Supplying, fitting and fixing of office furniture for additional four floors over the existing (B plus G plus 4) Administrative Building at Nabadiganta Bhawan, GN-20, Sector-V, Bidhannagar, Kolkata -700 091 (Phase-III)

Amount

Supplying,fitting & fixing of office desk.Table made of 25 mm prelaminated particle board with 2 mm PVC edge banding dim of 1500 W x 750 D x 740 H with same quality of Free-standing pedestal with adequate personal storage, Neat Wiring flow with cut-outs on both sides. Complete as per direction of Engineer in charge. Manufacturer should have in house test certificates, Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2019 Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. All ISO Certificates should be NABCB accredited. All the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.

Supplying,fitting & fixing of Visitor / Reading chair. The seat and back are made up of 1.2 cm thick hot pressed plywood, upholstered with fabric and moulded Polyurethane foam with PVC lipping all around. The back foam is designed with contoured lumbar support for extra comfort. The chair is available in four models.BACK SIZE:49.0cm.(W) x 47.0cm.(H).SEAT SIZE:49.0cm.(W) x 44.0cm.(D).The polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 on Hampden machine at 25% compression.The one-piece armrests made of black integral skin polyurethane with 50-70 Shore ‘A’ Hardness and reinforced with M.S. insert. The armrests are scratch and weather resistant. The armrests are fitted to the seat with seat/armrest connecting strip assembly made of 0.5cm. thk. HR steel.The tubular frame is cantilever type & made of Dia.2.54cm.(1”)x 14 BG M.S. E.R.W.tube and black powder coated. Complete as per proposed layout and direction of Engineer in charge. Manufacturer should have in house test certificates, Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2019 Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. All ISO Certificates should be NABCB accredited. All the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.

Supplying,fitting & fixing of Closed Almirah. Dimension : 1981 mm (H) x 916 mm (W) x 486 mm (D). Construction & Material: Welded construction.0.8 mm thk CRCA for Back, Shelf & 0.9 mm thk CRCA for all other components.The steel stortage should be made of prime quality deoxidzed CRCA steel panels 0.6 mm thick & front frame shelf 0.8 mm thick all steel body must be epoxy powder coated to the thickness of 50 microus. Make in India product. Configuration (Door): Full height Steel Hinged Door. Locking & handle : 3 way locking mechanism with shooting bolt arrangement.7 leaver locking arrangement with nickle finished die cast handle. Shelving : Height wise Adjustable Shelf Mounting. Uniformly Distributed Load Capacity per each full shelf is 80 Kg maximum. 4 Nos. of Adjustable Full Shelves. Leveler: There must be a glide screw for leveling purpose. M10 Screw type leveler with hex plastic base. Finish: Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10). Complete as per direction of Engineer in charge. Manufacturer should have in house test certificates, Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2019 Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. All ISO Certificates should be NABCB accredited. All the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.

Supplying,fitting & fixing of made office desk.Table made of 25 mm prelaminated particle board with 2 mm PVC edge banding dim of 1200 W x 600 D x 750 H with same quality of Free-standing pedestal with adequate personal storage, Neat Wiring flow with cut-outs on both sides. Complete as per direction of Engineer in charge. Manufacturer should have in house test certificates, Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2019 Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. All ISO Certificates should be NABCB accredited. All the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.

Supplying,fitting & fixing of Main Mid Back Chiar. Seat : The seat made up of 1.4 ±0.1 cm thickhot pressed plywood upholstered with fabric and moulded polyurethane fome. it has a seat depth adjustment of 5.0±cm integrated in the seat through a sliding mechanism. The Polyurethane foam for seat is of density 55 ± 5 kg/m³. Seat size: 50.0 cm (W) x 49.0 cm(D). Back : The back is injection moulded in glass filled polymide which is upholstered with fabric. The back consist of adjustable lumber support made of injection moulded Polypropylene having an adjustment of 6.0±0.1 cm. Back size : 50.0cm (W)x 68.0 cm (H). Armrest : The three way armrest made of glass filled Polymide arm structure with PU armtop and height adjustment of 7.0±0.5cm. The armtop has swivel and To-Fro movements. The To-Fro movement is 6.0 ± 0.5cm. The inner tube of armrest is crome plated. Mechanism : The mechanism is centre tilt syncro with 360° revolving type. The mechanism is 3 position (including upright lock) giving option of variable tilt angle to the chair with anti shock feature. Make in India product. Height Adjustment : The pneumatic height adjustment is crome plated with an adjustment stroke of 9.0±0.3 cm. Pedestal : The pedestal is High Pressure Die cast polished Aluminum and fitted with 5 nos. twin wheel castors. The pedestal is 65.0±0.5 cm P.C.D. Castors : The twin wheel castors are injection moulded in black glass filled polyamide having 6.0±0.1cm wheel diameter. Complete as per proposed layout and direction of Engineer in charge. Manufacturer should have in house test certificates, Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2019 Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. All ISO Certificates should be NABCB accredited. All the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.

