REPAIRS TO TOILET KITCHEN BATH IN CERTAIN MD ACCN IN NARAYAN ENCLAVE AT SOUTH OF RLY LINE UNDER GE MISSAMARI

S&F Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in adhesive compound as per manufacturers instruction and pointed in white or colour cement to match the surface complete all as specified and directed.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in adhesive compound as per manufacturer instructions and pointed in white or coloured including 15 mm thick Screed bed or bedding layer of cement mortar 1:6, for laying floor finishes, complete all as specified and directed.

M&L Heavy duty coloured vitrified tiles 8-10mm thick as in Tread and Riser of Steps set and jointed in neat cement slurry & pointed in white or colour cement to match set and jointed in neat cement slurry and pointed in white or coloured including 15mm thick Screed bed or bedding layer of cement mortar 1:4, for laying floor finishes, including dismantling existing unservicaeable floor tiling with cement mortar bedding and removing rubbish/debris off the premises complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L Granite (of any type) tiles 18-20mm thick machine cut, floor laid bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including including 20 mm thick Screed bed or bedding layer of cement mortar 1:6, complete all as specified and directed.

Demolition of RCC of any description complete all as specified and directed.

M & L providing 25mm thick average thickness RCC type B0, 1:2:4 (12.5mm graded aggregate) as levelling course for APP membrane complete all as specified & directed.

Use and waste Formwork to soffits of suspended slabs such as roof slabs, shelves, floor slabs, landing and similar work not exceeding 200mm thick complete all as specified and directed.

M&L TMT bar 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with inlet ball valve float and handle, PVC flush pipe, complete all as specified and as directed.