Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.6 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹24.4 L+₹2.6 L (12.0%)Rejected-Finance | L2 | Rejected-Finance Second Lowest | |
| 3 | L3₹24.5 L+₹2.7 L (12.5%)Rejected-Finance | L3 | Rejected-Finance Third Lowest |
Tender Value
Refer Docs
EMD Value
₹55,340
Closing Date
12 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major Sameer Wadekar
Holta Cantt, Palampur
PROVN OF ADDN/ALTN TO BLDG NO P-1 AND OTHER SANCTIONED WORKS AT PALAMPUR MIL STN
2022_MES_538390_1
GEP-14/2022-23
Open Tender
Civil Works
Item Rate
180 days
Palampur Mil Stn
As per tender documents
8 documents required · 8 mandatory
₹500
Yes
GE Palampur
₹55,340
Yes
6 Sept 2022
15 Jul 2022
15 Aug 2022
15 Jul 2022
12 Aug 2022
29 Jul 2022
Amount
SCHEDULE 'A' PART-I:- Dismantilng wrought iron or mild steel work of any description not otherwise provided for all as specifed and directed
S&F buffed stainless steel pipe (Matt Finished) of grade SS 304 fixed with Anchor fastener including suitable welding complete al as specified and directed.
S&F 2mm thick plain sheeting fibre glass reinforced translucent with top lap fixed with coach screw and wisher in roof and wall etc complete al as specified and directed.
M&L for plain cement concrete 1:3:6 type C-I (using 20mm graded stone aggregate) as in hold fasts complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floors and paving n. exc 15cm thickness (below or above ground level) complete all as specified and directed.
Demolition of brick work or stone /boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge and thickness in roof covering including Nainital or similar pattern roof coverings, complete all as specified and directed.
M&L for vitrified light shade ceramic tiles 10mm thick (square or rectangular) area of each tile exc 0.36 Sqm but n.exc 0.42 Sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, with and including 15mm thick screed bed in CM 1:6, complete all as specified and directed.
M &L glazed ceramic tiles in vertical surface 450mm x 300mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match 10mm thick screed bed in CM 1:4 on vertical surface of wall complete all as specified directed.
M&L 300mm x 300mm x 10mm endura cool roof SRI tiles (light shade as approved by GE) fixed with spacers over 3 mm thick high polymer modified gray cement based tiles adhesive and grouted with epoxy grout complete all as specified and directed.(SRI value greater than 78)
M&L for non skid cermaic colour tiles 7 to 8mm thick (Square & Rectugular) area of each tile exc 0.06 Sqm but n.exc 0.11Sqm in floor etc set and joint in neat cement slurry and pointed in white or colour cement to match 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1998 grde St-240, complete all as specified.
S&F for Pre-painted galvalume zinc coating alloy based corrugated steel sheet 0.50 thick of an colour having tensile strength of 550 mpa as in roof covering /cladding to wall, fixed with self tapping screw ,complete all as specified.
S&F for Pre-painted galvalume zinc coating alloy based Plain steel sheet 0.50 thick of an colour having tensile strength of 550 mpa as in roof covering /cladding to wall, fixed with self tapping screw, complete all as specified.
M&L preparing new surface of steel any description not other wise described over 10 cm width or girth Two coats of synthetic enamel over a coat of red oxide complete all as specified and directed.
M&L for 12mm thick toughened glass as in partitions,glass doors,Windows all SS fiting required and work stations including all necessary chemicals inculding S/S Handle 450 mm long size of 25 mm dia and S/S pivot and all S/S fiting required making good selicon filling in all gap complete all as specified and directed.
M&L for floor spring for 12mm thick toughened glass door as per cat part no ENOX FH942 and CNR or equivalent with making good existing disturbed surfaces all as directed
M&L for locking arrangement for glass door with stainless steel lock as per Cat part no ENOX 797 or CNR or equivalent all as directed
S&F solar control film 25 micron reflective type sticked to glass panes as per manufactures instruction complete all as specified and directed.
S&F at any height false ceiling of 15mm thick FINE FISSURED board shaped mineral fibre acoustic false ceiling tiles with back of duly sanded and finished with a coat of protective paint and front duly finised of ARMSTRONG/ NITHOBO false system of size 600x600mm T section grid with exposed face almn powder coated white colour. The suspension system consisting of parameter wall angle of size 24x24mm of thickness 0.45mm of GS sheet to secure on walls/ partition face main runner of T shaped section with single rotary stiching of to be spaced at 1200mm c/c runner made from 0.25mm thick GS sheet spaced @ 600mm c/c (1200x600mm) of size modules intermediate T shaped cross runner of size 25x24 mm of length 600mm to form 600x600mm size of modules including suspension of the ceiling frame from RCC roof/ structure frame with soffits and angle cleat and dash fasteners and required members of GI suspender of 4mm dia GI wire and level adjuster all complete and including cost of making opening for light fittings diffuser cut out etc. to required line and shape as per manufacturer recommendation and architectural drg complete all as specified and directed.
S&F PVC wall lining consisting of 5mm thick plain single colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications as specifed and directed
M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed.
M&L for distempering with 1st quality acrylic distemper (ready mixed ) having VOC content less tha n 50 gm/litre of approved manufacturer of required shade and colour complete as per manufacturers specification two or more coats on new work including preparation of surfaces with JK/Birla wall putty complete 2mm thick all as specified and directed.
M&L for appplying two or more coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 :2004, Alkali & fungal resistance dirt resistance exterior paint of required shade ( Company Depot Tinted ) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfacess complete including preparation of surfaces of walls by complete removal of existing treatment all as specified and directed.
S&F PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall ceiling, floor etc 110mm bore of pipecomplete all as specfied and directed.
S&F PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall ceiling, floor etc 75mm bore of pipe complete all as specfied and directed.
S&F PVC (SWR) bends of any radius for 110mm bore pipe complete all as specifed and directed.
S&F PVC (SWR) bends of any radius for 110mm bore pipe complete all as specifed and directed.
S&F PVC 75 mm floor trap with grating inculding jointing with solvent cement complete all as specifed and directed.
S&F PVC 75 mm vent cowal complete all as specifed and directed.
S&F stack clamps out of (50mmx5mm) flat iron and 12mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for pipe 100mm bore complete all as specifed and directed.
S&F stack clamps out of (50mmx5mm) flat iron and 12mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for pipe 75mm bore complete all as specifed and directed.
S&F 15mm bore bib taps cast copper alloy, chromium plated fancy type ISI marked with crutch or butterfly handle screwed down screwed for iron pipe or for union and fixed complete all as specified and directed.
S&F 15mm bore CP brass angular stop cock screwed for iron pipe or ferrule and fixed complete all as specified and directed.
S&F 15mm bore CP central hole basin mixer popup waste system with 450mm long copper pipe and brass nuts ISI Marked complete all as specified and directed.
S&F tubular towel rail, brass chrominum plated 20 mm dia D type 60 cm long between flange complete all as specified and directed.
S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf corner with chromium plated bracket guard and with chromium plated bracket guard and railing 6" dia fixed with screws complete all as specified and directed.
S&F PVC bathroom cabinet of size 50cm x 41cm with hinged door an locking arrangement with built in shelves and looking mirror fixed in cabinet door and fixed to wall as per manufacturers instruction complete all as directed and directed.
S&F chromium plated toilet paper holder standared quality complete all as specified and directed
S&F health faucet with 1200mm long flexible mild steel tube with wall hook and chromium plated stop valve complete complete all as specified and directed.
S&F soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F 15mm bore medium grade (ISI maked) galvanised steel water tubing with all fitting fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
S&F 20mm bore medium grade (ISI maked) galvanised steel water tubing with all fitting fixed complete to wall and ceiling or laid in floors as approved and directed. complete all as specified and directed.
S&F ISI marked 500 Litre capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20/25mm ball brass float valve high pressure complete all as specified and directed.
S&F single piece WC with PP Close Seat cover hinges dual flush cistern fitting fixing accessories And Accessories set size 360mm x 640mm x 685mm S Trap 110mm complete all as specified and directed.
S&F ceramic white cabinet wash hand basin of size 550mm x 400mm ,CP waste coupling, chain and plug, porcelain stopper, PVC connection complete all as specified and directed.