Supplying,fitting & fixing of 3 seater Sofa. Dimension : 2110 (W) x 935 (D) x 890 (H) mm. Primary Material: Solid Wood, Upholstery Material: Fabric. Rigid frame: Metal stiffeners with a powder coating have been added to the frame of the seat, this makes sure that the frame stays intact even after years of usage. Pinewood: Pinewood's natural resistance to molds makes it a hygienic choice, now let your kids play on it without worries. Seating: Layers of thick, dense foam is used to make the seat, they give a comforting feeling that wraps you in an embrace, all the while evenly distributing your weight. Complete as per proposed layout and direction of Engineer in charge. Manufacturer should have in house test certificates, Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2019 Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. All ISO Certificates should be NABCB accredited. All the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.

Supplying,fitting & fixing of 3 seater Sofa. Dimension : 2110 (W) x 935 (D) x 890 (H) mm. Primary Material: Solid Wood, Upholstery Material: Fabric. Rigid frame: Metal stiffeners with a powder coating have been added to the frame of the seat, this makes sure that the frame stays intact even after years of usage. Pinewood: Pinewood's natural resistance to molds makes it a hygienic choice, now let your kids play on it without worries. Seating: Layers of thick, dense foam is used to make the seat, they give a comforting feeling that wraps you in an embrace, all the while evenly distributing your weight. Complete as per proposed layout and direction of Engineer in charge. Manufacturer should have in house test certificates, Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2019 Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. All ISO Certificates should be NABCB accredited. All the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.

Supplying,fitting & fixing of Centre Table. Dimension :590 (W) x 590 (D) x 480 (H) mm. Material: packs a strong punch despite its small size thanks to the strong Rubberwood understructure. Strength should not be a problem with this table. Tabletops need not only to be attractive but also strong. The high-density plywood used in making this table ticks both the boxes. Complete as per proposed layout and direction of Engineer in charge. Manufacturer should have in house test certificates, Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2019 Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. All ISO Certificates should be NABCB accredited. All the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.

Supplying,fitting & fixing of Glass Almirah. Dimension-183.0 cm (H) X 90.0 cm (W) X 45.0 cm (D). Construction & Material: The metirial should be rigit knock down construction. Prime Quality CRCA Steel – 0.8 mm Thick. Sliding Door Arrangement: Full height Sliding Door with top hanging arrangement to prevent derailment.Each door provided with 2 Plastic roller having steel ball bearing for smooth movement of door & less noise. Make in India product. Steel Storage have transfarent door for visibility of the content. Locking & handle : Snap on type aesthetically appealing die cast 5 Lever Cam lock for safe locking. Plastic flush & recessed handle. Shelving : Height wise Adjustable Shelf Mounting. Uniformly Distributed Load Capacity per each full shelf is 80 Kg maximum & for half shelf it is 40 Kg. 4 Nos. of Adjustable Full Shelf.Top option:1 mm for Metal Top. ccessory: Craddle with pipes for hanging Index files. Leveler: Screw type leveler with hex plastic base (add in unit height min.8 mm & additional 5 mm max for (adjustment). There should be gliding serews for height adjustment. Finish:Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10). Complete as per direction of Engineer in charge. Manufacturer should have in house test certificates, Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2019 Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. All ISO Certificates should be NABCB accredited. All the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.

