Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹22.8 L
Closing Date
15 Apr 2024, 10:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Industrial Areas Development Board
Technical Assistant
Construction of additional 4th, 5th & Terrace Floors with completion of balance works for G PLUS 3 Floors for KIADB Multistoried Office Building, Gandhinagar, Bengaluru.
KIADB/2023-24/BD/WORK_INDENT122
KIADB/2023-24/BD/WORK_INDENT122
Open
Buildings
Two Tender Document System(Two Cover)
KIADB Head Office Bangalore
2 documents required · 2 mandatory
To qualify for award of this contract, each Tenderer whether his name should have in the last five years period 2018-19 to 2022-23. The Tenderer should have satisfactory completed as a prime contractor for at least one similar nature of construction of buildings with interior decoration, flooring with tiles, water supply, sanitary & electrical works etc., as per the detailed scope of work mentioned in the relevant clauses of value not less than Rs.1140.00 lakhs
Executed in any one financial year, the following minimum quantities of work (80% quantity of work put to tender): Certificates of proof shall be issued from competent authority not below the rank of Executive Engineer in Government/Public Sectors/ Government Undertaking Organizations only will be considered for bid evaluation. (Quantities executed and work done certificates/work quantity certificates issued under Joint Venture/consortium/ private firms/private organizations/private individuals /partial turnkey shall not be considered for bid evaluation) (1) PCC/RCC: 628 cum, (2) Steel: 157 tonne, (3) Plastering: 5818 cum, (4) Cement Block Masonry: 644 sqm, (5) Floor tiles: 2979 sqm, (6) PVC pipes: 2667 sqm
Each Tenderer should further demonstrate: Availability by owning at least 50% of the required / specified critical equipment for this work and remaining 50% can be deployed on lease / hire basis the following key and critical equipment for this work in good working condition
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity: (A x N x 1.5 - B), Where, A: Maximum value of Civil Engineering works executed in any one year during the last five years (updated to 2023-24 price level) taking into account the completed as well as works in progress, N: Number of years prescribed for completion of the works for which tenders are invited. B:Value, at 2023-24 price level, of existing commitments and on-going works to be completed during the next 08 months
To qualify for award of this contract, each Tenderer whether his name should have in the last five years period 2018-19 to 2022-23. Achieved in at least two financial years a minimum financial turnover of Rs.4560.00 Lakhs. (Civil Contract works)
Each Tenderer should further demonstrate: liquid assets and /or availability of credit facilities of not less than Rs.684.00 lakhs (Credit lines/ letter of credit/ certificates from banks for permitting the fund requirement etc-equivalent of the estimated cash flow for the months in the peak construction period)
₹7,500
₹22.8 L
15 Mar 2024
15 Mar 2024
17 Apr 2024
22 Mar 2024
26 Mar 2024
Construction of additional 4th, 5th & Terrace Floors with completion of balance works for G PLUS 3 Floors for KIADB Multistoried Office Building, Gandhinagar, Bengaluru.
Civil: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joint...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Column Centering for 4th Floor complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge
Column Centering for 5th floor complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge
Column Centering for terrace complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge
Roof Beam Centering for 4th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge
Roof Beam Centering for 5th floor complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge
Roof Slab Centering, for 4th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge
Roof Slab Centering for 5th flo0r. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge
Staircase Centering for 4th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge
Staircase Centering for 5th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge
Staircase Centering for terrace.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggre...
Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggre...
Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggre...
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level with RCC...
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level with RCC...
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level with RCC...
Providing and laying Autoclaved Aerated Cement blocks masonry with 100 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level in cement ...
Providing and laying Autoclaved Aerated Cement blocks masonry with 100 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level in cement ...
Providing and laying Autoclaved Aerated Cement blocks masonry with 100 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level in cement ...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to masonry including rounding off corners wherever required smooth rendering, providi...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to masonry including rounding off corners wherever required smooth rendering, providi...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to masonry including rounding off corners wherever required smooth rendering, providi...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removin...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removin...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removin...
Doors for 4th ,5th and Terrace Floors.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge
Flush doors for 4th ,5th and Terrace Floors.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge
Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (1 Liquid: 2 Powder), to the RCC surface like bathroom, toi...
Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (1 Liquid: 2 Powder), to the RCC surface like bathroom, toi...
Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (1 Liquid: 2 Powder), to the RCC surface like bathroom, toi...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours ...
Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours ...
Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours ...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), c...
Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), c...
Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), c...
Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), c...
Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), c...
Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), c...
Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), c...
Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...
Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with c...
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all
complete as per the architectural drawings with...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior p...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior p...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior p...
Supplying and fixing in position Staircase Railing at all levels made out of SS tubular box sections and 8mm Thick SS Wires, as per detailed design & drawing, including all necessary bracket, fixtures...
Providing 15 mm cement plaster on rough side wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever required smooth rendering,...
Providing 15 mm cement plaster on rough side wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever required smooth rendering,...
Providing 15 mm cement plaster on rough side wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever required smooth rendering,...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an eve...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an eve...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an eve...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...
WATER SUPPLY: Supply , Installing, testing and commissioning approved makewhite colour European water closet(suite) constellation series wall mounted pattern type P or S trap with 6/3 Lts.Capacity por...
Supply , Installation, testing and commissioning of approved make 15mm CP health faucet with one no. of CP angle cock, CP flexible tube 1.0m long, CP crutch, nozzle etc., complete.complete with all l...
Supply , Installation, testing and commissioning of CP toilet paper holder fixed with counter sunk SS screws complete..complete with all lead and lift etc, as per specification and as per directed by ...
Supply , Installation, testing and commissioning of approved make 15mm CP hose bib with necessary CP wall flanges etc., complete with all lead and lift etc, as per specification and as per directed b...
Supply , Installing, testing and commissioning approved make Wash basin white colour fixed under counter with 15mm C.P. pillar cock unit 32mm dia CP waste coupling,32 mm dia heavy duty CP bottle...
Supply , Installing, testing and commissioning approved make oval Handwash white colour fixed under counter with 15mm C.P. pillar cock unit 32mm dia CP waste coupling,32 mm dia heavy duty CP bot...
Supply , Fixing approved make CP towel ring fixed on to wall by using with SS screws etc complete.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Cha...
Supply , Installation of Soap Dispenser with necessary fixing material paper roll All necessary item required to complete install the Fixture etc. Complete .complete with all lead and lift etc, as pe...
Supply , Installation, Testing & Commissioning of C.P.Gratings for floor trap with all necessary items .complete with all lead and lift etc, as per specification and as per directed by the Engine...
Supply , Installation , testing and commissioning of stainless steel sink with oval Single bowl 42 x 20 x 9 of approved size manufactured from 1mm thick stainless steel, 18/8 grade SS-304 indestructib...
Supply , Installation, of Urinal HPL Partition moulding to outer edge size 0.45m x 1.2m inserted 12 mm inside wall .complete with all lead and lift etc, as per specification and as per directed by th...
Supply , Installation of white vitreous China battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), hav...
Supply , Installation , testing and commissioning of approved make hand drier of approved colour having twin blower integrated with timer cum infrared sensing system fully automatic which can work on ...
Supply , Installation , testing and commissioning of 75mm X 75mm floor grating of CP ring and grate with necessary fixing materials and cement concrete all-round the trap for collection of Waste water...
Supply Installation of Gyeser of 5 L capacity , complete .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge
INTERNAL SOIL AND WASTE PIPE SYSTEM: Supplying, laying, jointing, testing and commissioning approved make PVC pipes class III 6 Kg/cm2 with solvent cement joints confirming to IS 4985 for Washing Mac...
Supplying, laying, jointing, testing and commissioning approved make PVC pipes class III 6 Kg/cm2 with solvent cement joints confirming to IS 4985 for Washing Machine & wash basin outlets. The quoted...
Supplying, laying, jointing, testing and commissioning approved make PVC pipes SWR grade confirming to IS 13592 Class B with solvent joints confirming to IS 5382 for solvent jointing for Suspended pip...
Supplying, laying, jointing, testing and commissioning approved make PVC pipes SWR grade confirming to IS 13592 Class B with solvent joints confirming to IS 5382 for solvent jointing for Suspended pip...
Supplying, installing, testing and commissioning of approved make PVC Pipes 10kg (Solvent joint). The fittings and specials such as tees, elbows, couplers, bends, enlargers etc.,where connection with ...
Supplying, laying, jointing, testing and comissioning of approved make PVC multifloor trap with required concrete encasing all around, complete.110 x 75 mm dia (50 mm water seal) .complete with all le...
Supplying, laying, jointing, testing and comissioning of approved make PVC floor drain with C P grating with required concrete encasing all around, complete. 110 x 75 mm dia (20 mm water seal) Balc...
Supplying & fixing of PVC self cleansing type nahani trap with outlet confirming to IS 14735 with necessary cement concrete , with or without vent arm, etc., complete as per specifications including c...
Drilling with core cutting machine in RCC beams, slabs, floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised repres...
Drilling with core cutting machine in RCC beams, slabs, floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised repres...
Drilling with core cutting machine in RCC beams, slabs, floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised repres...
Supplying, Installaing, Testing & Commissioning of approved make Balcony rainwater outlet with 75 mm dia PVC bend & SS grating on top including fixing in cement mortar 1:4 and Bore Packing etc., comp...
VERTICAL SOIL AND WASTE PIPE SYSTEM: Supplying, laying, jointing, testing and commissioning approved make PVC pipes SWR grade confirming to IS 13592 Class B with rubber ring joints confirming to IS 53...
Supplying, laying, jointing, testing and commissioning approved make PVC pipes SWR grade confirming to IS 13592 Class B with rubber ring joints confirming to IS 5382 for exposed piping in shaft .The q...
Supplying, laying, jointing, testing and commissioning approved make PVC pipes SWR grade confirming to IS 13592 Class B with rubber ring joints confirming to IS 5382 for exposed piping in shaft .The q...
Supplying, laying, jointing, testing and commissioning approved make PVC pipes SWR grade confirming to IS 13592 Class B with rubber ring joints confirming to IS 5382 for exposed piping in shaft .The q...
Supplying, laying, jointing, testing and commissioning approved make PVC pipes SWR grade confirming to IS 13592 Class B with rubber ring joints confirming to IS 5382 for exposed piping in shaft .The q...
