Loading…
Loading…
Tender Value
₹30 L
EMD Value
₹30,000
Closing Date
29 Jun 2026, 7:00 pm3d left
Similar tender results from the same govt authority in the past 3 years.
Assistant Manager (South West Zone)
Regarding the repairing work as per the requirement in various municipal building, muni. school, aaganwadi, gardens,pay & use in vejalpur ward of south west zone.(Re-Invite)
317378
5 of 2026-27
Open
Miscellaneous Works
Ahmedabad
3 documents required · 3 mandatory
₹1,500
Municipal Commissioner, Ahmedabad
₹30,000
25 Jun 2026
25 Jun 2026
25 Jun 2026
29 Jun 2026
25 Jun 2026
Name of Work:- Regarding the repairing work as per the requirement in various municipal
building,muni.school,aaganwadi,gardens,pay & use in vejalpur ward of south west zone
Sr.No Oty. Item Description Rate Unit Amt.Rs.
Excavation for foundation up to1.5 m depth including sorting
out and stacking of useful materials and disposing of
theexcavated stuff upto 50 Meter lead.(A) Loose or soft
soil (R & B S.O.R 2023-24 I.no. Item Code 04001A)
2.8608 Upto 1.5 mt Depth 115.92 Cmt
1 1.5 to 3.0 mt.depth 158.4 Cmt
Filling available excavated earth (excluding rock) in
trenches, plinth, sides of foundations etc. in layers not
exceeding 20 cm. in depth consolidation each deposited
2 10 layer by ramming and watering. 129.10 Cmt
Providing and laying cement concrete1:5:10 (1-
Cement: 5- coarses sand and:10-hand broken stone
aggregates 40mm nominal size) and curing
complete excluding cost of formworkin (A) Foundation and
Providing and laying cement concrete1:4:8 (1-
Cement: 4- coarses and:8-hand broken stone
aggregates 40mm nominal size) and curing complete
4 2 excluding cost of formworkin (A) Foundation and Plinth 2653.67 Cmt
Providing and laying cement concrete 1:3:6 (1-Cement : 3-
coarse sand : 6- hand broken stone aggregates
mmnominal size) and curing complete excluding cost of
5 2 formwork in (A) Foundation and Plinth 2976 Cmt
Providing and laying cement concrete 1:3:6 (1-
Cement:3-coarse sand:6-crushed stone aggregates
20mm nominal size) and curing complete including cost of
6 2 formwork in (A) wall caps/coping 4006.15 Cmt
Providing and laying cement concrete work 1:2:4 ((1-
Cement:2- coarse sand:4-graded aggregates 20mm
nominal size) curing complete excluding cost of
7 1 formwork and reinforcement.
Foundations, footings, base or columns and mass
a 2 concrete 3923.53 Cmt
Slabs, landing, shelves, balconies, lintels, beams,
b 2 girders and cantilivers upto floor two level 4012.47 Cmt
c 1 Independent piers, columns, and pillars, upto floor two level 3661.3 Cmt
Provdg. & laying cement concrete 1:2:4 (1 cement :
coarse sand : 4 graded stone aggregates 20 mm nominal
size) for reinforced concrete chhajjas not exceeding
10 cm. thickness upto floors two level including
finishing the exposed surfaces with cement mortar
1:3 (1 cement : 3 find sand) to give a smooth and even
surface centering and form work and curing complete
excluding cost of reinforcement.
Providing and laying controlled cement concrete /
Ready Mix Concrete of M-200 and curing complete,
excluding the cost of form work and reinforcement for
9 0 reinforced concrete work in:
Foundations, footings, base of columns, and mass
(A) 1 concrete. 3977.88 Cu.M.
Walls from top of foundations /level up to floor Two level.
Slabs,landing,shelves,Balconies Lintels, Beams, Girders and
(C) 1 Cantilever upto floor 4460.36 Cu.M.
Columns, pillars, posts, and struts, up to floor two level.
Staircase up to floor two level. (excluding landing)
Vertical and horizontal fins up to floor two level.
Providing and Laying ordinary cement concrete 1:2:4
(1-Cement 2-coarsesand: 4-graded stone aggregates
mm nominal size) and finishing smooth with curing etc.
complete including the cost of form work but excluding the
cost of reinforsement for R.C.C work in (iv) Slabs having
more than 13 cm and upto 15 cm.thickness
Providing and Laying ordinary cement concrete 1:2:4
(1-Cement 2-coarsesand: 4-graded stone aggregates
mm nominal size) and finishing smooth with curing etc.
complete including the cost of form work but excluding the
cost of reinforsement for R.C.C work in (iv) Slabs having
more than 8 cm and upto 10 cm.thickness
Brick work using common burnt clay building bricks
having crushing strength not less than 35kg./Sq.Cm.in
foundation and plinth in Cement Mortar1:6 (1-Cement
12 0 :6 - fine sand)
1 (A) Conventional (upto 10 ton) 3981.21 Cmt
1 B) Modular 4241.7 Cmt
Extra Rate for brickwork in Above Item for super
structure above plinth level upto floor two level (B)
13 0 Conventional
a 1 (A) Conventional 272.25 Cmt
b 1 B) Modular 262.35 Cmt
C) above floor two level Item No. 2(6.13) (A) Modular
D) above floor two level Item No. 2(6.13) (B) Conventional
Half brick masonry in common brunt clay building bricks
having crushing strength not less than 35 Kg/Sq.Cm. in
Cement mortar 1:5 ( 1-Cement : 5 coarse sand ) in
14 5 foundation and Plinth conventional brickwork 583.49 Smt
Extra for half brick masonry in super structure above
15 5 plinth level upto floor two level (B) conventional 433.4 Smt
Providing form work in ordinary timber planking so as
to give a rough finish including centering, shuttering,
strutting and propping etc. height of propping and
centering below supporting floor to celling not exceeding
M & removal of the same for in situ reinforced or plain
concrete work upto floor four level
Foundation, footings, bases of columns etc. and mass
a 5 concrete. 171.68 Smt
(B) Flat surfaces such as soffits of supspened floors slabs
Landings and the like. (1) Floors etc. upto 200 mm in
b 5 thickness. 252 Smt
(B) Flat surfaces such as soffits of suspended floor roof slabs
Landings and the like. (2) Floors etc. above 200mm in
c 5 thickness. 270.9 Smt
Vertical surface such as walls (any thickness) partitions and
the like including attached buttresses & string course & the
d 5 like. 229.95 Smt
(ii) Sides And Soffits Of Beam, Haunchings Cantilevers,
Girders, Bressumers And Lintels Not Exceeding 1 M In
e 5 Depth. 192.15 Smt
(G) Columns PillarsPosts and struts. (1) Square Rectangular
f 5 Polygonal in plan. 297.68 Smt
g 5 (2) Circular or curved in plan. 422.1 Smt
(H) (2) Sides and soffits of Beams Beam Haunchings canti-
levers Girders Bressumers and Lintels exceeding 1M.in Depth.
