Special Repair to field unit building DOO including rewiring inside OFD

Amount

Material & Labour for Point wiring with copper cond. cables FRLS in PVC conduit one light point or fan point controlled by one switch with PVC sheathed cables 2.5sq.mm size with cutting chases for conduit. Make-Havells / KEI / Universal / Finolex for wire and Anchor / Polycab / Kalinga for pipe.

Material & Labour for Point wiring with copper cond. cables FRLS in PVC conduit one telephone point with PVC sheathed cables 1.0sq.mm size with cutting chases for conduit. Make-Havells / KEI / Universal / Finolex for wire and Anchor / Polycab / Kalinga for pipe.

Material & Labour for Point wiring with stranded copper cond. cables in PVC conduit one light point controlled by two 2-way switches with PVC sheathed cables 2.5sq.mm size with cutting chases for conduit. Make-Havells / KEI / Universal / Finolex for wire and Anchor / Polycab / Kalinga for pipe.

Material & Labour for Point wiring with stranded copper cond. cables in PVC conduit one 3pin socket outlet, 5amps, independent with PVC sheathed cables 2.5sq.mm sized with cutting chases for conduit.Make-Havells/ KEI/ Universal/ Gemscab/ Finolex for wire and Kinjal/ Plaza/ Kalinga for pipe.

Material & Labour for Point wiring with stranded copper cond. cables in PVC conduit one 3pin socket outlet 15amps, independent with PVC sheathed cables 4sq.mm sized with cutting chases for conduit. Make-Havells/ KEI/ Universal/ Gemscab/ Finolex for wire and Kinjal/ Polycab / Kalinga for pipe.

Material & Labour for Ceiling rose PVC/polycarbonate, isolated body three terminals. Make- Anchor/ legrand/ Havells/ Cona Only.

Material and labour of Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings. Make- Anchor/legrand/Havells/Cona Only.

Supply & Fixing for Modular telephone Socket, 2/3 pin, 1or2 module with white cover plate and metal flush box single module.

Supply & Fixing for Modular switch 1 way 6A, 1 module. Make- Anchor/legrand/Havells/Cona Only.

Supply & Fixing for Modular switch 1 way 16A, 1 module. Make- Anchor/legrand/Havells/Cona Only.

Supply & Fixing for Modular Socket, 6A - 2/3 pin combined 2 module,. Make- Anchor/legrand/Havells/Cona Only.

Supply & Fixing for Modular Socket 6A/16A - 2/3 pin combined 2 module, type. Make- Anchor/legrand/Havells/Cona Only.

Supply & Fixing for Modular White cover plate with frame, 12 module

Supply & Fixing for Modular White cover plate with frame, 10 module

Supply & Fixing for Modular White cover plate with frame, 3 module

Supply & Fixing for Modular Metal flush box 12 module

Supply & Fixing for Modular Metal flush box 10 module

Supply & Fixing for Modular Metal flush box 3 module

Supplied and fixing of Rigid non-metallic PVC conduit with cutting chases for conduit, external dia in 32 mm exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. Make-Anchor / Plaza / Kalinga.

Supplied and fixing of Wiring for circuit/submain wiring alongwith earth wire with the sizes (2x6.0 sq. mm + 1x4.0 sq. mm earth wire) of FRLS PVC insulated copper conductor, single core cable in surface/ recessed as required in PVC conduit with cutting chases, Make-Havells / KEI / Universal / Finolex.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. Make- legrend/ C&S/ Siemens/ GE/Schneider Only.

Supply and fixing of DP isolator, 40 amps, 240Volts. Make- legrend/ C&S/ Siemens/ GE/Schneider Only.

Supply and fixing of sheet metal enclosures for DB's when MCB's to be used single pole and neutral 12way, single door 240Volts with 200A rated busbar. Make- legrend/ C&S/ Siemens/ GE/Schneider Only.

Supply and fixing of sheet metal enclosures for DB's when MCB's to be used single pole and neutral 2way, single door 240Volts with out bus bar. Make- legrend/ C&S/ Siemens/ GE/Schneider Only.

