Day to Day Civil maintenance of BSNL buildings of Ludhiana SSA 4th cal

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

All kinds of soil.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :

20 mm dia (heavy type)

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Twin rubber stopper

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

Two or more coats on new work.

White washing with lime to give an even shade :

Old work (one or more coats) .

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :

Old work (one or more coats)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge.

With cement mortar 1:4 (1 cement : 4 fine sand).

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).

Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Of area 3 sq. metres and below

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge..

In cement mortar

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:

Of area 3 sq. metres and below

Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing white vitreous china water closet squatting pan (Indian type) :

Orissa pattern W.C. pan of size 580x440 mm

Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

10 litre capacity - White

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :

White solid plastic seat with lid

Providing and fixing kitchen sink including making all connections excluding cost of fittings.

White glazed fire clay sink of size 600x450x250 mm.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Flexible pipe

32 to 40mm dia

Providing and fixing 100 mm sand cast Iron grating for gully trap.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

100 mm inlet and 100 mm outlet

Sand Cast Iron S&S as per IS: 1729.

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.

Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall.

15 mm dia. nominal bore

20 mm dia. nominal bore

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anticorrosive bitumastic paint, cutting chases and making good the wall:

15 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work

20 mm dia. nominal bore

25 mm dia. nominal bore

Providing and fixing brass bib cock of approved quality :

15 mm nominal bore

Providing and fixing brass stop cock of approved quality :

15 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

25 mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :

100 mm diameter

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :

20 mm nominal bore.

25 mm nominal bore.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931:

15 mm nominal bore.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

15 mm nominal bore.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

15 mm nominal bore.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 :

15mm nominal bore

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.

15 mm nominal bore, 105 mm long. Weighing not less than 138 gms.

20 mm nominal bore, 120 mm long. Weighing not less than 198 gms.

Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40 gms.

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.

15 mm nominal bore with 45 cm length.

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.

15 mm nominal bore. Weighing not less than 32 gms.

20mm nominal bore. Weighing not less than 40 gms.

Cutting holes up to 30x30 cm in walls including making good the same:

With common burnt clay F.P.S. (non modular) bricks.

Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps:

150 mm diameter

Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) :

Rectangular manhole 90x80 cm with rectangular cover 600x450 mm of grade LD - 2.5

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

With stainless steel cover plate minimum 1.25 mm thickness.

Providing and fixing PTMT bib cock/ stop cock of approved quality and colour.

15mm nominal bore, 86 mm long. Weighing not less than 88 gms.

Providing and fixing PTMT pillar cock of approved quality and colour .

15mm nominal bore, 107 mm long. Weighing not less than 110 gms.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

With stainless steel cover plate minimum 1.25 mm thickness.

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.

Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing Brass gate valve with C.I. wheel of approved quality (screwed end) :

15 mm nominal bore

20mm nominal bore

Dismentling and Refixing of aluminium doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. cleat angle, Providing Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete after making necessary repair as per the directions of Engineer-in-charge. (Glazing, paneling to be paid for separately) :

For fixed and Movable portion

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :

12mm thick commercial plywood of ISI marked and BWR grade of approved make

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete.

Provding & fixing 6mm thick ply BWR grade ISI marked i/c cost of adhesive/nails etc. complete in all respect as per directioon of E-in-Charge

Repairs to existing wooden doors/windows/cupboard shutters by chiseling,cutting etc. wherever required all complete as per the directions of Engineer-in-Charge.

without dismantling/removing the shutter

with dismantling/removing the shutter

Providing and fixing pneumatic door closer of approved quality to the existing wooden door complete in alla respect as per direction of Engineer-in-charge.

Repair of existing hydraulic door closer or pneumatic door closer complete in all respect as per direction of Engineer-in-charge.

Repair of existing tower bolt, sliding door bolt , curtain rod , breacket, handle etc complete in all respect as per direction of Engineer-in-charge.

Supply of Carpenter/plumber to do the assigned job complete as per direction of Engineer-In-Charge. The necessary tools and plant has to be arranged by agency (Note: The material required for job will be paid extra ,if required).

Repairs to existing steel doors/windows/cupboard shutters by cutting,welding etc. wherever required with or without dismantling all complete as per the directions of Engineer-in-Charge.Cost includes the transportation of electric/gas welding plant to site.

without cutting, dismanling & without welding

with dismanling & welding

Repairs to Steel gate (Main or wicket gate) by dismantling it from its existing position and refixing the same at desired position as per direction of E-in-C. This item include dismanling of cement concrete, brick work required for dismantling the gate. This item also include cost of transporation, welding to parts of gate, supports or scaffolding required to attain line & level of gate etc.. Ths cost of cement concrete, brick work and new section of MS will be paid seperately.

Area of MS gate shutter upto 3.00 sq or below

Area of MS gate shutter of 3.00 sq or above

Removal of Plants like Pipal Plant etc. from the roofs,shafts and from other parts of the Building at all heights and removing its roots,And pouring solution of Chlorpyriphos E.C 20% in the root of plants and making good the same complete as per direction of Engineer-in-Charge.

Uprooting of plants by using scaffolding at all heights

Uprooting of plants without using scaffolding

Grouting of terracing covered with tile bricks of clause designation 125 with cement mortar 1:3 (1 Cement : 3 Fine Sand) mixed with 2% of integral water profing compound by weight of cement and finished neat complete as per direction of E-in-Charge

Repairing of defective PVC flushing cistern by replacing PVC fittings inside the cistern including providing the required handle etc of approved quality as per the directions of Engineer-in-Charge.

Repairing to defective high level C.I /low level PVC/chinaware flushing cistern from over flowing and set it right in working order by replacing washer etc. complete as per the directions of Engineer-in-Charge.

P/Fixing 100mm dia sand cast iron P or S trap of approved quality complete as per direction of -in-Charge

Providing and fixing 100 mm dia stainless steel grating with or without hole for nahni or floor traps

Re-setting of white viterous wash basin/sink of any size or PVC cistern of 10 litres capacity wherever required all complete as per direction of Engineer-in-Charge.

Dismantling indian WC pan of any size from its existiing position i/c dismantling of cement concrete of required width and depth and dismantling P or S trap from its position if required and disposal of unserviceable material beyond MC limit complete as per direction of E-in-C.

Dismantling & refixing the existing G.I. pipe and refixing the same i/c new fittings wherever reqd. as per direction of E-in-C.

(a) Dia 15mm to 25mm

Providing and fixing PVC pipe with necessary solvent complete as per direction of E-in-Charge:-

75mm dia

Providing and fixing PVC/PTMT spray jet to the existing European seat of appoved brand and manufacture complete in all respect as per direction of Enginner-in-Charge.

Providing and fixing Brass gate valve with C.I. wheel of approved quality (screwed end) :

15 mm nominal bore

20 mm nominal bore

Providing and Fixing CP Pillar Cock i/c dismantling the existing pillar cock complete as per direction of Engineer-In-Charge

Repairs to over head water storage PVC tanks placed at all floor levels by using M-seal/PVC welding or other sealing compound on all the joints/cracks all complete as per direction of Engineer-in-Charge.

Providing and fixing G.I fittings in existing GI water supply line to stop the leakage etc. all complete as per direction of Engineer-in-Charge.

G.I Nipples ( length up to 150 mm )/socket/elbow/reducer elbow/Tee

15mm dia to 25 mm dia

32mm to 40mm dia

P/F overhead PVC water storage tank cover of required size & shape with all accessories, and PVC locking arrangement at all floor levels complete as per direction of E-I-C.

Repairs to SCI rain water/sanitary pipes i/c dismantling from its existing position and refixing the same at all floor levels, if required by using M-seal or other sealing compound on all the leaked joints/cracks etc. all complete as per direction of Engineer-in-Charge. a) up to 100m dia

Providing and fixing CP/PVC waste of approved brand upto 40mm dia to wash basin/sink to complete as per directoin of E-in-Charge

Repairs to brass bib cock, stop cock, PVC connections ,shower,gate valve, ball cock by replacing washers or jumpers etc all complete as per direction of Engineer-in-Charge.

Repairs to C P brass bib cock, stop cock,angle valve by replacing brass spindle etc all complete as per direction of Engineer-in-Charge.

Repairs to C P concealed by replacing long brass spindle etc all complete as per direction of Engineer-in-Charge.

Repairing of Water Supply line to remove air from GI Pipe line to have free flow of water i/c dismantling and re-fixing existing G.I. Pipe i/s fittings wherever required as per direction of Engineer-In-Charge

15mm dia to 40mm dia

P & F PVC bend to the existing PVC cistern of short length/long length including dismantling and refixing the cistern complete and making good the floor as per dircetion of E-in-C.

Repairing of water supply line to remove leakage from GI/SCI pipe line to i/c dismantling road/concrete, eartwork and re-fixing the same existing GI/CI pipe line after rectifying by adhesive, rubber, lime etc. and refilling the earth complete as per direction of E-in-C,

50mm to 100mm dia

Repairing of core of wall by cement mortar, putty or white cement and making good the walls or floor as per direction of E-in-C.

Sealing the floor trap / P trap etc. after cleaning the traps removing all rubbish from the trap, sealing of concrete at joints with polymer and morter mixed with water proofing compound i/c dismantling and refixing of floor trap grating all complete as per direction of Engineer in Charge.

Set right false ceiling, by removing false ceiling tiles, straightening supprting angle/ channells etc, levelling and placing false ceiling tiles complete as per direction of Engineer-in-Charges

To carry out Civil Maintenace work of any nature outside Ludhiana Municipal limit, Distance from the Civil maintenace office Sanchar colony to location of maitenance work carried out. For measurement distance for both side (to and fro to be measured)

Credit for old dismantled/unserviceable material received from dismantling: -

Old M.S section/old scrap/M.S rolling shutter/M.S tubes/MS bar etc.

CI or SCI Pipes: -

100mm dia

Unserviceable wooden door/window shutter with or without chowkhats fittings

G.I. pipes

15 to 25mm nominal bore

32 to 40mm nominal bore

Brass bib cock/stop cock/ball valves/CP bibcock/CP stop cock,C.P angle cock,CP pillar cock,CP shower rose,brass gate valves, CP ring,CP brass towel rail etc. of all dia

PVC Bib cock,stop cock,ball cock/WC seat cover, internal fitting of low level PVC cistern etc.