ADDN ALTN TO OTM ACCN BLDG NO P 425 AT PRC AT RAMGARH CANTT

Amount

Taking down chowkhats or frames with shutter (without taking off shutter from the frames) of any description exceeding 1.5 Sqm but not exceeding 4.0 Sqm each, removal from site and making good the disturbed surface in cement mortar 1:3 complete all as specified & directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frames) of any description not exceeding 1.50 Sqm each, removal from site and making good the disturbed surface in cement mortar 1:3 complete all as specified & directed.

Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.0 Sq m each, and removing from site, complete all as specified and directed by Engineer-in-Charge .

S&F for 1.25 mm thick pressed steel door frames of size 125mm x 60 mm for single or double doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including plain cement concrete 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregate) as in filling in pressed steel door complete all as specified and directed. Note: The quoted unit rate under this item shall deemed to be included one shop coat of primer.

S&F for 1.25 mm thick pressed steel door frames of size 105mm x 60 mm for single or double doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including plain cement concrete 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregate) as in filling in pressed steel door complete all as specified and directed. Note: The quoted unit rate under this item shall deemed to be included one shop coat of primer.

S & F 35 mm thick, factory made, IInd class hard wood plain framed panelled door shutter (two panel) with lock rail and panel of 12 mm BWP commercial ply on both faces . The size of rail and stile as per IS :1003 (part-I) kiln seasoned and chemically pressure treated complete all as specified and directed .

S & F 35 mm thick, factory made, IInd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (divided into squares with plain, chamfered or rounded, mitred and rebated sash bars any number size of members), beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); kiln seasoned & chemically pressure treated etc complete all as specified and directed . (Note:- (i)Glass / wire cloth shall be measured & paid separately. (ii) Sample of shutter in sample room of GE office.)

S & F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. mild steel framed shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail &bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS framed welded/sealed to stiles & rails with suitable PVC sheet beading & joined together with solvent cement complete all as fixing in the frame at site as per specification and drawing including 3 Nos stainless steel butt hinges 100 mm long for each door, complete all as specified and as directed.

S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tubes suppyling & fixing in opening as per specification & drawing complete all as spcefied and directed by Engineer-in-Charge . .

S & F 150 mm (overall length of cover plate) floor door stopper with rubber shoes aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in floor complete all as specified and directed.

S & F 100mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed .

S & F 75 mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed .

S&F 100 mm long aluminium anodised barrel tower bolts of extruded section and fixed all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed all as specified and directed.

S&F 125 mm aluminium alloy handles of extruted section type, anodised complete all as specified & directed.

S&F 250 mm long aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F mild steel 300 mm size , ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

S&F steel window with side hung shutters including projecting type hinges with steel handles and steel peg stay complete with glazing bars, dovetailed or welded with four Nos mild steel flat iron 25 mm X 3mm ,200 mm length (appx) & two Nos mild steel tower bolt 300 mm long and one peg stay on each leaf complete all as specified and directed

S&F steel window with side hung shutters including projecting type hinges with steel handles and steel peg stay complete without glazing bars, dovetailed or welded with four Nos mild steel flat iron 25 mm X 3mm ,200 mm length (appx)& two Nos mild steel tower bolt 300 mm long and one peg stay on each leaf complete all as specified and directed.

Easing & adjusting of existing steel window shutter including cleaning and greasing the hinges refixing the handles complete all as specified and directed

M&L for framed work such as grills,gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railing; framework of water tanks and similar work conforming to Fe 290- Gde E -165 & for portions framed and hung as gates, including pintle hinges, stops,hand-made sliding bolts, etc.complete all as specified and as directed

M & L for 3mm thick plain sheet glass ordinary quality and glazing with oil putty not exceeding 0.50 Sqm in each pane,complete all as specified and as directed by Engineer-in-Charge .

S & F for Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples /wooden beads & fixed to steel/wooden frames complete all as specified and directed.