Supplying, laying, jointing, testing and commissioning approved make PVC vent cowl.63 mm dia.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge
Supplying, laying, jointing, testing and commissioning approved make PVC vent cowl.75 mm dia.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge
Supplying, laying, jointing, testing and commissioning approved make PVC vent cowl.110 mm dia.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge
Supplying, laying, jointing, testing and commissioning approved make PVC vent cowl.160 mm dia.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge
INTERNAL WATER SUPPLY SYSTEM: Supply, installating, fixing, jointing, testing and commissioning of approved make Polyethylene/Aluminium/Polyethylene (PE-AL-PE) co-extruded composite piping system of s...
Supply, installating, fixing, jointing, testing and commissioning of approved make Polyethylene/Aluminium/Polyethylene (PE-AL-PE) co-extruded composite piping system of small diameter for the conveya...
Supply, installating, fixing, jointing, testing and commissioning of approved make Polyethylene/Aluminium/Polyethylene (PE-AL-PE) co-extruded composite piping system of small diameter for the conveya...
Supply, installating, fixing, jointing, testing and commissioning of approved make Polyethylene/Aluminium/Polyethylene (PE-AL-PE) co-extruded composite piping system of small diameter for the conveya...
Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not ...
Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not ...
VERTICAL SHAFT & TERRACE - WATER SUPPLY SYSTEM: Supplying, installing, testing and commissioning of approved make uPVC Pipes as per ASTM D 1785 Schedule 40 with schedule 80 specials (solvent joint) ...
Supplying, installing, testing and commissioning of approved make uPVC Pipes as per ASTM D 1785 Schedule 40 with schedule 80 specials (solvent joint) confirming to IS:554 .The fittings and specials s...
Supplying, installing, testing and commissioning of approved make uPVC Pipes as per ASTM D 1785 Schedule 40 with schedule 80 specials (solvent joint) confirming to IS:554 .The fittings and specials s...
Supplying, installing, testing and commissioning of approved make uPVC Pipes as per ASTM D 1785 Schedule 40 with schedule 80 specials (solvent joint) confirming to IS:554 .The fittings and specials s...
Supplying, installing, testing and commissioning of approved make uPVC Pipes as per ASTM D 1785 Schedule 40 with schedule 80 specials (solvent joint) confirming to IS:554 .The fittings and specials s...
Supplying, installing and testing approved make Brass ball valves PN 10 conforming to IS 1703 with unions etc., complete. 25 mm dia (Screwed ends) .complete with all lead and lift etc, as per specifi...
Supplying, installing and testing approved make Brass ball valves PN 10 conforming to IS 1703 with unions etc., complete. 32 mm dia (Screwed ends) .complete with all lead and lift etc, as per speci...
Supplying, installing, testing and commissioning of CI butterfly valves PN 10 with standard lever confirming to IS standard 13039 with necessary flanges, nuts and bolts etc., complete. 50 mm dia - PRM...
Supplying, installing, testing and commissioning of CI butterfly valves PN 10 with standard lever confirming to IS standard 13039 with necessary flanges, nuts and bolts etc., complete. 65 mm dia -Ter...
Supplying, installing, testing and commissioning of CI butterfly valves PN 10 with standard lever confirming to IS standard 13039 with necessary flanges, nuts and bolts etc., complete. 80 mm dia -Te...
Providing, fixing, testing and commissioning of Brass body nickel plated automatic air release valves with necessary GI Specials, thread, holdtite, brass spindle, NBR and elastomeric, stainless steel ...
Supplying, installing, testing and commissioning of approved make CI body NRV (PN 10) with necessary flanges , & other accessories etc., complete. 65 mm dia - Terrcae Pump Delivery. complete with all...
Providing & fixing suction CI body Y strainer (PN 10) with MS flange of suitable length fabricated from 16 gauge SS sheet with 3 mm slots with necessary nuts and bolts, neoprene rubber gaskets, flange...
Supplying and laying of P.C.C support blocks of 1 : 2 : 4 concrete mix of sizes as given below for pipe supports at terrace level to run the terrace water supply pipes with necessary shuttering, plast...
Supplying, installing ,testing and commissioning of Pressure gauges of suitable range for pump sets and pipe lines with Ball valves, siphon, Fittings like unions / colours / reducers etc. Glycerine f...
RAIN WATER & BALCONCY: Supply, fixing and testing of PVC rain water down take pipes Type A (SWR) confirming to IS 13592 : 1992, with solvent joint inclusive of all necessary specials like clean outs, ...
Supply, fixing and testing of PVC rain water down take pipes Type A (SWR) confirming to IS 13592 : 1992, with solvent joint inclusive of all necessary specials like clean outs, bends, tees, offsets, d...
Supplying, fixing, testing and commissioning of leaf trap with kurra made out of PVC/FRP with aluminium grating for rainwater outlets on terrace including all necessary grouting 110 mm dia complete w...
PUMP ROOM: Supplying, laying, jointing, testing &commissioning approved make class B G.I. pipes and fittings confirming to IS 1239 PI & II, malleable fittings viz., tees, elbows, flanges, unions etc.,...
Supplying, laying, jointing, testing &commissioning approved make class B G.I. pipes and fittings confirming to IS 1239 PI & II, malleable fittings viz., tees, elbows, flanges, unions etc.,including c...
Supplying, installing, testing and commissioning of approved make butterfly valve (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 16 Kg/...
Supplying, installing, testing and commissioning of approved make butterfly valve (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 16 Kg/...
Supplying, installing, testing and commissioning of approved make butterfly valve (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 16 Kg/...
Providing & fixing of heavy quality Non Return valve of gun metal / brass body with screwed 15kg class as per details mentioned in approved materials list etc. complete (For solar water inlet pipe) 80...
Supplying, installing, testing and commissioning approved make Y strainer with necessary nuts & bolts etc.,complete. 100mm dia complete with all lead and lift etc, as per specification and as per dir...
Supply, fabrication, fixing, testing and commissioning of GI Class C puddle flanged pipes of required sizes for inlet, outlet, vent and overflow pipes for Over Head, UG Sump Tank, STP . The puddle fla...
Supply, fabrication, fixing, testing and commissioning of GI Class C puddle flanged pipes of required sizes for inlet, outlet, vent and overflow pipes for Over Head, UG Sump Tank, STP . The puddle fla...
Supply, fabrication, fixing, testing and commissioning of GI Class C puddle flanged pipes of required sizes for inlet, outlet, vent and overflow pipes for Over Head, UG Sump Tank, STP . The puddle fla...
Supply, fabrication, fixing, testing and commissioning of GI Class C puddle flanged pipes of required sizes for inlet, outlet, vent and overflow pipes for Over Head, UG Sump Tank, STP . The puddle fla...
Supply, fabrication, fixing, testing and commissioning of GI Class C puddle flanged pipes of required sizes for inlet, outlet, vent and overflow pipes for Over Head, UG Sump Tank, STP . The puddle fla...
Supply, fabrication, fixing, testing and commissioning of GI Class C puddle flanged pipes of required sizes for inlet, outlet, vent and overflow pipes for Over Head, UG Sump Tank, STP . The puddle fla...
Supply, fabrication, fixing, testing and commissioning of GI Class C puddle flanged pipes of required sizes for inlet, outlet, vent and overflow pipes for Over Head, UG Sump Tank, STP . The puddle fla...
Supply, fabrication, fixing, testing and commissioning of GI Class C puddle flanged pipes of required sizes for inlet, outlet, vent and overflow pipes for Over Head, UG Sump Tank, STP . The puddle fla...
Swan neck bend for Vent pipe with mosquito proof mesh (100mm dia) complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge
Swan neck bend for Vent pipe with mosquito proof mesh (80mm dia) complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge
Supplying, installing, testing and commissioning of inlet, outlet, vent and overflow pipes, fittings with CI frame and cover for following sizes to overhead water tank, UG Tank, Storm water, waste wat...
Supply, installation, testing & commissioning of Microprocessor based fully automatic Electronic water level controller with indicator and the following parameters facility: 1) Auto. 2) Manual 3) Sump...
Supplying, installing, testing and commissioning approved make centrifugal pump made of SS Construction suitable for building application. Thequoted rate shall also include for auto lvl.controller. pr...
Supplying, installing, testing and commissioning approved make dewatering submersible pump made of SS Construction suitable for building application. Thequoted rate shall also include for auto lvl.con...
Supplying, Installing, testing and commissioning approved make Terrace booster pump system comprising of Vertical Centrifugal pump mounted on a skid with company supplied automatic control panel overl...
EXTERNAL SEWAGE SYSTEM: Supplying, fixing and testing RCC/ PVC gully trap chamber of internal size 300 mm x 300 mm with rebated top square shape 150 mm x 150 mm x100 mm dia outlet set in 75 mm thick P...
Construction of inspection chamber with 230 mm thick best quality masonary blocks in CM 1 : 4 laid over a bed of 150 mm thick PCC 1 : 4 : 8, walls plastered smooth, internal plastering 12 mm thk in CM...
Construction of inspection chamber with 230 mm thick best quality masonary blocks in CM 1 : 4 laid over a bed of 150 mm thick PCC 1 : 4 : 8, walls plastered smooth, internal plastering 12 mm thk in CM...
Construction of inspection chamber with 230 mm thick best quality masonary blocks in CM 1 : 4 laid over a bed of 150 mm thick PCC 1 : 4 : 8, walls plastered smooth, internal plastering 12 mm thk in CM...
Construction of Conical manhole with 230 mm thick best quality masonary blocks in CM 1 : 4, 600 mm dia at top and 1200 mm dia at bottom clear. The bed concrete shall be minimum 150 mm. The manhole sha...
Construction of Conical manhole with 230 mm thick best quality masonary blocks in CM 1 : 4, 600 mm dia at top and 1200 mm dia at bottom clear. The bed concrete shall be minimum 150 mm. The manhole sha...
Supplying, fixing and testing PVC Foam core SN 8 of approved make laid to the required level and making necessary connections inclusive of all specials like bends, tees, offsets, cleanouts, junctions...
Supplying, fixing and testing PVC Foam core SN 8 of approved make laid to the required level and making necessary connections inclusive of all specials like bends, tees, offsets, cleanouts, junctions...
Supply, installation, testing and commissioning of RCC NP2 Class hume pipes conforming to IS : 458, with collar joint in CM 1 : 3 packing the collar joints with hemp rope dipped in cement slurry, fini...
EXTERNAL STORM WATER: Supply, installation, testing and commissioning of RCC NP2 Class hume pipes conforming to IS : 458, with collar joint in CM 1 : 3 packing the collar joints with hemp rope dipped ...
Supply, installation, testing and commissioning of RCC NP2 Class hume pipes conforming to IS : 458, with collar joint in CM 1 : 3 packing the collar joints with hemp rope dipped in cement slurry, fini...
Supplying, installing, testing and commissioning of PVC Foam core SN 8 of approved make laid to the required level and making necessary connections inclusive of all specials like bends, tees, offsets,...
Supplying, installing, testing and commissioning of uPVC PERFORATED pipes and fitting conforming (6 kg/sqcm) conforming to IS 4985-2000, including cutting, cleaning and with solvent joints.
Construction of Sub soil well with Precast RCC Rings of clear dimensions as mentioned in the drawing with RCC top cover slab and RCC pre-cast manhole of 600mm x 600mm, valve chamber of 450mm x 450mm,...
Construction of catch basin of following size using 230 mm thick best quality masonary blocks in CM 1 : 4 laid over a bed of 150 mm thick PCC 1 : 4 : 8, walls plastered smooth, internal plastering 12m...
Construction of catch basin of following size using 230 mm thick best quality masonary blocks in CM 1 : 4 laid over a bed of 150 mm thick PCC 1 : 4 : 8, walls plastered smooth, internal plastering 12m...
Construction of catch basin of following size using 230 mm thick best quality masonary blocks in CM 1 : 4 laid over a bed of 150 mm thick PCC 1 : 4 : 8, walls plastered smooth, internal plastering 12m...
Construction of Reharge pit of 1.2m dia and 3.0m deep, brick wall with precast RCC rings covering the top with RCC slab including supply and fixing RCC MH cover and filter media . The quoted rate sh...
Approved make Rainy Filter F L- 500 Works on Cohesive Force & Centrifugal force. Operating Pressure is less than 2 feet of head. The outer Housing is made of High Density Polyehtylene. Efficiency of ...
EXTERNAL WATER SUPPLY SYSTEM:(BASEMENT CEILING LVL. & GROUND FLOOR ): Supplying, installing, fixing, jointing, testing and commissioning of approved make sch 80 UPVC pipes and fittings, ASTM CTS, ASTM...
Supplying, installing, fixing, jointing, testing and commissioning of approved make sch 80 UPVC pipes and fittings, ASTM CTS, ASTM IPS. The fittings and specials such as tees, elbows, couplers, bends,...
Supplying, installing, fixing, jointing, testing and commissioning of approved make sch 80 UPVC pipes and fittings, ASTM CTS, ASTM IPS. The fittings and specials such as tees, elbows, couplers, bends,...
Supplying, installing, fixing, jointing, testing and commissioning of approved make sch 80 UPVC pipes and fittings, ASTM CTS, ASTM IPS. The fittings and specials such as tees, elbows, couplers, bends,...
Supplying, laying, jointing, testing &commissioning approved make class B CPVC and fittings confirming to IS 1239 PI & II, malleable fittings viz., tees, elbows, flanges, unions etc.,including cutting...
Supplying, laying, jointing, testing &commissioning approved make class B CPVC and fittings confirming to IS 1239 PI & II, malleable fittings viz., tees, elbows, flanges, unions etc.,including cutting...
Supplying, installing, testing and commissioning approved make cast brass body water meter with necessary unions for fixing on the inlet mains ; as shown on the drawing etc, complete with water meter ...
Providing and constructing Valve Chamber comprising 230MM Thick burnt brick masonry walls built in CM 1:4 over CC bed ,DI cover slab benching in CC 1:2:4 internal faces plastered smooth in CM 1:4, ...
Providing and Fixing Copper Float valve, etc,confirming to I.S.I specifications of approved make as per directions complete.80 mm dia for BWSSB UG Sump complete with all lead and lift etc, as per spe...
BASEMENT CEILING PIPE SYSTEM- DRAINAGE: Supplying, laying, jointing, testing and commissioning approved make Agriculture pipes of 10 Kg/cm2 with solvent joints confirming to IS 5382 for exposed pipi...
Supplying, laying, jointing, testing and commissioning approved make Agriculture pipes of 10 Kg/cm2 with Solvent joints confirming to IS 5382 for exposed piping in Ceiling .The quoted rate shall incl...
Supplying, laying, jointing, testing and commissioning approved make Agriculture pipes of 10 Kg/cm2 with Solvent joints confirming to IS 5382 for exposed piping in Ceiling .The quoted rate shall incl...
Supplying, laying, jointing, testing and commissioning approved make Agriculture pipes of 10 Kg/cm2 with Solvent joints confirming to IS 5382 for exposed piping in Ceiling .The quoted rate shall incl...
Supplying, laying, jointing, testing and commissioning approved make Agriculture pipes of 10 Kg/cm2 with Solvent joints confirming to IS 5382 for exposed piping in Ceiling .The quoted rate shall incl...
BASEMENT DRAIN SYSTEM: Construction of catch basin of size mentioned below upto 600mm clear internal dimension for storm water with 230mm thick walls in well burnt table moulded bricks in CM 1:4 over...
Supplying, laying, jointing, testing and commission-ing approved make SN 4 Foam core pipes confirming to IS 13592 with Solvent joints confirming to IS 5382. The quoted rate shall include necessary f...
Excavation in trenches in ordinary hard soil (other than in rock requiring chistelling and blasting) for laying subsoil pipes and refilling of trenches after pipes are laid in layers not exceeding 20...
SEWAGE TREATMENT PLANT: Supply of equipment & Installation Sewage treatment plant Electromechanical work. Cap :80 KLD complete with all lead and lift etc, as per specification and as per directed by t...
Supply and installation of puff sheet of 80mm thick complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge
Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal siz...
Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in require...
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings ...
Canopy (12mm thk laminated glass canopy - 2.8m width)complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge
Granite cladding complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge
Truss work (20 tons of steel @ rs.200/ kg) complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge
Providing and fixing wooden partition, mounted on a 2 frame with 19mm ply on either sides, with sound-proof material in between, as per the design and detailed drawing. Cost to include fasteners, 10mm...
12mm glazed partition with edge polished toughened glass fixed on to Aluminium C Channel on the floor and concealed beading at the top. 50 x 25mm size, 16 gauge aluminium sections framework placed at ...
Providing, fabricating and placing Single Leaf 32mm thick flush door , with floor spring, finished in 1mm thick Laminate of approved shade on both the surfaces of the shutter with 6mm thick grooves to...
10mm thk toughened glass door supported on dorma floor springs, door handle in 4 high 1-1/2 dia heavy duty SS C shaped pipe. The door should be provided with a manual lock, top pivot and bottom pivot ...
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized ...
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized ...
Providing and fixing in position 12mm thick plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling tiles up to a height of 5 m above floor level over a...
Providing & fixing Roller blinds of reputed make 38mm round Aluminium channel with approved fabric, telting with chain (Ball) system with all necessary fittings and fixtures as per direction of Engine...
Providing & fixing Roller blinds of reputed make 38mm round Aluminium channel with blackout fabric, telting with chain (Ball) system with all necessary fittings and fixtures as per direction of Engine...
Providing and fixing in position 6mm thick edge polished, toughened glass panels to the existing back partition/ Masonry wall / laminate finished surface in horizontal plane with necessary 2mm thick A...
Providing and fixing flawless 6mm thick mirror of approved quality with necessary bevelling as per the detail drawing. The mirror shall be fixed on 12mm thk plywood backing with stainless steel studs/...
WOOD WORK Under Granite counter in Pantry complete with all lead and lift etc, as per specification , Suitable design and as per directed by the Engineer in Charge
WOOD WORK Overhead storage in Pantry complete with all lead and lift etc, as per specification,Suitable design and as per directed by the Engineer in Charge
WOOD WORK Cladding complete with all lead and lift etc, as per specification,Suitable design and as per directed by the Engineer in Charge
STORAGESLow Height complete with all lead and lift etc, as per specification,Suitable design and as per directed by the Engineer in Charge
STORAGES Full height complete with all lead and lift etc, as per specification,Suitable design and as per directed by the Engineer in Charge
WORKSTATIONS BP ergo, Wipro, Monarch, Ergotek, Merryfair or equivalent makes complete with all lead and lift etc, as per specification,Suitable design and as per directed by the Engineer in Charge
Providing & fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate...
Providing & fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate...
Providing & fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate...
Providing & fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate...
Providing & fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate...
Chairs Top Cadre Officials -wire mesh with nylon fabric. complete with all lead and lift etc, as per specification,Suitable design and as per directed by the Engineer in Charge
Chairs Visitors - Upholstery fabic complete with all lead and lift etc, as per specification,Suitable design and as per directed by the Engineer in Charge
Chairs Board room chairs wire mesh with nylon fabric complete with all lead and lift etc, as per specification,Suitable design and as per directed by the Engineer in Charge
Sofa Providing and fixing Single seater leather Sofa with cushion of size 3(L)x2.5(W) X2.75(H) ft made of upholstery leather with seats fitted with padding, springs, webbing and as per direction of e...
Sofa Providing and fixing Two seater leather Sofa with cushion of size 5(L)x2.5(W) X2.75(H) ft made of upholstery leather with seats fitted with padding, springs, webbing and as per direction of engi...
Sofa Providing and fixing Three seater leather Sofa with cushion of size 7(L)x2.5(W) X2.75(H) ft made of upholstery leathyer with seats fitted with padding, springs, webbing and as per direction of ...
Providing and fixing frosted film of approved make on glass partition and doors in pattern as per drawings as per manufactures specifications etc. complete. Rate of the film shall be inclusive of subm...
2 BAY OPTIMIZER PLUS-DRIVE TYPE (1200W, 400D,1980H) (a) Overall Dimensions of SD-2 Single Drive Cover Unit 2 Bay(U/C plus Fittings plus Cover) shall be 2400mm (W) x 400 mm (D)x2121.5mm(H). The Constru...
3 BAY OPTIMIZER PLUS-DRIVE TYPE (1200W, 400D,1980H) (a) Overall Dimensions of SD 3 Single Drive Cover Unit 3 Bay(U/C plus Fittings plus Cover) shall be 3600mm(W)x400mm(D)x2121.5mm(H). The Construction...
Overall Dimensions of SD 4 Single Drive Cover Unit 4 Bay(U/C plus Fitting plus Cover) shall be 4800mm(W)x400mm(D)x2121.5mm(H). The Construction shall be rigid knock down made out of 0.8 thick CRCA ste...
Electrical: Suppy portion for HT works: Supply of 11 KV - Ring Main Unit - Outdoor (IP55 with Canopy) Ring Main Unit - 11kV, Oudoor, With Incomer 2nos.LBS of rating 200A and out going 1no of 200A, ...
Supply, of Tri Vector Meter cubicle with LBS made of 2mm thick CRCA sheet steel, free standing, outdoor type (IP55) degree of protection. The outdoor cubicle shall be suitable for mounting Tri Vector...
11 kV - 1 Module HT Panel - Outdoor (IP55 with Canopy) HT Panel, 11kV, Outdoor, Comprising of 11 KV, 400A, VCB,Horizontal Draw out type Breaker. refer distribution scheme for protections and relays...
Supply, of outdoor type 11KV / 433V 3 phase 50 Hz, DYn11, 630 KVA ONAN type Oil type Transformer with OLTC and RTCC with +/- 10% in steps of 2.5% IS :1180, Level 2 terminal arrangement of HT side c...
same as above for 250KVA with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply, 3 way LBS of 630 A, 350 MVA with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
HT CABLE 11000V grade, earthed XLPE cable. The Quantities(mtrs) given in the BOQ are near to accuracy and the contractor has to take actual measurements at site for the exact quantities of materials r...
End termination of cables using Raychem Heat shrinkable kits 3C-240 Sq.mm (Outdoor) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
EARTHING Supply & Providing 2.5 mtrs long 50 mm dia. G.I. Pipe electrode earth station for Body Earthing including construction of brick masonary, providing meshed funnel, CI cover and other civil Eng...
Supply and Providing Copper Earth Station, with 600x600x3.15mm Copper plate at 2500mm depth including construction of brick pedestal, providing meshed funnel, CI cover and other civil Engineering work...
EARTH STRIPS GI / Cu earth strips on cable tray or below ground as per site condition. All Cu. Strips shall run in pvc heat shirnkable sleeve & mounted on insulation mounts. Cost of civil works shall ...
25 x 6 mm GI Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
25 x 6 mm CU Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
MISCELLANEOUS ITEMS Supply and erection of Dismantable 12 SWG GI chain link fence 2.5M high with necessary MS angle, 2 nos. gate, 65mm metal spread and necessary civil works as required.-Based on Arch...
Supplying, of 6KGF/Cmr2, Class 3, 50mm dia PVC pipes confirming to IS 4985 - 2000 inclusive of all necessary bends, tees, offsets, junctions, cowls, etc., laid under floor with all lead and lifts...
RCC HUME PIPES Providing and of 2m length RCC hume pipe for HT cable laying at the road crossing or wherever necessary as per site condition. Cost to include RCC collar and necessary civil works as ...
INSPECTION CHAMBERS Construction of brick masonary inspectioin chamber wit 75 class designation bricks in cement mortar1:4, RCC top slab with 1:2:4 mix, foundation concrete 1:4:8 mix, inside plasterin...
0.45mtr x 0.45mtr x 0.9r Cable Inspection Chamber with pre cast Cover with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of HT cable route markers / joints indicating slabs as per MSB requirement with necessary excavation and concreating as required to complete the installation. with all lead and lifts complete ...
11kV Reflector Danger Board with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Gate for Transformer and RMU yard, with frame. with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
40mm gelly for 150mm depth in outdoor RMU yard. with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
LABOUR PORTION FOR HT WORKS: installation of 11 KV - Ring Main Unit - Outdoor (IP55 with Canopy) Ring Main Unit - 11kV, Oudoor, With Incomer 2nos.LBS of rating 200A and out going 1no of 200A, ratin...
Installation, Testing & Commissioning of Tri Vector Meter cubicle with LBS made of 2mm thick CRCA sheet steel, free standing, outdoor type (IP55) degree of protection. The outdoor cubicle shall be sui...
11 kV - 1 Module HT Panel - Outdoor (IP55 with Canopy) HT Panel, 11kV, Outdoor, Comprising of 11 KV, 400A, VCB,Horizontal Draw out type Breaker. refer distribution scheme for protections and relays...
erection ,Unloading, Leading, Positioning, Erecting, Earthing, Testing and Commissioning of outdoor type 11KV / 433V 3 phase 50 Hz, DYn11, 630 KVA ONAN type Oil type Transformer with OLTC and RTCC wi...
same as above for 250KVA with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply, erection, testing and commisioning 3 way LBS of 630 A, 350 MVA with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
HT CABLE 11000V grade, earthed XLPE cable. The Quantities(mtrs) given in the BOQ are near to accuracy and the contractor has to take actual measurements at site for the exact quantities of materials r...
End termination of cables using Raychem Heat shrinkable kits 3C-240 Sq.mm (Outdoor) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
EARTHING Providing 2.5 mtrs long 50 mm dia. G.I. Pipe electrode earth station for Body Earthing including construction of brick masonary, providing meshed funnel, CI cover and other civil Engineering ...
Providing Copper Earth Station, with 600x600x3.15mm Copper plate at 2500mm depth including construction of brick pedestal, providing meshed funnel, CI cover and other civil Engineering works, spreadin...
EARTH STRIPS GI / Cu earth strips on cable tray or below ground as per site condition. All Cu. Strips shall run in pvc heat shirnkable sleeve & mounted on insulation mounts. Cost of civil works shall ...
25 x 6 mm GI Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
25 x 6 mm CU Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
MISCELLANEOUS ITEMS erection of Dismantable 12 SWG GI chain link fence 2.5M high with necessary MS angle, 2 nos. gate, 65mm metal spread and necessary civil works as required.-Based on Architect recom...
fixing and testing of 6KGF/Cmr2, Class 3, 50mm dia PVC pipes confirming to IS 4985 - 2000 inclusive of all necessary bends, tees, offsets, junctions, cowls, etc., laid under floor with all lead an...
RCC HUME PIPES laying of 2m length RCC hume pipe for HT cable laying at the road crossing or wherever necessary as per site condition. Cost to include RCC collar and necessary civil works as require...
INSPECTION CHAMBERS Construction of brick masonary inspectioin chamber wit 75 class designation bricks in cement mortar1:4, RCC top slab with 1:2:4 mix, foundation concrete 1:4:8 mix, inside plasterin...
0.45mtr x 0.45mtr x 0.9r Cable Inspection Chamber with pre cast Cover with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
installation of HT cable route markers / joints indicating slabs as per MSB requirement with necessary excavation and concreating as required to complete the installation. with all lead and lifts comp...
11kV Reflector Danger Board with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Gate for Transformer and RMU yard, with frame. with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
40mm gelly for 150mm depth in outdoor RMU yard. with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
STATUTARY APPROVALS Preparation & submission of applications, Liasioning with EB for getting Load sanction, Availing EB supply & all necessary co-ordination upto completion of the project. (All statut...
Preparation of CEIG drawings, Liasioning with CEIG for getting drawing approval, arranging inspection, getting safety certificate & preparation& submission of AS BUILT drawings. Four Sets of paper pri...
Deposits to BESCOM for taking power supply with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
SUPPLY PORTION FOR EXTERNAL LT WORKS: LT kiosk (As per Main Single Line Diagram) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Main LT Panel (As per Main Single Line Diagram) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
ACCP Panel (As per Main Single Line Diagram) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Utility Panel (As per Main Single Line Diagram) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
PHE Panel with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
CA Panel with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
CA Panel with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Main Lift Panel
EMG MLDB (As per Main Single Line Diagram) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
10kVA 3phase In & 3Phase out Inverter with 90min battery backup with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
10kVA 3phase In & 3Phase out UPS with 90min battery backup with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Lift panel (As per Main Single Line Diagram) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Floor panel (As per Main Single Line Diagram) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
40A DP ISOLATOR with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
40A 4P ISOLATOR with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
CABLES and End terminations XLPE Insulated & Steel Armoured Aluminium Conductor Cables Supply, Laying, Testing and Commissioning of stranded XLPE/PVC insulated, Armoured/Unarmoured/Flexible, Aluminu...
End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
3.5 Core X 240 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
3.5 Core X 185 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
3.5 Core X 150 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
3.5 Core X 35 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
4 Core X 16 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
4 Core X 6 Sqmm including terminations (For externallights) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
3 Core X 6 Sqmm including terminations (For externallights) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
PVC Insulated & Steel Armoured Copper Conductor cables (YFY Type) 3Core X 10 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
1Core X 10 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
4Core X 16 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
EXTERNAL LIGHTING DB Three phase MCB DB with multi channel programmable timers, contactors, auto/manual selector switchs, phase indicating lamps, day light sensors etc complete. with all lead and li...
Lighting & Raw Power Distribution boards Flexi tier DB Incomer : 1No. 63A, 4P, MCB C curve & Sub incomer 3Nos 40A DP 30mA RCCB Outgoing : 18 Nos. 10A SP MCB of C curve Emergency lighting with all lea...
12 WAY SPN DB Incomer : 1Nos 32A DP 30mA RCCB Outgoing : 5 Nos. 10A SP MCB of D curve 5 Nos. 16A SP MCB of D curve with all lead and lifts complete as per specifications and directions of engineer...
Lighting Circuit Supply of 2RX2.5Sq.mm + 1Rx1.5 Sqmm PVC insulated FRLS Multi strand copper conductor wire drawn in 20mm dia PVC conduit as lighting circuit. The circuit main shall be measured in ...
Power ciruit Supply of 2RX4Sq.mm + 1Rx2.5 Sqmm PVC insulated FRLS Multi strand copper conductor wire drawn in 25mm dia PVC conduit as submain circuit. The circuit main shall be measured in running m...
Emergency lighting, ELV circuit: Supply of wiring using 3RX1.5 sqmm PVC insulated FRLS wire drawn in 20mm dia 2mm thick PVC conduit being recond from the distribution board to emergency ligh...
Elevator Shaft Lighting. comprising of : - a. Type philips NXC 101 Bulk head light fixture with 100 W GLS lamp - 5Nos b. 6A 3 Pin switched socket outlet - 5 sets c. Wiring for 5 light points controlle...
PRIMARY LIGHT POINT I. Primary light point means wiring from first switch control to the first light outlet. The switch and all necessary accessories would be part of primary point. II. Not to...
SECONDARY LIGHT POINT I. Secondary light point means extention of light outlet from existing primary point. Same to be controlled by the existing switch of primary point. ( If the single light has m...
SECONDARY LIGHT POINT I. Secondary light point means extention of light outlet from existing primary point with ceiling rose & complete accessories. Same to be controlled by the existing MCB...
Single light point controlled by 6A two way switches. with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Industrial type sockets shall be of Polycarbonate body with plug top & locking facility. All switch / sockets shall be provided with printed labels / stickers indicating source code. Colour ...
