695/PR/JUSNL/2025-26

Taking down old door and window shutters including stacking serviceable materials within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Taking downchaukhats in door including stacking serviceable materials within 15M lead and disposal of unserviceable materials with all leads all complete as per direction n of E/I.

Taking downchaukhats in window including stacking serviceable materials within 15M lead and disposal of unserviceable materials with all leads all complete as per direction n of E/I.

Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Dismantling RCC work including stacking serviceble material in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Dismantling of pucca brick or lime work including stacking serviceable materials in countable stacks within 15 m lead and disposal of unserviceable material with all leads all complete job as per direction of E/I.

Extra for cleaning the old surface by scrapping the entire old white wash or olour wash including cost of scaffolding etc. all complete as per direction of E/I.

Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item- A) and disposal of excavated earth as obtained to a distance up to 50M Including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design building specification and direction of E/I.

Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work upto plinth level 1:2:4 (1 cement:2 coarse sand (Zonw-III:4 graded stone aggregate 20 mm nominal size)

Providing designation 75 A Brick work in C.M. (1:4) in Foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 75 A Brick work in C.M. (1:6) in Superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.

Reinforced cement concrete with nominal mix of (1:1.5:3) work in beams, suspended floors, roofs having slope up to 15o landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair case above plinth level upto floor five level, excluding cost of centering, shuttering, finishing and reinforcement.

Providing and laying cement concrete in retaining walls, return walls, work in walls (any thickness), including attached pilasters, buttresses, string or lacing courses, fillets, columns, pillars, piers, abutments, posts, struts, parapets, coping, bed blocks, anchor blocks, plain window sills, sunken floor etc. above plinth level upto floor five level with nominal mix of (1:1.5:3), excluding cost of centering, shuttering, finishing and reinforcement.

Extra for providing and mixing water proofing material in cement concrete work in doses bt weight of cement as per manufacturers specification.

centering and shuttering including strutting propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Lintels, Beams, plinth beams, girders, brussumers and cantilevers

Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 1.5mm cement punning including curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per aaproved pattern and setting in position with cement mortar 1:3, including the cost of required centering, shuttering complete with M200 (1:1.5:3) all complete as per building specification and direction of E/I.

Providing Tor steel reinforcement of 8 mm dia. rods as per approved design and drawing with cutting, bending, and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per specification and direction of E/I. TMT Fe500 (Only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd Bokaro and Vizag (RINL)

Providing Tor steel reinforcement of 10 mm dia. rods as per approved design and drawing with cutting, bending, and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per specification and direction of E/I. TMT Fe500 (Only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd Bokaro and Vizag (RINL)

Supplying , fitting and fixing 20 guage G.C.I. sheet Gate fitted on M.S. Angle frame of size 60x60x6mm, including cost of fabrication providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per specification and direction of E/I. (when steel is not Supplied by the department).

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust freestraight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion, Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Supplying and fitting and fixing M.S. Grill 20x6mm M.S. flat as per approved design and drawing properly fabricated with joints continuous fillet welled & finished smooth Carriage of grill to work site as per building specification and direction of E/I.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm

Providing and fixing ACP sheet 4 mm thick in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .

Providing and laying 6mm precast white glazed tiles in walls over 12mm C.P.(1:3) and joined with gray cement slurry flush pointed with white cement including cost of curing etc.all complete as per building specification and direction of E/I. With "A" grade white/commercial grade 15x15cm tiles

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including preparing the surface after removing rust,dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing twos coat of oil bond distemper of approved shade and make over old surface including washing, cleaning and papering the walls. scaffolding, washing of floors and taxes all complete as per building specification and direction of E/I.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete.The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/5cm. Tear strength in longitudinal and transverse direction as 300/ 250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147 The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick

Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm diameter

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 75 mm diameter

Supplying, materials and labours for constructing inspection chambers of designations class 75 B brick size 750 mmdeep, 600x450 mm internal dimension having 250 mm wall thickness in cement mortar (1:6) including 12 mm cement plaster (1:4) with punning on side and cement plaster (1:6) with 600 x 475 mm G.I cover with frame (Weight not less than 36 kg) along with earth work in excavation and 80 mm thick P.C.C (1:3:6) in foundation and refilling all complete as per specification and direction of E/I.

Supplying fitting and fixing vitreous white glazed earthen ware I.W.C.(510mm long with 12.5 Lt. low level P.V.C. Cistern) of Parry Hindustan or any other ISS approved Make with 100 mm P.V.C. ‘P’ trap complete with all fittings, 32 mm alkathene/ PVC telescopic flush pipe with one brass coupling and clamps including supplying and fixing a pair of vitreous white glazed earthenware foot rest to be fixed in floor,15mm C.I.body brass spindle stopcock of weight not less than 350gms,15mm P.V.C. connection pipe 450mm long etc. all complete as per building specification and direction of E/I.

Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry Hindustan or any other ISS approved make supported on painted C.I. or C.C. brackets 32mm C.I. brass waste, 15 mm C.I. body brass spindle stop cock of approved quality weight not less than 350 gms, 32 mm P.V.C. waste pipe 750 mm long with brass coupling at one end and doing plumber joints including painting pipe with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.

Supplying fitting and fixing vitreous white glazed earthen ware 600x 350 mm size urinal of parry Hindustan or any other ISS approved squating C.I. automatic flusing cistern of Reliance or any other approved make with fittings R.S. or C.I. brackets, 32mm P.V.C. waste pipe 750 mm long with brass coupling at one end and doing plumber joints including painting pipe with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.

Providing and Fixing 100 mm/75 mm P.V.C. fittings of supreme or equivalent make etc.all comlete as per specification and direction of E/I. 110 mm dia. Cowel

110 mm dia. PVC plain Bend

75 mm dia PVC plain bend

110 mm dia. PVC Tee with door

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25 mm dia. (Exposed on wall)

20 mm dia. (Conceled)

Providing and fixing male ended 15 mm dia. Brass bib cock of approved quality (wt. not less than 350 gms) with extra soacket all complete as per specification and direction of E/I.

Providing and fixing gun metal full way valve of approved quality, all complete as per specification and direction of E/I. 20 mm dia weight not less rhan 400 gms

Supplying, fitting & fixing liter polythene water storage tank of I.S.I mark like Sintex/ Himgiri, gyatri or equivalent of approved make with cover and locking and placing in position at all height places and making holes for inlet, outlet & drain out pipe as per direction of E/I.

Providing labour for shifting of material etc. as per direction of E/I.

Carriage of materials Cement (10 Km)

Coarse sand(32 Km)(2 Km Kutcha+30 Km surface)

Stone chips (35 Km)(1 Km Kutcha+34 Km Surface)

Bricks(2 Km Kutcha+18 Km Surface)

Steel (10 Km)

Total

Total

Labour Cess @1%

(Note:- The rate quoted by the bidder in % above, % below will be considered against each item of work from Sl. No. 1 to 20.5 )

Please Enable Macros to View BoQ information