Providing and fixing 35 mm thick panelled, glazed or
panelled and glazed shutters for Doors windows and clear
story windows including anodised alluminium But hinges
17 0 with necessary screws and indian teak wood shutters with.
a 5 (A) Plywood sheet panels. 3459.09 Smt
b 5 (B) Particle board panels 3464.51 Smt
c 2 (C)Hard board panels. 3433.65 Smt
d 2 (D) Asbestos sheet panels. 3406.53 Smt
Providing and fixing 25 mm thick shutters for cup
boards etc. including black enamelled M.S. butt hinges
with necessary screws.(A) Indian teak wood. (i) Fully
18 2 Panelled. 3006.75 Smt
Providing and fixing 25 mm thick shutters for cupboards etc.
including anodised alluminiu butt hinges with necessary
a 2 screws. (A) Indian teak wood. (ii) Fully Glazed. 3006.75 Smt
Providing and fixing 25 mm thick shutters for cupboards etc.
including anodised alluminiu butt hinges with necessary
screws. (A) Indian teak wood. (ii) Partly panelled and partl
b 2 glazed. 2814.42 Smt
Providing and fixing M.S. grills of required pattern to
wooden frames of windows etc. with M.S. flats at required
spacings and frame alround, square or round bars with
19 5 round headed bolts and nuts or by screws (A) Plain Grill. 100.17 kg
Providing and fixing glazed louvered glass
windows and ventilators with teak wood frame 10 cm. x
7 cm. size including 3 coats of oil painting to wood work
20 1 etc.complete. 4102.54 Smt
Providing and fixing glazed louvered glass
windows and ventilators with teak wood frame 10 cm.x7
cm. size including 3 coats of oil painting to wood work
21 1 etc.complete.with wooden louvers plank 12mm thick 4332.47 Smt
Providing and fixing 35 mm thick shutters for Doors,
windows and clere story windows including Indian teak
wood frames 10 cm x 7 cm. size including anodized
alluminium fixtures and fastenings including primer coat of
approved quality and two coats of oil painting etc, complete.(ii)
Providing and fixing 35 mm thick shutters for Doors,
windows and clere story windows including Indian teak
wood frames 10 cm x 7 cm. size including black enamelled
iron oxidixed fixtures and fastenings including
primer coat of approved quality and two coats of oil painting
etc, complete.(ii) Fully Panelled.
Providing and fixing 35 mm thick shutters for Doors, windows
and clerestory windows including Indian teak wood frames
cm x 7 cm. size including anodized alluminium fixtures and
fastenings including primer coat of approved quality and two
coats of oil painting etc, complete. (iii) Partly panelled and
Providing and fixing 30 mm thick FACTORY MADE
SOLID PANEL PVC DOOR SHUTTER consisting of frame
made out of M.S.tubes of 19 gauge thickness and size of
mm x 19 mm for stiles and 15 mm x 15 mm for top and bottom
rails.M.S. frames hall have a coat of steel primers of
approved make and manufacture, M.S. frames hall be
covered with 5 mm thick heat moulded PVC ‘C’ channel
of size 30 x 50 mm formings tiles, and 5 mm thick 75 mm
wide PVC sheets for to prail, lock rail and bottom rail on either
side, and 10 mm (5 mm x 2) thick, 20 mm wide cross PVC
sheet as gap insert for top rail and bottom rail, Panelling of
5 stiles and rails with 30 mm wide x 5 mm thick PVC
sheet beading on eighter side, and joined together with
solventcement adhesive,. An additional 5 mm thick PVC strip
of 20 mm width is to be stculkon the interiors side of the
‘c’ channel using PVC solvent cement adhesive
etc. complete as per direction of Engineer incharge,
manufacture’s specification and drawing.
Providing and fixing in position collapsible steel
shutters with vertical channels 20 x 10 x 2 mm braced
with flat iron diagonal 20 x 5 mm size with top and bottom
rails T iron 40 x 40 x 6 mm with 38 mm dia steel pulleys
complete with bolts, nuts, locking arrangements, stoppers,
handles, including a priming coat of red lead paint &
Providing and fixing 1 mm thick M.S. sheet sliding
shutters with frame and diagonal braces of 40x40x6
mm angle iron, 3.15 mm M.S.gusset plates at Junctions and
corners 25 mm dia. pulley, 40x40x6 mm angle
and T-iron guide rail at top and bottom respactively
with handles, stoppers and locking agangement etc,
including applying a priming coat of red lead paint.
Providing & Fixing in position Alluminium doors with frame
using approved quality anodised extruded alluminium
section as approved by Engg.in charge(Jindal
alluminium) (a) Frame sections 101.6x44.45 mm (b) Shutter
bottom vertical & top section 83.5x44.45 (wt.1.31 kg/mt.)(at
1.31 kg/mt) (c) Shutter bottom section at 114.3x44.45
mm at (1.37kg/mt) Shutter middle section at 100x44.3
wt.(1.37 kg/mt) incl.providing & installing 5 mm thick
approved color Acrylic sheet of standard quality fixed
with glazing chips on upper pannel & Laminated sheet on
lower pannel (wtt.0.13 kg/Rmt) etc.comp.as direction
of engg.in charge.(N.S.)
Providing and fixing extruded aluminum window having
extruded aluminum Colour r Powder Coated section frame
main outer size 127mm x 38.10mm x 1.35mm ,@ Wt.1.384
Kg/mt,horizontal Four track member size 122.20mm x
31.75mm x 1.10mm @ Wt. 1.205 Kg/mt,vertical member of
size 122.20mm x 31.75mm x 1.50mm ,@ Wt. 1.398 Kg/mt
with sliding shutters of horizontal member size 40mm x 18mm
x 1.29mm @ wt.of 0.456Kg/mt,vertical member of size 40mm
x 18mm x 1.29mm @ wt.of 0.456Kg/mt,@ with 5 mm thick
transparent bronze colour tinted float glass with powder
coated aluminum fittings and fixtures and transparent silicon
sealant glass fixing to frame as per details etc complete for
Providing & Fixing in position Alluminium vents with
frame using approved anodised extruded alluminium
section as approved by Engg. In charge.(Jindal
alluminium) units equivalent Approved Rate)Frame section
of 63.50 x 38.50 mm. (wt. 0.68Kg/Rmt) incl. Providing &
Installing 5 mmthick approved color Acrylic sheet of
standard quality etc. comp. Sq.
Providing and fixing standared extruded of alluminium
section of size 63 mmx38.10 mmx1.2 mm (Jindal
Section:2434, or equivalent @ Wt.0.643 Kg/mt) with
colour anodized alluminium frame for ventilation with
mm thick frosted glass as details etc complete for
Ventilation Sq.
Providing and fixing standared extruded of alluminium section
of size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg / Rmt with
colour Powder Coated alluminium frame with 5 mm thick
transparent bronze colour tinted float glass as details etc
complete for Fix Partition
Providing and laying 40 mm thick marble chips flooring
rubbed and polished (I.E.terrazo) to granolithic finish with
under layer 30 mm thick cement concrete1:2:4 (1-Cement: 2-
coarse sand: 4-graded stone aggregate 10 mm and
down gauge) and to player 10 mm thick with white, black or
white and blak marble cihps of required sizes from 1 mm to
mm nominal size laid in cement marble powder mix 3:1 (3-
Cement:1-Marble powder by weight) in proportion
of 4:7 (4- Cement: 7-marble chips by volume) (C)
Medium Shade pigment with approx 50% white cement
and 50% ordinary cement (In top layer only) (upto 10 ton)
Providing and laying marble chips skirting (Terrazo) or
dedo rubbed, and polished to Granolithic finish to player
mm white, black or white and black marble chips of
size from smallest to 4 mm nominal size laid in cement
marble powder mix 3:1 (3-Cement: 1 marble powder
by weight) in proportion of 4:7 (4-cement marble powder mix:
7-marble chips by volume) (B) Light shade pigment with white
cement (In top layer only)
Providing and laying white glazed tiles 6mm thick in flooring
treads of steps and landing laid on a bed of 12mm thick
cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with
34 5 flush 908.17 Sq.M.
Providing and laying Ceramic tiles 6 mm thick in flooring
treads of steps and landing laid on a bed of 12 mm thick
cement mortar 1:3 (1- cement :3-coarses and) finishing with
35 5 flush pointing in white cement. 960.47 Sq.M.
Providing & Fixing 20 mm thick Mirror Polished Decorative
Granite Board with Computerised Golden Letters
Discription as per instructions of engg. in charge to
M.S. frame structure for Inaugaration & Public
Handover Function (N.S.)
Providing and laying Vitrified tiles 8 to 10 mm thick, 36''x36'' in
flooring treads of steps and landing laid on a bed of
mm thick cement mortar 1:3 (1-cement:3-coarses and)
37 2 finishing with flush pointing inwhite cement. 1469.91 Sq.M.