1 no. 5 pin 6A switched socket outlet (Dependent). with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
6 / 16A 5 pin switched socket outlet. with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Industrial Sockets (to be IP 55/66) 16A 3pin 1phase Industrial socket with plug top controlled by 16A DP MCB enclosed in sheet metal box with necessary accessories complete as required with all ...
Supply and Fixing of flush mounting GI switch boxes concealed in wall with proper allignment and used for light, fan, sockets, switch, fan regulator, foot lamp of all fixing materials as require...
3M with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
TELEPHONE & TV RELATED WORKS Multi - pair Krone tag block housed in MS enclosure duly powder coated. The enclosure shall have adequate space for operation and maintenance of telephone wires. 300 pair ...
100 pair with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply and fixing of ONT (Optical Network terminal) box with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
CAT6 cable in 20mm dia PVC conduit for Telephone & Data with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of 75 Ohms(RG11) co-axial cable for TV network in 20 mm dia PVC conduit inside home with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of modular type TV socket outlet. With mounting box. with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of RJ-45 modem jack outlet with shutter for computer with mounting box. with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply, of 12W LED Bulk head Light Fixture with glass & lamp and all other fixing accessories as required. with all lead and lifts complete as per specifications and directions of engineer in charge...
Supply of external light fixturesSmart Bright street light 45W suitable for uniform street lighting It has Robust aluminum die-casting housing, IP66 & IK08 protection & PC cover with integrated opti...
Supply of 6mtr long MS octognal pole with all required accessories to be installed on driveway side with cable entry chambers . Includes excavation works to install with all lead and lifts complete ...
Supply of 1.5 mtr single cross arm to install the light with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of Light fixting near entry & exit gates with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
40W 1200mm length Suspended batten light with electronic driver-6000K,4000 lumen with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
18W recess mounted downlight (Staircase) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
11W Bulkhead Light for Ramp & Terrace with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
18W recess mounted downlight (Staircase) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
EARTHING Supply & Providing 2.5 mtrs long 50 mm dia. G.I. Pipe electrode earth station for Body Earthing including construction of brick masonary, providing meshed funnel, CI cover and other civil Eng...
Supply and Providing Copper Earth Station, with 600x600x3.15mm Copper plate at 2500mm depth including construction of brick pedestal, providing meshed funnel, CI cover and other civil Engineering work...
EARTH STRIPS GI / Cu earth strips on cable tray or below ground as per site condition. All Cu. Strips shall run in pvc heat shirnkable sleeve & mounted on insulation mounts. Cost of civil works shall ...
25 x 6 mm GI Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
25 x 3 mm GI Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
25 x 6 mm CU Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
FIELD TEST Post commisioning test to carry out and extract the result of installed earthing system for each of the earth station till the earthing terminal. The rate shall also includes necessary 3rd...
RCC HUME PIPES Providing and laying of 2m length RCC hume pipe for HT cable laying at the road crossing or wherever necessary as per site condition. Cost to include RCC collar and necessary civil wor...
150mm Dia RCC Hume pipe with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
INSPECTION CHAMBERS Construction of brick masonary inspectioin chamber wit 75 class designation bricks in cement mortar1:4, RCC top slab with 1:2:4 mix, foundation concrete 1:4:8 mix, inside plasterin...
6mtr x 0.6mtr x 0.9mtr Cable Inspection Chamber with pre cast Cover with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Fire bucket with stand suitable for 2 buckets of round shape bottom, painted red marked FIRE and duly filled with river sand. with all lead and lifts complete as per specifications and directions of e...
433V Reflector Danger Board with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Earthing strip of 2Run of 25x6mm GI for entire length of the tray to be considered. Cost to include the same. This GI strip to be used for tapping body earthing to panels as designed in earthing sche...
Size of Cable Tray :300 mm x 50 mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Size of Cable Tray : 100 mm x 50 mmwith all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Perforated type cable tray Supply & installation of Pre fabricated Hot -dip galvanised Perforated cable tray system made of 2mm thick sheet steel folded with two longitudinal side rails connected by...
Size of Cable Tray :450 mm x 50 mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of MS channels / angles, flat sections for cable trays, tray supports, Panel / DB mounting frames, insert plates, Busduct supports etc., as directed at site. All fabricated items shall be paint...
Rubber mat 1100V grade ISI approved - 1 m x 0.5m with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Shock treatment chart as approved by the Electrical Inspectorate mounted on teak wood frame and suitable for wall mounting in 3 languages (Telugu, English & Hindi) with all lead and lifts complete as...
First aid kit with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Danger boards with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply & fixing of rubber gloves, gloves stand with wall mounting of Approved Make & as per supply voltage with all lead and lifts complete as per specifications and directions of engineer in charge o...
Laminated Schematic with glass frame with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
MS Fabricated Items with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
LABOUR CHARGES FOR EXTERNAL LT WORKS SUPPLY PORTION FOR EXTERNAL LT WORKS: LT kiosk (As per Main Single Line Diagram) with all lead and lifts complete as per specifications and directions of enginee...
Main LT Panel (As per Main Single Line Diagram) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
ACCP Panel (As per Main Single Line Diagram) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Utility Panel (As per Main Single Line Diagram) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
PHE Panel with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
CA Panel with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
CA Panel with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Main Lift Panel
EMG MLDB (As per Main Single Line Diagram) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
10kVA 3phase In & 3Phase out Inverter with 90min battery backup with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
10kVA 3phase In & 3Phase out UPS with 90min battery backup with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Lift panel (As per Main Single Line Diagram) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Floor panel (As per Main Single Line Diagram) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
40A DP ISOLATOR with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
40A 4P ISOLATOR with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
CABLES and End terminations XLPE Insulated & Steel Armoured Aluminium Conductor Cables Supply, Laying, Testing and Commissioning of stranded XLPE/PVC insulated, Armoured/Unarmoured/Flexible, Aluminu...
End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
3.5 Core X 240 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
3.5 Core X 185 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
3.5 Core X 150 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
3.5 Core X 50 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
3.5 Core X 35 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
4 Core X 16 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
4 Core X 6 Sqmm including terminations (For externallights) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
3 Core X 6 Sqmm including terminations (For externallights) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
PVC Insulated & Steel Armoured Copper Conductor cables (YFY Type) 3Core X 10 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
1Core X 10 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
4Core X 16 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
EXTERNAL LIGHTING DB Three phase MCB DB with multi channel programmable timers, contactors, auto/manual selector switchs, phase indicating lamps, day light sensors etc complete. with all lead and li...
Lighting & Raw Power Distribution boards Flexi tier DB Incomer : 1No. 63A, 4P, MCB C curve & Sub incomer 3Nos 40A DP 30mA RCCB Outgoing : 18 Nos. 10A SP MCB of C curve Emergency lighting with all lea...
12 WAY SPN DB Incomer : 1Nos 32A DP 30mA RCCB Outgoing : 5 Nos. 10A SP MCB of D curve 5 Nos. 16A SP MCB of D curve with all lead and lifts complete as per specifications and directions of engineer...
Lighting Circuit Supply & Installation of 2RX2.5Sq.mm + 1Rx1.5 Sqmm PVC insulated FRLS Multi strand copper conductor wire drawn in 20mm dia PVC conduit as lighting circuit. The circuit main shall b...
Power ciruit Installation of 2RX4Sq.mm + 1Rx2.5 Sqmm PVC insulated FRLS Multi strand copper conductor wire drawn in 25mm dia PVC conduit as submain circuit. The circuit main shall be measured in runn...
Emergency lighting, ELV circuit: Installation of wiring using 3RX1.5 sqmm PVC insulated FRLS wire drawn in 20mm dia 2mm thick PVC conduit being recond from the distribution board to emergenc...
Elevator Shaft Lighting. comprising of : - a. Type philips NXC 101 Bulk head light fixture with 100 W GLS lamp - 5Nos b. 6A 3 Pin switched socket outlet - 5 sets c. Wiring for 5 light points controlle...
PRIMARY LIGHT POINT I. Primary light point means wiring from first switch control to the first light outlet. The switch and all necessary accessories would be part of primary point. II. Not to...
SECONDARY LIGHT POINT I. Secondary light point means extention of light outlet from existing primary point. Same to be controlled by the existing switch of primary point. ( If the single light has m...
SECONDARY LIGHT POINT I. Secondary light point means extention of light outlet from existing primary point with ceiling rose & complete accessories. Same to be controlled by the existing MCB...
Single light point controlled by 6A two way switches. with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Industrial type sockets shall be of Polycarbonate body with plug top & locking facility. All switch / sockets shall be provided with printed labels / stickers indicating source code. Colour ...
1 no. 5 pin 6A switched socket outlet (Dependent). with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
6 / 16A 5 pin switched socket outlet. with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Industrial Sockets (to be IP 55/66) 16A 3pin 1phase Industrial socket with plug top controlled by 16A DP MCB enclosed in sheet metal box with necessary accessories complete as required with all ...
Supply and Fixing of flush mounting GI switch boxes concealed in wall with proper allignment and used for light, fan, sockets, switch, fan regulator, foot lamp of all fixing materials as require...
3M with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
TELEPHONE & TV RELATED WORKS Multi - pair Krone tag block housed in MS enclosure duly powder coated. The enclosure shall have adequate space for operation and maintenance of telephone wires. 300 pair ...
100 pair with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply and fixing of ONT (Optical Network terminal) box with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
CAT6 cable in 20mm dia PVC conduit for Telephone & Data with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
laying of 75 Ohms(RG11) co-axial cable for TV network in 20 mm dia PVC conduit inside home with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
fixing of modular type TV socket outlet. With mounting box. with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
fixing of RJ-45 modem jack outlet with shutter for computer with mounting box. with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Erection, Testing & Commissioning of 12W LED Bulk head Light Fixture with glass & lamp and all other fixing accessories as required. with all lead and lifts complete as per specifications and directi...
installation of external light fixturesSmart Bright street light 45W suitable for uniform street lighting It has Robust aluminum die-casting housing, IP66 & IK08 protection & PC cover with integrated...
installation of 6mtr long MS octognal pole with all required accessories to be installed on driveway side with cable entry chambers . Includes excavation works to install with all lead and lifts comp...
installation of 1.5 mtr single cross arm to install the light with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
installation of Light fixting near entry & exit gates with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
40W 1200mm length Suspended batten light with electronic driver-6000K,4000 lumen with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
18W recess mounted downlight (Staircase) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
11W Bulkhead Light for Ramp & Terrace with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
18W recess mounted downlight (Staircase) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
EARTHING Supply & Providing 2.5 mtrs long 50 mm dia. G.I. Pipe electrode earth station for Body Earthing including construction of brick masonary, providing meshed funnel, CI cover and other civil Eng...
Providing Copper Earth Station, with 600x600x3.15mm Copper plate at 2500mm depth including construction of brick pedestal, providing meshed funnel, CI cover and other civil Engineering works, spreadin...
EARTH STRIPS GI / Cu earth strips on cable tray or below ground as per site condition. All Cu. Strips shall run in pvc heat shirnkable sleeve & mounted on insulation mounts. Cost of civil works shall ...
25 x 6 mm GI Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
25 x 3 mm GI Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
25 x 6 mm CU Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
FIELD TEST Post commisioning test to carry out and extract the result of installed earthing system for each of the earth station till the earthing terminal. The rate shall also includes necessary 3rd...
RCC HUME PIPES Providing and laying of 2m length RCC hume pipe for HT cable laying at the road crossing or wherever necessary as per site condition. Cost to include RCC collar and necessary civil wor...
150mm Dia RCC Hume pipe with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
INSPECTION CHAMBERS Construction of brick masonary inspectioin chamber wit 75 class designation bricks in cement mortar1:4, RCC top slab with 1:2:4 mix, foundation concrete 1:4:8 mix, inside plasterin...
6mtr x 0.6mtr x 0.9mtr Cable Inspection Chamber with pre cast Cover with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Fire bucket with stand suitable for 2 buckets of round shape bottom, painted red marked FIRE and duly filled with river sand. with all lead and lifts complete as per specifications and directions of e...
433V Reflector Danger Board with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Ladder type cable tray Supply & installation of Hot -dip galvanized cable rack system made of 2mm thick sheet steel folded with two longitudinal side rails connected by rungs at regular intervals o...
Size of Cable Tray :300 mm x 50 mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Size of Cable Tray : 100 mm x 50 mmwith all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Perforated type cable tray Supply & installation of Pre fabricated Hot -dip galvanised Perforated cable tray system made of 2mm thick sheet steel folded with two longitudinal side rails connected by...
Size of Cable Tray :450 mm x 50 mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
fabrication& installation of MS channels / angles, flat sections for cable trays, tray supports, Panel / DB mounting frames, insert plates, Busduct supports etc., as directed at site. All fabricated i...
Rubber mat 1100V grade ISI approved - 1 m x 0.5m with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Shock treatment chart as approved by the Electrical Inspectorate mounted on teak wood frame and suitable for wall mounting in 3 languages (Telugu, English & Hindi) with all lead and lifts complete as...
First aid kit with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Danger boards with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply & fixing of rubber gloves, gloves stand with wall mounting of Approved Make & as per supply voltage with all lead and lifts complete as per specifications and directions of engineer in charge o...
Laminated Schematic with glass frame with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
MS Fabricated Items with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of internal lighting works:LUX LEVEL REPORT TO BE SUBMITTED 1200MM 1x40W SUSPENDED LED LIGHT FIXTURE FOR NORMAL LIGHTING APPLICATIONS-5700K WORKSTATION with all lead and lifts complete as pe...
40W 2400mm SUSPENDED LINEAR LIGHT FIXTURE WITH ELECTRONIC DRIVER WITH 4000K WORKSTATION with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
30W 1800mm SUSPENDED LINEAR LIGHT FIXTURE WITH ELECTRONIC DRIVER WITH 4000K WORKSTATION with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
20W 1200mm SUSPENDED LINEAR LIGHT FIXTURE WITH ELECTRONIC DRIVER WITH 4000K WORKSTATION with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
31W 600x600mm RECESSED LIGHT FIXTURE WITH ELECTRONIC DRIVER WITH 4000K RECORDS ROOM, BOARD ROOM & MULTI PURPOSE HALL with all lead and lifts complete as per specifications and directions of engineer i...
15W LED RECESSED MOUNTED CIRCULAR DOWN LIGHT FIXTURE WITH 4000K, COOL DAY WHITE ,FOR NORMAL LIGHTING APPLICATIONS CABIN, MEETING ROOM, CORRIDORS, BOARD ROOM, ANTE ROOM, STORE with all lead and lifts...
18W LED RECESSED MOUNTED CIRCULAR DOWN LIGHT FIXTURE WITH 4000K, COOL DAY WHITE ,FOR NORMAL LIGHTING APPLICATIONS with all lead and lifts complete as per specifications and directions of engineer in ...
15W LED SURFACE MOUNTED CIRCULAR DOWN LIGHT FIXTURE WITH 4000K, COOL DAY WHITE ,FOR NORMAL LIGHTING APPLICATIONS with all lead and lifts complete as per specifications and directions of engineer in c...
20W LED TRACK LIGHTS WITH 1MTR/2MTR SUSPENDED TRACK with all lead and lifts complete as per specifications and directions of engineer in charge of the work. WORKSTATION, RECEPTION
50/60W 2000MM DIA SUSPENDED DECORATIVE LIGHT FIXTURE WITH ELECTRONIC DRIVER AND WITH 4000K LAMPS with all lead and lifts complete as per specifications and directions of engineer in charge of the work...
40/50W 1500MM DIA SUSPENDED DECORATIVE LIGHT FIXTURE WITH ELECTRONIC DRIVER AND WITH 4000K LAMPS with all lead and lifts complete as per specifications and directions of engineer in charge of the work...
30/40W 400MM/500MM DIA SUSPENDED DECORATIVE LIGHT FIXTURE WITH ELECTRONIC DRIVER AND WITH 4000K LAMPS with all lead and lifts complete as per specifications and directions of engineer in charge of the...
30/40W 400MM/500MM DIA SUSPENDED DECORATIVE LIGHT FIXTURE WITH ELECTRONIC DRIVER AND WITH 4000K LAMPS with all lead and lifts complete as per specifications and directions of engineer in charge of the...
30/40W 200MM DIA SUSPENDED DECORATIVE LIGHT FIXTURE WITH ELECTRONIC DRIVER AND WITH 4000K LAMPS with all lead and lifts complete as per specifications and directions of engineer in charge of the work....
30/40W 600MM DIA SUSPENDED DECORATIVE LIGHT FIXTURE WITH ELECTRONIC DRIVER AND WITH 4000K LAMPS with all lead and lifts complete as per specifications and directions of engineer in charge of the work....
Linear Suspended Direct luminaire Pureline slim 50 mm width for Standalone/Continuous installation with efficacy greater than100lm/W System Power 100W
CCT 5700 ; CRIgreater than80 Fixed output / DALI ...
14W/MTR LED STRIP LIGHT WITH ELECTRONIC DRIVER PER 5MTRS WITH 3000K with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
For installationLUX LEVEL REPORT TO BE SUBMITTED 1200MM 1x40W SUSPENDED LED LIGHT FIXTURE FOR NORMAL LIGHTING APPLICATIONS-5700K WORKSTATION with all lead and lifts complete as per specifications a...
40W 2400mm SUSPENDED LINEAR LIGHT FIXTURE WITH ELECTRONIC DRIVER WITH 4000K WORKSTATION with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
30W 1800mm SUSPENDED LINEAR LIGHT FIXTURE WITH ELECTRONIC DRIVER WITH 4000K WORKSTATION with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
20W 1200mm SUSPENDED LINEAR LIGHT FIXTURE WITH ELECTRONIC DRIVER WITH 4000K WORKSTATION with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
31W 600x600mm RECESSED LIGHT FIXTURE WITH ELECTRONIC DRIVER WITH 4000K RECORDS ROOM, BOARD ROOM & MULTI PURPOSE HALL with all lead and lifts complete as per specifications and directions of engineer i...
15W LED RECESSED MOUNTED CIRCULAR DOWN LIGHT FIXTURE WITH 4000K, COOL DAY WHITE ,FOR NORMAL LIGHTING APPLICATIONS CABIN, MEETING ROOM, CORRIDORS, BOARD ROOM, ANTE ROOM, STORE with all lead and lifts...
18W LED RECESSED MOUNTED CIRCULAR DOWN LIGHT FIXTURE WITH 4000K, COOL DAY WHITE ,FOR NORMAL LIGHTING APPLICATIONS with all lead and lifts complete as per specifications and directions of engineer in ...
15W LED SURFACE MOUNTED CIRCULAR DOWN LIGHT FIXTURE WITH 4000K, COOL DAY WHITE ,FOR NORMAL LIGHTING APPLICATIONS with all lead and lifts complete as per specifications and directions of engineer in c...
20W LED TRACK LIGHTS WITH 1MTR/2MTR SUSPENDED TRACK with all lead and lifts complete as per specifications and directions of engineer in charge of the work. WORKSTATION, RECEPTION
50/60W 2000MM DIA SUSPENDED DECORATIVE LIGHT FIXTURE WITH ELECTRONIC DRIVER AND WITH 4000K LAMPS with all lead and lifts complete as per specifications and directions of engineer in charge of the work...
40/50W 1500MM DIA SUSPENDED DECORATIVE LIGHT FIXTURE WITH ELECTRONIC DRIVER AND WITH 4000K LAMPS with all lead and lifts complete as per specifications and directions of engineer in charge of the work...
30/40W 400MM/500MM DIA SUSPENDED DECORATIVE LIGHT FIXTURE WITH ELECTRONIC DRIVER AND WITH 4000K LAMPS with all lead and lifts complete as per specifications and directions of engineer in charge of the...
30/40W 400MM/500MM DIA SUSPENDED DECORATIVE LIGHT FIXTURE WITH ELECTRONIC DRIVER AND WITH 4000K LAMPS with all lead and lifts complete as per specifications and directions of engineer in charge of the...
30/40W 200MM DIA SUSPENDED DECORATIVE LIGHT FIXTURE WITH ELECTRONIC DRIVER AND WITH 4000K LAMPS with all lead and lifts complete as per specifications and directions of engineer in charge of the work....
30/40W 600MM DIA SUSPENDED DECORATIVE LIGHT FIXTURE WITH ELECTRONIC DRIVER AND WITH 4000K LAMPS with all lead and lifts complete as per specifications and directions of engineer in charge of the work....
Linear Suspended Direct luminaire Pureline slim 50 mm width for Standalone/Continuous installation with efficacy greater than100lm/W System Power 100W
CCT 5700 ; CRIgreater than80 Fixed output / DALI ...
14W/MTR LED STRIP LIGHT WITH ELECTRONIC DRIVER PER 5MTRS WITH 3000K with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Internal LT works-3 Supply portion: Lighting & Raw Power Distribution board Flexi tier DB Incomer : 1No. 40A, 4P, MCB C curve & Sub incomer 3Nos 40A DP 30mA RCCB Outgoing : 30 Nos. 10A SP MCB of C cur...
Emergency lighting 12 WAY SPN DB Incomer : 1Nos 32A DP 30mA RCCB Outgoing : 5 Nos. 10A SP MCB of D curve 5 Nos. 16A SP MCB of D curve with all lead and lifts complete as per specifications and direc...
UDBs : FABRICATED DB Incomer : 1No. 63A TP+2N, MCB 3Nos. 63A DP, MCB (D-Curve) Outgoing : 24 Nos. 20A DP 30mA, RCBO SI - SERIES with all lead and lifts complete as per specifications and directions...
Lighting Circuit: .Supply & Installation of wiring using 3RX2.5 sqmm PVC insulated FRLS wire drawn in 20mm dia 2mm thick PVC conduit as lighting circuit. The circuit main shall be measured in runn...
Emergency lighting, ELV circuit: Supply & Installation of wiring using 3RX1.5 sqmm PVC insulated FRLS wire drawn in 20mm dia 2mm thick PVC conduit being recond from the distribution board to ...
UPS / RP Circuit : Supply & Installation of 3 C x 4 Sqmm FRLS 1100V unarmoured double insulated flexible multicore cable in white and black colour for UPS & RP circuit respectively in existi...
UPS / RP Circuit : Supply & Installation of 3 C x 4 Sqmm FRLS 1100V unarmoured double insulated flexible multicore cable in white and black colour for UPS & RP circuit respectively in existi...
UPS Circuit - Server/HUB room rack Supply & Installation of 3 C x 4 Sqmm FRLS 1100V unarmoured double insulated flexible multicore cable in white and black colour for UPS & RP circuit resp...
POINT WIRING POINT WIRING - SWITCH CONTROL Supply, installation, Testing and Commissioning of point wiring using 3R x 1.5 Sqmm FRLS 1100V wire of approved make drawn in 20mm dia 2mm thick rigid ...
SECONDARY LIGHT POINT I. Secondary light point means extention of light outlet from existing primary point. Same to be controlled by the existing switch of primary point. II. Ceiling flexible cond...
WITHOUT BOX 1x6A socket controlled by 16A switch - UPS power with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
2x6/16A socket controlled by 16A switch - UPS power with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
1x6/16A universal socket controlled by 16A switch - UPS power with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
1x6/16A universal socket controlled by 16A switch - Raw power with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Hub room Rack Sockets - With Box 1No. 20A 3 pin 1phase Industrial type socket with plug top controlled by 16A DP MCB enclosed in sheet metal box with able to mount on wall / raceway with...
Industrial Sockets (to be IP 55/66) 20A Industrial socket controlled by 20A SP MCB (MCB below as separate control) enclosed in sheet metal box with necessary accessories complete as ...
16A 3pin 1phase Industrial socket with plug top controlled by 16A DP MCB enclosed in sheet metal box with necessary accessories complete as required with all lead and lifts complete as per speci...
32A 5pin 3phase Industrial socket with plug top controlled by 32A FP MCB enclosed in sheet metal box with necessary accessories complete as required with all lead and lifts complete as per spec...
250 x 180 x 75mm readymade floor mounted Junction box to locate 1sets of 3x16A socket controlled by 16A switch and to locate 2data ports (excluding sockets) with all lead and lifts complete as per s...
SITC of GI 2module back box for data outlets as per site requirement including necessary civil works (To be as per IT team requirement & to be approved by IT team before procurement). with all lead a...
PERFORATED TRAY Slotted angle GI ready made Perforated cable trays of 14SWG. Quoted rates for installation shall include necessary anchor fasteners / L angle supports @ 600mm interval etc., screw...
100mm Wide Tray with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Floor Raceway 200 x 40mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
150 x 40mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
100 x 40mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Ceiling raceway Cost to include customised bends 100 x 60mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Junction Boxes (Floor) 250 x 250 x 50mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
200 x 200 x 50mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
150 x 150 x 50mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Junction Boxes 200 x 200 x 100mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply & Laying of following size 2mm thick rigid FRLS PVC conduits. Rate shall include wall chasing & rough plastering, clamping / fixing arrangement. 25mm dia with all lead and lifts complete as per...
25mm dia with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply & Installation of following size Powder coated raceway / wire way with cover, made out of 16 SWG GI/MS for body and 14 SWG GI/MS for cover.The shade shall be as per site approval 100 x 100mm ...
Supply & Installation of following size Powder coated junction boxes , made out of 16 SWG GI/MS for body and 14 SWG GI/MS for cover. The shade shall be as per site approval 150 x 150 x 65mm Size with...
CABLE TRAYS & RACEWAYS FOR NETWORKING & AV : Floor Raceway includes AV 200 x 40mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
150 x 40mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
100 x 40mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Ceiling raceway with cover INCLUDES AV Cost to include customised bends 150 x 60mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
200 x 100mm Size (BACKBONE) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Junction Boxes (Floor) 250 x 250 x 50mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
200 x 200 x 50mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
200 x 200 x 50mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
150 x 150 x 50mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Junction Boxes (Ceiling) 150 x 150 x 100mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply & Laying of following size 2mm thick rigid FRLS PVC conduits.Rate shall include wall chasing & rough plastering, clamping / fixing arrangement. 32mm dia with all lead and lifts complete as per ...
32mm dia (FLOOR) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply & Installation of following size Powder coated raceway / wire way with cover, made out of 16 SWG GI/MS for body and 14 SWG GI/MS for cover.The shade shall be as per site approval 500 x 100mm ...
Providing and Fixing of Cableoffill wire mesh cable tray system made outof stainless stell wires [316L AS PER NF 10-088-2] and bent into final shape , All cable trays, shall be manufactured with a lon...
EARTHING Supply, installation, testing & commissioning of Maintenance Free Earth pits, eathing system shall be installed as per supplier guidelines /details. Rate shall include necessary civil works. ...
EARTH STRIPS GI/Cu earth strips on cable tray or below ground as per site condition. All Cu. Strips shall be run in PVC heat shrinkable sleeve & mounted on insulation mounts. Cost of civil wor...
25 x 6mm GI Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Busbar of 0.5 Mtr length made out of 25 x 3 mm GI strip with drill holes of M8 at 25mm interval mounted on insulators. The box to be wth glass door cover with all lead and lifts complete as per speci...
Busbar of 0.5 Mtr length made out of 25 x 3 mm Cu. strip with drill holes of M8 at 25mm interval mounted on insul ators. with all lead and lifts complete as per specifications and directions of engine...
Busbar of 0.5 Mtr length made out of 25 x 6 mm Cu. strip with drill holes of M8 at 25mm interval mounted on insulators. with all lead and lifts complete as per specifications and directions of enginee...
PVC Insulated Copper Conductor Unarmoured Cables (YY Type) 1.1kV grade, copper conductor, PVC insulated, unarmoured, power cables. The cables shall be laid on tray / hume pipe /in ready made...
Endterminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
1 Core x 6Sq. mm including Terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
1 Core x 4Sq. mm including Terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
1 Core x 2.5Sq. mm including Terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
MISCELLANEOUS ITEMS RCC Hume pipe ( For road crossing ) of following size 900mm below ground level, including collars & civil works. Rubber mat 1100V grade ISI approved - 2 m x 1m with all lead and...
Shock treatment chart as approved by the Electrical Inspectorate mounted on teak wood frame and suitable for wall mounting. with all lead and lifts complete as per specifications and directions ...
First aid kit with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Danger boards with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Laminated SLD with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Following type Fire extinguisher with mounting hook / bracket and discharge horn. MS Fabricated Items (power coated) (To be used for light and other addiitonal supports) with all lead and lifts comple...
Supply & fixing of rubber gloves of Approved Make & as per supply voltage with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
MS box /angle support of suitable size for suspending the lights below services and to route cable in same for connectivity with necessary accessories. ( Support for fixtures below AC duct) with all ...
Temporary Lighting & Power arrangement with sufficient temporary Lighting ( Min 200Lux Ave. ) & power shall be provided to all agencies during execution with required no. of Indust...
LABOUR PORTION FOR INTERNAL LT WORK: Lighting & Raw Power Distribution board Flexi tier DB Incomer : 1No. 40A, 4P, MCB C curve & Sub incomer 3Nos 40A DP 30mA RCCB Outgoing : 30 Nos. 10A SP MCB of C c...
Emergency lighting 12 WAY SPN DB Incomer : 1Nos 32A DP 30mA RCCB Outgoing : 5 Nos. 10A SP MCB of D curve 5 Nos. 16A SP MCB of D curve with all lead and lifts complete as per specifications and direc...
UDBs : FABRICATED DB Incomer : 1No. 63A TP+2N, MCB 3Nos. 63A DP, MCB (D-Curve) Outgoing : 24 Nos. 20A DP 30mA, RCBO SI - SERIES with all lead and lifts complete as per specifications and directions...
Lighting Circuit: installation of wiring using 3RX2.5 sqmm PVC insulated FRLS wire drawn in 20mm dia 2mm thick PVC conduit as lighting circuit. The circuit main shall be measured in running metre...
Emergency lighting, ELV circuit: Installation of wiring using 3RX1.5 sqmm PVC insulated FRLS wire drawn in 20mm dia 2mm thick PVC conduit being recond from the distribution board to emergenc...
UPS / RP Circuit : Supply & Installation of 3 C x 4 Sqmm FRLS 1100V unarmoured double insulated flexible multicore cable in white and black colour for UPS & RP circuit respectively in existi...
UPS / RP Circuit : Installation of 3 C x 4 Sqmm FRLS 1100V unarmoured double insulated flexible multicore cable in white and black colour for UPS & RP circuit respectively in existing condui...
UPS Circuit - Server/HUB room rack Installation of 3 C x 4 Sqmm FRLS 1100V unarmoured double insulated flexible multicore cable in white and black colour for UPS & RP circuit respectively...
POINT WIRING POINT WIRING - SWITCH CONTROL installation, Testing and Commissioning of point wiring using 3R x 1.5 Sqmm FRLS 1100V wire of approved make drawn in 20mm dia 2mm thick rigid PVC cond...
SECONDARY LIGHT POINT I. Secondary light point means extention of light outlet from existing primary point. Same to be controlled by the existing switch of primary point. II. Ceiling flexible cond...
WITHOUT BOX 1x6A socket controlled by 16A switch - UPS power with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
2x6/16A socket controlled by 16A switch - UPS power with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
1x6/16A universal socket controlled by 16A switch - UPS power with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
1x6/16A universal socket controlled by 16A switch - Raw power with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Hub room Rack Sockets - With Box 1No. 20A 3 pin 1phase Industrial type socket with plug top controlled by 16A DP MCB enclosed in sheet metal box with able to mount on wall / raceway with...
Industrial Sockets (to be IP 55/66) 20A Industrial socket controlled by 20A SP MCB (MCB below as separate control) enclosed in sheet metal box with necessary accessories complete as ...
16A 3pin 1phase Industrial socket with plug top controlled by 16A DP MCB enclosed in sheet metal box with necessary accessories complete as required with all lead and lifts complete as per speci...
32A 5pin 3phase Industrial socket with plug top controlled by 32A FP MCB enclosed in sheet metal box with necessary accessories complete as required with all lead and lifts complete as per spec...
250 x 180 x 75mm readymade floor mounted Junction box to locate 1sets of 3x16A socket controlled by 16A switch and to locate 2data ports (excluding sockets) with all lead and lifts complete as per s...
SITC of GI 2module back box for data outlets as per site requirement including necessary civil works (To be as per IT team requirement & to be approved by IT team before procurement). with all lead a...
PERFORATED TRAY Slotted angle GI ready made Perforated cable trays of 14SWG. Quoted rates for installation shall include necessary anchor fasteners / L angle supports @ 600mm interval etc., screw...
100mm Wide Tray with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Floor Raceway 200 x 40mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
150 x 40mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
100 x 40mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Ceiling raceway Cost to include customised bends 100 x 60mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Junction Boxes (Floor) 250 x 250 x 50mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
200 x 200 x 50mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
150 x 150 x 50mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Junction Boxes 200 x 200 x 100mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply & Laying of following size 2mm thick rigid FRLS PVC conduits. Rate shall include wall chasing & rough plastering, clamping / fixing arrangement. 25mm dia with all lead and lifts complete as per...
25mm dia with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Installation of following size Powder coated raceway / wire way with cover, made out of 16 SWG GI/MS for body and 14 SWG GI/MS for cover.The shade shall be as per site approval 100 x 100mm Size (SER...
Installation of following size Powder coated junction boxes , made out of 16 SWG GI/MS for body and 14 SWG GI/MS for cover. The shade shall be as per site approval 150 x 150 x 65mm Size with all lead...
CABLE TRAYS & RACEWAYS FOR NETWORKING & AV Floor Raceway includes AV 200 x 40mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
150 x 40mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
100 x 40mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Ceiling raceway with cover INCLUDES AV Cost to include customised bends 150 x 60mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
200 x 100mm Size (BACKBONE) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Junction Boxes (Floor) 250 x 250 x 50mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
200 x 200 x 50mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
200 x 200 x 50mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
150 x 150 x 50mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Junction Boxes (Ceiling) 150 x 150 x 100mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply & Laying of following size 2mm thick rigid FRLS PVC conduits.Rate shall include wall chasing & rough plastering, clamping / fixing arrangement. 32mm dia with all lead and lifts complete as per ...
32mm dia (FLOOR) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply & Installation of following size Powder coated raceway / wire way with cover, made out of 16 SWG GI/MS for body and 14 SWG GI/MS for cover.The shade shall be as per site approval 500 x 100mm ...
Providing and Fixing of Cableoffill wire mesh cable tray system made outof stainless stell wires [316L AS PER NF 10-088-2] and bent into final shape , All cable trays, shall be manufactured with a lon...
EARTHING installation, testing & commissioning of Maintenance Free Earth pits, eathing system shall be installed as per supplier guidelines /details. Rate shall include necessary civil works. Model :...
EARTH STRIPS GI/Cu earth strips on cable tray or below ground as per site condition. All Cu. Strips shall be run in PVC heat shrinkable sleeve & mounted on insulation mounts. Cost of civil wor...
25 x 6mm GI Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Busbar of 0.5 Mtr length made out of 25 x 3 mm GI strip with drill holes of M8 at 25mm interval mounted on insulators. The box to be wth glass door cover with all lead and lifts complete as per speci...
Busbar of 0.5 Mtr length made out of 25 x 3 mm Cu. strip with drill holes of M8 at 25mm interval mounted on insul ators. with all lead and lifts complete as per specifications and directions of engine...
Busbar of 0.5 Mtr length made out of 25 x 6 mm Cu. strip with drill holes of M8 at 25mm interval mounted on insulators. with all lead and lifts complete as per specifications and directions of enginee...
PVC Insulated Copper Conductor Unarmoured Cables (YY Type) 1.1kV grade, copper conductor, PVC insulated, unarmoured, power cables. The cables shall be laid on tray / hume pipe /in ready made...
Endterminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
1 Core x 6Sq. mm including Terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
1 Core x 4Sq. mm including Terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
1 Core x 2.5Sq. mm including Terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
MISCELLANEOUS ITEMS RCC Hume pipe ( For road crossing ) of following size 900mm below ground level, including collars & civil works. Rubber mat 1100V grade ISI approved - 2 m x 1m with all lead and...
Shock treatment chart as approved by the Electrical Inspectorate mounted on teak wood frame and suitable for wall mounting. with all lead and lifts complete as per specifications and directions ...
First aid kit with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Danger boards with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Laminated SLD with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Following type Fire extinguisher with mounting hook / bracket and discharge horn. MS Fabricated Items (power coated) (To be used for light and other addiitonal supports) with all lead and lifts comple...
Supply & fixing of rubber gloves of Approved Make & as per supply voltage with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
MS box /angle support of suitable size for suspending the lights below services and to route cable in same for connectivity with necessary accessories. ( Support for fixtures below AC duct) with all ...
Professional Charges: Professional charges towards filing application, preparation of drawings in necessary formats for approval, follow up and arranging approval of drawings, ...
As built drawings: Preparation and Submission of as built drawings of total work executed (5 Sets hard and 5 Sets soft copy) with all lead and lifts complete as per specifications and direction...
Temporary Lighting & Power arrangement with sufficient temporary Lighting ( Min 200Lux Ave. ) & power shall be provided to all agencies during execution with required no. of Indust...
SUPPLY PORTION FOR DG WORKS: 250 KVA DG SET WITH ACOUSTIC ENCLOSURE with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
180 KVA DG SET WITH ACOUSTIC ENCLOSURE with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Engine Mounted ACB enclosures: DG isolator Panel As per SLD with PCC Sync controller shall be mounted on the alternator with necessary supports, anti-vibration connections, mounting brackets, MS stand...
315 A ACB with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Piping for fuel System: Supply, Installation, Testing and Commissioning of Fuel supply system with Class C MS pipes / plates including supports and all accessories as per the following and technical s...
Ball valves 50 mm Dia Ball Valves with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
EXHAUST SYSTEM Supply of Class B MS pipe of 5.5mm thick suitable for DG set cladded with 50mm thick mineral Glass wool insulation covered with 24SWG Aluminium sheet and provided with rain cap as pe...
Silencer Silencer Insulation 50mm thick lightly resin bonded (LRB) rock wool (64 Kg/m3 density) insulation clad with 26 SWG aluminium sheet cladding. with all lead and lifts complete as per specificat...
MS supports Supply of MS steel structure & painting with two coats of primer zinc oxide and two coats of approved enamel paint. All MS supports shall be measured in this line item (DG Stack & DG day t...
CONTROL CABLING 2C X 6 Sq.mm XLPE insulated and armoured copper conductor control cables with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Termination of above Cables using Brass Double Compression glands & Tinned Copper Crimpinglugs with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
4C X 2.5 Sq.mm XLPE insulated armoured copper conductor control cables with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Termination of above Cables using Brass Double Compression glands & Tinned Copper Crimpinglugs with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
24 C X 1.5 Sq.mm XLPE insulated armoured copper conductor control cables with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Termination of above Cables using Brass Double Compression glands & Tinned Copper Crimpinglugs with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
4 C X 2.5 Sq.mm Shielded Flexible copper conductor control cables with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Termination of above Cables using Brass Double Compression glands & Tinned Copper Crimpinglugs with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
LIASIONING WORKS Assisting in Obtaining statutory approval including preparation of necessary drawings and documentation. with all lead and lifts complete as per specifications and directions of engi...
Provide necessary coordination with Electrical contractor, Project Managers, Consultant and Client for providing the drawings, schemes, layout, calculation to obtaining CEIG approval for Nos 1 x 500kV...
LABOUR CHARGES FOR DG WORKS: 250 KVA DG SET WITH ACOUSTIC ENCLOSURE with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
180 KVA DG SET WITH ACOUSTIC ENCLOSURE with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Engine Mounted ACB enclosures: DG isolator Panel As per SLD with PCC Sync controller shall be mounted on the alternator with necessary supports, anti-vibration connections, mounting brackets, MS stand...
315 A ACB with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Piping for fuel System: Supply, Installation, Testing and Commissioning of Fuel supply system with Class C MS pipes / plates including supports and all accessories as per the following and technical s...
Ball valves 50 mm Dia Ball Valves with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
EXHAUST SYSTEM Erection, Testing and Commissioning of Class B MS pipe of 5.5mm thick suitable for DG set cladded with 50mm thick mineral Glass wool insulation covered with 24SWG Aluminium sheet an...
Silencer Silencer Insulation 50mm thick lightly resin bonded (LRB) rock wool (64 Kg/m3 density) insulation clad with 26 SWG aluminium sheet cladding. with all lead and lifts complete as per specificat...
MS supports Fabrication, Commissioning and Erection of MS steel structure & painting with two coats of primer zinc oxide and two coats of approved enamel paint. All MS supports shall be measured in t...
CONTROL CABLING 2C X 6 Sq.mm XLPE insulated and armoured copper conductor control cables with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Termination of above Cables using Brass Double Compression glands & Tinned Copper Crimpinglugs with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
4C X 2.5 Sq.mm XLPE insulated armoured copper conductor control cables with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Termination of above Cables using Brass Double Compression glands & Tinned Copper Crimpinglugs with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
24 C X 1.5 Sq.mm XLPE insulated armoured copper conductor control cables with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Termination of above Cables using Brass Double Compression glands & Tinned Copper Crimpinglugs with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
4 C X 2.5 Sq.mm Shielded Flexible copper conductor control cables with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Termination of above Cables using Brass Double Compression glands & Tinned Copper Crimpinglugs with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
office bid document.pdf
Tender Document • 1.09 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .