REPAIR TO SEWAGE PUMP HOUSES AND SEWAGE SUMP UNDER AGE EM OF GE (A) AHMEDABAD

Amount

Removing of existing un-serviceable water proofing treatment , taking down cement plaster etc, of any description and claening of top surfaces of cement concrete flushing out junction of parapet walls and washing down with water complete all as specified and directed.

M&L for water proofing treatment to non accessible RCC roofs by providing 10mm thick screed in CM 1:3 mixed with & including water proofing compound @ 3% by weight of cement & applying one coat of bituminous primer @ 0.30 kg/sqm & laying APP based polymer modified membrane with polyster non woven reinforced of weight not less than 3 kg/sqm 3mm thick with polythene finished sealing with side over laps of 75mm & 100mm laps at the ends of membrane by torch application method & applying two coats of aluminium paint complete

Taking down chowkats or frame with shutters ( without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 sqm each complete all as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

S&F mild steel angle iron work as Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections and MS Sheet chequred) including distance pieces, cleats etc also fastening and fixing complete Fe290 (Gde-E-165)

S&F Mild steel butt hinges medium weight 100mm long complete all as specified and directed.

M&L for 150mm long extructed aluminium handle fabricated type complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section 150 mm size complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed.

S&F factory made solid PVC door, cup board shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded both side prelaminated PVC 'C' channel having a prelaminated PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & b PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail, lock rail & bottom rail panelling of both side prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specification & diagram/product drawing shown on ser page No 156 of SSR Part II complete all as specified and directed & directed

S&F solid PVC door, cup board frame size 50mmx47mm made out of 5mm prelaminated PVC sheet reinforced with MS square tube all as per specification and as per drawing shown on ser page No 150 of SSR Part II (for item 884) complete all as specified and directed and directed

S&F Stainless steel wire cloth 0.36mm normal dia of wire and average width of aparture 1.40mm and fixed with tinned tacks or Stainless steel wire stapples complete all as specified and directed.

S&F steel windows with side hung shutters glazed or gauged including projection type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welding complete as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

S & F Sheet glass ordinary quality and glazing with oil putty in square n exe 0.5 sq m in each pane (Thickness in 3.00mm)

S&F 3mm thick frosted glass panes and glazing with oil putty & pins/spring pins complete in squares n.exc 0.50 sqm each panes complete all as specified and directed.

S & F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass including necessary channel frame work, including rubber gasket and frame with wire mesh of aluminium,and deco grill ,aluminium beading complete all as specified and as directed.

Preparation of new or previously untreated wooden surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamal paint over a coat of pink primer complete all as specified.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over incl screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete all as specified and directed.

M & L 15 mm plaster with Polymer Modified Mortor fortified with SBR ( Nitobond SBR 45 ) of FOSROC /Pidilite in proporation 1 (Cement) : 3 (Sand) by weight 5 litres Nito Bond SBR 45 to be added to 50 Kg Cement with 11 to 15 litre water addition, finished surface to match with existing adjoining surface complete incl scaffolding as required. Note: (i)Rate quoted shall deemed to be inclusive of proper scaffolding/saftey measures and tools etc. Dept shall not compromise any deviation on this safety measures (ii) No work shall be progressed without proper safety measures and proper Insurance shall be produced to the dept before commencing the work.

M&L for Glazed ceramic coloured tiles in vertical surface 450 x 350 x 7mm thick set and jointd in neat cement slurry and pointed in whie or coloured cement to match pigment over and including 10mm thick CM (1:4) backing coat Tiles shall be of grade B-III as per IS-13712 (1993) of First quality all as specified & directed

M&L machine cut Kota stone slab 20-25 mm thick as in flooring or trades of step or shelvesetc incl half round moulding over and including screed bed 20 mm thick in CM (1:3) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing.

M&L for 60mm thick Machine pressed precast concrete interlocking paver block glossy finish any shape and size with grey cement and no pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade

M&L for Sand filling under floors or in foundations including watering and consolidation

M&L for pre Polished Chequered cement concrete tiles 30cm x 30cm x25mm thick glossy finish on horizontal surfaces,set, jointed and pointed in neat cement slurry in floors incl 15mm thick screed bed CM 1:6

M&L for 25 mm thick PCC type B-0 (1:2:4) using 12.5 mm aggreage as in floor finished even and rough to received top layer or tiling.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials where complete all as specified and directed.

M&L for cement concrete 1:3:6 type C2 (using 40mm graded aggregate) in foundation filling & mass concrete as in post.

M&L PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in, levelling coarse complete all as speificed and directed

M & L75 mm thick plain cement concrete type D-2 1:4:8 (40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C2 as in plinth protection/footpath using 40mm graded stone aggregate finishing cement concrete surface even & smooth without using extra cement including impression and glass strip or bitumen filling in two panel etc complete all as specified and as directed.

Preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamal paint over a coat of red oxide primer complete all as specified.

Demolition of Brick work or stone/boulder masonry, build in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6

M&L for Reinforced cement concreteype B0 1:2:4 (12.5mm graded aggregate (nominal mix) in Columns, pillars, piers, posts and struts complete all as speificed and directed

Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM (1:4) finished even and fair without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on any faces of brick work in CM1:6, finished even and fair.

M & L for 5mm thick rendering on cement concrete as in ceiling with cement mortaar 1:3

M&L for preparation of new surfaces of ceiling plastered/AC sheet and applying three coat of white wash complete all as specified

M&L complete removal of existing treatment of ceiling and applying three coats of white washing complete all as specified and directed.

M&L preparing newly plastered or unplastered surface of wall and applying three coats of white washing complete all as specified and directed.

Excavating in trenches, n.exc 1.5m wide & n.exc 1.5m in depth; for foundation, etc or for shafts, wells, esspits, manholes, pier holes, etc. nexc 10 sq m on plan & n exc 1.5 m in depth & getting out getting out in soft/loose soil

M&L complete removal of existing treatment and applying three coat of white washing on wall surface complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

Complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces.

Dismanting of PVC water tanks or any description and at any position and removing to store/ removing from site.

(a) Exc 250 ltrs and n.exc 500 ltrs capacity.

S & F 500 ltrs rotational moulded polyethelene water storage tanks (cyclindrical vertical with closed top) incl connecting up pipes securing access covers etc as specified and as directed

S&F in repair vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rest complete incl provision of lime concrete bedding.

S&F 10 ltrs capacity PVC valve less, syphonic action type flusing cistern, low level white with inlet ball valve float and handle including brackets fixed in repairs complete all as specified and directed.

M&l for Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread & leveled in layers n exc. 15 cm thick, watered & rammed to a true surface

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour as approved by GE and having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws.

Dismantling of fencing, wire mesh of any description and in any position complete.

Dismantling posts or struts (wood, steel or RCC) any section incl taking out embedded portion and making good disturbed ground (post embedded in PCC)

Excavation in post hole for similar holes each n exc 0.50Cum getting out returning filling in and ramming earth around in layers nexc 25 cm watering and removed surplus soil to a distance nexc 50m and making good surface in soft/loose soil.

M & L for cement concrete 1:3:6 type C2 using (40mm graded stone aggregate) as in foundation filling mass concrete complete all as specified

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh/welded steel wire fabric etc) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165

S&F screw bolts (machine made) with hexagonal or square head at one head and rounded the other or screwed both end each screwed end to be fitted with washers and one hexagonal or square nut exc 10cm nexc 15cm long dia of shank 11 to 15mm.

Fixing only chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire. complete all as specified and directed.

Supply only chainlink fencing any having aperture 50x 50 mm size any type etc complete all as specified and directed.

Supply only mild steel round bars of 10 mm dia as in line wire cut lengths, Hooking ends etc conforming to Fe- 410 - W (Gde E-250) quality A (For tying chain link fencing complete all as specified and directed

M&L for preparation of new untreated steel and iron surfaces of any description, not exc. 10 cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red complete all as specified and directed.

S & F galvanised two strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts incl securing or laying at crossing with and provision of mild steel wire staples or steel pins etc complete all as specified and directed.

M & L for preparation of new steel surfaces exc 10cm width or girth and apply one coats of synthetic enamel paint over a coat of red oxide primer complete.

M & L for preparation of Old steel surfaces exc 10cm width or girth and apply one coats of synthetic enamel paint over a coat of red oxide primer complete.

Returning, filling in, including spreading, leveling, watering & well ramming in layer s not exc 25 cm in hard /dense soil complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

SNEH TRADERS

Shree Krushna Supply Corporation

RISING ELECTRICALS