Providing and laying Vitrified tiles 8 to 10 mm thick, 24''x24'' in
skrting risers of steps and dedo on 10 mm thick cement
plaster 1:3 (1- cement: 3-coarse sand) and jointed
38 2 with white cement slurry 1130.15 Sqm
Providing and laying Vitrified tiles 8 to 10 mm thick, in skrting
risers of steps and dedo on 10 mm thick cement plaster
1:3 (1-cement:3- coarse sand) and jointed with white
39 2 cement slurry 1523.61 Sqm
Providing and laying 24" x 24" vitrified Tiles 8 to
mm th. Double Charged gloosy/ Matt of Approved make
as approved by Adl.C.E. / consultants in flooring over
mm thick cement mortar 1:6 (1 cement : 6 coarse
sand)on new surface& jointed with colour cement slurry
incl with flush pointing & cleaning the surface etc. comp.
Providing and laying 24" x 24" vitrified 8 to 10 mm
th.Double Charged Gloosy / Matt tiles of Approved
make as Approved by Adl.C.E. / Consultants for upto
cm high skirting as approved by Engineer in charge over
10 mm thick cement mortar 1:6 (1 cement : 6 coarse
sand)on new surface& jointed with colour cement slurry
incl with flush pointing & cleaning the surface etc. comp.
Providing and laying polished Kota stone slab flooring over
20 mm (Average) thick base of cement mortar 1:6 (1-
cement:6-coarses and) or L.M.1.1.5 (1-Lime
putty:1.5-coarses and) laid over and jointed with grey
cement slurry mixed with pigment to match the shade of
slab including rubbing and polishing etc. complete. (A)
Providing and laying marble stone slab flooring over 20mm
(average)base of cement mortar 1:6 (1-cement : 6 coarse
sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and
jointed with gray cement slurry including rubbing and polishing
complete. (A) Marble slab 25mm thick
Providing and laying polished Kota stone slab flooring over
20 mm (Average) thick base of cement mortar 1:6 (1-
cement:6-coarses and) or L.M.1.1.5 laid over and jointed
with grey cement slurry including rubbing and polishing
etc.complete. (B) 30 mm thick
Providing and laying polished kota stone slab 25 mm thick in
risers of steps, skirting Dedo and pillars laid on 10 mm thick
cement mortar 1:3 (1-Cement :3 coarses and) and jointed
with gray cement slury mixed with pigment to match the
shade of slab including rubbing and polishing
Providing and laying cement concrete flooring 1:2:4
(1-cement: 2-coarses and:4-graded stone aggregate
20mm nominal size) laid in one layer and finished with a
46 1 floating coat of neat cement. (A) 40mm thick. 297.68 Sq.M.
Providing and laying cement concrete flooring 1:2:4
(1-cement: 2-coarse sand:4-graded stone aggregate
20mm nominal size) laid in one layer and finished with a
47 1 floating coat of neat cement. (B) 50mm thick. 348.08 Sq.M.
Providing and laying broken china mosaic flooring for
terrace using 12 mm to 20 mm broken pieces of glazed tiles
to be laid over cement mortar 1:3 to plain or slope and to be
tempered to bring mortar creme out upto surface using
white cement including rounding off junctions and
extending them up to15 cm along the wall, clearing with
water and oxalic acid etc.as directed.
Providing and laying coloured glazed tiles of the
size 300 mmx200 mmx8 mm/300 mmx450 mmx8 mm in
skirting, risers of steps and dedo on 10 mm. thick
cement plaster 1:3 (1cement: 3 coarse sand) & jointed
with white cement slurry.
Providing ridges or hips 600 mm overall in plain G.I.
sheet class-3 fixed with G.I. J or L Hooks and nuts
mm dia G.I. Limpet and bitumen washer complete. (1)
50 1 mm thick sheet. 635.58 Sqm
Providing and fixing 150 mm wide 450 mm over all semi
circular plain G.I.sheet class-3 gutter with Iron brackets
mmx3 mm size Bolts, Nuts, washers etc. including
making necessary connection with rain water pipes. (i)
mm thick Sheet.
Providing and fixing five courses water profing
treatment with bitumen felt consisting of second and
fourth course of blown/ bitumen or/and residual
bitumen applied hot at 1.2 kg.per Sq.M.of area for each
course and first course with fibre base bitunen
saturated under lay type land third course with fibre base self
finished felt type 2 grade 1 and fifth and final course of
stone grit 6 mm and down size or pea sizes gravel
spread at 0.008 Cu.Metre/Sq.metre
preparation of surface excluding grading complete.
Providing and fixing on wall face C.I. Rain water pipe
including filling the joints with spun yarn soaked in neat
cement slurry and cement mortar 1:2(1- Cement : 2-
53 1 fine sand) (A) 75 mm dia. 283.62 Rmt
Providing 15 mm thick cement plaster in single coat on
Rough (Similar) side of single or half brick walls for interior
plastering up to floor two level and finished even and
54 1 smooth in (i) Cement mortar 1:3 (1-cement :3-sand) 174.83 Sqm
Providing 20mm thick sand faced cement plaster on walls upto
height 10 metres above ground level consisting of 12mm thick
backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick
finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.
Colour washing with lime on wall surface (two coats)
over and including a primary coat of white washing to
give an even shade after through brooming the surface to
remove all dirt, dust, mortar drops and other foreigh
Removing dry or oil bound distemper by a
washing and scraping and sand papering the wall
surface smooth including necessary repairs to
57 1 scratches complete. 11.19 Sqm
Distempering with dry distemper of approved brand and
manufacture (two coats) and of required shade on wall
surfaces of given an even shade, over and including
a priming coat of whiting after thoroughly brooming
the surface free from mortar dropping and other foreign
Distempeing (Two coats) with oil bound distemper of
approved brand and manufacture and of required shade
on wall surfaces to give an even shade, over and
including a priming coat with distemper primer of
approved brand and manufacture after thoroughly
brushing the surface free from mortar dropping and
other foreign matter and also including preparing the
surface even and sand papered smooth.
Extra Coat for Above Item over above for every
60 5 subsequent coat of approved brand and manufacture. 30.09 Sqm
Wall painting (two coats) with plastic emulsion paint of
approved brand and manufacture on undecorated
wall surface to give an even shade including throughly
brushing the surface free from mortar droppings and
other foreign matter and sand papered smooth.
Extra over item for every sub sequent coat of wall
62 5 painting with plastic emulsion paint of approved brand 33.39 Sqm
Extra over item for painting with plastic emulsion paint of
62 a 5 approved brand on ceilings and sloping roofs. 5.36 smt
Applying priming coat over new steel and other metel
surface after and including preparing the surface by
throughly cleaning, oil, grease, dirt and other foreign
matter and scoured with brushes fine steel wood, scrapers
and sand paper with ready mixed priming paint brushing
Painting two coats (excluding priming coat) on new
steel and other metal surface with enamel paint, brushing,
interior to give an even shade including cleaning the surface
an even shade including cleaning the surface of all dirt, dust
and other foreign matter.
Painting one coats (excluding priming coat) on
previously painted steel and other metal surface with enamel
paint, brushing to give an even shade including cleaning
65 1 the surface of all dirt, dust and other foreign matter. 54.35 Sqm
66 5 Extra over item for every sub sequent coat of paint. 50.4 Sqm
Painting two coats (excluding priming coat) on new
steel and other metal surface with synthetic enamel paint,
brushing to give an even shade including cleaning the
67 5 surfaceofalldirt,dust and other foreign matter. 64.66 Sqm
Painting one coats (excluding priming coat) on
previously printed steel and other metal surface with synthetic
enamel paint, brushing to give an even shade including
cleaning the surface of all dirt, dust and other foreign matter.
Extra over Above item for every sub sequent coat of paint.
Painting two coats (excluding priming coat) on external
surface of new rain water, soil, waste and vent pipes and
fittings with ready mixed bituminous brushing, black, anti
corrosive to give an even shade including cleaning of all
dirt, dustand other foreign matter.(75 mm dia)
Painting two coats (excluding priming coat) on external
surface of new rain water, soil, waste and vent pipes and
fittings with ready mixed bituminous brushing, black, anti
corrosive to give an even shade including cleaning of all
dirt, dust and other foreign matter.(100 mm dia)
Painting two coats (excluding priming coat) on new
wood and wood based surface with enamel paint, interior
to give an even shade including cleaning the
surface of all dirt, dust and other foreign matter sand
papering and stopping. (a) Ready mixed paint brushing wood
Painting one coats (excluding priming coat) on
previously painted wood and wood based surface with
enamel paint, to give an even shade including cleaning the of
all dirt, dust and other foreign matter.(b) Ready mixed
paintbrushing priming for enamel
Extra over Above item for every sub sequent coat of paint.
Painting two coats (excluding priming coat) on new
wood and wood based surface with ready mixed paint,
brushing, oil, gloss, semi gloss to give and even shade
including cleaning of all dust, dirt and other foreign
matters and papering and stopping.
Finishing wall with weather proof exterior emulsion paint
on wall surface (two coats) to give an required shape
even shade after thoroughly brushing the surface to remove
all dirt, and remains of loose powdered
materials.etc complete
Applying two coats of Birla (white cement based) or
Asian (acryliclapy-putty) or equivalent & two coats of
primer of approved brand and manufacture on new wall
surface to give an even shade including thoroughly brushing
the surface free from mortar dropping and other foreign
matter and sand papered smooth.
Painting one coats (excluding priming coat) on previously
painted wood and wood based surface with enamel paint, to
give an even shade including
cleaning the of all dirt, dust and other foreign matter.
Writing letter or figures on any surface with black
japan paint (stops, comas, hyphens and the like not to
be measured and paid for separately) (i) Block
(Letters/Figures) (Per 10 Letter pet CM.HT)
Demolition including stacking of serviceable materilas and
disposal of unserviceable materials with all lead and lift. (i)
80 5 R.C.C. work 1047.38 Cu.M.
Demolition of Brick work and stone masonry including
stacking of serviceable materil as and disposalof
unserviceable materials with all lead and lift.(ii) In Cement
81 5 Mortar. 544.95 Cu.M.
Dismentaling tiled of stone floors laid in mortar including
stacking of serviceable materil as and disposal of
82 5 unserviceable materials with all lead and lift. 47.25 Sqm
Dismentaling of sheet roofing including ridges, Hips,
Valleys, Gutters etc. stacking of serviceable materil as
and disposal of unserviceable materials with all lead
83 1 and lift.(i) G.I.sheet roofing. 47.25 Sqm
Dismentling steel work including distempering and
84 51 stacking the materials with all lead and lift. 2.42 Kg.
Dismentling doors, windows, ventilators etc. (wood
or steel) shutters including chowkhats architraves,
hold fasts and other attachment etc. complete and
stacking the material within all lead and lift.(i) Not exceeding
Dismentling doors, windows, ventilators etc. (wood
or steel) shutters including chowkhats architraves,hold
fasts and other attachment etc. complete and stacking
the material with in all lead and lift.(ii) Exceeding 3 Sq.M.in
Dismentling barbed wire in fencing including making rolls
and also including dismentling fencing posts including all
earth work concrete in base and making good the
disturbed ground stacking useful materials as directed
and disposing as directed and disposing of the
unserviceable materials with all lead and lift.
Dismentling C.I. pipes G.S.W. pipes abd A.C. rain
water pipes with fittings and clamps including stacking the
88 30 materials with all lead and lift (for any dia, of pipe) 74.03 Rmt
Dismantling santtary fittings like wash basin . W.C. pan
Indian and Europe an type, flushing tank etc. including
89 30 stacking the materials with all lead and lift 401.63 Each
Scraping oil paint from steel and other metal surface and
90 30 making the surface even (with Hand Scraping.) 48.83 Smt
Removing and scraping of old deteriorated plaster
of any thickness from wall / R.C.C member
including stacking of serviceable material and disposal of
91 5 unserviceable from site of work with all lead and lift 19.38 Smt
Providing and fixing M.S. fan clamps of shape and
size as specified in existing R.C.C. slab including cutting
92 5 chase and making good. 168.53 Each
Cutting out cracks of roof terrace to V-section, cleaning out,
wetting, grouting with cement and sand slurry 1:3 (1-
93 5 cement 3-sand ) 64.58 Rmt
Cutting out cracks roof terrace to V-Section cleaning out
and filling solidly with a hot mixture of bitumen and
94 5 clean dry sand (1:1 by weight) 75.29 Rmt
Providing & Fixing in position Alluminium doors with
frame using approved quality anodised extruded
alluminium section as approved by Engg.in charge(Jindal
alluminium)(a) Frame sections 101.6x44.45 mm (b)
Shutter bottom vertical & top section 83.5x44.45
(wt.1.31 kg/mt.)(at 1.31 kg/mt) (c) Shutter bottom section at
114.3x44.45 mm at (1.37 kg/mt) Shutter middle section at
100x44.3 wt.(1.37 kg/mt) incl.providing & installing
mm thick approved color Acrylic sheet of standard
quality fixed with glazing chips on upper pannel &
Laminated sheet on lower pannel (wtt.0.13 kg/Rmt)
etc.comp.as direction of engg.in charge.(N.S.) Sq.
Providing & Fixing in position Fully Panelled / Partly
Panelled Partly Glazed / Fully Glazed Alluminium doors
with frame using approved quality anodised
extruded alluminium section as approved by Engg. In
charge.(Jindal alluminium )(a) Frame sections 101.6x44.45
mm b) Shutter vertical & top section 83.5x44.45
(wt. 1.31 kg/mt.)( at 1.31 kg/mt) © Shutter bottom section
at 114.3 x44.45mm at ( 1.37 kg/mt ) Shutter middle
section at 100x44.3 wt. (1.37 kg/mt ) incl. providing &
installing 5 mm thick Glass of standaed quality fixed /
12 mm thick Laminated sheet with glazing chips (wt.
kg/ Rmt) in panels etc. comp. as per Detail Given &
direction of engg.in charge.
Providing & Fixing in position Alluminium window
2/3/4 track sliding / fix type with frame using approved
anodised extruded alluminium section as approved by Engg.
In charge.(Jindal alluminium) units equivalent.
including P/F installing 5 mm thick clear/tinted Glass of
standard quality etc.comp. Sq.
Providing & Fixing in position Alluminium vents with
frame using approved anodised extruded alluminium
section as approved by Engg. In charge.(Jindal
alluminium) units equivalent Frame section of 63.50 x
mm. (wt.0.68 Kg/Rmt) incl. Providing & Installing
mm thick Glass of standard quality etc. comp. Sq.
Providing and fixing of Ridge flashing for roof panel
shall be made out of 0.5 mm thick pre coated GI
sheet. The Pre coatedsheet shall be of minimum
mpa steel grade confirming to IS 14246:1995 and shall
have zinc coating of minimum 120 gsm as per
IS:277:1992, 5-7 microns epoxy primer on both side of
the sheet and polyester top coat 15-18 micron. The PP GI
Sheet shall have plastic protective guard film of minimum
25 microns to avoid scratches during transportation. The
ridge shall be fixed to the steel members by poprivetor
self drilling/self stitching fastners @ maximum 450mm c/c
along length of capping/flashing etc complete .
Supplying and fixing vinyl flooring over the surface having
1-2 mm thickness as per directed by engineer
100 5 incharge etc as completed (N.S.) 963 Smt
Providing and laying 15mm bamboza wooden flooring
as per architect's drawing with all necessary details
as directed by the project consultants. Use underlay
for better result as per Detail specifications and directed
by the project consultants. (N.S.) Approved Rate )
Providing and fixing 1.20 Metre high fencing with
Metre long M.S. Angle posts 40 mm x 40 mm x 6 mm and
oil painting 3 coats fixed at 2.5 Mt, C/c. with five
Horizontan lines and two diagonals of galvanised steel
barbed wire weighting 9.38 Kg. per 100 Metre, strained and
fixed to posts with G.I, staples including fixing the posts
in ground with 0.5 M x 0.5.M x 0.5 M. block in C.C 1:5:10
Renovation and Repairing work in Chainlink fencing any
size and also refixing work incl. febrication work with all
materails to be painted one coat of primer and twocoats
103 5 of paint as directed inline and level. (N.S.) 735 Rmt.
Constructing a sink (chowkedi) with C.C. 1:2:4, 12 cm.
thick over B.B. masonry in C.M, (1:6) in front and dwarf wall
1.0 Mt. high and 23 cm. thick cement plaster to
masonry / in C.M.1:3) and cement concrete flooring in 1:2:4:
mix 5cm.dia.drain pipe etc.complete.
Constructing a cooking platform 60 cm. width and 70 cm
high resting on B.B. Masonry walls 23 cm. thick in C.M.
(1:6) with (i) Fixing or precast R.C.C. 1:2:4) 8 cm. thick
slab with marble chips set in C.M. (1:6) (6 mm thick
terrazo) with plastering on exposed faces walls in C.M.
(1:4) etc complete.
Extra rate for using Ready Mix Concrete of any grade
for below ground level to vertical upto any floor with
delivery & suction Pipe & Pump etc. The rate includes fule,
pump operator, skilled labor, driver etc completed and as per
direction of engineer in charge
P/A Tremix with dewartering machine and floater
machine on constructed CC work for finishing the surface
as per requirement. The rate including all machinaries,
labor, loading, unloading, transportaion etc
complete as per direction given by engineer incharge.
Carrying out timber treatment to all wood work including
drilling holes and spraying oil based chemical solution on
surface of timber work for termite control including labor and
material etc. complete. Using Chlorpyriphos20 EC as per
2013 Part III (1% concentration by mass) is recommended one
litre chemical emulsion diluted with 19 liters of kerosene. Total
diluted concentration will be 20 liters inclusive of 1 liter
chemical emulsion application in drilled holes and 0.75 / Litre
chemical per one Sqmt two coat on wood surface not
protected by paint or varnish.
Applying general insecticide pest control treatment to floors,
cupboards etc including labour materials etc. complete. Using
Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075%
concentration by mass) is recommended 10.5ml chemical
diluted with 5 liters of water application 0.5 litre chemical /Sqm
surface is recommended as per I.S.
Carring out plinth treatment to post construction / existing
structure by spraying chemical solution for termite
control treatment including labour and material consist
ment with I.S. specification. Using Chlordene and
Chior purfiles 20 EC. As Per 6131_paret-II
Consentration Weight on percentis recommended i.e one
litre 20 EC chemical emulsion with 19 liter give 1%
concrentration inclusive of one litre chemical emulsion
appication attherate of 5 Litre chemical / Sqm of
surface is recommended as per I.S
Carrying out wall treatment for termite control including
spraying with chemical solution in oil base including labour
and material Using Chlorpyriphos 20 ECAs per IS 6313 part -
II (1% concentration by mass) is recommended i.e one litre
emulsion diluted with 19 liter oil base. Total solution will be
liters inclusive of one liter chemical emulsion application at the
rate of 7.5 litre chemical / Sqm of surface is recommended as
Providing erecting and fixing double coated Syntex
or equivalent PVC.(ISI) water tank of required capacity
each with all necessary fittings and connection etc.
112 5 complete on terrace. 3.91 Litre
Providing and fixing to wall, ceiling and floor galvanised
Mild steel tubes (Medium grade) of the following
nominal bore, tube fitting and clamps including making good
113 5 the wall ceiling and floor.
5 (F) 50mm 779.6 Rmt
Providing and laying in trenches galvanised mild steel
tubes (Midium grade) of the following nominal bore,
and tube fitting (Earth work in trenches to be
114 5 measured and paid for separately)
Making connection of galvanised Mild steel distribution
branch with galvanised mild steel main 50 mm to 80 mm
nominal bore by providing and fixing tee including
115 5 cutting and threading the pipes complete. 600.08 Each
Providing and fixing to wall ceiling and floor 6.0 Kg.F/Cm2
working pressure poluthene pipes of the following out
side Dia. Low densidy, complete with special falnge
compression type fittings,wall clips etc.including
making good the wall ceiling and floor.
Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2
working pressure polythene pipes of the following out
side Dia. Low densidy, complete with special falnge
compression type fittings, wall clips etc. including
making good the wall ceiling and floor.
5 (C) 32mm 116.4 Rmt
Providing and fixing cast iron (Spun) Nahni trap of
the following nominal diameter of self cleaning design with
C.I. screaed down or higned grating including cost of
cutting and making good the walls and floor 100 mm inlet and
50 mm outlet.(C)100mm dia.
Providing and fixing water closet squatting Pan
(Indian type W.C.Pan) size 580 mm (Earth work, bed
concrete, foot rest and trap to be measured and paid for
separately) (A) Vitreous China. (I)Long pattern = White
Provdg. & fixing wall mounted White / Color
Vitreous China European water closet with integral
P trap of "Cera" - Clair Series or equivalent incl. seat
cover , Chair Bracket etc. complete as per direction of engg. In
Providing and fixing wsh down water closet (Europe
an type, W.C.Pan) with integral P or S trap including jointing
the trap with soil pipe in Cement Mortar1:1 (1-
Cement:1-fine sand) (Seal and cover to be measured and
paid forseparately) (A) vitreous China Pattern :(i) in white
Provdg. & Fixing Flat Back Large Urinal of White/ colour of
"Cera" or " Hindware" incl. C.P. Brass waste coupline
waste pipe, pvcconnection etc. Complete.( size
Providing & Fixing Angle cock of " Ess Ess" - Trend
series or equivalent standard make as approved by
123 5 engg. in charge all complete. (N.S.) 675 No.
Providing and fixing 100 mm size P or S trap for
water closet squatting pan including jointing the trap with
the pan and soil pipe in cement Mortar1:1 (1-Cement : 1-
124 5 Fine sand)(A) Vitreous China. 311.85 Each
Providing and fixing wash basin with single hole for pillar
tap with C.I.or M.S. brackets painted white including sutting
holes and making good the same but excluding fittings.
(A) Vitreous China: (ii) Flat Back wash basin 550 mm x v
mm size.(i) In white colour.
Providing and fixing Kitchen sink with C.I. or M.S. brackets,
painted white including cutting holes in walls and
making good the same but excluding fittings. © Vitreous
126 5 China Sink. (i) 600 mm x 450 mmx 150 mm size 2257.69 Each
Providing and fixing 600 mm x 450 mm bevelled edge
mirrror of superior glass mounted on 6 mm thick A.C.
sheet or ply wood sheet and fixing to wooden pluge with
127 5 C.P. brass screws and washers. 825.48 Each
Providing and fixing chromium plated brass halftrun flush cock
of approved quality including fixing in pipe line etc. complete.
Provdg. & fixing White / Color Vitreous china Counter
wash basin with signle hole for pillar tap of "Cera " -
Concord series of 550 x425 mm size to be fiited in stone
counter with necessary brackets painted white incl.
cutting holes and making good the same .Cost Includes
P/F C.P. brass waste coupline, 32 mm dia fisher union
mm dia. Pillar cock & Angle cock of " Ess Ess"- Trend
series ,32 mm dia. Waste pipe etc. complete as per
dir. of engg. in charge.
Providing and fixing washbasin with single holefor pillar tap
with C.I. or M.S. brackets painted white including sutting holes
and making goodthe same but excluding fittings.(A) Vitreous
China:(ii) Flat Back washbasin 550 mm x v400mm size. (i) In
Providing & Fixing S.S.304 Grade Sink of Nirali /
Krishna or Equivalent Make for Kitchen Platform of
131 5 size : 24":x18" as per Direction of engg. In charge 4,650.00 No.
Providing and fixing C.P. brass towel rail comlete with
C.P.brass brackets fixed to wooden plugs with C.P.
132 5 brass scews.(B) 600mm x 20mm size. 597.22 Each
Providing and fixing 600 mmx120 mm glass shelf with
C.P. brass bracket and guard rail complete mixed to
133 5 wooden plug with C.P.brass screws. 561.03 Each
134 5 Providing and fixing toilet paper holder. (A) C.P.Brass 414.53 Each
Providing and fixing screw down bib taps of following size.
135 5 (A) Brass screw down bib tap polished bright.
5 (i) 15mm dia. 184.98 Each
5 (ii) 20mm dia. 212.68 Each
Providing and fixing screw down bib taps of following size.
136 5 (B) Brass chromium plated screws down Bib Tap.
5 (i) 15mm dia. 184.98 Each
5 (ii) 20mm dia. 212.68 Each
Providing and fixing screw down bib taps of following
137 5 size. © Gun metal screw down bib tap.
5 (i) 15mm dia. 157.29 Each
5 (ii) 20mm dia. 176.09 Each
Providing and fixing pillar tap, capstan head, screw
138 5 down high pressure with screws, shanks and back nuts.
5 (i) 15mm dia. 305.67 Each
5 (ii) 20mm dia. 351.18 Each
Providing and fixing Gun metal check or non-return
139 5 fullway wheel valve.
5 (i) 15mm dia. 184.98 Each
5 (ii) 20mm dia. 201.8 Each
5 (III) 25 MM DIA 416.47 Each
5 (E) 40mm dia 656.86 Each
Providing and fixing chromium plated brass half trun
flush cock of approved quality including fixing in pipe line etc.
140 5 complete.
5 (i) 20mm dia. 252.26 Each
5 (ii) 25mm dia. 261.16 Each
5 (iii) 32mm dia. 273.03 Each
Providing and fixing Urinal or approved quality
including conecting the Urinal with waste pipe , tap
etc.complete. (A) White earthen ware flat back or corner
141 15 type size 430mm x 260mm x 350mm. 1026.01 Each
Providing and fixing Urinal of approved quality
including connection with trap and with integral
longitudinal flush pipe. (A) Squating plate pattern
142 15 white earthen ware 550mm x 300mm. 1535.63 Each
Providing and fixing chromium plated, bottle trap with
143 15 necessary couplings of approved quality for wash basin. 292.87 Each
Providing and fixing ball cock ofapproved quality as
144 10 directed. (A) Copper Metal (i) 25mm dia. 131.57 Each
Providing and fixing ball cock of approved quality as
145 10 directed. (B)Abonite (i) 25mm dia. 101.89 Each
Filling with good Quality thor as and where directed
by the Architect / Engineer-in-charge, in sunk in layers of
15 cm. thickness, including watering, ramming well etc.
complete, as directed by the Architect / Engineer-in-charge .
Providing laying and jointing in true line and level 15 mm dia.
U.P.V.C. Pipe (SCH-40) for cold water including fittings
make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or
equivalent as approved by Engineer In Charge. Pipe
shall be fixed on the wall with the help of clamp at every
two metre C/C or shall be concelled as directed
including necessary fittings etc. including testing of pipe
and joints and fixing the same with solvent, including cost
of all materials.adhesive
Providing laying and jointing in true line and level 25 mm dia.
U.P.V.C. Pipe (SCH-40) for cold water including fittings
make PRINCE/ SUPREME/ ASTRAL/ FINOLEX orequivalent
as approved by Engineer In Charge. Pipe shall be fixed
on the wall with the help of clamp at every two metre
C/C or shall be concelled as directed including
necessary fittings etc. including testing of pipe and joints
and fixing the same with adhesive solvent, including cost
of all materials.
Providing laying and jointing in true line and level 32 mm dia.
U.P.V.C. Pipe (SCH-40) for cold water including
fittings make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or
equivalent as approved by Engineer In Charge. Pipe
shall be fixed on the wall with the help of clamp at every
two metre C/C or shall be concelled as directed
including necessary fittings etc. including testing of pipe
and joints and fixing the same with adhesive solvent,
including cost of all materials.
Providing laying and jointing in true line and level 40 mm dia.
U.P.V.C. Pipe (SCH-40) for cold water including
fittings make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or
equivalent as approved by Engineer In Charge. Pipe
shall be fixed on the wall with the help of clamp at every
two metre C/C or shall be concelled as directed
including necessary fittings etc. including testing of pipe
and joints and fixing the same with adhesive solvent,
including cost of all materials.
Providing laying and jointing in true line and level 50 mm dia.
U.P.V.C. Pipe (SCH-40) for cold water including
fittings make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or
equivalent as approved by Engineer In Charge. Pipe
shall be fixed on the wall with the help of clamp at every
two metre C/C or shall be concelled as directed
including necessary fittings etc. including testing of pipe
and joints and fixing the same with adhesive solvent,
including cost of all materials.
Providing in line level plumb, fabricating and fixing
three row horizontal barbed wire fencing and punched tape
concertina coil of 9 turns per meter of 610 mm dia fixed
with clips on top of the angle iron posts. The punched
tape concertina coil having sharp barbs at every 25 mm
spacing shall be 0.5 mm thick and 19 mm width and
weighting 13 kg/100 mt. (Average) as per manufacture's
specification. The rate shall also include providing
and fixing 1.20 mt.total long MS angle 40 x 40 x 6 mm
@3.00 mt.c/c spacing embaded in RCC column, angle
posts shall be painted with one coats of red oxide and two
coats of enamel paint of approved quality at top compound
Fixing sun film for protection sunlight in black or any colour as
152 10 as directd by engineer In Charge.(Market rate) 850 Smt
Providing & Fixing 3 mm thick F.R.P.sheet of Approved
Quality & Color / Pattern as per Consultant's design also
includes required fabrication structure in the grid of 2'-
0x2'-0 size using hollow pipe of16 gauge & size 2"x1" &
1"x1" ,G.I. & Bitumen Washers, Silicon paste application
for fixing the sheet . Rate also includesnecessary bending,
cutting, labor charges , Zinc Primer coat & Two coats of oil
painting of color as approved by consultants & making
good the wall. (N.S.)
Providing 2 mm thick F.R.P. Gutter with necessary M.S.
154 10 Supporting Brackets. (N.S.) 400 Rmt
Hiring charges for J.C.B.machine inclduing cost of fuel,
operator, dirver etc.. ( 12 hours sift day/night)
To provide tractor with hydraulic trolley, driver, 4 Nos. of
Labor with all tools like bucket drum, showels, trikam,
pavadas, etc,, to carryout different works during
monsoon for 12 Hrs. Shift. Work shall be carried out as
per the instrucitons of Engineer In-Charge.No extra charged
shall be paid for night shift.
Roller Blind Providing and fixing Roller Blind curtain
fixed on window level on wooden batten and curtain
lift with cotton thin rope, make of aerolax or
equivalent design and colour as per instruction by
engineer – in – Charge with necessary hardware fitting,
material and labour etc complete.
Providing & Fixing Door closer - complete of Approved make
to wooden / Aluminium Doors as per direction of engg. In
158 10 charge. 560 No.
Providing and fixiing M.S. Fan clamps type 1 of 16 mm dia
M.S. bar bent to shape with hooked ends of R.C.C. slabs
during laying incl. painting the exposed protion of loops, all as
159 10 per standard design complete. 124.74 No.
Providing cement vata (10cm. x 10 cm. size) quarter round in
cement mortar 1:1 including neat cement finishing, watering
160 10 etc. complete. 23.45 Rmt
161 10 Making Water connection from exi.Muni. Water line (N.S.) 250 No.
Providing and applying fibere reinforced cementitious
micro concrete work in cellings and beams
incl.mixture of CEMSCREED HM (F) fair mate
company material, FBR bonding agent material with
water in suItable proportion anti corrosive treatment on
exposed beam,celling steel bars with safeCore R incl.all
kind of labour etc.comp.including three coat of white
wash.(Approved Rate)
Providing and Fixing 1 H.P. Electrical monoblock or
submarcible water pumps withmotor and required cable and
switch board of approved brand and make etc.comp.as
163 1 directed. 6,800.00 Set
.Providing TMT Bar FE 415 reinforcement for R.C.C. work
163 including bending, binding and placing in position complete up
a 10 to floor two level 66.59 Kg.
ProvidingTMTBarFE500/500Dreinforcement for
R.C.C.workincluding bending,binding and placing in position
complete upto floor two level placing in position complete upto
floor two level placing in position complete upto floor two level
Providing and fixing 30mm thick solid both side prelam PVC
door shutter (sintex door-equivalent) with necessary
164 10 alluminium fitting with EL-7 section frame 2,867.00 Smt
Conveyance charge of Earth,Lime, Murrum, building rubbish
earch manure or sludge and excavated rock and fly
165 10 ash,aggregate of any kind etc.comp.upto 5 km lead.(L.S.) 235.51 Cu.M.
Providing and laying polished granite stone slab 18 mm thick
in risers of steps, dedo and pllars laid on 10 mm thick cement
mortar 1:3 (1 cement:3 coarse sand) and jointed with gray
166 10 cement slurry including rubbing & polishing etc.complete. 2,690.00 Smt
Wall panelling with 12 mm MDF fixed to existing alluminium
framing and making grove as per design and finished with
royal plastic paint as per instruction of engineer incharge.
Providing and laying 15mm bamboza wooden flooring
as per architect's drawing with all necessary details
as directed by the project consultants. Use underlay
for better result as per Detail specifications and directed
by the project consultants. (N.S.) (Approved Rate )
Applying two coats of Birla (whitecementbased)
or Asian (acryliclapy-putty) or equivalent & two coats of
primer of approved brand and manufacture on new wall
surface to give an even shade including thoroughly brushing
the surface free from mortar dropping
Finishing wall with weather proof exterior emulsion paint on
wall surface (two coats) to give an required shape evenshade
after thoroughly brushing the surface to remove all dirt, and
170 50 remains of loose powdered materials.etc complete 113.4 Sq.M.
Providing and fixing flush door shutters, solid core
construction with frame of first class hardwood with cross
board and face veneer or plywood face panels, with both
side 1 mm laminate finishing including anodized
aluminum butt hinges with necessary screws.
Decorative type and pine wood core anodized minimum
3 no 150 mm long aluminum butt hinges in flush door
shutters with 2 no of brass holdfast 325 mm long 1 no
brass tower bolt 250 mm long and two no of 150 mm long
brass door handle . Decorative both side laminated
Flush door 35 mm thick. with frame of 10 cm x 7 cmt
Indian teak wood frame including all necessary fitting
fixtures hardware screw and adhesive etc fixing up to all
lead and lift height up to 45 mtr from GL etc complete as
per direction of engineer in charge
P/M/F chainlink jali 8'x4' size as per details sketch &
instructionof engineer in charge same as lal darwaja garden
pattern consisting of 3'dia. M.S black pipe 'A' class 5'4" ht.
fixed at 8'9" c/c in C.C 1:2:4 block of 9"x9"x9" size chain link
jali of size 2"x2"x10 gauge fixed in 35x35x5 mm MS angle
frame 8'x4' size with MS flat of size 25x3 mm welded jali
etc.comp.The jali is to be welded to MS pipe with MS flat as
instruction given.The M.S pipe and the M.S angle frame are to
be painted one coat of primer and two coats of paint as
directed in line and level. (N.S)
Providing & Fixing masonary wall with porbandar lachiya stone
with well dressed grooveas per directed by engg.in charge for
foundation, plinth or super structure level (above plinth level
upto floor two level) in cement mortar 1:5 (1-cement : 5-fine
sand) incl.pointing the joint with white cement and yellow oxide
powder in proportion to match stone colour the joints should
be thread grooved as per exi. lake stone pitching apperance
(A) stone masonary wall/stone dressed single faced (size
50 (B) stone coping (size 15"x8"x4") 510 Rmt
50 (C) stone coping (size 15"x8"x9") 790 Rmt
50 (D) stone column (size 15"x15") 10,710.00 Cmt
50 (E) stone column top (size 20"x20"x9") 685 No.
Supplying and fixing of 300 mm-L x 15 mm-B x 380 mm-H
Kerb block for Footpath in M-20 grade using 20 mm
nominal size black trap aggregate of Sevaliya/Timbaor
equivalent quality for pre-cast blocks,
reasonablyexposed finish/ formwork , mould
with well equippedwith vibratory system for kerb stones
of approved design including curing, etc. complete,
including thecost of formwork etc. complete. The rate
shall also include necessary cutting of asphalt, fixing
the Kerbstones in line and level on 5 cm thick sand
bedding withnecessary equipments and
materials. The rate shall also include the flush pointing in
CM (1:3) for all joints of thekerbstones. Filling of zari alone the
sides of the kerbstone fixed with Bituminous
concrete Bituminousconcrete / C.C. mixed in proper
position to flush withthe road surface as directed by
Engineer in change to form a portable mixture.a) Laying
on 5 cm thick Sand Bedding
Providing and Laying of Rubber Moulded Paver Block
Grey/Coloured 60 mm thick, M-35 Grade of any size shape
(Usually Uni-Paver Blocks) using black trap good quality
aggragate of 20 mm nominal size for footpath,parking areas,
service lanes and other areas as mentioned in the drawing /
instruction of engineer in charge. Cost includes formworks
using rubber mould, Rate providing and laying paver blocks as
per required grading and specification. The paver block shall
be mechanically compacted. The work of paving blocks shall
be executed in line and level by skill mason of flooring work
only. It should be laid in such a way that the no cutting of the
paver block to be necessary. if cutting of paver block
necessary then it should be cut by machine only and carting.
The finished surface of the paver block shall have resonably
good, plain finished. Paver blocks shall be compacted and
shall be relaid if necessary. Gravel or such type of materials
shall not be allowed for production. Laying on 5 cms thick
Provoding and fixing flush door shutters, solid core
construction with frame of first class hard wood with cross
board and face veneer or ply wood face panels, including
anodised alluminium butt hinges with necessary screws. (B)
Non- decorative type and block board core anodised
alluminium butt hinges in flush door shutters (2) 35 mm thick.
Labour work for fixing any kind of paving with cement pointing
in CM 1:2, including watering, ramming etc comp. as dir.For
I) Laying on Sand bedding as per requirement to fix the
177 50 C.C.Block / Nibhada Stone in Line & Level 78 Smt
Box type metal letters forming composite box made from 1mm
thick stainless steel plate of grade 304 having brush finish of
following font size to be fixed at Main Gate in english and or
Gujrati and including fixing charges approved before fixing by
clent / consultant.
A 5 400mm high 1,000.00 Nos.
B 5 300 mm high 750 Nos.
C 5 230 mm high 565 Nos.
Providing and fixing false ceiling at all height including
providing and fixing of frame work made of special sections,
power pressed from M.S. sheets and galvanized with zinc
coating of 120 gms/sqm (both side inclusive) as per IS :
and consisting of angle cleats of size 25 mm wide x 1.6 mm
thick with flanges of 27 mm and 37mm, at 1200 mm centre to
centre, one flange fixed to the ceiling with dash fastener
mm dia x 50mm long with 6mm dia bolts, other flange of cleat
fixed to the angle hangers of 25x10x0.50 mm of required
length with nuts & bolts of required size and other end of angle
hanger fixed with intermediate G.I. channels 45x15x0.9 mm
running at the spacing of 1200 mm centre to centre, to which
the ceiling section 0.5 mm thick bottom wedge of 80 mm with
tapered flanges of 26 mm each having lips of 10.5 mm, at
mm centre to centre, shall be fixed in a direction perpendicular
to G.I. intermediate channel with connecting clips made out of
2.64 mm dia x 230 mm long G.I. wire at every junction,
including fixing perimeter channels 0.5 mm thick 27 mm high
having flanges of 20 mm and 30 mm long, the perimeter of
ceiling fixed to wall/partition with the help of rawl plugs at
mm centre, with 25mm long dry wall screws @ 230 mm
interval, including fixing of gypsum board to ceiling section and
perimeter channel with the help of dry wall screws of size 3.5 x
25 mm at 230 mm c/c, including jointing and finishing to a
flush finish of tapered and square edges of the board with
recomme-nded jointing compound , jointing tapes , finishing
with jointing compound in 3 layers covering upto 150 mm on
both sides of joint and two coats of primer suitable for board,
all as per manufacturer’s specification and also including the
cost of making openings for light fittings, grills, diffusers,
cutouts made with frame of perimeter channels suitably fixed,
all complete as per drawings, specification and direction of the
179 50 Engineer in Charge but excluding the cost of painting. 850 Smt
Providing & Fixing SPEED BUMP - #2 No (1 black, 1 yellow)
350 x 500 x 50 mm, Size per color End Cape 350 MM x
MM x 50 MM TOP DESIGN - Lining Top flat ANTI SKID
PATTERN FOR GRIP COLOUR :- YELLOW & BLACK BODY
MATERIAL :- MODIFIED THERMOPLASTICS (Polymer
Rubberized ) • ECO FRIENDLY RECYCLE RUBBER
Packing :- 4 pcs/ woven Bag Load Capacity :- 20 MT Fitting (
Fixing on TRAKE) :-4 holes & END CAPE :- 2 HOLE HEX
Bolts with Washer Epoxy for Bolt Fitting etc. complete as
directed by EIC .
Providing and fixing of Roller blind curtain/blackout. The fabric
shall be woven from formulated platisol extruded over a
polyaster yarn.The fabric shouldl be weaved to provide subtle
view of the side of the blind and should offer elimination of
glare and sunlight radiance upto a minimum of 80%.The fabric
shall be flame retardant.
Providing and fixing PVC/Gpsysum plain colour false ceiling
with grid type with aluminium frame from gypsteel,
fastners ,props, Finishing as per architectural drawing
allowing openings for A.C. Diffusers,
Light/Electrical Points etc –complete, Prior to fixing on
frame.(Brand : Anutone or equivalent ) (N.S.) or as
directd by engineer In Charge.
Provdg. & laying S.W. Gully trap with brick masonry chamber
& water tight G.T.Stone including fixing of covervSquare
183 35 mouth trap 100 mm x100 mm size P-Trap 1,263.15 No.
Providing cement vata (10cmx10cmsize) quarter roundin
cement mortar 1:1 including neat cement finishing, waterin
184 38 getc. complete. 23.45 Rmt.
Providing and laying (to level or slopes) and jointing with stiff
mixture of Cement Mortar in proportion 1:1 Salt glazed
stoneware pipes including testing of pipes and joints
185 35 complete.(A) 100mm dia. 211.05 Rmt.
Providing and laying (to level or slopes) and jointing with stiff
mixture of Cement Mortar in proportion 1:1 Salt glazed
stoneware pipes including testing of pipes and joints
186 35 complete.(B) 150mm dia. 288.23 Rmt.
Constructing brick masonry chamber for underground C.I.
Inspection chamber and bends with bricks having crushing
strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with
frame (Light duty) 455mm x 610mm intenal dimensions total
weight of cover with frame to be not less than 38Kg. (Wt. of
cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with
1:2:4 mix (1-cement :2- coarse sand :4-graded stone
aggregate 20mm size) foundation concrete 1:5:10 inside
plaster 15mm thick with cement mortar 1:3 finished smooth
with a floating coat of neat cement on walls and bed concrete
etc. complete.(i) Inside dimensions 455mmx 610mm and
450mm deep for single pipe line.
Constructing brick masonry chamber for underground C.I.
Inspection chamber and bends with bricks having crushing
strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with
frame (Light duty) 455mm x 610mm intenal dimensions total
weight of cover with frame to be not less than 38Kg. (Wt. of
cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with
1:2:4 mix (1-cement :2- coarse sand :4-graded stone
aggregate 20mm size) foundation concrete 1:5:10 inside
plaster 15mm thick with cement mortar 1:3 finished smooth
with a floating coat of neat cement on walls and bed concrete
etc. complete.(i)Inside dimensions 500mm x 700 mm and
450mm deep for pipe line with one or two inlets.
Providing, supplying and fixing precast C.C. blocks (M-20)
edge kerb having size of 75 x 300 x 300 mm depth and as per
design conveying it to the site, jointing into C:M 1:3 and
racking out the joints incl. necessary excavation of asphalt,
soil etc..completed.
Constructing a cooking Sandwich platform 60 cm. width and
70 cm high resting on B.B.Masonry walls 23 cm.thick in
C.M.(1:6) with (ii) Fixing black Granitee 30mm thick laid on
precast R.C.C. (1:2:4) slab with plastering on exposed faces of
wall in C.M. (1:4) etc complete
Providing and fixing hard drawn steel wire fabric 75mm x
25mm mesh or weight not less than 7.75 kg. per Sq.M. to
window frames etc. including60 x 20mm beading of teak
191 20 wood. 754.65 Smt
Providing & fixing 15 cm wide chicken mesh jali with nails &
then application of 15 mm plaster on R.C.C.& masonary joints
192 20 as per dir.of engg.in charge 35 Rmt.
Providing and laying cement concrete flooring 1:2:4 (1-
cement : 2-coarse sand : 4-graded stone aggregate 20mm
nominal size) laid in one layer and finished with a floating
193 50 coat of neat cement. (A) 50mm thick. 348.08 Smt.
Providing and constructing, Underground (U/G) water tank
of specified capacity, on specified location, for all depths, in
controlled CC of M-200 grade with bottom slab, top slab
and RCC walls, including cost of form work and
reinforcement,with inside and outside plaster in CM 1 :3
and water proofing treatment as per IWP
specification,including injection, grouting, etc. complete.
The rate includes for providing and fixing two nos. 0.6m. x
0.6 m. size medium duty CI manhole cover/s at top,
including wash out pipe line and inlet and outlet
connections etc. complete.
Providing and fixing PVC Printed pain colour false ceiling
with grid type with alluminium frame consisting of 600mm
x 600mm 3mm thick plain PVC sheet used as panel insert in
a frame work made using anodized alluminium T section of
size 1 x 1 (235 x 25mm, 19 gauge or 1 mm thick) in square
pattern of grid sizes of 2 x 2 (600 x 600mm) The alluminium
frame work is supported from the cceiling with the help of
G.I. hook and G.I. wire/6mm M.S. rods of required sizes to
maintain proper level etc. The aluminium frame work is
supported on side wall with the use of alluminium L section
of size 1 x1 (25 x 25mm) angles etc. complete as per
direction of Engineer in charge. Manufactures specification
Providing and supplying of labour for necessary manual
excavation, cleaning, Shifting of Material Or any other, or
for any other work as directed by Engineer In charge. The
196 50 Rate includes Handcart with Mazdoor 551 No
A 100 Mukadam/supervisior/karigar 425 No
B 100 Fitter/Plumber/Mason 697 No
C 100 WELDER/ Gas cutter at Day /night 689 No
Supplting of welding machine / gas cutter including cost of
welding rods/gas, Transportation, including carting from
D 66 site to work place. 1500 No
E 55 Mazdoor at Day Female 450 No's
E 70 Mazdoor at Day Male 493 No's
Supplying electric breaker machine for RCC slab or asphalt
demolishing work on site by using operator, fuel, power
supply etc.complete as directed. (no payment should be
allowed for non working condition of machinery and for
pipe line excavation and M.H. work. Allowed only for break
down work) (Based on Previously approved rate by CE sir )
Providing and fixing concealed center point to wall ceiling
& floor CPVC (SDR 13.5) PIPE having National Sanitation
Foundation (NSF) seal for potable water of following dia.
Nominal bore tube fittings and clamps including making
198 good the wall, ceiling and floor etc. complete.
A 52 15 MM DIA 165.21 Rmt
B 51 20 MM DIA 202.97 Rmt
C 50 25 MM DIA 247.25 Rmt
D 50 32 MM DIA 330.36 Rmt
E 50 40 MM DIA 437.66 Rmt
199 50 50 MM DIA 647.3 Rmt
Supplying and fixing C.I. cover 300mm x 300mm without
frame for Gulley trap (Standard pattern) te weight of cover
200 30 to be not less 4.53 Kg.) 491.8 Each
Providing and fixing to wall ceiling and floor
10.0Kg.F/Cm2 working pressure polythene pipes of
the following out side Dia. Low densidy, complete
with special falnge compression type fittings, wall
clips etc. including making good the wall ceiling and
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
ABSTRACT TN 11 tno.05.2627.pdf
T NO-11 PDF.pdf
Tn 11 building notice 05.pdf
Download all tender documents and submit your bid