S&F 20mm bore stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union, complete all as specified and directed.
S&F aluminium anodised powder coated window and ventilator shutters, fixed type/slinding type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specifed
S&F aluminium anodised powder coated chowkhats frames for doors, windows, ventilators, partition with one or more rebates including joining cleat for fixing etc complete all as specifed
S&F 5.5mm thick ordinary quality sheet glass fixed to aluminium frame of partition etc fixed with rubber gasket & aluminium powder coated snap beading etc Complete all as specifed and directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directeed.
Excavating over areas, n exc 1.5 m deep and getting out in any type of soil complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed.
M&L for plain cement concrete, 1:4:8 (Nominal Mix) type D-2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete etc, complete all as all as specified and directed.
M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.
M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
S&F for solid PVC door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.
S&F for 75mm size butt hinges medium weight, cold rolled MS and fixed complete all as specified and directed.
S&F for 150mm size aluminium anodised, barrel tower bolts, of extruded section and fixed complete all as specified and directed.
S&F for 150mm size handles extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.
S&F for tubular towel rail 20mm dia, brass chromium plated 600mm long fixed in position with screws, complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregates as coping including weathering, slightly rounded, chamfered angles and finishing exposed surface even and smooth including necessary form work complete all as specified and directed.
M&L for reinforced cment concrete type B1 1:2:4 (20mm graded crushed stone aggregates) as in lintels complete all as specified and directed.
M&L for TMT bars mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L mild steel bars 5 mm dia and over upto and including 10 mm dia in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to TMT bars, complete all as specified and directed.
S&F for steel tubes, 15 mm bore, galvanised, 'medium grade' with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specifed and directed.
S&F for steel tubes, 20 mm bore, galvanised, 'medium grade' with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specifed and directed.
S&F vitreous china coloured wash down water closet pan (Pedestal Pattern) including connection to flush pipe, 'P' or 'S' trap, with fixing bolts PVC seat cover with chromium plated mild steel hinges device (excluding flushing cistern and flush pipe), complete all as specified and directed.
S&F 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia. PVC flushing pipe, PVC connection 15 mm size with PTMT nuts of length 450 mm and with CP brass coupling & PVC washer at both ends, complete all as specified and directed.
S&F viterous china, wash hand basin, (white) of size 550 mm x 400 mm including brass CP waste coupling 32 mm dia with long screwed shank and fly nuts, PVC, medium grade 32 mm dia waste pipe, chain and plug, porcelain stopper, PVC connection 15 mm dia, 450 mm long with brass CP nuts and washers at both ends, complete all as specified and directed.
S&F for pillar tap for 15mm bore cast copper alloy, with capstan heads chromium plated screwed down high pressure with or without lettered 'Hot and Clold with long screwed shanks and fly-nuts screwed for iron pipes complete all as specifeid and directed.
S&F for bib cock CP for 15mm bore fancy type long body, cast copper alloy, screwed down, screwed for iron pipe or brass ferrule and complete all as directed.
S&F soap dish any type fixed to plugs with chromium plated brass screws all as specifed and directed.
S&F for rotational moulded polyethylene water storage tank 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, incl ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
S&F for brass chromium plated shower rose 125mm size fixed in position, complete all as specified and directed.
S&F for 20mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed completed all as specified.
M&L for 50 mm thick PCC 1:3:6, type C-2 (Using 20 mm graded crushed stone aggregate) as in plinth protection etc and finished even without using extra cement,complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed.
M&L for concrete bed to drain pipes 100/110mm including packing under and completely surrounding pipes with concrete after they are laid and tested; in cement concerte 1:3:6 complete all as specified and directed.
S&F for PVC (SWR) bends of 75mm bore pipe, omplete all as specified and directed.
S&F for PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to wall, ceiling, floors etc, 110mm bore of pipe, complete all as specified and directed.
S&F for PVC (SWR) vent cowl 100/110 mm bore dia, complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed.