M&L plain cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) in for inserting hold fast of doors & window & similar work etc. including necessary form work complete all as specified and directed

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc including removal of rubbish out of MOD land etc.,complete all as specified and directed.

S & F in repair 25 mm dia aluminium anodised curtains rod with fixing for brackets,stops, rollers etc.,complete all as specified and as directed by Engineer-in-Charge. Note: Running length of curtain rod shall be measured & paid only.

S&F in repair chromium plated (CP) soap tray of size 160x160x90mm, complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18mm -20 mm thick of size not less than 575 mm X 575 mm, over laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing & polishing over & including 20 mm thick screed bed in CM (1:6) complete all as specifed & directed.

M&L for machine cut kota stone slab in skirtings,riser of steps ,dado & pillar 10 to 12 mm thick laid and jointed with grey cement slurry pointed with cloured cement to match the shade of the slab including grinding rubbing & polishing over 10 mm thick backing coat in CM (1:4) etc complete all as specifed & directed.

M&L for machine cut kota stone slab flooring 18mm -20 mm thick (except kota stone) , over laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing & polishing over & including 20 mm thick screed bed in CM (1:6) complete all as specifed & directed.Note : Kota stone obtained from here-in - before item No.25 of BOQ.

M & L joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc., over and including 15mm thick screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.

M & L glazed ceramic coloured tiles of size 375 mm x 250 mm x7mm/450 mm x 300 mm x7 mm thick ,as in dado/skirting etc ,set and jointed in neat cement slurry and pointed in colour cement to match the tiles over & including 10 mm thick rendering in cement plaster in CM (1:4) complete all as specified and directed.

M&L for 16 to 18 mm thick granite slab (or any type) table rubbed and pre mirror polished in steps,jambs,pillar,window cill,cooking platforms and like in cement mortar1:4, set & jointed in neat cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,over & including 20 mm thick rendering in cement mortar(1:4) etc complete all as specifed and as directed.

S&F WC squatting pan " Orissa Pattern" of size 580 mm X 440 mm white with integral foot rest including cast iron "P" or "S" trap, front or back inlet and making connection to trap & to flushing cistern complete including taking down existing pan & making good disturbed surface complete all as specified & directed.

S & Fin repair vitreous China half stall type (back to corner ) urinals with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)(back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe etc.complete all as specified and as directed

S & F in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including all standard accessories such as inlet ball valve float and handle, PVC flush pipe 32 mm bore & PVC connection 15 mm bore 450 mm long with PTMT nuts and brackets complete set & making good disturbed surface with CM 1:3 complete all as specified and directed.

S & F in repair 40 mm bore unplasticised PVC pipes of pressure rating 10 kgf/sq.cm fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

S&F in repair for PVC connection 15 mm dia size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repair brass chromium plated shower rose with swivel joints, 125 mm size in square with CP long shank arm including fixing to steel pipe or union complete all as specifed & as directed.

S&F for towel Ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 90gms) complete all as specifed & as directed.

Taking up or down steel tubing and connections of 15 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed.

Taking up or down steel tubing and connections of 20 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed.

Refixing for 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc) complete all as specified & directed.all as specified & directed.

Refixing for 20 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.) complete all as specified & directed.all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 15 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors including cutting chasees for brick walls and making good the surface in cement mortar 1:3 complete all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 20 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls /laid in trenches and ceiling or laid in floors including cutting chasees for brick walls and making good the surfacein cement mortar 1:3 complete all as specified & directed.

S&F rotational moulded polythene water storage tank of capacity 1000 ltrs (Cylindrical/vertical with closed type), triple layer construction, ISI marked, hoisted and fixed in position including 20 mm bore GI nipple and 20 mm bore ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) including taking down of existing tank complete all as specified and directed.

S&F in repair stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15 mm bore complete all as specified & directed.

S&F in repair angle stop cock fancy type chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15 mm bore complete all as specified & directed.

S&F in repair stop valve 15mm bore chromium plated fancy type,cast copper alloy, screwed down high pressure, screwed both ends for iron pipe or for brass ferrule fixed concealed in wall with CP wall cap etc complete all as specified and directed.

