Repairing and Renovation Work for GODOWN Building At Poshina,Dist.:- Sabarkantha

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

1 Excavation for foundation upto 1.50 mt 334.00 122.99 Cum

depth including sorting out and stacking

of useful materials and disposing the

excavated stuff upto 50 mt lead

(A) Loose or soft soil

2 Filling available excavated earth 1114.00 136.92 Cum

(excluding rock) in trenches. plinth, sides

of foundations etc. in layers not exceeding

20 cm. in depth consolidating each

disposited layer by ramming and watering.

3 Providing and laying cement concrete 112.00 2944.96 Cum

1:4:8 (1 cement : 4 coarse sand : 8 B.T.

Crushed stone aggregates 40 mm.

nominal size) and curing complete excluding

cost of from work in :(a) Foundation and

4 Providing T M T. bar reinforcement of Fe- 17700.00 77.29 Kg.

500D for R.C.C. work including bending

binding and placing in position complete up

to All floor Level

5 Providing and and laying controlled cement 236.00 6505.41 Cum

concrete M250 and curing etc complete

including the cost of form work but excluding

the cost of reinforcement for R.C.C. work for

internal road / floor etc copmlete.

6 Brick work using common burnt clay building 192.00 4495.98 Cum

bricks having crushing strength not less than

35 Kg./Sq.Cm. Above plinth in cement

mortar 1:5 ( 1-cement : 5-fine sand ) (B)

Conventional (For GF)

7 Providing and fixing Safety Grills of required 2000.00 112.72 Kg.

pattern for windows/door using M.S. polished

bars, Rectangular CRC Pipes of size 50mm

x 30mm x 2mm or Required at required

spacing as per design and hold fast with

coach bolts including one coat of primer and

two coats of matt finished oil painting etc.

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

8 Removing and scraping of old deteriorated 126.00 19.92 Sq.Mt

wall and plaster of any thickness fromm wall

/ R.C.C member including stacking of

serviceable material and disposal of

unserviceable from site of work with all lead

9 20 mm. Thick sand faced GUTAKA 1136.00 321.10 Sq.Mt

FINISHED cement plaster on walls upto

mt height above ground level consisting of

12 mm. Thick backing coat of c.m. 1:3 (1

cement : 3 sand) and 8 mm. Thick finishing

coat of c.m. 1:1 (1 cement : 1 sand)

including making groove 6 mm wide and

8 mm deep as approved pattern etc.

complete as directed.

10 Steel work, riveted in built up sections 2.73 5889.50 Q

framed work including cutting, hoisting, fixing

in position and applying a priming coat of red

lead paint. (A) In beams and joists, channels

angles Tees, flats, with connecting plates or

angle cleats as in main and cross beams.

Hip and jack rafters , purlins conneted to

common rafters and the like.

11 Providing and fixing of Ridge flashing for roof 56.00 867.39 Sq.Mt

panel shall be madeout of 0.5 mm thick pre

coated GI sheet . The Precoated sheetshall

be of minimum 240 mpa steel grade

confirming to IS14246:1995 and shall have

zinc coating of minimum 120 gsm asper

IS:277:1992 , 5-7 microns epoxy primer on

both side of thesheet and polyester top coat

15-18 micron. The PPGI Sheet shallhave

plastic protective guard film of minimum

microns toavoid scratches during

transportation. The ridge shall be fixed tothe

steel members by pop rivet or self drilling/self

stitchingfastners @ maximum 450 mm c/c

along length of capping/ flashingetc complet

12 Finishing wall with weather proof exterior 2656.00 73.75 Sq.Mt

emulsion paint on wall surface (two coats)

to give an required shape even shade after

thoroughly brushing the surface to

remove all dirt, and remains of loose

powdered materials etc complete.

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

13 Dismentling barbed wire in fencing including 380.00 68.07 Rmt

making rolls and also including dismentling

fencing posts including all earth work

concrete in base and making good the

disturbed ground stacking useful materials

as directed and disposing as directed and

disposing of the unserviceable materials with

all lead and lift.

14 Providing & fixing Rajor coil wire fencing 380.00 894.86 Rmt

having diameter of 0.75 mt including using of

M.S angle 45x45x6mm as per detail drawing,

fixing in cement concrete M-200 etc

completed with one coat of primer & two

coats of oil paint to M.S angle etc. complete

as directed by engineer in charge.