Table Impress: Supplying,fitting & fixing of made Executive Table.Made from MDF and clad with VENEER finished with PU Coating, Main Top Size :1800 W x 900 D x 750 H TOP THICKNESS – 65 mm. MODESTY : Size : 1640 X 600 X16 MM , MDF + Veneer + PU Coating.MOBILE PEDESTAL : MDF + Veneer + PU Coating , Size : 510W x 635H x 445D mm.ERU TOP : MDF + VENEER + PU Coating, Size : 1200 W x 445 D x 660 H TOP THICKNESS – 25 mm. Complete as per proposed layout and direction of Engineer in charge

Supply and placeing of steel storage : 4 Drawer Width: 470mm Height: 1320mm Depth: 620mm.Construction:Rigid Knock Down Construction.Material:CRCA 0.6mm Thickness.Drawer front:Easy to grip Full length Handle recess integrated into Metal Drawer fronts.Drawer Size & Files type:For hanging ‘Ezee’ / ‘Visa’ files (Foolscap) from front to back (Files Along the Width).No. of 20 mm thk file which can be hanged in above way per drawer is 28.Locking & anti-tipping arrangement:Centralized locking with 10 lever Cam Lock & having anti-tipping arrangement to ensure that when one drawer is opened for use, it does not allow other drawers to be opened.Slide:High quality precision ball slide. Tested for 30 kg. UDL for 75,000 cycles (BIFMA cyclic test).Finish:Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10). Complete as per architectural drawing and direction of engineer in charge. Manufacturer should have in house test certificates, Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2019 Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. All ISO Certificates should be NABCB accredited. All the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.

Supply and placeing of libarary reading table :Dimension :900 (W) x 900 (D) x 750 (H) mm. Worktop:25 mm Thick PLB Tops with 2mm Thick PVC Edge Beading.C – Frames:1.6 mm thick M.S Cframe Supporting the Top.Legs:Dia. 38.1 x 1.6 mm thick M.S ERW tube. Complete as per architectural drawing and direction of engineer in charge. Manufacturer should have in house test certificates, Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2019 Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. All ISO Certificates should be NABCB accredited. All the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.

Supplying,fitting & fixing of Centre Table. Dimension :1000 (W) x 600 (D) x 428 (H) . Material: Rubber wood rame with 12 mm glass top and tapered legs. MS sheet at the base, with a laser-cut floral design, can be used as a display shelf. The storage is made of powder coated MS sheet with laser cut floral pattern inscribed on it. Complete as per proposed layout and direction of Engineer in charge. Manufacturer should have in house test certificates, Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2019 Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. All ISO Certificates should be NABCB accredited. All the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.

Supplying,fitting & fixing of Canteen Table. Dimension : 900 x 900 x 750 mm (WxDxH) Complete as per direction of Engineer in charge. Manufacturer should have in house test certificates, Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2019 Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. All ISO Certificates should be NABCB accredited. All the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.

Supplying,fitting & fixing of Canteen Chair. Dimension : 600 x 435 x 780 mm (WxDxH). Materials are built with quality engineered wooden board that has appropriate matte texture and High Gloss surface with trendy patterns inspired from stone and wood grains. Complete as per direction of Engineer in charge. Manufacturer should have in house test certificates, Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2019 Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. All ISO Certificates should be NABCB accredited. All the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.

Supplying,fitting & fixing of made office desk.Table made of 25 mm prelaminated particle board with 2 mm PVC edge banding dim of 1200 W x 600 D x 740 H with same quality of Free-standing pedestal with adequate personal storage, Neat Wiring flow with cut-outs on both sides. Complete as per direction of Engineer in charge. Manufacturer should have in house test certificates, Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2019 Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. All ISO Certificates should be NABCB accredited. All the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.

Suppling, fitting and fixing of Desk with chair. NAMASTE Fronttype: The understructure is made with steel ERW tube section(IS:228) of size 80x40x2.5mm thick with powder coat finish.Understructure consists of two welded leg assemblies connected by means of welded seat side tube assy and welded desk side tube assy on both sides.Sturdy anchoring by anchor bolts on to base of 10mm thk plate for proper resting of structure.Plastic clad & shoe main clad made of glass filled 30% nylon-6 for covering anchor bolts.Side clads:Two side clads made of 35mm thk plt with 2mm thk pvc lipping.Desk side clad made of 18mm thk plt & seat side clad &connecting clad made of 25mm thk plt .Desklet:Desk has opening & closing mechanism by means of desk slider and slider sleeve made of 30% glass filled nylon-6.Desk comprises of plt desk with aluminium section anodized finish on to sides and TPE rubber on to aluminium section outer side for cushioning effect for desk opening closing.Desk made of 18mm thk plt fixed with aluminum extrusion on to sides for desk opening closing.Seat:Seat has self closing mechanism which will operate by means of spring.Seat understructure is a combination of welded fabricated structure made of Ø19X2mmthk ERW tube with powdercoat finsih which is covered by 0.8mm thk sheetmetal cover and uphlosted with moulded foam inside and leatherite cover.Seat back comprises of ply with moulded foam upholosted inside & leatherite cover.Wire carrier:Wire carrier made of 0.8mm thk sheet metal for holding wire passings.Switch box:Switch box made of 1.2mm thk sheet metal for switch plate mounting suitable for anchor roma plates.Front clad Mounting:Front clad mounting made of 18MM thk plt with sheet metal cover and bracket for holding on to top and mounting box for holding of clad with seat side clad. NAMASTE Midtype :- The understructure is made with steel ERW tube section(IS:228) of size 80x40x2.5mm thick with powder coat finish.Understructure consists of two welded leg assemblies connected by means of welded seat side tube assy and welded desk side tube assy on both sides.Sturdy anchoring by anchor bolts on to base of 10mm thk plate for proper resting of structure.Plastic clad & shoe main clad made of glass filled 30% nylon-6 for covering anchor bolts.Side clads:Two side clads made of 35mm thk plt with 2mm thk pvc lipping.Desk side clad made of 18mm thk plt & seat side clad &connecting clad made of 25mm thk plt .Desklet:Desk has opening & closing mechanism by means of desk slider and slider sleeve made of 30% glass filled nylon-6.Desk comprises of plt desk with aluminium section anodized finish on to sides and TPE rubber on to aluminium section outer side for cushioning effect for desk opening closing.Desk made of 18mm thk plt fixed with aluminum extrusion on to sides for desk opening closing.Seat:Seat has self closing mechanism which will operate by means of spring.Seat understructure is a combination of welded fabricated structure made of Ø19X2mmthk ERW tube with powdercoat finsih which is covered by 0.8mm thk sheetmetal cover and uphlosted with moulded foam inside and leatherite cover.Seat back comprises of ply with moulded foam upholosted inside & leatherite cover.Wire carrier:Wire carrier made of 0.8mm thk sheet metal for holding wire passings.Switch box:Switch box made of 1.2mm thk sheet metal for switch plate mounting suitable for anchor roma plates.Front clad Mounting:Front clad mounting made of 18MM thk plt with sheet metal cover and bracket for holding on to top and mounting box for holding of clad with seat side clad. NAMASTE Reartype : The understructure is made with steel ERW tube section(IS:228) of size 1374 (W) x 1080 (D) x 890 (H) mm thick with powder coat finish.Understructure consists of two welded leg assemblies connected by means of welded seat side tube assy and welded desk side tube assy on both sides.Sturdy anchoring by anchor bolts on to base of 10mm thk plate for proper resting of structure.Plastic clad & shoe main clad made of glass filled 30% nylon-6 for covering anchor bolts.Side clads:Two side clads made of 35mm thk plt with 2mm thk pvc lipping.Desk side clad made of 18mm thk plt & seat side clad &connecting clad made of 25mm thk plt .Desklet:Desk has opening & closing mechanism by means of desk slider and slider sleeve made of 30% glass filled nylon-6.Desk comprises of plt desk with aluminium section anodized finish on to sides and TPE rubber on to aluminium section outer side for cushioning effect for desk opening closing.Desk made of 18mm thk plt fixed with aluminum extrusion on to sides for desk opening closing.Seat:Seat has self closing mechanism which will operate by means of spring.Seat understructure is a combination of welded fabricated structure made of Ø19X2mmthk ERW tube with powdercoat finsih which is covered by 0.8mm thk sheetmetal cover and uphlosted with moulded foam inside and leatherite cover.Seat back comprises of ply with moulded foam upholosted inside & leatherite cover.Wire carrier:Wire carrier made of 0.8mm thk sheet metal for holding wire passings.Switch box:Switch box made of 1.2mm thk sheet metal for switch plate mounting suitable for anchor roma plates.Front clad Mounting:Front clad mounting made of 18MM thk plt with sheet metal cover and bracket for holding on to top and mounting box for holding of clad with seat side clad.

DESIGN-M

KOLKATA INTERIORS PRIVATE LIMITED