S & F stepped type electronic Modular Fan regulator, 120W - 2 module. Make- Usha/ Cromption/ GE only.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). Make- Usha/ Cromption/Polar/Havells/GE only.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. Make- Havells/Phillips/GE/C&S/Schneider only

M&L for Earthing complete with Chemical earthing with copper earth plate 90x60cmx5mm & copper earth strip 50x6mm, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all as shown in Plate No. 2 to the earthing test point all as specified and indicated including testing on completion

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm. Make- Usha/ Cromption/Polar/Havells/GE only.

Supply and fixing of sheet metal enclosures for DB's when MCB's to be used triple pole and neutral 4way, double door 415Volts with rated bus bar with One(01) Incomer MCCB 160Amps 3pole, 36kA, adjustable settings and 3ph. energy meter. Make- legrend/ C&S/ Siemens/ GE/Schneider Only.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Contractor credit for old dismentalled items under sl.no.31 of taking down point wise.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings

Dismantling timber scantlings 40 sq. cm and over in section, in any position ( unframed wok)

Taking down steel /wooden doors/wndows chaukhat or frame with shutters (without taking off shutters from the frames) n exc. 1.5 sqm

Taking down wooden Shutters of any description exc 1 sq. m but n exc. 2 sqm each

Dismantling False ceiling E board non asbestos laid & fixed in ceiling grid.

Fixing & tightning, levelling of Anodised aluminium or other snap grid frame work for false ceiling for non asbestos board ceilings all as specified

Refixing of 4 mm thick except Non asbestos fibre cement building ( E board) boards fixed or laid/ inserted to timber/GI/Aluminium framework

S&F 4 mm thick Non asbestos fibre cement building ( E board) boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws

Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Pre-painted galvalume aluminum zinc coating GI based plain/ corrugated steel sheet ridges 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws as specified

Demolition cement concrete surfaces in ground floors and pavings n exc 15 cm thickness (below or above ground level).

M & L 75 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate)

Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes

Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors / skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors & skirting.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories, 5 mm thick plain sheet glass Modi/Saint Gobain complete with prviding & fixing of all fitting accesaries reqd. including all items mentioned in item.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).

S&F Sheet glass,4.8 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane for ventilator.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

Cement concrete in foundations, filling and mass concrete, type D2 1:4:8 (40 mm graded aggregate)

Brickwork with subclass 'B' bricks, straight or curved on plan exc. 6 mtrs. Mean radius built in Cement Mortar 1:6 old size

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces with smooth finish without using extra cement.

Steel work in tubular trusses, purlins of hollow or other sections including special shaped washer etc. complete using ERW hollow sections ( round or other sections)or induction butt welded tubes conforming to I. S.( including cleat of ms angle or other section fixing arrangement over existing wooden purlins/truss )

Framed work such as grills, gratings, etc. ( including fixing with provision of fastner) with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work.

Spreading and levelling of demolished material in layers n exc. 25 cm thick and well ramming including watering as required

S & F 100 mm Butt hinges, medium , cold rolled mild steel, and fixed

S&F 150 mm Aluminium handles, cast type, anodised.

S&F Aluminium locking bolts, anodised, with bolt not less than 10mm dia, 250 mm size

S& F 250 mm Aluminium alloy, anodised, sliding door bolt ( for locking ) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S& F 150 mm longAluminium anodised, barrel tower bolts of extruded section and fixed.

S& F Door closer aluminium body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F 140 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

Preparing old surfaces plastered or unplastered and applying two coat of oil emulsion on walls & false ceiling boards make: Asian ( Tractor emulsion) / Nerolac/ ICI Dulux.

Preparing old surfaces plastered or unplastered and finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work/old (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Make:- Water proof paint Apex (Ultima) Asian/ Dulux weathermax/ Nerolac

Preparation of new surface / old treated surface and applying two coat synthetic enamel paint (ordinary tint) over one coat of red oxide over steel surfaces.

Preparation of new surface / old treated surface and applying two coat synthetic enamel paint (ordinary tint) over one coat of zinc chromate primer over wooden surfaces.

Removing building materials etc. to a distance up to 500 metres or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination.

Credit (-) old/unserviceable dismentled wooden windows/ doors with or without frames/grills / welded mesh jali etc.

Credit (-) old/unserviceable dismentled steel window frames/grills / welded mesh jali etc.

Credit (-) old/unserviceable dismentled asbestos sheets

M/S P K ASSOCIATES

COX INFRATECH PRIVATE LIMITED