S & F in repair pillar taps long body chromium plated, cast copper alloy with capstan head, chromium plated, screwed down with or without lettered 'Hot' or 'Cold' with long screw shanks and fly nuts, screwed for iron pipe and fixed for 15 mm bore complete all as specified & directed.

S&F in repair bib taps , cast copper alloy with capstan head or butter fly handle,chromium plated screwed down with high pressure screwed for iron pipe and fixed 15 mm bore complete all as specified & directed.

S & F in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F in repair 15mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Taking down cement plaster of brick or stone masonry etc including raking out joints , hacking for key & scrubbing down with water etc & removal of rubbish out off from site etc complete all as specified and directed.

M&L for rendering 15 mm thick on external surface of brick masonry/concrete surface etc in cement mortar (1:4) mixed with liquid water proofing compound @ 200 ml/50 Kg of cement ,surface finished even & smooth without using extra cement complete all as specified and directed. Note:Water proofing compound will be measured and paid seprerately under respective item of "BoQ".

M&L for rendering 10 mm thick on fair face of brick masonry/concrete surface etc in cement mortar (1:6) surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in CM (1:3) on concrete surfaces as in ceiling, including finish the surface even and smooth without using extra cement including taking down of existing plaster complete all as specified and directed.

M&L for preparation of newly plaster surface of wall and applying two coats of cement base paint over a coat of alkali primer including necessary scaffolding complete all as specified & as directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil emulsion distemper(OBD) over a coat of primer and a layer of wall care putty (not less than 2.0 mm thick) complete all as specified and directed.

M&L for preparation of newely plastered surfaces of ceiling and applying two coat of white wash on new ceiling surface complete all as specified & directed.

M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with preparation of plastered surfaces and apply two coats of distemper oil emulsion (OBD) over a coat of primer and a layer of putty (not less than 2.0 mm thick )complete all as specified and directed.

M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with preparation of plastered surfaces and apply two coats of white wash on ceiling surface complete all as specified and directed.

M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with preparation of plastered surfaces and applying two coats of cement base paint over a coat of alkali primer complete all as specified and directed.

Taking down existing complete roof /parapet treatment any thickness including mud phuska, plastering, leaping plaster of any thickness cuting & up rooting tree roots/Vegitable growth & removing the debris from the premises upto 500m from the MOD land including cleaning/washing down and keeping surfaces clean complete all as specified and as directed.

M & L for application of water proofing treatment using APP modified roof membrane over non accessible/ non approachable RCC roof slab / chajjah / canopy / parapet wall( horizontal/vertical surface) to be executed through approved applicator of the membrane manufacturer/authorized applicator of the manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly with wire brush & apply 10 mm thick screed bed in cement mortar (1:4) mixed with integral water proofing chemical compound, mixed in proportion 200 milli litre per 50 Kg of cement. (b) Applying approved bituminous based primer( conforming to IS: 3384-1995) @ 0.50 litre / Sqm manufactured by the same agency as that of APP membrane with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface (c) Laying not less than 3mm thick APP (Atactic polypropylene Polymer modified prefabricated membrane) modified water proofing membrane weighing not less than 3.00 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gms/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Physical property of membrane shall be as under :- (i) Membrane weight not less than 3.00 Kg/Sqm. (ii) Non woven polyester weight not less than 160 gms/Sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 150 Kg / Sqcm and transverse not less than 450 Kg /Sq.cm at 230 degree Celsius. (v) Tear strength - longitudinal not less than 300 N & transverse not less than 250N. (vi) Elongation of reinforcement not less than 30%. (vii) Impermeability under water pressure not less than 3 Kg/Sqcm. (d) APP modified polymeric membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Applying two coat of bituminious based Aluminium Paint @ 0.3 Kg /sqm over APP Membrane.

M&L for plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in kerb/benching /copings leveliing course/window cill etc. including weathering,slightly rounded or chamfered angle and throating including use & waste of necessary form work etc complete all as specified and directed

Supply only liquid water proofing compound complete all as specified and directed.

M&L for prepartion of new or previously untreated steel surface of any description , not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

M&L for prepartion of old painted of steel surface of any description , not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint on old steel painted surface complete all as specified & directed.

M & L for preparation of new or previously untreated wood & wood base surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M & L for preparation of old painted wood & wood base surface of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition of brick work of any description and in any position built in cement or cement lime mortar including all quoins, arches, pillars including segregation of serviceable bricks for reuse & removal of rubbish out off from site etc complete all as specified and directed.

M&L for Brick work using fly ash bricks old size , straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 etc complete all as specified & directed.

M&L for mild steel TMT bars 10 mm dia and over grade Fe -500 , as in reinforcement ,cut to length, bent to shape required, including cranking bending spirally for hooping for column,, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete etc all as specified and directed.

M&L for precast reinforced cement concrete 1:2:4 ,type B-1 (using 20 mm graded crushed stone aggregate) as in kitchen platform, shelves ,man hole cover slab, etc. including necessary formwork complete all as specified and directed. Note : Reinforcement will be measured & paid seperately under respective item of BOQ.

S&F in repair 75 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed on wall including PVC clamp properly with PCC 1:2:4 complete all as specified and directed

S&F in repair 110 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed on wall including PVC clamp properly with PCC 1:2:4 complete all as specified and directed

S&F in repair 110 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches ,floor complete all as specified and directed.

S&F in repair 75 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches ,floor complete all as specified and directed.

S&F in repair 110 mm PVC(SWR) bends any radius with access door complete all as specified and directed.

S&F in repair 75 mm PVC(SWR) bends any radius with access door complete all as specified and directed.

S&F in repair 110 mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair 75 mm PVC (SWR) branch piece ,double (double -Y) equal or unequal complete all as specified and directed.

S&F in repair 110 mm PVC (SWR) branch piece ,double (double -Y) equal or unequal complete all as specified and directed.

S&F in repair 75 mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair 110 mm PVC (SWR) vent cowl complete all as specified and directed.

S&F in repair 75 mm PVC (SWR) vent cowl complete all as specified and directed.

S&F in repair 75mm dia(outlet) Cast iron floor trap, with chromium plated grating including jointing with run lead joint to waste pipe & making good to match with existing surfacecomplete all as directed and as specified.

S&F in repair 75mm dia(outlet) Cast iron nahani trap, with chromium plated grating including jointing with run lead joint to waste pipe & making good to match with existing surfacecomplete all as directed and as specified.

M&L for repair of RCC chajjas,Fins, fascias, louvres, parapets, bands, shelves & similar works and railings of any in height, newels, balustrade, and the like with after removing cracked plaster and concrete surface including cleaning of visible reinforcement and treating with cement concrete 1:1.5:3 type A-O( using 6 mm to 12.5mm graded crushed stone aggregate )including necesssary scaffolding work for double/single storey/any height of building including taking down spoil out/loose portion of fins, fascias, louvres, parapets, railings, chajjas and similar suspended work complete all as specified and directed.

M & L for 75 mm thick plain cement concrete (1:3:6) mix, type C-1 (using 20mm graded crushed stone aggregate ) as in plinth protection, finishing the surfaces even and fair without using extra cement, including 10 mm wide, 75mm deep joints made at 3.00 m in length and filled with bitumen 85/25 grade and sand in the ratio 1:3 including necessary form work , complete all as specified and directed.

Demolition of plain cement concrete(un-reinforced ) in ground floors, terrazo tiles floor & paving exceeding 15cm thickness (below or above ground level) and removal of rubbish off from site complete all as directed by Engr-in-Charge.

M&L for post construction anti termite treatment for treating along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified & directed .

Taking down carefully unserveciable/damaged copper/aluminium surface (batten/coduit or casing caping) point wiring any length for light/fan/socket or power including unscrewing from board (fitting and fixture such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets ,light fittings etc) and removing material from site and making good to the disturbed surface to match with existing finish etc complete all as specified and directed.

M&L for point wiring for one light/fan point controlled by one , one way switch with using with FRLSH PVC insulated PVC unsheathed electric cable conforming to IS:694, 1100V grade AC, single core having multi stranded copper conductor of size 1.5 Sq.mm nominal cross sectional area for phase & neutral and including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system & 1.5 Sqmm green PVC insulated unsheathed multistranded copper conductor as a earth wire connected to earth dolly by providing lugs including sunken type anodized pressed steel sheet terminal box (normal & modular type) made out of 1.6mm thick of suitable size, for mounting fittings/junction boxes including PVC board with bakelite sheet 2.8 mm thick laminated cover make sheet for housing/ fixing switches etc., including cutting holes for switches,sockets,regulators etc as per requirement including fixing with machine screw,washer etc complete all as specified and directed. Note: Proper colour coding to be adopted.

All as per item No .97 here-in-before but 3/5 pin socket outlet 5 Amp socket outlet on same board.with other switches

All as per item No .97 here-in-before but 3/5 pin socket outlet 5 Amp socket outlet on independent board.

All as per item No. 97 here-in-before with 2.5 Sqmm (nominal area) FRLSH cable PVC for 15 Amp 3/5 pin socket power point including 2.5 Sqmm copper conductor for earth continuity all as specified, complete all as specified and directed.

S & F switch piano flush button single pole one way 5/6 Amp, complete all as specified and as directed.

S & F socket outlet 2 in 1, 3 pin, 5Amp/6 Amp, flush type, universal, complete all as specified.

S & F ceiling rose three terminals PVC/ Polycarbonate, isolated body complete all as specified & as directed

S&F fan regulator electronic, step type hum free, socket type, suitable for ceiling fans of any capacity, pre wired 230 volts AC 50 HZ supply 100/120 Watt complete all as specified & as directed

S & F lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings (ISI marked), complete all as specified.

S & F in repair LED bulb of capacity 10 watt , lumen out put (950)lm ,length 113 mm dia 60 mm , base cap B22 (ISI mark) ,three star rated lamp with all accessories complete all as specified and as directed by Engineer-in-Charge.

S & F Inverter LED bulb of capacity 12 Watts lumen output (1200) length 140 mm width 70mm base cap B22 ,3 star (ISI Marked) complete all as specified and directed by Engineer in Charge.

S & F socket outlet 2 in 1, 3 pin, 15Amp/16 Amp, flush type, universal, complete all as specified.

S & F switch piano flush button single pole one way 15/16 Amp, complete all as specified and as directed.

S & F for LED batten fitting 1x 20W, 220V, surface mounting including connecting up with two core flexible copper conductor cable of suitable size with flexible copper conductor cable of suitable size with flexible pipe from ceiling rose to fitting of any size , complete all as specified and as directed by Engineer-in-Charge.

S & F for LED batten fitting 2 feet x 10 W, 220V, AC, surface mounting including connecting up with two core flexible copper conductor cable of suitable size with flexible pipe of any size complete all as specified & directed.

S & F in repair sheet metal enclosures (CRCA sheet) dust & vermin proof for DBs when MCBs to be used in tipple pole and neutral (TPN) double door 415 volts, 4 way, IP-43 with magnetic locking system including necessary provision for inserting the the DBs in wall & suitable rated amp bus bar and neutral link (ISI marked) complete all as specified and as directed.

S&F miniature circuit breaker (MCB) 415 V , breaking capacity 10 KA, 'B' curve of TPN/FP ( tripple poles and neutral/four pole) and current carrying capacity 100 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

S & F in repair sheet metal enclosures powder coated for DBs when MCBs to used single pole and neutral (SPN) double door 240 volts, 8 way including 200 Amp bus bar and neutral link (ISI marked) EARTH BAR & DIN RAIL confirm to IS:13032-1991 DB complete all as specified and as directed.

S&F miniature circuit breaker (MCB) of single pole and current carrying capacity 6 Amp to 32 Amp , 240V ,breaking capacity 10 KA, 'B' curve in the MCB DB complete with connection testing and commissioning including suitable size copper lugs complete all as specified and as directed.

S&F miniature circuit breaker (MCB) of double pole (DP) and current carrying capacity 40 Amp , 240V ,breaking capacity 10 KA, 'B' curve in the MCB DB complete with connection testing and commissioning including suitable size copper lugs complete all as specified and as directed.

S & F in repair LED security lights aesthetically designed roadway with new generation energy saving & environment friendly long life versattle pressure dia cast aluminium IP-66 road luminarie with high power LED as light source & exclisively designed polycarbonate cover alongwith electronic driver type security light fitting 35 watt capacity LED including all accessories duly pre-wired,fixing on existing bracket with nut,bolt & washer etc as required at site for fixing of security light on pole/wall including provision of two core flexible copper cable of size 2.5 sqmm not less than 1.5 mtr long for connection complete all as specified & directed.

S &F in repair bracket made out of 40 mm dia GI pipe light grade 1.50 mtr long bend to shape as per site requirement fixed to pole /wall with 50mm x 6 mm size flat iron clamp -02 Nos,nuts & bolt of 12 mm dia 100 mm long with washer etc duly painted applying two coats of synthetic enamel paint over a coat of red oxide primer on mild steel exposed surface including prepartion of new or previously untreated steel surface of any description,not otherwise described over 10 cm in width or girth complete all as specified & directed.

S&F 1X9 W/1X10 W watt LED Bulkhead fitting with IP 65 environmental frendly, ultra modern, energy saving mounted decorative oval bulk head edge lit LED luminaire comprising of high brightness LED 230 Volts AC circuit including light connecting up with two core flexible copper conductor cable and flexible pipe of suitable size from ceiling rose to fitting, complete all as specified and as directed by Engineer-in-Charge.

M & L Sub main wiring with two runs of single core 6.0 Sqmm PVC insulated FRLSH multistanderd copper conductor cable and one run of 6.0 Sqmm PVC insulated unsheathed FRLSH multi stranded copper conductor cable for earth wire drawn in & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 25 mm dia/appropriate dia with accessories & fittings complete and making good disturbed surface wall including taking down existing sub main wiring complete all as specified and as directed. Note : - Two runs of 6.0 Sqmm cable and one run of earth wire 6.0 sqmm & conduit shall be measured as one unit length and extra length of cable required for connection to MCBs shall be deemed to be include in unit rate quoted by bidder.

Taking down ceiling fan/exhaust fan of any sweep after disconnecting all necessary electrical connctions from ceiling rose to fan complete all as specified and directed.

Labour only for the refixing ceiling fan/exhaust fan after servicing /repairing/overhauling by cleaning/greasing /oiling etc. including provision of connecting ceiling fan/exhaust fan to ceiling rose including three core flexible copper cable of size 1.5 sqmm not less than 0.5 mtr long for connection and preparation of old rusted surface of ceiling fans of any sweep by cleaning to remove only dust etc. and applying one coat of synthetic enamel (white shade) paint and marking MES number with non erasable marker pen with black colour complete all as specified & directed by Engineer-in-charge.

S & F in replacement of old unserveciable single core of flexible wire of size 0.50 sq.mm for connection of inverter points from one junction box to other junction box complete all as specified & directed by Engineer-in-charge.

simplex infra project (BID ID -3080744)

M/S Bhushan Kumar Jain (BID ID -3081473)

M/S CHAUHAN CONSTRUCTION (BID ID -3083163)

M/S KAMLESHWAR SINGH (BID ID -3083078)

M/s Ramgarh Raj Construction Pvt Ltd (BID ID -3081784)

JP ENTERPRISES (BID ID -3081670)

Modernage Constructions Pvt. Ltd. (BID ID -3082608)