15 Supplying and erecting Flexible PVC 30.00 58.58 Mtrs.

insulated multi strand multi core 1.1 kv grade

ISI marked copper wires of following size to

be erected as directed. e) 1.50 Sq.mm

core round PVC sheathed

16 Supplying and erecting LED street light / 14.00 4248.06 Nos.

Flood light fittings with High power White

LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more

than 0.95, THD < 10 %, CCT 3000 K to

5700K, Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver

efficiency > 85 %. ( fittings required LM-79 &

LM-80 certificates) (NOTE: Below description

have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may

ranges shown.) (A) Street Light (IP-65),

Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-

voltage protection. (ii) 48 - 59 Watts Cat-III

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

17 providing and erecting Miniature circuit 14.00 297.95 Nos.

breaker single pole 0.5A to 2A system and

having breaking capacity 10 KA to be

erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

18 Providing & erecting 240 V MCB double pole 3.00 362.59 Nos.

switch for lighting Load (B Curve) having

KA breaking capacity & confirms to IS :

in existing box having following capacity (B)

40 Amp. Cat-III

19 Providing & erecting 415 V MCB Four Pole 1.00 811.03 Nos.

for Motor & Inductive Load (C Curve) having

10KA breaking capacity & confirms to IS

:8828 in existing box having following

capacity (C.) for 63 Amp. Cat-III

20 Supplying & erecting earth pit of minimum bore 1.00 4591.46 Nos.

dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia

of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant

ohmic value surrounded by highly conductive

compound with high charge dissipation suitable

for following type of applications with chamber

and heavy duty cover. (A)(approved make OEM

has to submit test certificate including value of

earth resistance of installation duly stamped and

signed by agency and officer Incharge has to

ensure the value of earthing resistane mentioned

in test Certificate) & having back filling compound

of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load &

dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be

capable to retain moisture for long time

Necessary test report must be submitted by

Agency. (a) For Electrical Installation up to 440V

in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

21 Providing , erecting , fabricating the M.S. 40.00 77.77 Kgs.

structure as per requirement on site

incorporating proper size of M.S.

angles,square,round, flats, bars, channels,

sections complete with cutting, welding,

grinding & finishing duly painted with one

coat of red oxide with erection on site as per

direction of engineer in charge with

necessary grouting, cementing, plastering &

finishing complete.

22 Providing and erecting XLPE (IS:7098)(I)-88 435.00 140.39 Mtrs.

ISI armoured cable multistrand / Solid

Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing

trench / pipe of following size of cables (A)

core 4 Sq. mm

23 Making trench in soft soil of suitable width of 284.00 55.55 Mtrs.

90 cm deep for laying cable or locating the

fault all over the run and back filling the

same and making the surface as normal

24 Supplying & erecting approved make SMC 1.00 515.10 Nos.

press moulded composite FRP. loop-in, loop-

out approx. 2mm thick box complete with

Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per

requirement having locking arrangements

with mounting clamp with nuts, bolts &

washers suitable for erection on pole with

cable clamps& earth bolt of following size of

box. (b) 250mm x 200mm x 100mm [deep]

25 Supplying & erecting approved make SMC 14.00 476.72 Nos.

press moulded composite FRP. loop-in, loop-

out approx. 2mm thick box complete with

Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per

requirement having locking arrangements

with mounting clamp with nuts, bolts &

washers suitable for erection on pole with

cable clamps& earth bolt of following size of

box. (C)150mm x 125mm x 100mm [deep]

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

26 Supplying & erecting approved make Digital 1.00 3168.37 Nos.

time switch having lithium cell 6 years

operative and operate battery backup

channel day clock with 14 memory

programme, suitable to operate on 240V +

5%, 16A with, floating contacts Minimum

switching setup time 1 minimum & LCD

display. Also comprised permanent ON/OFF

switching. Programming switches & housed

in fire proof thermoplastic enclosure &

transparent cover erected as required with

necessary connection erected as directed.

27 Supplying & erecting power contactor ,AC3 1.00 2782.55 Nos.

duty for time switch complete erected as per

direction Cat III [D] 4 pole 440V 40 Amp.

Total Rs.

Rupees FiftySix Lakh SeventyFour Thousand One Hundred ThirtyFour and Paisa SixtyTwo Only

I / We am / are willing to carry out the work at ________________________________% above / below

percent (should be written in figure and words) of the estimated rate mentioned above. Amount of my /

our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct_________% Below Add_________% Above

Net Rs.__________________ Net Rs.__________________

In words __________________ In words __________________

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.

G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in

R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned

in all the tender.

5 Dismentalling of Credit materials amounting of Rs. 20000.00 must be recovered from Contractor's

respective R.A. Bill.

Signature of Contractor

Deputy Executive Engineer Executive Engineer

R.& B. Sub Division R.& B. Division

Khedbrahma Himatnagar