Special Repairs Work of PI/PSI Barrack, Administration Building at Commando Training Center Khalal Dist: Kheda.

NAME OF WORK:-Special Repairs Work of PI/PSI Barrack,Addministration Building at Commando Training Center

Khalal Dist:Kheda.

STATEMENT SHOWING AT APROXIMATE A QUANTITY FOR THE ITEM OF ABOVE WORK TO BE CARRIED OUT AND APPROXIMATE COST PUT TO THE TENDER

ITEM NO Description QUANTITY Unit RATE IN FIGURE RATE IN WORD Amount

1 Demolition & disposal of unserviceable material.Disposing all lead 91.00 cmt 587.48 Five hundred eighty-

and lift(ii)Unreinforced cement concrete seven and forty-eight

2 Dismentaling of tile or stone floor slaid in mortar incl. stacking of 1229.00 smt 46.31 Forty-six and thirty-one

servicable material and disposal of unservicable material with hundredths.

disposing all lead and lift.

3 Removing and scrapping of old deteriorated plaster of any 684.00 smt 18.75 Eighteen Rupees and

thickness from Masonry wall/R.C.C member including stacking of Seventy Five Paise

serviceable material and disposal of unserviceable from site of work

with disposing all lead and lift

4 Removing dry or oil bound distemper by a washing and scraping 2826.00 smt 10.88 Ten Rupees and Eighty

and sand papering the wall surface smooth including necessary Eight Paise

repairs to scratches complete.

5 Provinding 10mm thick cement PLASTER in single coat on 31.00 smt 215.31 Two Hundred Fifteen

CEILING for interior plastering and finished even and smooth in Rupees and Thirty One

C.M.1:3(1 cement:3 sand)including finishing with floating coat of

neat cement at Ground Floor. Paise

6 Provinding 10mm thick cement PLASTER in single coat on 31.00 smt 240.53 Two Hundred Forty

CEILING for interior plastering and finished even and smooth in Rupees and Fifty Three

C.M.1:3 (1 cement:3 sand)including finishing with floating coat of

neat cement at First Floor. Paise

7 Provinding 10mm thick cement PLASTER in single coat on 31.00 smt 265.75 Two Hundred Sixty Five

CEILING for interior plastering and finished even and smooth in Rupees and Seventy

C.M.1:3 (1 cement:3 sand)including finishing with floating coat of

neat cement at Second Floor. Five Paise

8 Provinding 10mm thick cement PLASTER in single coat on 31.00 smt 290.97 Two Hundred Ninety

CEILING for interior plastering and finished even and smooth in Rupees and Ninety

C.M.1:3 (1 cement:3 sand)including finishing with floating coat of

neat cement at Third Floor. Seven Paise

9 Provinding 15mm thick cement PLASTER in single coat on BRICK 35.00 smt 219.41 Two Hundred Nineteen

or CONCRETE wall for interior plastering and finished even and Rupees and Forty One

smooth in C.M.1:4(1 cement: 4 sand) including finishing with floating

coat of neat cement slurry at GROUND FLOOR. Paise

10 Provinding 15mm thick cement PLASTER in single coat on BRICK 35.00 smt 246.52 Two Hundred Forty Six

or CONCRETE wall for interior plastering and finished even and Rupees and Fifty Two

smooth in C.M.1:4(1 cement: 4 sand) including finishing with floating

coat of neat cement slurry at FIRST FLOOR. Paise

11 Provinding 15mm thick cement PLASTER in single coat on BRICK 18.00 smt 273.63 Two Hundred Seventy

or CONCRETE wall for interior plastering and finished even and Three Rupees and Sixty

smooth in C.M.1:4(1 cement: 4 sand) including finishing with floating

coat of neat cement slurry at SECOND FLOOR. Three Paise

12 Provinding 15mm thick cement PLASTER in single coat on BRICK 18.00 smt 300.74 Three Hundred Rupees

or CONCRETE wall for interior plastering and finished even and and Seventy Four Paise

smooth in C.M.1:4(1 cement: 4 sand) including finishing with floating

coat of neat cement slurry at THIRD FLOOR.

13 Provinding 20 mm thick SAND FACED cement PLASTER on walls 522.00 smt 332.33 Three Hundred Thirty

above ground level consisting 12 mm thick backing coat of C.M. 1: Two Rupees and Thirty

3 ( 1 cement : 3 sand ) and 8mm thock finishing coat of C.M. 1:1 (

cement : 1 sand ) etc. Complete for any height. Sand face plaster Three Paise

shall be carried by using GUTKA only.

14 Finishing Ceiling / Slope Surfaces with Plastic Emulsion Paint on 123.00 smt 188.49 One Hundred Eighty

Ceiling / Slope Surfaces (Two Coats) to give an Required shape Eight Rupees and Forty

and even shade after thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials and finishing smooth Nine Paise

etc. complete. Rate are inclussive of Applying Two Coats of Lappy

(Putty) and One Coat of Primer on New Wall Surfaces to give an

even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered

smooth. (Fine Putty Shall be of Bison Wall Putty of Berger Paint

India Ltd or Trucare Wall Putty of Asian Paint or Dulux Polly Putty

of Dulux Paint Only and Primer shall be of BP White Primer of

Berger Paint India Ltd or Asian Paint Trucare Interior Primer of

Asian Paint or Interior Sealer A 500 of Dulux Paint Only and Plastic

Emulsion Paint Shall be of Rangoli Total Care of Berger Paint India

Ltd or Apcolite Premium Emulsion of Asian Paint or Dulux Interior A

900 of Dulux Paint Only.) etc. Complete for ration (5 bar pre

ITEM NO Description QUANTITY Unit RATE IN FIGURE RATE IN WORD Amount

15 Finishing Walls with Plastic Emulsion Paint on Wall Surfaces 122.00 smt 176.01 One Hundred Seventy

(Twocoats) to give an Required shape and even shade after Six Rupees and One

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials and finishing smooth etc. complete. Rate Paise

are inclussive of Applying Two Coats of Lappy (Putty) and One Coat

of Primer on New Wall Surfaces to give an even shade including

throughly brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth. (Fine Putty Shall be of

Bison Wall Putty of Berger Paint India Ltd or Trucare Wall Putty of

Asian Paint or Dulux Polly Putty of Dulux Paint Only and Primer

shall be of BP White Primer of Berger Paint India Ltd or Asian Paint

Trucare Interior Primer of Asian Paint or Interior Sealer A 500 of

Dulux Paint Only and Plastic Emulsion Paint Shall be of Rangoli

Total Care of Berger Paint India Ltd or Apcolite Premium Emulsion

of Asian Paint or Dulux Interior A 900 of Dulux Paint Only.) etc.

Complete for ALL FLOORS.

16 Finishing wall with weather proof exterior emulsion paint on wall 2582.00 smt 147.68 One Hundred Forty

surface (two coats) to give an required shape even shade after Seven Rupees and Sixty

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete (Finished surface shall be Eight Paise

accepted to Engineer in charge / Architect, No additional payment

shall be made for additional coats to achieve the same) (Material to

be used Shall be as per approved make list of GSPHCL Only)

17 Providing and laying Granite slab(18mm thick)one side polished 6.00 smt 2128.80 Two Thousand One

flooring over 20mm (average) base of cement mortar 1:6 (1cement Hundred Twenty Eight

: 6 coarse sand) or L.M 1:1.5 laid jointed with grey cement slurry

including rubbing and polishing complete and as per drg. Rupees and Eighty

18 Providing and laying 25mm thick Polished Kota Stone Slab Flooring 3.00 smt 1078.70 One Thousand Seventy

over 20mm average th base of cement mortar 1:6( 1 cement:6 Eight Rupees and

coarse sand)laid over & jointed with grey cement slurry including

rubbing & polishing etc. Complete. Seventy Paise

19 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm 368.00 smt 1383.99 One Thousand Three

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on Hundred Eighty Three

new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color Rupees and Ninety

cement slurry including finised with flush pointing & cleaning the Nine Paise

surface etc. complete for antiskit

20 Providing & laying Printed / Coloured Glazed 8mm thick TILES in 417.00 smt 1403.33 One Thousand Four

skirting, risers of steps and DADO on 10mm thick cement plaster 1: Hundred Three Rupees

3 ( 1 cement : 3 coarse sand ) & jointed with white cement slurry. (

Size of Tiles shall be 600 mm x 300mm ) for all Floors. Size & and Thirty Three Paise

Shade of tiles shall be as per Approved Architecture drawing & as

per direction of Engineer in charge.

21 Providing 10mm thick WATER PROOF cement plaster in single 563.00 smt 252.78 Two Hundred Fifty Two

coat on fair side brick work or concrete wall for interior plastering Rupees and Seventy

upto floor to level and finishing even smooth in cemented mortar

1:3(1 cement :3 sand) finished with floting coat of neat cemente Eight Paise

slurry including providing and mixing water proofing materials in

proportion recommended by the manufacturers for all floor.

22 Providing and making CEMENT VATA(10cmx10cm)size quarter 47.00 rmt 23.45 Twenty Three Rupees

round in cement mortar 1:1 including neat cement finishing, and Forty Five Paise

watering etc. Complete.

23 Providing and filling light weight filling material(CINDER) an 106.00 cmt 791.68 Seven Hundred Ninety

approved in sunk slabs or as may be directed at all floors including One Rupees and Sixty

watering, consolidation etc.. Complete.

24 Providing and laying cement concrete flooring 1:2:4 ( 1 cement : 2 303.00 smt 348.08 Three Hundred Forty

course sand :4 graded stone aggregate 20mm nominal size) laid in Eight Rupees and Eight

one layer finished with a floating coat of neat cement. (B) 50 mm

25 The concrete surface must be brought into surface saturated dry 343.00 smt 320.00 Three Hundred Twenty

condition (SSD). Providing & Applying 2 coats of high performance Rupees

two component prepacked cementitious waterproofing, Dr. Fixit

Pidifin 2K, with a mix ratio of (liquid: Powder), parts by wt. - 1:2 at

the rate 0. 55 - 0.58 Sq.mt / Kg for 2 coats to achieve the DFT of

1mm in a span of 4 - 6 hours with a roller / brush on the prepared

concrete substrate. Over the splash zone / shower wall taking the

coating up the full height and up to 1 meter height on vertical

surface and on other walls and 0.3 metre on horizontal surface

below threshold for complete bathroom waterproofing. All the coats

to be applied in perpendicular direction to each other. Allow the

coating to air cure for 3-5 days before conducting water ponding

test for 24 Hrs. The coating shall have Elongation at break > 50%

as per ASTM D 412, Tensile strength > 1 N/mm2 as per ASTM D

412, Adhesion strength: 0.80 N/mm2 as per ASTM D 4541, crack

bridging upto 1mm as per ASTM C 836, Water penetration (5 bar

pressure) as per BS EN

26 Providing and fixing concealed or open center point to wall ceiling & 52.00 rmt 647.30 Six Hundred Forty

floor 50mm Dia CPVC (SDR 13.5) PIPE having National Sanitation Seven Rupees and

Foundation (NSF) seal for potable water of following dia. nominal

bore tube fittingswith Z patti (Minimum 1.6mm thick) with 6mm Dia U

Clamp with washer for Vertical water supply pipe. Pipe shall be

concealed or open as mention in tender description. Pipe shall be

used as per approved make list by GSPHCL

ITEM NO Description QUANTITY Unit RATE IN FIGURE RATE IN WORD Amount

27 Providing and fixing concealed or open center point to wall ceiling & 42.00 rmt 437.66 Four Hundred Thirty

floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation Seven Rupees and Sixty

(NSF) seal for potable water of following dia. nominal bore tube

fittings and clamps including making good the wall, ceiling and floor

etc. complete.rate including Z-patti. Pipe shall be concealed or

open as mention in tender description. Pipe shall be as per

approved make of GSPHCL make list. [A] 40 mm inner dia.

28 Providing and fixing concealed or open center point to wall ceiling & 70.00 rmt 247.25 Two Hundred Forty

floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation Seven Rupees and

(NSF) seal for potable water of following dia. nominal bore tube

fittings and clamps including making good the wall, ceiling and floor

Twenty Five Paise

etc. complete. Pipe shall be concealed or open as mention in

tender description. Pipe shall be as per approved make of GSPHCL

make list. [A] 25mm inner dia.

29 Providing and fixing to wall, ceiling and floor U.PVC SWR Rain 69.00 rmt 302.54 Three Hundred Two

Water Pipe with 'O' Ring 90 mm dia. of ISI 13592/92. Rate Rupees and Fifty Four

inclusive of All fittings like single or double 'Y' with door, reducer,

coupler single 'T' with door bend, G.I. Slotted Z patti of 16 Gauge Paise

(minimum1.60mm thick) and minimum 6mm dia. U Clamp with

Washer Nut at every 1.50mt. vertical distance including All Labour

Charges etc. complete and making good the Wall, Ceiling and

30 Providing & fixing to wall,ceiling and floor U.PVC SWR Soil Waste 69.00 rmt 471.36 Four Hundred Seventy

Pipe with 'O' Ring 110mm dia.of ISI 13592/92.Rate inclusive of All One Rupees and Thirty

fittings like single or double'Y'with door, reducer,coupler single'T'with

door bend,G.I.Slotted Z patti of 16 Gauge(minimum1.60mm th)and Six Paise

minimum 6mm dia.U Clamp with Washer Nut at every

1.50mt.vertical distance including All Labour Charges etc.complete

and making good the Wall,Ceiling and Floor.

31 Providing & fixing to wall,ceiling and floor U.PVC SWR Soil Waste 92.00 rmt 245.74 Two Hundred Forty

Pipe with 'O' Ring 75mm dia.of ISI 13592/92.Rate inclusive of All Five Rupees and

fittings like single or double'Y'with door, reducer,coupler single'T'with

door bend,G.I.Slotted Z patti of 16 Gauge(minimum1.60mm th)and Seventy Four Paise

minimum 6mm dia.U Clamp with Washer Nut at every

1.50mt.vertical distance including All Labour Charges etc.complete

and making good the Wall,Ceiling and Floor.

32 Providing and fixing S W R Nahni trap of the following nominal dia. 66.00 Nos 541.80 Five Hundred Forty

Self cleaning design with top jali and stainer including cost of cutting One Rupees and Eighty

and making good the walls and floors 100mm inlet and 50mm

outlet.Including 150 mm x 150 mm stainless steel jali with grating.

33 Providing & Fixing Wall Hung with PVC Flush Tank, Soft Seat Cover 30.00 Nos 5470.90 Five Thousand Four

& intergal "P" or "S" Trap including Jointing the Trap with Pan and Hundred Seventy

Soil pipe. Wall hung shall be fixed on S.S heavy duty rack bolt

having 16mm dia, 165mm length using Plastic sleeve Make by Rupees and Ninety

Using Drill Bitt Only. Rate are inclusive of all matreials, Labour & Paise

Necessary Fittings etc. Complete as per Detailed Drawings,

Specifications and as per the Instruction of Engineer In charge. The

Model & Make of Wall Hung & Flush Tank Shall be as per the

Approved Make List of GSPHCL.incl Chair Braket

34 Providing and fixing 600mm x 450mm beveled edge MIRROR of 18.00 Nos 825.48 Eight Hundred Twenty

superior glass mounted on 6mm thick A.C. sheet or plywood sheet Five Rupees and Forty

fixed to wooden plugs with C.P. brass screws & washers.

35 Providing & Fixing Urinal with P.V.C water pipe, 32mm dia. C.P. 12.00 Nos 2132.80 Two Thousand One

brassa waste coupling with Connection 32mm dia waste Pipe etc. Hundred Thirty Two

Complete. Rate are inclusive of all matreials, Labour & Necessary

Fittings etc. Complete as per Detailed Drawings, Specifications and Rupees and Eighty

as per the Instruction of Engineer In charge. The Model & Make of Paise

Urinal Shall be as per the Approved Make List of GSPHCL.

36 Providing & Fixing Two way Bib Tap with Wall Flange. Rate are 60.00 Nos 1309.39 One Thousand Three

inclusive of all matreials,Labour & Necessary Fittings etc. Complete Hundred Nine Rupees

as per Detailed Drawings,Specifications and as per the Instruction

of Engineer In charge.The Model & Make of Two way Bib Tap Shall and Thirty Nine Paise

be as per the Approved Make List of GSPHCL.

37 Provinding and fixing gun metal check or non return full way 2.00 Nos 2302.33 Two Thousand Three

WHEEL / HANDLE VALVE 50mm dia. Rate are inclusive of all Hundred Two Rupees

matreials, Labour & Necessary Fittings etc. Complete as per

Detailed Drawings, Specifications and as per the Instruction of

and Thirty Three Paise

Engineer In charge. All material used as per approved make list by

38 Provinding and fixing gun metal check or non return full way 2.00 Nos 656.86 Six Hundred Fifty Eight

WHEEL / HANDLE VALVE 40 mm dia. Rate are inclusive of all Rupees and Eighty Six

matreials, Labour & Necessary Fittings etc. Complete as per

Detailed Drawings, Specifications and as per the Instruction of

Engineer In charge. All material used as per approved make list by

39 Provinding and fixing gun metal check or non return full way 9.00 Nos 416.47 Four Hundred Sixteen

WHEEL / HANDLE VALVE 25 mm dia. Rate are inclusive of all Rupees and Forty

matreials, Labour & Necessary Fittings etc. Complete as per

Detailed Drawings, Specifications and as per the Instruction of

Engineer In charge. All material used as per approved make list by

40 Providing and fixing Ball cock set 50 mm make of Prayag Model No. 2.00 Nos 1940.51 One Thousand Nine

5612. Rate are inclusive with all labour, material & necessary fittings Hundred Forty Rupees

and Fifty One Paise

ITEM NO Description QUANTITY Unit RATE IN FIGURE RATE IN WORD Amount

41 Providing & Fixing Wash Basin with single hole for pillar tap with CI 18.00 Nos 1374.34 One Thousand Three

or M.S. bracketes painted white including holes and making good Hundred Seventy Four

the same but including fittings, (A) Vitereous china: (ii) Flat back

wash basin 550mm × 400mm size in white colour including

Rupees and Thirty Four

providing and fixing C.P brass waste coupling 32 mm dia,PVC water Paise

pipe, M.I fisher union 32 mm ia, and C.P brass pillar tap of 15 mm

dia.Complete including PVC connection pipe from stop cock to pillar

tap. ( As Approved in GSPHCL Make List.)

42 Providing & Fixing Health Faucets (ABS Body).Rate are inclusive of 30.00 Nos 565.51 Five Hundred Sixty Five

all matreials, Labour & Necessary Fittings etc. Complete as per Rupees and Fifty One

Detailed Drawings, Specifications and as per the Instruction of

Engineer In charge. The Model & Make of Health Faucets Shall be Paise

as per the Approved Make List of GSPHCL.

43 Providing,Supplying and Fixing S4 Channel System (S4 22.00 Each 421.58 Four Hundred Twenty

Channel+Profile Bracket+U Bolt Rubber mounted System)for One Rupees and Fifty

multiple Pipes for External Vertical Fixed line with wall Distance 3"

including nuts,bolts,fastners etc.Complete as per detailed Eight Paise

Specification and as directed by Engineer in Charge.

44 Providing & Fixing 15mm Heavy Duty Stop Cock with Exposed Part 30.00 NOS 665.51 Six Hundred Sixty Five

& Other Accessories (Sleeve, Lever, Wall Flange) . Rate are Rupees and Fifty One

inclusive of all matreials, Labour & Necessary Fittings etc. Complete

as per Detailed Drawings, Specifications and as per the Instruction

of Engineer In charge. The Model & Make of Concealed Heavy Stop

Cock Shall be as per the Approved Make List of GSPHCL.

45 Providing and fixing Brass Bottle trap make Surya Model No. L300 18.00 NOS 948.75 Nine Hundred Forty

with 12" pipe of surya make with necessary coupling of approved Eight Rupees and

quality for wash basin. Rate are inclusive with all labour, material &

necessary fittings etc.complete. Seventy Five Paise

46 Providing & Fixing Pillar Cock. Rate are inclusive of all matreials, 18.00 NOS 976.73 Nine Hundred Seventy

Labour & Necessary Fittings etc. Complete as per Detailed Six Rupees and Seventy

Drawings, Specifications and as per the Instruction of Engineer In

charge. The Model & Make of Pillar Cock Shall be as per the Three Paise

Approved Make List of GSPHCL.

47 Providing and fixing Alluminium section window having extruded 140.00 Smt 787.70 Seven Hundred Eighty

Aluminum Colour aNodized section frame main outer size 63.50mm Seven Rupees and

x 38.10mm x 1.2mm @ wt.of 0.643 Kg/mt), with sliding shutters of

horizontal member size 40mm x 18mm x 1.29mm (of Jindal Section Seventy Paise

No:8947@ wt.of 0.456 Kg/mt), vertical member of size 40mm x

18mm x 1.29 mm (of Jindal Section No:8949 @ wt.of 0.456Kg/mt)

with powder coated aluminum fittings and fixtures and silicon

sealant fixing to frame as per details including one mosquitoe jali

shutter With Both Side Locking Arrangment for ALL FLOORS.

48 Providing and laying integrated cement based proprietary water 654.00 Smt 595.22 Five Hundred Ninety

proofing treatment of required thickness over the roof including Five Rupees and

providing and applying two coat of Acrylic polymer of approved

brand & manufactures and china mosaic fitting and finally finishing Twenty Two Paise

the surface with white cement slurry and sloping out terrace slabs

with following specification laid to required slope not flotter than 1 :

80(incl treating the vertical surface of the parapet wall upto 20cms

height above finished level of terracing including

finishing,curing,testing etc. comp.Rate is incl.five years performance

to be given on stamp paper.(No extra shall be paid for increase in

thickness for proper slope)

(a) Applying a two coat of Acrylic based polymer of approved brand

& manufactures and as per recommandation of manufactures over

the RCC slab incl.clearing the surface before treatment.

(b) Finishing the surface with china mosaic pieces laid on 10mm

thick joint less cement mortar of mix 1:3(1 cement : 3 coarse

sand)admixed with proprietary water proofing compound

conforming to IS :2645 and finally finishing the surface with trowel

with neat cement slurry.

( c) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing for final test.All above

operations to be done in order and as directed and specified by the

engineer in charge.

49 Providing, Fabrication and fixing M.S. Grill / GATE of approved 1841.00 KG. 74.94 Seventy Four Rupees

pattern fabricated from M.S. flat, Square Bars, round bars, C and Ninety Four Paise

channel, square/round box pipe as per detail drawings. Rate is

inclusive of welding with grinding and applying of mild steel putty

with hardener into groove to have smooth surface, two coats of oil

paint and one coat of yellow zinc chromate primer coat of approved

brand only. Oil paint shall be luxol Enamel paint of Berger Paint

India Limited or Asian paint Apcolite premium gloss Enamel of

Asian Paint or Dulux premium gloss Enamel of Dulux Paint and

Nerolac Sythetics Enamel of Nerolac paint for all floor and at any

height only. (M.S. Grill / GATE material should be ISI mark Only)

TOTAL DTP AMOUNT

Signature of Contractor DY.Executive Engineer Executive Engineer