PROVN OF STORE SHED IN BSO YARD AT GE PALAMPUR FOR PROTECTION OF FURNITURE FROM HEAVY RAIN AT PALAMPUR MIL STN.

Amount

Grubbing up tree trunk including cutting of trunk portion girth exceeding 100cm and n exc 150cm protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out in any type of soil complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

Demolition of brickwork or stone masonry, built in Cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed.

M&L for plain cement concrete as in foundations, filling, post holes and mass concrete type C-2 1:4:8 (40mm graded aggregate crushed stone aggregate), complete all as specified and directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil complete all as specified and directed.

Removing excavated material (i.e, Soil of any description) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L for hardcore broken stones or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick plain cement concrete as in sub base type D-2 1:4:8 (using 40mm graded crushed stone aggregate) complete all as specified and directed.

Sand Cushioning 50mm thick for interlocking paver blocks including watering and consolidation complete all as specified.

M&L for Machine pressed rubberized precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey pigment complete all as specified.

M&L for Plain Cement concrete type B-1 1:2:4 (20mm graded aggreagate) as in , PCC coping including weathering, slightly rounded or chamfered angles and throating etc. complete all as specified.

S&F for Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet (Manglore Pattern) 0.50mm thick of an colour ( as approved by GE and Engineer in Charge) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour ( as approved by GE and Engineer in Charge) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for steel work in tubular trusses, posts for supports for truss including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS:1161- 1979 grade St.-240 complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in any type of soil complete all as specified and directed.

M&L for rolled sections as in posts and struts in runners for framed iron structures, fencing including cutting tops to shape (Swan Neck if required) as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete al as specified and directed.

S&F for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

M&L for preperation and applying two coats fo synthetic enameld paint over a coat of red oxide primer on new steel surface exc 10cm width or girth complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete complete all as specified and directed.

M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

S&F for rolling arrangements for smooth running of framed iron work over runner of any description as per site requirement fixed with welding to the framework complete all as specified and directed.

M&L for 15mm thick plastering in CM 1:4 on brick surface or concrete surface other than the fair faces of brickwalls as an external surfaces, surface finished even and smooth without using extra cement, mixed with water proofing compound complete all as specified and directed. Note: WPC shall be measured and paid seperately.

M&L for 10mm thick plastering in CM 1:6 on brick surface or concrete surface other than the fair faces of brick walls as an intenal surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc., and similar small articles conforming to Fe-410W, Gde-E-250, complete all as specified and directed.

M&L for preperation of new plastered or unplastered surfaces of walls and applying two coats of white wash, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165)complete all as specified and directed.

M&L for mild steel TMT bars 5 mm dia and over and including upto 10mm dia in stirrups and binders etc including cutting, binding bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to TMT Bars complete all as specified and directed .

M&L for plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts inclusive of connected items required for erection of mentioned items complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 20 mm thick screed bed or bedding layer of cement mortar 1:4 for laying floor finishes complete all as specified and directed.

S&F pressed steel frames for doors 105mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.

S&F factory made 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type one side is covered with decorative veneer including all connected items for smooth functioning of door complete all as specified and directed.

S&F 300mm long (length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

S&F 150mm long (length of bolt) aluminium anodised, barrel tower bolts of extruded section and fixedcomplete all as specified and directed

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed

S&F 140mm size floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and directed

S&F box type steel windows comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter including glass panes with side hung shutters with steel handle and steel peg stay dovetailed ot welded incl 2 Nos tower bolts 150mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to F I frame work , including other fittings, hinges, handles tarred hold fasts PCC blocks etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 incl two coats of synthetic enamel paint over a coat of red oxide primer including taking down old existing unserviceable windows with frame and shutter and grills complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

Supply only chain link MS galvanisd fencing, any size or type as per requirement of site and approved by GE complete all as specified and directed.

S&F for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid as per requirement of site complete all as specified and directed.

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for vitrified ceramic tiles (Light Shade) 10mm thick (square/rectangular) polished , area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick Screed bed of CM 1:4 Complete all as specified and directed.

M&L for glazed ceramic coloured tiles 450mm x 300mm x 7mm thick in wall/dado etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick backing /rendering bed in CM 1:4 complete all as specified and directed.

M&L for Non-skid ceramic white tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed/bedding layer in CM 1:6 complete all as specified and directed.

M&L for plain cement concrete M-10, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 75mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified & directed. Note:- The unit rate include for use of form work (straight or curved).

Mild steel bolts dia n exc. 12mm purpose made with round, hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M/S THAKUR ENTERPRISES