ANNUAL RATE CONTRACT FOR THE DIFFERENT TYPES OF SIGNAGES REQUIRED AT VARIOUS LOCATIONS IN THE SRFD PROJECT AREA.

BILL OF QUANTITIES

Name of Work :- ANNUAL RATE CONTRACT FOR THE DIFFERENT TYPES OF SIGNAGES REQUIRED AT VARIOUS LOCATIONS

IN THE SRFD PROJECT AREA

Sub Section Amount in Rs*

1 Sub Section : Civil (Signages) Works

Total Amount in Rs

Total Amount in Rs

I / We am / are willing to carry out work at _____________________ % above / below* percent (should be written in figures and words) of the

estimated cost, as mentioned above. Amount of my / our tender works out for Rs. ________________ (in figures)

Note : * Please strike out above or below, whichever is not applicable.

1. No extra payment shall be paid for material testing, soil testing and any other tests as required.

2. The unidentified utilities shall be shifted or reconstructed as per prevailing S.O.R rates of Ahmedabad Municipal Corporation/ R & B SOR.

Name of Work :- ANNUAL RATE CONTRACT FOR THE DIFFERENT TYPES OF SIGNAGES REQUIRED AT VARIOUS LOCATIONS

IN THE SRFD PROJECT AREA

Quantity Total amount

Quantity Total amount

Sr. estimated according to

Item of Work Unit GST

No but may be estimated quantities

more or less (In Rs.)

1 ACP sheet signage on Existing Pole/ New Pole: 10 Sqmt 4,670

Providing, making and fixing on existing pole Information Signs .

All signs to be done in Flexibond or equivalent having thickness of 4mm, approved

colour ACP of required size cut on CNC router cut machine. All edges and corner must

Matter and Graphics will be cut in approved colour 3M vinly Scotchlite Reflective Graphic

Films as per the final design. Pasting of vinly must be accurate as per the design on the

approved size ACP without any kind of buubles.

Rate shall also include the pasting of protective coating.

ACP plate should be fixed on existing pole with the angle/square pipe of 25 x25 welded

to the pole by 8mm thick MSflat. The rate shall also include cost of scaffolding, drilling,

fabrication, adhesive material etc at all height and all lead.

2 ACP sheet signage on Existing Pole/ New Pole: 160 Sqmt 4,170

Providing, making and fixing on existing pole Information Signs .

All signs to be done in Flexibond or equivalent having thickness of 4mm, approved

colour ACP of required size cut on CNC router cut machine. All edges and corner must

Matter and Graphics will be cut in approved colour 3M vinly Scotchlite Reflective Graphic

Films as per the final design. Pasting of vinly must be accurate as per the design on the

approved size ACP without any kind of buubles.

Rate shall also include the pasting of protective coating.

ACP plate should be fixed on existing pole with out any frame and to be fixed with

existing frame. The rate shall also include cost of scaffolding, drilling, fabrication,

adhesive material etc at all height and all lead.

3 ACP sheet signage on Existing Pole/ New Pole: 10 Sqmt. 8,306

Providing, Making and fixing 4 mm thick ACP sign of any shape and size and of

approved make to be cut on CNC router cutting and smoothen all corners and edges.

Matter shall be cut in 3M High intensity prismatic Reflective vinyl ASTM Type 4 and

paste on it as per design and detail and as per manufacturer's specifications. UV

stabilized lamination shall be done on it. The ACP sheet shall be fixed with clamp and

angle on new or existing MS Pole as per drawing. Content of sign shall be letters (In

Gujarati & English), graphics / maps, signs, arrows, etc. in any colour as per design,

drawing and approved by Architect and Engineer. All side of box shall be covered with

fresh ACP sheet, but only one side elevation area shall be measured and paid in sqmt.

Cost of MS Pole and Civil works shall be paid as per relevant tender items. The rate

shall also include cost of scaffolding, drilling, fabrication, finishing, self adhesive tape of

3M, back and sides plain acp sheet, , angle, fixing charges, etc at all height and all lead.

4 Signage pole-1.2 mt height 20 Nos. 2,350

Providing, making and fixing Signage pole.

76.1 mm outer dia pole 3.6mm thick with the angle already welded to the pole. The

whole Pole height should be 1.2mt, 0.3mt under ground level and 0.9mt above ground

level. An angle of size 50 x 50 x 2mm thick and 300mm long welded to the pole as a

anchor of the pole. Pole should be painted by one coat of Zinc comet primer and two

coat of aluminium approved paint. The rate shall also include cost of excavation,

foundation by concrete 1:2:4 as per the approved foundation details, all related civil

work, scaffolding, drilling, fabrication, adhesive material etc at all height and all lead.

5 Signage Pole -3.3 mt height 5 Nos. 6,450

76.1mm outer dia 3.6 mm thick pole with the angle already wlded to the pole. The whole

Pole height should be 3.3mt, 0.9mt under ground level and 2.4mt above ground level. An

angle of size 50 x 50 x 2mm thick and 300mm liong welded to the pole as a anchor of

the pole. Pole should be painted by one coat of Zinc comet primer and two ocat of

aluminium approved paint. The rate shall also include cost of excavation, foundation by

concrete 1:2:4 as per the approved foundation details, all related civil work, scaffolding,

drilling, fabrication, adhesive material etc at all height and all lead.

6 Signage Pole -4.9 mt height 5 Nos. 7,950

76.1mm outer dia 3.6 mm thick pole with the angle already wlded to the pole. The whole

Pole height should be 4.9mt, 0.9mt under ground level and 4mt above ground level. An

angle of size 50 x 50 x 2mm thick and 300mm liong welded to the pole as a anchor of

the pole. Pole should be painted by one coat of Zinc comet primer and two ocat of

aluminium approved paint. The rate shall also include cost of excavation, foundation by

concrete 1:2:4 as per the approved foundation details, all related civil work, scaffolding,

drilling, fabrication, adhesive material etc at all height and all lead.

7 SS Plate Signs : 3 Sqmt. 45,746

Providing Making and fixing SS plate signs on 2mm thick ISI Brushed S.S. Grade

plate with acid etching and duco painting. All plates will be made in CNC Water Jet

Cutting, with all edges smoothen and all corner to be cute round. Acid etching should be

done 0.3mm deep and Use ICI duco paint for colour infill of approved colour. The plate

will be fixed on wall with the stud/ fastener/ adhesive tape of 3M, jointing sealant as per

design as per specification and approved by Architect or Engineer in charge. The rate

shall be inclusive of scaffolding, drilling, fasteners/ adhesive material etc. at all heights

as directed by engineer in charge. Only elevation area shall be measured and paid. The

contractor should submit the drawings based on concept design and do the sampling

and get it approval before execution.

8 Vinyl Stickers: 50 Sqmt. 4,239

Providing, Cutting & pasting of vinyl stickers of approved make and shade with

digitally printed graphic/ letter as per design and as directed by engineer in charge.

Pasting of vinyl must be accurate as per the design on the approved size ACP without

any kind of bubbles. The rate shall also include cost of scaffolding, drilling, fabrication,

finishing, adhesive material etc at all height and all lead. Only elevation area shall be

measured and paid in sqmt. The contractor should submit the drawings based on

concept design and do the sampling and get it approval before execution.

9 Providing and fixing sinange film of reflectorised Micro Prismatic Grade Sheet (Type-XI) 40 Sqmt. 3,571

of require size suitable for fixing on existing Trafic Bollard

10 SS signage: (For names in Entrance) 10 Nos. 14,860

Providing & Fixing SS Coating Letters (Gujarati/English Letters as per drawing)

signages with backlit of color as per shade approved by architect in SS - 304 satin/brush

finish plate of Height as below and 2" Embossed complete in accordance to the

drawings and instructions provided by the Architect and/or Engineer - in - Charge. The

rate shall be for a complete item including fixing at any location as per drawing including

providing special arrangement for scaffolding fixing on a finished side to the satisfaction

of Engineer - in - Charge.

a) 600 mm height

b) 300 mm height 10 Nos. 6,709

b) 150 mm height 10 Nos. 2,634

11 SS Plate Signs with Vinyl : 5 Sqmt. 27,270

Providing Making and fixing SS plate signs on 2mm thick ISI Brushed S.S. Grade

plate with vinyl letters pasted with necessary adhesives, etc as per instruction from

Architect/EIC. All plates will be made in CNC Water Jet Cutting, with all edges smoothen

and all corner to be cute round. Vinyl shall be of approved color. The plate will be fixed

on wall with the stud/ fastener/ adhesive tape of 3M, jointing sealant as per design as per

specification and approved by Architect or Engineer in charge. The rate shall be

inclusive of scaffolding, drilling, fasteners/ adhesive material etc. at all heights as

directed by engineer in charge. Only elevation area shall be measured and paid. The

contractor should submit the drawings based on concept design and do the sampling

and get it approval before execution.

12 Structural Steel 1,000 KG 150

Structural steel work in riveted, bolted or welded in built up sections including supplying,

fabricating, cutting, assembling, hoisting and fixing in position at all heights of all shapes

and size with all leads and lifts of YST 310 grade as per latest IS 4923, IS 1161, IS

for the work of recessed manhole cover, lighting bollard, Railing, Handrail, gate, flag

fixing sleeve pole, garbage box, ladder, signage pole, street furniture, insert plate,

treaded bolt and similar works etc. including cutting and welding the members as per

detailed drawing and design. The rate shall include sand blasting, degreasing (wet

cleaning) & preparation of rust free surface manually or mechanically, metal putty to

make the surface even and smooth, 1 coat of epoxy primer of 50 to 60 micron DFT (dry

film thickness) and 2 top coats of Metal PU Paint of having DFT 40 to 50 micron of

approved shade of MRF or equivalent paint as per manufacture’s specification over all

the surfaces of the steel sections or as specified in the drawing. (Only standard

measurements will be paid for as actual cut length used at site). Shop drawings for the

connection details shall be prepared for the approval of the architect.

13 Rate shall be inclusive

PU Painting of CNC /Handrail,

for the Railing, laser cutting,

flag wastage, welding,

fixing sleeve bending

garbage at site),

box, Street 50 Sqmt 313

furniture and other structural steel elements. The rate shall include preparation of rust

free surface manually or mechanically, metal putty to make the surface even and smooth

if required , 1 coat of Metal PU Paint of having DFT 40 to 50 micron of approved shade

of MRF or equivalent paint as per manufacture’s specification over all the surfaces of

the steel sections or as specified in the drawing.

14 Extra for any Equipment/Scaffolding for colour of pole height more than 4.00 mtr and 25 Nos. 1,000

fixing of board.

* Without GST, applicable GST will be paid extra