermal-magnetic based releases for over load & short circuit, extended rotary handle etc. – 1 No.
b) RYB Phase indicating LED lamps with 6ASP MCB protection, Digital VAF meters,CT's- 1 Set.
BUS BARS
TPN Aluminium bus bars of 400 Amps capacity with heat shrinkable coloured sleeves, DMC /SMC bus bar supports at required intervals complete for cross section, size supports and their spacing etc. as per the directions of engineer-in charge.
OUTGOINGS
a) 125 Amps, 36KA 415 Volts, 50Hz, 4 pole MCCB with thermal-magnetic based release for over load & short circuit release, extended rotary handle etc. – 1 No,
b) 100 Amps, 30KA 415 Volts, 50Hz, 4 pole MCCB with thermal-magnetic based release for over load & short circuit release, extended rotary handle etc. – 1 No.
c) 63 Amps, 30KA 415 Volts, 50Hz, 4 pole MCCB with thermal-magnetic based release for over load & short circuit release, extended rotary handle etc. – 9 Nos.
Panel complete as above
Supplying and fixing of 4 way (4 + 12), Double door , Vertical type three pole and neutral, sheet steel, MCCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCCB/MCB/Isolator)
Supplying and fixing of 8 way (4 + 24), Double door , Vertical type three pole and neutral, sheet steel, MCCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCCB/MCB/Isolator)
Supplying and fixing of 63A 4 pole MCCB 16 KA Incomer complete all as specified and as per the directions of engineer-in charge.
Supplying and fixing of 100A 4 pole MCCB 16 KA Incomer complete all as specified and as per the directions of engineer-in charge.
Supplying and fixing of 35 sqmmx3.5 core PVC insulated and PVC sheathed XLPE power Aluminium armoured cable of 1.1 KV grade
Supplying and fixing of 50 sqmmx3.5 core PVC insulated and PVC sheathed XLPE power Aluminium armoured cable of 1.1 KV grade
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole
Triple pole and neutral
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.(Both sides of cable)
3½ X 35 sq. mm (32mm)
3½ X 50 sq. mm (35mm)
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring cable as required.
Dismantling & removing old existing MV panel, restoring the finish and other miscellaneous work.etc
manish enterprises
SATGURU ELECTRICAL ENERGY PVT LTD
Mas Enterprises
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .