Renovation work for smart look of building external area at Salboni Super Speciality Hospital, Dist Paschim Medinipur Electrical Installation work

Amount

Supply, installation, testing & commissioning of fabricated Chanellium Letter (Sign Board) fo hight 2ft of following specification: (SALBONI SUPER SPECIALITY HOSPITAL= 30X24= 720 Inch)

a) Each side of the letter would be made of 50mm breadth, 1.2mm thick Alluminium Sheet with the help of suitable cutting & bending machine.

b) Back side of the letter would be made from 2mm thick Alluminium Sheet by cutting according to appropriate letter block with the help of suitable cutting & bending machine.

c) Front side of the letter would be made of 4mm thick Mitshubishi or equivalent make imported Acrylic Sheet by cutting according to appropriate letter block with the help of suitable cutting & bending machine. The Color of the letter will be approved by the appropriate authorirty of the Hospital/Medical College.

d) For glowing each letter, Samsung or equivalent make (0.97 - 1.02)W LED module would be used. (Make will be approved by the EIC)

e) To provide power for LED module, suitable SMPS unit of IP-67 would be used in respect of load of each letter. And the power supply unit would be fixed in suitable MS or equivalent box of IP-65 on parapet wal or iron structure with appopriate clamp. (Make will be approved by the EIC)

f) All side of the letters (only side & back wall) would be painted with synthetic enamelled/PU paint. (Color & Make will be approved by the EIC)

g) The inter-connection of SMPS unit & LED mobule circuit of each letter would be made with FR PVC insulated sheathed copper wire. And the letter complete in all respect would be fixed on pre-errected MS structure by suitable SS nut-bolt & washer - as per direction of EIC.

(The above rate is considered including loading, unloading & transportation & all other charges)

Febrication & errection of suitable Iron Structure would be made with 75*40*5 mm 'C' Iron Channel as vertical support on floor/roof, 50*50*5 mm Iron Angle for continuous horizontal frame supprot for top & bottom of each letter & cross angle support to structure, 50*5mm Iron Flat for continuous horizontal frame supprot for middle of each letter. A Sole plate of size 300x300x5mm would be welded at the bottom of each vertical support and suitable sole plate in case of cross support. The complete structure would be painted with two coats Red-Oxide Primmer & two coats Synthetic Enamelled paint. The structure would be errected on roof supported to parapet wall. (The work would be executed as per direction of EIC).

Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation. [using concrete mixture ratio: 1:1.5:3, Pakur Variety] (PWD Building SOR Page: 25 Item: 6)

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary. (With 1:6 cement mortar, 20 mm thick plaster) [including cost of chipping over concrete surface] (PWD Building SOR Page: 192 Item: 15)

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. (PWD Building SOR Page: 192 Item: 15)

Dismantling of Existing Signage Board from roof top of SSH Building.

Supply & Delivery of following size 1.1 kv.gr.XLPE insulated 1100V Grade as per IS 7098 (part 1) 1988 armoured sheathed Aluminium conductor cable. [Make - Polycab /Gloster/KEI/BONTON/MESCAB-Brand approved by EIC]

4 core 10 sq. mm. [Cable for flood light & Street Light]

Supply & Delivery of following size 1.1 KV grade PVC Insulated and PVC Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Flexible Cables for Voltage Grade 1100 Volts conforming to IS:694:2010 [Make - Polycab /Gloster/KEI/BONTON/MESCAB-Brand approved by EIC] [For flood light and Street light]

2 core 2.5 sq. mm.

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish.PWD-SCHEDULE-F-3

From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc.PWD-SCHEDULE--5/i

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : (Brand approved by EIC),PWD-SCHEDULE-F-4/7-c

4 core 10 sq. mm.

Finishing the end of following PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :PWD-SCHEDULE-F-5-8/b

For 4 core upto 10 sqmm.

Supplying and fixing compression type gland complete with PVC gland entry of PVC unarmoured Copper cables as below : (Brand approved by EIC)

For 2 core upto 2.5 sqmm.

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 2.5sqmm.PWD-SCHEDULE-F-5/9-i

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.[For new earthing and exsisting Earthing].PWD-SCHEDULE-G-2/3-a

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.(Solid GI wire).PWD-SCHEDULE-G-2/5-a-ii

No. 6 SWG [For street Light]

Supply and delivery of New generation energy saving and environmental friendly long life 100W-230VAC/50HZ LED street light made up of pressure die cast aluminium housing with high power LED as lighting source with toughened glass top cover. TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device.Make- HAVELL(SENDURAPEARLPLUSSL100WLED757PASYTOPCLC) /Similar Crompton/Similar Philips-Brand approved by EIC

Fixing only Street light on exsisting pole incl.Supply & fixing of 4way Stud type Connector on existing Din rail and Making all necessary connection.

Supply and delivery of Energy saving, environmental friendly, long life 70W-230VAC/50, exclusive innovative die-cast aluminium IP66 flood light,suitable for highlighting architectural facade and general purpose lighting..Make- HAVELLS(FLAREULTIMACA80WLED757PWBLTG ) /Similar Crompton/Similar Philips-Brand approved by EIC.

Supply & delivery wall mounted 1.5(A) x1(H) meter long single arm bracket suitable for fixing the flood light in Parapet wall of building. (Make: Bajaj/Valmount.//Utkarsh/Surya-Brand approved by EIC)

Fixing only Floodlight fittings on top of masonary structure by 3 Nos. 10 mm dia x 87 mm long rag bolts, nuts & double washers complete either 37 mm x 10 mm MS flat support/or by other means as required.PWD-SCHEDULE-C-3/20-b

Supplying & Fixing of 155mm x 155mm x 100mm SMC/FRP loop box with 20A 4 Way DMC Stud Cap Terminal Blocks, Brass, Panel Mounting by screw having 1 nos.6A 10KA 230V 50HZ SP MCB Fixed on Suitable size of Rail Channel etc. as required. Make-SINTEX(Loop Box-GSJB-1616)

LED based Edge light (Name Plate) as per approved design & specification.

Approved Matter 1. SUPERINTENDENT, 2. ASST. SUPERINTENDENT, 3. WBMSCL OFFICE (in English letter Format)

Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [PWD/GS Page: E-18 Item: 9a]

Distribution wiring in 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) [PWD/GS Page: E-14 Item: 1a i.] For all signage wiring.

S&F medium gauge 32mm dia GI Pipe (ISI-Medium) Protection with necessary fittings and jointing metarials as required as per GS. [PWD/GS Page: F-6 Item: 11]

NIMAI CHANDRA BEJ

DB Enterprise

Prava Enterprise

RASH ELECTRICAL WORKS