REPAIR TO VARIOUS STEEL FURNITURE AND MISC ITEMS INCLUDING PAINTING AND POLISHING OF VARIOUS STEEL AND WOODEN FURNITURE ITEMS UNDER GE CLEMENT TOWN

Amount

TABLE DINING ORS (DRAWINGS NO : FD-165(M))

Removing old unserviceable top and S&F New top of 19 mm plain MDF Board Grade-I, Type-II ISI marked covered with 22 gauge aluminium sheet in one piece all as specified and shown in drawing.

Removing of unserviceable long rail/stiffner and S & F new long rail/stiffner of conduit pipe 25 mm, 1.6 mm thick as per drawing.

Removing of unserviceable short rail/stiffner and S & F new short rail/stiffner of conduit pipe 25 mm 1.6 mm thick as per drawing.

Removing of unserviceable legs rail and S & F new legs of conduit pipe 25 mm 1.6 mm thick as per drawing.

Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing.

M & L for welding to broken steel frame of Table Dining ORS as per drawing..

(g) M&L for spray painting one coats of syntetic enamel paint (Colour shade as approved by GE) over a coat of red oxide primer complete after preparation of surface by scrapping and removing dust dirt etc including denting as required all as specified and directed.

ALMIRAH LARGE STEEL WITH SHELVES (DRAWINGS NO : FD-67/104/1031)

Removing unserviceable handle and S & F CP handle 125 mm with nut and bolts as per drg.

Removing unserviceable locks and S&F lock (Make : Godrej) 6 lever as per drg.

Removing unserviceable locking device and S&F new device including MS Rod rest all as per drg.

Adjustment of the existing shelves by providing new clamps removing unserviceable clamps all as directed.

Taking out unserviceable hinges S&F new hinges of reqd size as per drg.

Taking out unserviceable legs S&F new legs made out of 1 mm MS sheet as per drg.

Taking out unserviceable shelves and S&F new shelve made out of 1mm MS sheet as per drawing.

Taking out unserviceable shutters and S&F new shutters made out of 1mm MS sheet as per drawing.

M & L for welding to broken steel frame of almirah large steel with shelves as per drawing.

M&L for spray painting one coats of synthetic enamel paint (Colour shade as approved by GE other than exisiting colour) over a coat of red oxide primer complete after preparation of surface by scrapping and removing dust dirt etc including denting as required all as specified and directed by Engr-in Charge.

ALMIRAH MEDIUM/ SMALL STEEL WITH SHELVES (DRAWINGS NO : FD-67/243/1032)

Removing unserviceable handle and S&F CP handle 125 mm with nut and bolts as per drawing.

Removing unserviceable locks and S&F lock (Make : Godrej) 6 lever as per drawing.

Removing unserviceable locking device and S&F new device including MS Rod rest all as per drawing.

Adjustment of the existing shelves by providing new clamps removing unserviceable clamps all as directed.

Taking out unserviceable hinges S&F new hinges of reqd size as per drawing..

Taking out unserviceable legs S&F new legs made out of 1 mm MS sheet as per drg.

Taking out unserviceable shelves and S&F new shelve made out of 1mm MS sheet as per drawing.

Taking out unserviceable shutters and S&F new shutters made out of 1mm MS sheet as per drawing.

M & L for welding to broken steel frame almirah medium/small steel with shelves.

M&L for spray painting one coats of syntetic enamel paint (Colour shade as approved by GE other than existing colour) over a coat of red oxide primer complete after preparation of surface by scrapping and removing dust dirt etc including denting as required all as specified and directed by Engr-in Charge.

LOCKER BED SIDE (DRAWINGS NO : FD-257/1029)

Removing unserviceable handle and S&F CP handle 100 mm as per drawing.

Removing unserviceable hasp and stepple and S&F new hasp and stapple chromiun plated as directed.

Taking out unserviceable hinges S&F new hinges of reqd size as per drawing.

Taking out unserviceable legs S&F new legs made out of 1 mm MS sheet as per drawing.

Taking out unserviceable shelves and S&F new shelve made out of 1mm MS sheet as per drawing.

Taking out unserviceable shutters and S&F new shutters made out of 1mm MS sheet as per drawing.

Taking out unserviceable conduit pipe and S&F new conduit pipe 20 mm dia of 1.6 mm thick MS CP as per drawing.

M & L for welding to broken steel frame of locker bed side.

M&L for spray painting one coats of syntetic enamel paint (Colour shade as approved by GE other than exisiting colour) over a coat of red oxide primer complete after preparation of surface by scrapping and removing dust dirt etc including denting as required all as specified and directed.

TABLE 3'x2' WITH DRAWER (DRAWINGS NO : FD-1008)

Removing old u/s top and S&F new Top shall be made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Ply /Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE with 6mm half round teak wood beading with fevicol and headless nails all round the edges as per drawing.

Taking out unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing.

Removing of unserviceable short rail/stiffener and S & F new short rail/stiffener of conduit pipe 25 mm 1.6 mm thick as per drawing.

Removing of unserviceable long rail/long stiffner and S & F new short rail/stiffner of conduit pipe 25 mm 1.6 mm thick as per drawing.

Removing unserviceable locks of drawer and S&F lock (Make : Godrej) 5 lever as per drawing.

Removing unserviceable drawers and S&F new drawers made out of 1mm thick MS sheet as per drawing.

Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing

M & L for welding to broken steel frame of table 3'x2' with drawer.

M&L for spray painting one coats of syntetic enamel paint (Colour shade as approved by GE other than existing colour) over a coat of red oxide primer complete after preparation of surface by scrapping and removing dust dirt etc including denting as required all as specified and directed.

TABLE STEEL (DRAWINGS NO : FD-1007/1016/1010/1012/1013)

Removing old u/s top and S&F new Top shall be made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Ply /Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE with 6mm half round teak wood beading with fevicol and headless nails all round the edges as per drawing..

Taking out unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing.

Removing of unserviceable short rail/stiffner and S & F new short rail/stiffner of conduit pipe 25 mm 1.6 mm thick as per drawing.

Removing of unserviceable long rail/long stiffner and S & F new short rail/stiffner of conduit pipe 25 mm 1.6 mm thick as per drawing.

Removing of unserviceable shoe and S & F new hard rubber shoe as per drawing.

M & L for welding to broken steel frame of table 3'x2' without drawer all as directed.

M&L for spray painting one coats of syntetic enamel paint (Colour shade as approved by GE other than exisiting colour) over a coat of red oxide primer complete after preparation of surface by scrapping and removing dust dirt etc including denting as required all as specified and directed.

TABLE 3'x3' STEEL (DRAWINGS NO : FD-1009)

Removing old u/s top and S&F new Top made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Ply /Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE with 6mm half round teak wood beading with fevicol and headless nails all round the edges as per drawing.

Taking out unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing.

Removing of unserviceable rail and S & F new rail of conduit pipe 25 mm 1.6 mm thick as per drawing.

Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing

M & L for welding to broken steel frame of table 3'x3' steel all as directed.

M&L for spray painting one coats of syntetic enamel paint (Colour shade as approved by GE other than exisiting colour) over a coat of red oxide primer complete after preparation of surface by scrapping and removing dust dirt etc including denting as required all as specified and direc ted.

TABLE OFFICE CLERK STEEL (DRAWINGS NO : FD-84/1004/1006)

Removing old u/s top and S&F new top made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Ply /Century/ Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE with 6mm half round teak wood beading with fevicol and headless nails all round the edges as per drawing.

Taking out unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing.

Adjustment of drawers where ever reqd as directed.

Removing unserviceable locks of drawer and S&F lock (Make : Godrej) 5 lever as per drawing.

Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing

M & L for welding to broken steel frame of table office clerk steel all as directed.

M&L for spray painting one coats of syntetic enamel paint (Colour shade as approved by GE other than exisiting colour) over a coat of red oxide primer complete after preparation of surface by scrapping and removing dust dirt etc including denting as required all as specified and directed.

TABLE OFFICE OFFICER STEEL (DRAWINGS NO : FD-1002,1003)

Removing old u/s top and S&F new top made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Ply /Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE with 6mm half round teak wood beading with fevicol and headless nails all round the edges.

Taking out unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing.

Removing unserviceable locks of drawer and S&F lock (Make : Godrej) 5 leveras per drawing.

Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing

M & L for welding to broken steel frame of table office officer steel all as directed.

M&L for spray painting one coats of syntetic enamel paint (Colour shade as approved by GE other than existing colour) over a coat of red oxide primer complete after preparation of surface by scrapping and removing dust dirt etc including denting as required all as specified and directed .

TEAPOY VERANDAH (DRAWINGS NO : FD/E6/MAP/17)

Taking out unserviceable legs and S&F new legs of existing shape and size as required duly welded to all the places as per drawing.

Removing old u/s top and S&F new top made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Ply /Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE with 6mm half round teak wood beading with fevicol and headless nails all round the edges.

Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing

M & L for welding to broken steel frame teapoy verandah all as directed.

Removing M&L for spray painting one coats of syntetic enamel paint (Colour shade as approved by GE other than exisiting colour) over a coat of red oxide primer complete after preparation of surface by scrapping and removing dust dirt etc including denting as required all as specified and directed.

BOOK CASE STEEL (DRAWINGS NO : FD-1028/69(M))

Shelf : M&L for removing old worn out Shelf from the Book Case Steel Supply and fixing of new shelf made out of 1 mm thick MS Sheet . Rest all as specified on drg and as directed..

Shutters : M&L for removing old worn out Shutters from the Book Case steel Supply and fixing of new Shutter made out of 1 mm thick MS Sheet with 3mm plane glass . Rest all as specified on drg and as directed .

Lock: M&L for removing old worn out lock from the Book Case steel Supply and fixing of new lock (Set of four lock with one set of key)(Make : Godrej). Rest all as specified on drg and as directed .

Handle: M&L for removing old worn out handle from book case steel supply and fixing of new handle of best quality . Rest all as specified on drg and as directed.

M & L for welding to broken steel frame of Book Case Steel all as directed.

Painting: M&L for spray painting one coats of syntetic enamel paint (Colour shade as approved by GE) over a coat of red oxide primer complete after preparation of surface by scrapping and removing dust dirt etc including denting as required all as specified and directed.

RACK STEEL (ANY TYPE) (DRAWINGS NO : FD-129/106 /1038 /1039)

Shelf : M&L for removing old worn out Shelf from the Rack Steel (Any Types) and Supply and fixing of new shelf made out of 1 mm thick MS Sheet . Rest all as specified on drg and as directed.

Angle Iron : M&L for removing old worn out angle iron from the Rack Steel (Any Types) and Supply and fixing of new slotted angle iron of size 40x40x5mm of required length with suitable nuts and bolts . Rest all as specified on drg and as directed.

Side : M&L for removing old worn out sides from the Rack Steel (Any Types)and Supply and fixing of new Sides made out of 1 mm thick MS Sheet . Rest all as specified on drg and as directed.

Back : M&L for removing old worn out back from the Rack Steel (Any Types) and Supply and fixing of new back made out of 1 mm thick MS Sheet . Rest all as specified on drg and as directed .

M & L for welding to broken steel frame of Rack Steel (Any Type)

Painting: M&L for spray painting one coats of syntetic enamel paint (Colour shade as approved by GE other than existing colour) over a coat of red oxide primer complete after preparation of surface by scrapping and removing dust dirt etc including denting as required all as specified and directed.

AIR REVOLVING/ CHAIR EXECUTIVE (DRAWINGS NO : (TP)

Seat & Back : Removing the existing old unserviceable seat and back from the chair and re-upholestering with new fabric containing material like Acrylic polyester, poly viscose, poly propylene of colour as approved by GE on PU foam of 50 mm 50 density fixed over 12 mm BWR plywood all as specified on drg and as directed (Fabric shall be as per sample kept in yard)

Castor Wheel : Removing the existing unserviceable or broken castor wheel and S&F New Castor wheel to the chair in suitable pattern/model to match the original all as specified on drg and as directed.

Handle : Removing the existing broken/ unserviceable handle from the chair and S&F new handle made out of Black Integral Skin Polyurethene reinforced with MS insert scratch and weather resistant to the chair in suitable pattern/model to match the original all as specified on drg and as directed.

Bottom Base : Removing the existing unserviceable or worn out bottom base from the Chair. Supply and fix new Base to the chair in suitable pattern/model to match the original all as specified on drg and as directed .

M & L for welding to broken steel frame of Chair revolving/Chair Executive all as directed.

Gas lifting Hydraulic System : Removing the existing unserviceable Gas lifting Hydraulic System of various types from the Chair. Supply and fix new Gas lifting Hydraulic System to the chair in suitable pattern/model to match in original all as specified on drg and as directed..

BED HARD (DRAWINGS NO : FD/E6/MAP/08(R))

Removing old u/s top and S&F new top of plywood (Make: Greenply/Century/Archidply) top 12mm thick BWR Grade ISI Marked confirming to IS-303 of Bed plywood (Make: Greenply/Century/Archidply) made to shape & size as shown on drawings, complete all as specified and directed by GE.

Removing old u/s headrest and S&F new headrest made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Ply /Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE. All as directed by GE and shown on drawing.

Removing old u/s footrest and S&F new footrest made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Ply /Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE. All as directed by GE and shown on drawing including dismatling of old unserviceable top without disturbing the other parts.

M & L for welding to broken steel frame of Bed Hard all as directed.

M&L for spray painting one coats of synthetic enamel paint (Colour Shade as approved by GE) over a coat of red oxide primer complete after preparation of surface by scrapping and removing dust dirt etc indluding denting as required all as directed by GE.

TABLE BED SIDE (DRAWINGS NO : FD//E6/MAP/15(R))

Removing old u/s top and S&F new Top made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Ply /Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE with 6mm half round teak wood beading with fevicol and headless nails all round the edges all as directed.

Removing old u/s top drawer and S&F new Top drawer made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Ply /Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE in front side with 12mm BWR grade plywood (Make: Greenply/Century/Archidply) in thrree sides and 6mm BWR plywood (Make: Greenply/Century/Archidply) as bottom along with Chromium Plated handles(Approved by GE) with all as specified and directed by GE. Plywood shall be of BWR Grade ISI Marked confirming to IS-303.

Removing old u/s bottom drawer and S&F new bottom drawer made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Ply /Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE in front side with 12mm BWR grade plywood (Make: Greenply/Century/Archidply) in three sides and 6mm BWR plywood (Make: Greenply/Century/Archidply) as bottom along with Chromium Plated handles (Approved by GE) all as specified and directed by GE. Plywood shall be of BWR Grade ISI Marked confirming to IS-303.

Removing old u/s side and S&F new Side made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Ply /Century/Action Tesa)) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE.

M & L for welding to broken steel frame of Table Bed side all as directed.

M&L for spray painting one coats of synthetic enamel paint (Colour Shade as approved by GE other than exisiting colour) over a coat of red oxide primer complete after preparation of surface by scrapping and removing dust dirt etc indluding denting as required all as directed by GE.

CHARPOY WITH HARD TOP (DRAWINGS NO : FD-/MAP/II/01)

Removing old u/s top and S&F plywood (Make: Greenply/Century/Archidply) top of size 1930X900MM, 12mm thick BWR Grade ISI Marked confirming to IS-303 of Charpoy with Hard top made to shape & size as shown on drawings, complete all as specified and directed by GE. 12/6mm thick half round teak wood beading shall be provide alround the edges of plywood with suitable adhesive and headless nails.

M & L for welding to broken steel frame of Charpoy with Hard Top.

M&L for spray painting one coats of synthetic enamel paint (Colour Shade as approved by GE other than existing colour) over a coat of red oxide primer complete after preparation of surface by scrapping and removing dust dirt etc indluding denting as required all as directed by GE.

TABLE COMPUTER (DRAWINGS NO : FD/E6/MAP/03)

Removing old u/s top and S&F new Top made of 18/19mm thick Prelaminated MDF Board exterior grade (Make: Green Ply /Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE with 6mm half round teak wood beading with fevicol and headless nails all round the edges.

Removing old u/s Shelves/bottom and S&F new shelves/bottom made of 18/19 mm thick prelaminated MDF Board (Make: Green Ply /Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I,Type-II of shade as approved by GE along with telescopic channel as directed by Engr-in-Charge

Removing old u/s side/partion and S&F new Side/partion made of 18/19 mm thick prelaminated MDF Board (Make : Greenlam/Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I,Type-II of shade as approved by GE.

M & L for welding to broken steel frame of Table computer all as directed.

Removing old u/s shoe and S&F new PVC adjustable shoe superior quality as approved by GE shall be provided.

M&L for spray painting one coats of synthetic enamel paint (Colour Shade as approved by GE other than existing colour) over a coat of red oxide primer complete after preparation of surface by scrapping and removing dust dirt etc including denting as required all as directed by GE.

CHAIR COMPUTER (DRAWINGS NO : FD/E6/MAP/01)

Replacement of unserviceable leatherite rexine/ tapestry of seat/back both and S & F new fabric containing material like Acrylic, Polyester, Poly viscose Poly propylene of colour as approved by GE all as specified in drg and directed.(Fabric shall be as per sample kept in yard).

Seat & Back: Removing the existing old unserviceable seat and back from the chair and re-upholstering with new Fabric containing material like Acrylic, Polyester, Poly viscose Poly propylene of colour as approved by GE on PU foam of 50mm 50 density fixed over 12mm BWR plywood all as specified on drg and as directed. (Fabric shall be as per sample kept in yard).

Removing of old/us gas lift and providing new gas lift maintenance free, environmental friendly chrome free cylinder tube shall be fixed in a MS black powder coated into centre column tube 38mm dia and 2mm thick, It shall have 100mm stroke length and gas pressure of 300 force all as specified in drg and directed.

M & L for welding to broken steel frame of Chair computer all as directed.

Replacement of old wheel and providing new wheel of computer chair superior quality as approved by GE.

DESK FOR SENIOR STANDARD 2 SEATER (DRAWINGS NO : FD-166(M))

Removing old unserviceable top and S & F new top made out of plywood (Make: Greenply/Century/Archidplyy) 18/19 mm thick BWR Grade ISI Marked confirming to IS-303 all as directed and shown in drg.

Removing old unserviceable bottom and S & F new bottom made out of plywood (Make: Greenply/Century/Archidply) 18/19 mm thick BWR grade ISI marked confirming to IS-303 with 4mm dia 50mm long semi circular nut and bolts with washers drilling holes including seat and conduit frame all as directed and shown in drg.

Removing unserviceable sides and S & F new sides made out of plywood (Make: Greenply/Century/Archidply) 18/19 mm thick BWR grade ISI marked confirming to IS-303 all as specified and shown in drg.

Removing old unserviceable back and S & F new back made out of plywood (Make: Greenply/Century/Archidply) 18/19 mm thick BWR grade ISI marked confirming to IS-303 all as specified and shown in drg.

M & L for welding to broken steel frame of Desk for Senior Standard 2 Seater complete all as specified and directed.

Removing unserviceable shoes and S & F new rubber shoe best quality all as directed.

M&L for spray painting of repaired Desk for senior standard 2 seater completer on all surface applying one coats of synthetic enamel paint (Colour Shade as approved by GE) over a coat of red oxide primer on iron surface and white primer on wooden surfaces complete after preparation of surface by scraping complete removal of existing paint complete and removing of dust dirt etc from wooden/iron surface including denting as as required on iron surface all as specified and shown on drg and directed by GE.

DESK FOR SECOND STANDARD 2 SEATER (DRAWINGS NO : FD-167(M))

Removing old unserviceable top and S & F new top made out of plywood (Make: Greenply/Century/Archidply) 18/19 mm thick BWR grade ISI marked confirming to IS-303 all as specified and shown in drg.

Removing old unserviceable bottom and S & F new bottom made out of plywood (Make: Greenply/Century/Archidply) 18/19 mm thick BWR grade ISI marked confirming to IS-303 with 4mm dia 50mm long semi circular nut and bolts with washers drilling holes including seat and conduit frame all as directed and shown in drg.

Removing unserviceable sides and S & F new sides made out of plywood (Make: Greenply/Century/Archidply) 18/19 mm thick BWR grade ISI marked confirming to IS-303 all as specified and shown in drg.

Removing unserviceable back and S & F new back made out of plywood (Make: Greenply/Century/Archidply) 18/19 mm thick BWR grade ISI marked confirming to IS-303 all as specified and shown in drg.

M & L for welding to broken steel frame of Desk for Second Standard 2 Seater.

Removing unserviceable shoes and S & F new rubber shoe best quality all as directed.

M&L for spray painting of repaired Desk for second standard 2 seater complete on all surfaces applying one coats of synthetic enamel paint (Colour Shade as approved by GE) over a coat of red oxide primer on iron surface and white primer on wooden surfaces complete after preparation of surface by scraping complete, removal of existing paint complete, and removing of dust, dirt etc from wooden/iron surface including denting as required on iron surface all as specified and shown on drg and directed by GE.

CHAIR FOR SENIOR/ MIDDLE STANDARD (DRAWINGS NO : FD-169(M))

Removing unserviceable seat and S & F new seat made out of plywood (Make: Greenply/Century/Archidply) 12 mm thick BWR grade ISI marked confirming to IS-303 with 4mm dia 50mm long semi circular nut and bolts with washers drilling holes including seat and conduit frame all as directed and shown in drg.

Removing unserviceable back and S & F new back made out of plywood (Make: Greenply/Century/Archidply) 12 mm thick BWR grade ISI marked confirming to IS-303 with 4mm dia 50mm long semi circular nut and bolts with washers drilling holes including seat and conduit frame all as directed and shown in drg.

Removing unserviceable shoes and S & F new rubber shoe best quality all as directed.

M & L for welding to broken steel frame of Chair for Senior/Middle Standard all as directed.

M&L for spray painting of repaired Chair for senior/middle standard 2 seater complete on all surfaces by applying one coats of synthetic enamel paint (Colour Shade as approved by GE) over a coat of red oxide primer on iron surface and white primer on wooden surfaces complete after preparation of surface by scraping complete, removal of existing paint complete, and removing of dust, dirt etc from wooden/iron surface including denting as required on iron surface all as specified and shown on drg and directed by GE.

CHAIR SCHOOL WITH HAND BOARD (DRAWINGS NO : FD/E6/MAP/05)

Removing old unserviceable seat/back of Chair and S&F one piece PVC Seat and back virgin quality as approved by GE all as specified and shown on drg.

Removing old unserviceable hand board of Chair and S&F new hand board top openable fixed on right hand side made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Greenply/Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE with standard PVC edging as specified and shown on drg.

M & L for welding to broken steel frame of Chair School with Hand Board all as direceted.

M&L for spray painting one coats of synthetic enamel paint (Colour Shade as approved by GE) over a coat of red oxide primer complete after preparation of surface by scrapping and removing dust dirt etc indluding denting as required all as directed by GE.

CHAIR VARANDAH (DRAWINGS NO : FD/MAP-II/06)

M & L for Welding to broken steel frame of chair varandah by welding complete all as directed

S&F 4 mm thick PVC sheet for seat (Make:- Classic,Amko,cello) of Chair Verandah complete all as shown on drawing and as directed.

S&F 4 mm thick PVC sheet for back (Make:- Classic,Amko,cello) of Chair Verandah complete all as shown on drawing and as directed .

Taking down old unserviceable shoes and S & F rubber/PVC shoes to to leg of chair varandah complete all as specified and directed.

M&L for spray painting one coats of synthetic enamel white paint complete ater prepartion of surface by scrapping and removing dust dirt etc including denting as required complete all as specified and as directed.

PAINTING : M & L for Spray / Brush paint, where ever directed with one coat of Synthetic enamel paint of approved shade to the following furniture articles both internal/external sides, wherever applicable, all are of MES pattern viz F/DB/HF/FD series or similar TP items of MES charge, including removing of dents, applying putty to level the surface before painting all as specified and directed by the Engr-in-charge. Work will be executed where furniture exist in User unit OTM, Md Accns and BS Furniture yard under jurisdiction of GE Clement Town Dehradun as directed by the Engr-in-Charge

Almirah large Steel (DRAWINGS NO : FD-67/104/1031)

Almirah Medium Steel (DRAWINGS NO : FD-67/243/1032)

BOOK CASE STEEL (DRAWINGS NO : FD-69(|M)1028)

BED HARD (DRAWINGS NO : FD/E6/MAP/08|(|R))

Charpoy IP Hard Top (DRAWINGS NO : FD-388(R )/FD/MAP-II/01)

Chair school with Hand Board (DRAWINGS NO : FD/E6/MAP/05)

Chair CB Steel with Arms (DRAWINGS NO : FD-75/120(M))

Chair Verandah (DRAWINGS NO : FD-256/FD-359/FD/MAP-II/06)

Locker Bedside steel (DRAWINGS NO : FD-257/1029)

Form with out back (DRAWINGS NO : FD-77/1027)

Rack Steel (Any Types) (DRAWINGS NO : FD-129/106 /1038 /1039)

Rack Shoes steel (DRAWINGS NO : FD/E6/MAP/02R)

Table dining OR (DRAWINGS NO : FD-165(M))

Table steel (DRAWINGS NO : FD-)

Table Office Clerk Steel (DRAWINGS NO : FD-84/1004/1006/1007)

Table Office Officer Steel (DRAWINGS NO : FD-1003/1002)

Trestle store room steel (DRAWINGS NO : FD-1043)

POLISHING : M & L for one coat of French polish to the following furniture articles all are of MES pattern viz F/DB/FD/HF series or similar TP items of MES charge, including scrapping & cleaning the dirts on the surface and applying wax for drepressed surface before polishing all as specified and directed by the Engr-in-charge.Work will be executed where furniture exist in User unit OTM, Md Accns and BS Furniture yard under jurisdiction of GE Clement Town Dehradun as directed by the Engr-in-Charge

Bed hard ply top (DRAWINGS NO : FD-246)

Book Self small (DRAWINGS NO : DB-4121)

Chair dininig (DRAWINGS NO : FD-279/357)

Chair Easy (DRAWINGS NO : FD-229/358)

Table Dining 6/8 Persons and (1200x900) (DRAWINGS NO : FD-273/ FD /MAP -II/03)

Table Bed side (DRAWINGS NO : FD-276/248)

Teapoy (DRAWINGS NO : FD-278/382)

Table Peg (DRAWINGS NO : FD-384/277)

Locker OR wooden (DRAWINGS NO : DB-4074)

Rack wooden for storage 6'x2'x6 (DRAWINGS NO : TP/DB-4123)

Sofa Set Four Seater (DRAWINGS NO : FD-281 (FD/ MAP-II/02))

Sofa Set Five Seater (DRAWINGS NO : FD-281 (FD/ MAP -II/02))

M/SDoon furnishers