Removal of excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Construction of soakage well of size 1.2m dia and 3.00m deep below inlet pipe level (depth from inlet pipe to ground level 45cm) including excavation & earth work in any type of soil, filled with brick bats, RCC as in slab including RCC manhole cover factory made ISI marked conforming to IS-12592 with angle iron frame, SWG single junction inlet, filling around slab in slopes and disposal of surplus soil to a distance exc 50m but not exc 100m complete all as specified and shown on drawing No CEPZ/C-TD-013/13 dated 11.09.2013, Sheet No 1/5 to 5/5.
Preparation new plastered or unplastered surfaces of brick/ stone Masonry surfaces and applying two coats of white wash/colour washing (as approved by GE/Engr in Charge) ,complete all as specified and directed.
Preparation new plastered or unplastered surfaces of brick/ stone Masonry surfaces and applying two coats of cement based paint ,complete all as specified and directed.
S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket raming (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.
S&F for compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. complete all as specified and directed.
S&F for steel ventilator with top hung shutter including hinges, steel peg stay, incl glazing ( sheet glass 3mm thick ordinary quality fixed with glazing putty in each pan etc.) with two coats of synthetic enamel paint over a coat of red oxide primer over new steel surfaces, complete all as specified and directed.
M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 10cm and n exc 15cm long dia of neck 11mm to 15mm, complete all as specified and directed.
M&L second class plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified complete all as specified and directed.
M&L for second class soft wood plain fillets square, rectangular or triangular in section, clean sawn exc 13 and n exc 25 sqcm secured with nails complete all as specified and directed.
M&L plain fillets square or rectangular in section bull nosed chamfered or rounded or rounded on one edge or face with nails sectional area exc 3 sqcm but n exc 6 sqcm 2nd class soft wood kail, complete all as specified and directed.
S&F 4mm thick asbestos cement plain building boards fixed to timber ftame work fixed with screws complete all as specified and directed.
S&F vitreous china bowl urinal flat back , size 465mm x 355mm x 265mm white (minimum), including grating and union for discharge pipe excluding flushing cistern, flush pipe and waste pipe, complete including providing and fixing plugs, bedding urinal against wall in CM 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern brackets, flush pipe grating and union for discharge complete all as specified and directed.
Construction of septic tank for 10 users brick contruction (with top of slab at ground level) including excavation and earth work in any type of soil and disposal of surplus soil to a distance not exc 50m, brick work with sub class 'B' bricks built in CM 1:4, RCC as in slab including RCC manhole cover factory made ISI marked conforming to IS-12592 with angle iron frame, 100mm bore cast iron sand cast vent pipe with cast iron cowl complete all as specified and shown on drawing No CEPZ/C-TD-013/13 dated 11.09.2013, Sheet No 1/5 to 5/5.
M&L for 100mm thick cement concrete 1:3:6 using 40mm graded aggregate for receiving floor finishes etc., complete all as specified and directed.
M&L for 50mm thick Cement concrete type B-1, 1:2:4 (20mm graded crushed stone aggregate) as in path/ hardstanding over sub base complete all as specified and directed.
SCHEDULE 'A' PART-II:- Taking down old unserviceable copper / aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.
Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed.
Taking down un-serviceable sub main wiring of any type and any size from wall, ceiling etc. complete all as specified and directed.
M&L for point wiring for one light/fan/call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLSH, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 sqmm copper conductor multistrand FRLSH, PVC insulated (unsheathed) drawn into and including new concealed PVC rigid / 1.8mm wall thickness ISI marked including pressed steel with existing colour terminated boxes of Modular Metal flush Boxes of any way i.e. (1 to 8 way as per site requirement) for mounting switches, sockets, fan regulators etc complete all as specified and directed . Note:-(a) Wiring shall be done by using proper colour coding (b) Earth wire shall be of green colour and neutral shall be black (c) On RCC roof/celing PVC conduit shall be provided on surface with proper fixing clamps all as directed..
All as per the description of serial item No 107 here-in-before but 5 Amp socket outlet on same board complete all as specified and directed.
All as per the description of serial item No 107 here-in-before but socket outlet 5 Amps independent board complete all as specified and directed.
All as per the description of serial item No 107 here-in-before but for one 6 pin socket outlet 15 Amps on independent board with cables 2.5 sqmm size complete all as specified and directed.
S&F angle lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
S&F bell, AC 230 Volts, single pole complete all as specified and directed.
S&F modular bell push flush type single pole one way 5 amp complete all as specified and directed.
S&F modular stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required complete all as specified and directed.
S&F modular switch 1 way 6 A,1 module, 240 volts ISI marked complete all as specified and directed.
S&F modular switch 1 way 16 A, 1 module, 240 volts ISI marked complete all as specified and directed.
S&F modular Socket, 6A-2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed.
S&F modular Socket 6A/16A-2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed.
S&F modular Fan step regulator, 120W 1 module, 240 volts ISI marked complete all as specified and directed.
S&F exhaust fan made of engineering plastic complete with louvers shutter ,voltage 230v,50 Hz RPM 1200mm copper winding of sweep 300mm complete all as specified & directed.
S&F Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified
S&F in replacement surface/wall mounted light fitting pre wired suitable for single T8 LED tube along with supply and fixing one number LED tube in polycarbonate housing of nominal wattage-18 Watt, Lumen out put-2100 Lm, Colour Temp-6500 Kelvin, Size & Length-G13/ T8/ 4 Feet with integral/in built driver, having short circuit and surge protection including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed. MAKE:- Cat Part No for batten:- STREAKT8UPTO 1X22WSSBSWH of make Havells 'or' IGP161LT8-16 of make Crompton 'or' TMC501 P 1xT-LED 22W P3241 of make Philips or its equivalent as approved . Cat Part No for Tubelight:- PHOTANULTRAE2.0 1213T8SSTL18WLED865SPC of make Havells 'or' LTT8-20 of make Crompton 'or' MAS LED tube 1200MM 18W865 T8 I-2100 lm of make Philips or its equivalent as approved
S&F in replacement of existing worn out ceiling light with enviromental friendly, new generation, aesthetically designed, ultra modern recessed mounted LED light luminaries of size 595 mm x 595 mm an independent Isolated, electronic LED driver (SMPS based constant current supply) housed in CRCA powder coated sheet of system wattage - 36/40/42 Watt, Lumen out put- 4000-4300 Lm, THD < 10%, PF > 0.9, having short circuit and surge protection suitable for Armstrong/ Grid ceiling with all connected accessories including making connection with three core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed. Make:-Cat pt No: PLUTONEO2X2PLR42WLED857S of make Havells 'or' RC380B LED36S-4000 G4 L60 W60 PSD OD WH OC of make Philips 'or' LCTTLRP-36-FO-CDL of make Crompton or its equivalent as approved.
M&L for replacement distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and directed. Note:- Distribution board and MCB's should be same make.
S&F in replacement 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
Supply and fixing in replacement of SPN 40 to 63 Amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
M&L in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 4 Sq mm for phase and neutral and one run of 4 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and directed. Note: Wiring shall be done in proper colour coding.
M&L for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sq mm for phase and neutral and one run of 6.0 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. NOTE:-Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and directed. Note:- Wiring shall be done in proper colour coding.
M&L for point wiring for one light/fan/call bell point controlled by one 6 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 sqmm copper conductor multistrand FRLSH, PVC insulated (unsheathed) drawn into and including new concealed PVC rigid conduit medium grade ISI marked including new CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and as directed. Note : (a) Wiring shall be done by using proper colour coding.(b) Earth wire shall be of green colour. (c) On RCC roof/celing PVC conduit shall be provided on surface with proper fixing clamps all as directed.
All as per the description of serial item No 129 here-in-before but for one 6 pin socket outlet 16 Amps on independent board with cables 2.5 sqmm size complete all as specified and directed.
S&F switch piano, flush type single pole, one way 6 Amps, 240 volts ISI marked complete all as specified and directed.
S&F socket outlet 3 pin, 16 Amp, flush type, 240 Volts, 6 pin flush type complete ISI marked complete all as specified and directed.
S&F switch piano, flush type single pole, one way 16 Amps, 240 volts ISI marked complete all as specified and directed.
S&F ceiling rose, 3 terminal surface type complete all as specified and directed.
S&F LED Bulb 9 watt with angle lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
Supply & fixing surface /wall mounted light fitting pre wired suitable for single T8 LED tube along with supply and fixing one number LED tube in polycarbonate housing of nominal wattage - 18 Watt, Lumen out put - 2100 Lm, Colour Temp - 6500 Kelvin, Size & Length - G13/ T8/ 4 Feet with integral/in built driver, having short circuit and surge protection including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed.Cat Part No for batten:- STREAKT8UPTO 1X22WSSBSWH of make Havells 'or' IGP161LT8-16 of make Crompton 'or' TMC501 P 1xT-LED 22W P3241 of make Philips or its equivalent as approved .Cat Part No for Tubelight:- PHOTANULTRAE2.0 1213T8SSTL18WLED865SPC of make Havells 'or' LTT8-20 of make Crompton 'or' MAS LEDtube 1200MM 18W865 T8 I-2100 lm of make Philips or its equivalent as approved
S&F distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 4 way 240 volts double door complete all as specified and directed. Note:- Distribution board and MCB's should be same make.
S&F in replacement 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
Supply and fixing in replacement of SPN 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed.
Supply and installation of electric storage water heater (vertical type geyser minimum 5 star rating, 25 ltr capacity, 240 V, AC single phase having stainless steel inner tank incl heavy duty pin type fasteners 4" long as per site requirement including plug in top 15 amp ,NRV,pressure release valve ,safety valve complete all as specified.
Supply And fixing LED street light fitting 35 watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
Supply and fixing PVC water connection pipe 15mm size with PTMT nuts of length 450mm for inlet & outlet connection (cold & hot water ) complete all as specified.
Supply and fix GI water tubing medium grade 15mm bore with all fittings fixed in walls/floor complete as specified.
Supply and fix 15 mm bore stop valves, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union etc complete all as specified.
Supply and fix bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified.
M&L for cutting of existing 25/32 mm bore GI pipe in position for making addition alterationfor making branch connection of size 20 mm dia bore complete all as specified.
M&L for threading of existing 25/32 mm bore GI pipe in position for making addition/ alteration/ drawing branch connection of size 20 mm dia bore complete all as specified & directed.
S&F ball vales high pressure of PTMT with epoxy coated Aluminium rod and plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms) complete all as specified & directed.
M&L earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth wire 4.00 dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 20 mm bore light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed by Engineer-in-charge. NOTE :(i) The concrete pit shall be PCC 1:3:6 type C-2, 20 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-( ii) Item includes the cost of GI pipe up to 7.5m for protection of earth wire. Any variation in length beyond 7.50 m shall be measured separately.(iii) Item includes cost of earth wire up to 7.5 m Any variation in length beyond 7.50 m shall be measured separately.(iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemeuded in the unit rate.
S&F Steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenchs/floors/wall complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) all as specified of the 20mm size complete all as specified & directed.
Supply and fixing gun-metal, globe or gate valves, heavy duty, with iron wheel head, screwed both ends (ISI marked) of 20mm dia complete all as specified & directed.
M&L for cutting of existing pipe line & making branch connection by inserting of Tee of required dia etc complete.
Supply & laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm, 2 core complete all as specified and directed.
Excavation in trenches n exc 1.5 m wide and n exc 1.5 mtr in depth for foundation laying of under ground cable erecting of pole stay not exc 10 sqm on plain and not exc 1.5 m depth and getting out in any type of soil complete all as specified and directed.
Returning, filling in (soil ) including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil complete all as specified and directed.
Removal of excavated material (soil) to a distance n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed.
M&L for sand cushioning to under ground cable with a layer of sand 8 cm before laying the cable and 15cm after laying the cable (10 cm punned thickness above the top of the upper most cable, total 18 cm), complete all as specified and directed.
M&L for sub class ‘B’ brick old size protection cover laid dry flat transversally along the length of cable on cushioning with width equal to the length of brick complete all as specified and directed.
Material and labour for GI tubing (light grade) with all fitting laid in trenches or along pole/bldg or under road crossing and protection pipe or fixed alongwith wall/pole with necessary clamp nut bolt and washer bore of pipe 40mm complete all as specified and directed.
BHARDWAJ BUILDERS
M/s ASS Construction Co
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .